September 2026 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Tue Sep 1 01:04:11 UTC 2026
Ending: Wed Sep 30 23:22:24 UTC 2026
Messages: 2984

• (subset) [PATCH v2 0/2] riscv: spacemit: add pinctrl support for K3 SoC   Yixun Lan
• [0/4] dm: gpio: read GPIOs in of_to_plat(), request them in probe()   Simon Glass
• [0/8] Almost complete Raspberry Pi 5 support   Simon Glass
• [0/9] boot: add imagemap on-demand image loading from storage   Simon Glass
• [0/9] boot: add imagemap on-demand image loading from storage   Daniel Golle
• [ANN] Meetup during the Embedded Linux Conference / Open-Source Summit Europe 2026 in Prague   Neil Armstrong
• [ANN] U-Boot v2026.10-rc4 released   Tom Rini
• [ANN] U-Boot v2026.10-rc5 released   Tom Rini
• [ANN] U-Boot v2026.10-rc5 released   Yao Zi
• [ANN] U-Boot v2026.10-rc5 released   Tom Rini
• [ANN] U-Boot v2026.10-rc5 released   E Shattow
• [ANN] U-Boot v2026.10-rc5 released   E Shattow
• [BUG] rockchip: v2026.07 fails to boot on GameForce Ace (RK3588S)   Daniel Martin
• [DO-NOT-APPLY] Support MACB ether inside RPi5 RP1   Torsten Duwe
• [GIT PULL] amd/xilinx/fpga patches for v2026.10-rc3   Michal Simek
• [GIT PULL] amd/xilinx/fpga patches for v2026.10-rc3   Tom Rini
• [GIT PULL] amd/xilinx/fpga patches for v2027.01-rc1   Michal Simek
• [GIT PULL] amd/xilinx/fpga patches for v2027.01-rc1   Tom Rini
• [GIT PULL] Please pull fsl-qoriq-for-2026.10-rc4   Peng Fan
• [GIT PULL] Please pull fsl-qoriq-for-2026.10-rc4   Tom Rini
• [GIT PULL] Please pull fsl-qoriq-next-2026-09-14 for next   Peng Fan
• [GIT PULL] Please pull fsl-qoriq-next-2026-09-14 for next   Tom Rini
• [GIT PULL] Please pull mediatek-for-next-2026-09-02 into next   David Lechner
• [GIT PULL] Please pull mediatek-for-next-2026-09-02 into next   Tom Rini
• [GIT PULL] Please pull mediatek-for-next-2026-09-21 into next   David Lechner
• [GIT PULL] Please pull mediatek-for-next-2026-09-21 into next   Tom Rini
• [GIT PULL] Please pull mmc-next-2026-09-14   Peng Fan
• [GIT PULL] Please pull mmc-next-2026-09-14   Tom Rini
• [GIT PULL] Please pull mmc-next-2026-09-26   Peng Fan
• [GIT PULL] Please pull mmc-next-2026-09-26   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-20260914 into main   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20260914 into main   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-20260929 into main   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20260929 into main   Tom Rini
• [GIT PULL] Please pull u-boot-imx-main-20260906   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-main-20260906   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20260906   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-next-20260906   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20260911   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-next-20260911   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20260926   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-next-20260926   Tom Rini
• [GIT PULL] Please pull u-boot-nvme-fixes-20260911   Neil Armstrong
• [GIT PULL] Please pull u-boot-nvme-fixes-20260911   Tom Rini
• [GIT PULL] Please pull u-boot-pci-fixes-20260911   Neil Armstrong
• [GIT PULL] Please pull u-boot-pci-fixes-20260911   Tom Rini
• [GIT PULL] Please pull u-boot-rockchip-2026.10-20260918 into main   Quentin Schulz
• [GIT PULL] Please pull u-boot-rockchip-2026.10-20260918 into main   Tom Rini
• [GIT PULL] Please pull U-Boot spacemit-next-20260929   Yixun Lan
• [GIT PULL] Please pull U-Boot spacemit-next-20260929   Tom Rini
• [PATCH 0/2] Add Ethernet support for Maxio MAE0621A PHYs on EQOS MACs   kongchen
• [PATCH 0/2] Add i.MX91 9x9 QSB support   alice.guo at oss.nxp.com
• [PATCH 0/2] Add support to auto-probe Torrent PHY driver for J7200   Aksh Garg
• [PATCH 0/2] Add support to auto-probe Torrent PHY driver for J7200   Aksh Garg
• [PATCH 0/2] Avoid needless CONFIG_TPL_BUILD checks for U-Boot proper build   Massimo Pegorer
• [PATCH 0/2] Avoid needless CONFIG_TPL_BUILD checks for U-Boot proper build   Massimo Pegorer
• [PATCH 0/2] board: xilinx: Fix board name overflow and allow board ft_board_setup()   Sriram Sriram
• [PATCH 0/2] bootstd: rauc: Fix stack overflow with over-long slot names   Tom Rini
• [PATCH 0/2] clk: mediatek: fix some clock definitions   David Lechner
• [PATCH 0/2] clk: mediatek: fix some clock definitions   Julien Stephan
• [PATCH 0/2] Close the FIT signature fail-open on the image gate   Eva Crystal
• [PATCH 0/2] Close the FIT signature fail-open on the image gate   Tom Rini
• [PATCH 0/2] doc: board: ti: openocd tcl script fixes   Bryan Brattlof
• [PATCH 0/2] efi: fix and test FMP image info authentication attribute   Vincent Stehlé
• [PATCH 0/2] Enable NET_RANDOM_ETHADDR config options for   Chintan Vankar
• [PATCH 0/2] Enable NET_RANDOM_ETHADDR config options for   Vignesh Raghanvendra
• [PATCH 0/2] Enable NET_RANDOM_ETHADDR config options for   Chintan Vankar
• [PATCH 0/2] Enable NET_RANDOM_ETHADDR config options for   Tom Rini
• [PATCH 0/2] Enable NET_RANDOM_ETHADDR config options for   Vankar, Chintan
• [PATCH 0/2] image-fit-sig: close the image-signature fail-open gate   Eva Crystal
• [PATCH 0/2] lib: Allow unaligned memory access from decompressors selectively   Alexey Charkov
• [PATCH 0/2] lib: Allow unaligned memory access from decompressors selectively   Tom Rini
• [PATCH 0/2] lib: make the clearing stores in lib/ real   Xiaoyi Suo
• [PATCH 0/2] lib: make the clearing stores in lib/ real   Tom Rini
• [PATCH 0/2] net: mdio-mux: Recover gracefully from bad parents   Sean Anderson
• [PATCH 0/2] pci: versal: Enable AMD DW PCIe controller for Versal Premium Gen 2   Michal Simek
• [PATCH 0/2] pinctrl: fix on Spacemit K1 SoC   Eric Chung
• [PATCH 0/2] pinctrl: fix on Spacemit K1 SoC   Yixun Lan
• [PATCH 0/2] pinctrl: mediatek: add support for MT8196   Arnaud Ferraris
• [PATCH 0/2] power: domain: mediatek: power up the SRAM-isolated MT8189 domains   David Lechner
• [PATCH 0/2] reset: zynqmp: move reset_assert() into firmware driver   Michal Simek
• [PATCH 0/2] riscv: cv1800b: Milk-V Duo boot fixes   Hiago De Franco
• [PATCH 0/2] riscv: spacemit: add ethernet support for K3 SoC   Yixun Lan
• [PATCH 0/2] rock-pi-4b: add config and fix dt   Jean-Paul Etienne
• [PATCH 0/2] rock-pi-4b: add config and fix dt   Quentin Schulz
• [PATCH 0/2] rock-pi-4b: add config and fix dt   Jean-Paul Etienne
• [PATCH 0/2] SPI/NOR Flash Fixes   Anirudh Srinivasan
• [PATCH 0/2] STM32MP2: Restore boot for MP23/MP25 DK boards   Patrice Chotard
• [PATCH 0/2] test: spl: Cover zstd and gzip FIT decompression   Cole Munz
• [PATCH 0/2] video: fix build with VIDEO && !VIDEO_LOGO   Julien Stephan
• [PATCH 0/2] video: fix build with VIDEO && !VIDEO_LOGO   Julien Stephan
• [PATCH 0/3] Add Genio 510 and 700 BootROM download agents   Carlo Caione
• [PATCH 0/3] Add MediaTek MT8365 power domain support   Julien Stephan
• [PATCH 0/3] binman: pre-load: Allow signing with an OpenSSL engine   Lorenz Kofler
• [PATCH 0/3] binman: pre-load: Allow signing with an OpenSSL engine   Lorenz Kofler
• [PATCH 0/3] board: beacon: Remove i.MX8M Beacon EmbeddedWorks boards   Adam Ford
• [PATCH 0/3] board: beacon: Remove i.MX8M Beacon EmbeddedWorks boards   Tom Rini
• [PATCH 0/3] board: sophgo: milkv_duo: enable standard boot   Hiago De Franco
• [PATCH 0/3] clk: mediatek: propagate rate requests   David Lechner
• [PATCH 0/3] configs: sei510/sei610: drop Android support   Guillaume La Roque
• [PATCH 0/3] configs: sei510/sei610: drop Android support   Neil Armstrong
• [PATCH 0/3] configs: STM32MP2: Update config for STM32 SoCs   Patrice Chotard
• [PATCH 0/3] drivers: add support for MediaTek MT6373 PMIC over SPMI   Arnaud Ferraris
• [PATCH 0/3] fastboot: spi: add generic OEM SPI-NOR re-bring-up command   Vandhiadevan Karunamoorthy
• [PATCH 0/3] fsl, powerpc: Fix SPD read and appended DTB alignment   Josef Schlehofer
• [PATCH 0/3] fsl, powerpc: Fix SPD read and appended DTB alignment   Tom Rini
• [PATCH 0/3] pci: enable designware pci and phy on spacemit k1 SoC   Yixun Lan
• [PATCH 0/3] phy: mediatek: add MIPI DSI PHY driver   Julien Stephan
• [PATCH 0/3] phy: mediatek: add MIPI DSI PHY driver   David Lechner
• [PATCH 0/3] riscv: Add a common memory FDT fixup   Junhui Liu
• [PATCH 0/3] riscv: mpfs: move system controller configs to CPU Kconfig   Jamie Gibbons
• [PATCH 0/3] soc/board: decouple SoC identification reads from firmware calls   Michal Simek
• [PATCH 0/4] Add ADLINK LEC-iMX95 board support   Dinesh kumar v via B4 Relay
• [PATCH 0/4] Add preliminary support for MSM8917   Reza Kurniawan
• [PATCH 0/4] Apple NVMe fixes for macOS 15+ firmware / M4 support   Janne Grunau
• [PATCH 0/4] Apple NVMe fixes for macOS 15+ firmware / M4 support   Neil Armstrong
• [PATCH 0/4] Apple NVMe fixes for macOS 15+ firmware / M4 support   Mark Kettenis
• [PATCH 0/4] Apple NVMe fixes for macOS 15+ firmware / M4 support   Neil Armstrong
• [PATCH 0/4] arm: carry and filter previous bootloader's bootargs   Petr Hodina via B4 Relay
• [PATCH 0/4] arm: dts: am43xx: Switch to OF_UPSTREAM   Markus Schneider-Pargmann (TI)
• [PATCH 0/4] Bounds/overflow hardening in NFS, FIT, TFTP and ext4   Sriram Sriram
• [PATCH 0/4] configs: khadas-vim3: refresh Android support   Guillaume La Roque
• [PATCH 0/4] configs: khadas-vim3: refresh Android support   Neil Armstrong
• [PATCH 0/4] dm: gpio: read GPIOs in of_to_plat(), request them in probe()   Mehmet Fide
• [PATCH 0/4] dm: gpio: read GPIOs in of_to_plat(), request them in probe()   Simon Glass
• [PATCH 0/4] imx95/94/952: Enable early icache/dcache in SPL and U-Boot   ye.li at oss.nxp.com
• [PATCH 0/4] imx95/94/952: Enable early icache/dcache in SPL and U-Boot   Francesco Dolcini
• [PATCH 0/4] imx95/94/952: Enable early icache/dcache in SPL and U-Boot   Ye Li
• [PATCH 0/4] imx95/94/952: Enable early icache/dcache in SPL and U-Boot   Francesco Dolcini
• [PATCH 0/4] imx95/94/952: Enable early icache/dcache in SPL and U-Boot   Ye Li
• [PATCH 0/4] mtd: spi-nor: split SFDP, ID database, and fixups   Tom Rini
• [PATCH 0/4] mtd: spi-nor: split SFDP, ID database, and fixups   Tom Rini
• [PATCH 0/4] mtd: spi-nor: split SFDP, ID database, and fixups   Takahiro.Kuwano at infineon.com
• [PATCH 0/4] mtd: spi: Expose SPI-NOR as a GPT-capable MTD block device   Vandhiadevan Karunamoorthy
• [PATCH 0/4] mtd: spi: Expose SPI-NOR as a GPT-capable MTD block device   Mike Looijmans
• [PATCH 0/4] power: domain: mtk: add mt8366 power domain   David Lechner
• [PATCH 0/4] riscv: spacemit: Add support for K3 Pico-ITX board   Yixun Lan
• [PATCH 0/4] riscv: spacemit: Add support for K3 Pico-ITX board   E Shattow
• [PATCH 0/4] rockchip: Always init clocks in SPL build for RK35xx   Heiko Stübner
• [PATCH 0/4] sdm845: Configure USB3/DP combo properly   Casey Connolly
• [PATCH 0/5] Add AMD Versal CPM/QDMA PCIe support   Michal Simek
• [PATCH 0/5] efi: ECPT EBBR conformance profiles   Vincent Stehlé
• [PATCH 0/5] mtd: spinand: sync with linux-7.3   Mikhail Kshevetskiy
• [PATCH 0/5] splash: documentation and more storage support   David Lechner
• [PATCH 0/6] power: domain: mtk: add support for MT8189   David Lechner
• [PATCH 0/6] power: domain: mtk: add support for MT8189   David Lechner
• [PATCH 0/6] spi: decouple cadence QSPI/OSPI from direct firmware calls   Akshay Belsare
• [PATCH 0/6] video: mipi_dsi: add common {generic,dcs}_write_seq helper macros   David Lechner
• [PATCH 0/7] Enable PCI functionality on AM654 at U-Boot proper   Siddharth Vadapalli
• [PATCH 0/7] qcom: add support for the Arduino VENTUNO Q (QCS8275)   Tyler Baker
• [PATCH 0/7] Software ECDSA verification for FIT images   Ayoub Zaki
• [PATCH 0/7] Software ECDSA verification for FIT images   Raymond Mao
• [PATCH 0/7] Software ECDSA verification for FIT images   Ayoub Zaki
• [PATCH 0/7] Software ECDSA verification for FIT images   Philippe Reynes
• [PATCH 0/7] Software ECDSA verification for FIT images   Raymond Mao
• [PATCH 0/8] Almost complete Raspberry Pi 5 support   Torsten Duwe
• [PATCH 0/8] Almost complete Raspberry Pi 5 support   Filip Kokosiński
• [PATCH 0/8] Almost complete Raspberry Pi 5 support   Torsten Duwe
• [PATCH 0/8] Almost complete Raspberry Pi 5 support   Filip Kokosiński
• [PATCH 0/8] mmc: arm_pl180: Improve clocks, supplies and PIO   Linus Walleij
• [PATCH 0/8] net: mrmac: Fix Rx packet loss on back-to-back frames   Michal Simek
• [PATCH 0/9] rockchip: Remove unneeded syscon driver for RK35xx   Massimo Pegorer
• [PATCH 0/9] rockchip: Remove unneeded syscon driver for RK35xx   Jonas Karlman
• [PATCH 00/10] net: share the lwIP runtime and support netconsole   Jerome Forissier
• [PATCH 00/10] spl: ufs: Add support for loading U-Boot from boot W-LU   Alexey Charkov
• [PATCH 00/10] spl: ufs: Add support for loading U-Boot from boot W-LU   Neil Armstrong
• [PATCH 00/11] clk: mediatek: code cleanup   Julien Stephan
• [PATCH 00/11] imagemap: fixes from the v1 review   Daniel Golle
• [PATCH 00/11] spl: fit: Generalize compression support   Alexey Charkov
• [PATCH 00/13] mediatek: add DSI panel support for MT8365 and MT8366 boards   Julien Stephan
• [PATCH 00/14] board: ti: update and correct files MAINTAINERS entries   Tom Rini
• [PATCH 00/14] tree-wide: check dev_remap_addr() for NULL   David Lechner
• [PATCH 00/14] tree-wide: check dev_remap_addr() for NULL   Tom Rini
• [PATCH 00/15] clk: mediatek: merge single ops into mtk_clk_ops   David Lechner
• [PATCH 00/15] clk: mediatek: merge single ops into mtk_clk_ops   Julien Stephan
• [PATCH 00/15] rockchip: Miscellaneous RK35xx clock fixes   Heiko Stübner
• [PATCH 00/17] pylibfdt: Update the U-Boot version with changes from upstream dtc   Tom Rini
• [PATCH 00/20] net: lwip: restore BOOTP, DHCPv4 boot policy and PXE parity   James Hilliard
• [PATCH 01/10] ufs: hand sense data to the SCSI layer   Alexey Charkov
• [PATCH 01/10] ufs: hand sense data to the SCSI layer   Neil Armstrong
• [PATCH 01/10] ufs: hand sense data to the SCSI layer   Alexey Charkov
• [PATCH 01/11] boot: image: Keep the image-type table out of xPL   Alexey Charkov
• [PATCH 01/11] boot: image: Keep the image-type table out of xPL   Tom Rini
• [PATCH 01/11] clk: mediatek: mt8188: make the clock trees static   Julien Stephan
• [PATCH 01/11] mtd: bind the block device without leaking on failure   Daniel Golle
• [PATCH 01/13] memory: mediatek: mtk-smi: support smi_common and the larb ports   Julien Stephan
• [PATCH 01/14] power: pmic: mtk-pwrap: check dev_remap_addr() for NULL   David Lechner
• [PATCH 01/15] clk: mediatek: add fclks_offs to struct mtk_clk_tree   David Lechner
• [PATCH 01/15] clk: rockchip: pll: Fix double use of postdiv1   Massimo Pegorer
• [PATCH 01/15] misc: fs_loader: Add QSPI RAW partition loading support   Chee, Tien Fong
• [PATCH 01/15] misc: fs_loader: Add QSPI RAW partition loading support   LOK, CHEN HUEI
• [PATCH 01/20] net: lwip: bound NFS filename parsing and release its copy   James Hilliard
• [PATCH 01/30] sysreset: rockchip: Add rockchip_sysreset_bind() helper   Massimo Pegorer
• [PATCH 01/30] sysreset: rockchip: Add rockchip_sysreset_bind() helper   Massimo Pegorer
• [PATCH 01/30] sysreset: rockchip: Add rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 01/30] sysreset: rockchip: Add rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 01/30] sysreset: rockchip: Add rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 02/10] scsi: repeat an INQUIRY that a unit attention interrupted   Alexey Charkov
• [PATCH 02/11] clk: mediatek: add a helper to declare gate-only clock trees   Julien Stephan
• [PATCH 02/11] clk: mediatek: add a helper to declare gate-only clock trees   David Lechner
• [PATCH 02/11] clk: mediatek: add a helper to declare gate-only clock trees   Julien Stephan
• [PATCH 02/11] cmd: ubi: report a failed UBI block device bind   Daniel Golle
• [PATCH 02/11] lib: Build xxhash in the SPL phase   Alexey Charkov
• [PATCH 02/11] lib: Build xxhash in the SPL phase   Tom Rini
• [PATCH 02/11] lib: Build xxhash in the SPL phase   Alexey Charkov
• [PATCH 02/13] video: mediatek: add ovl component   Julien Stephan
• [PATCH 02/14] net: mt7628-eth: check dev_remap_addr_index() for NULL   David Lechner
• [PATCH 02/15] clk: mediatek: merge the of_xlate callbacks   David Lechner
• [PATCH 02/15] clk: mediatek: merge the of_xlate callbacks   Julien Stephan
• [PATCH 02/20] net: preserve the autoload value across dhcp_run   James Hilliard
• [PATCH 03/10] scsi: size a well known unit from the unit it stands in for   Alexey Charkov
• [PATCH 03/11] clk: mediatek: use MTK_GATE_CLK_TREE() for the gate-only clock trees   Julien Stephan
• [PATCH 03/11] cmd: ubi: unbind the block device when detaching UBI   Daniel Golle
• [PATCH 03/11] lib: Let SPL minify zstd on its own   Alexey Charkov
• [PATCH 03/11] lib: Let SPL minify zstd on its own   Tom Rini
• [PATCH 03/13] video: mediatek: add disp rdma component   Julien Stephan
• [PATCH 03/14] net: airoha_eth: check dev_remap_addr_name() for NULL   David Lechner
• [PATCH 03/15] clk: mediatek: merge the enable and disable callbacks   David Lechner
• [PATCH 03/15] clk: mediatek: merge the enable and disable callbacks   Julien Stephan
• [PATCH 03/20] net: lwip: finish DHCP before starting autoload   James Hilliard
• [PATCH 04/10] clk: rockchip: rk3568: Use fixed PMU CRU base address   Massimo Pegorer
• [PATCH 04/10] clk: rockchip: rk3568: Use fixed PMU CRU base address   Jonas Karlman
• [PATCH 04/10] scsi: allow a controller to declare well known logical units   Alexey Charkov
• [PATCH 04/10] scsi: allow a controller to declare well known logical units   Neil Armstrong
• [PATCH 04/10] scsi: allow a controller to declare well known logical units   Alexey Charkov
• [PATCH 04/11] boot: imagemap: free the reservation a replaced record owned   Daniel Golle
• [PATCH 04/11] clk: mediatek: mt8183: merge the clock drivers into a single driver   Julien Stephan
• [PATCH 04/11] clk: mediatek: mt8183: merge the clock drivers into a single driver   David Lechner
• [PATCH 04/11] clk: mediatek: mt8183: merge the clock drivers into a single driver   David Lechner
• [PATCH 04/11] lib: Track whether a phase has a decompressor   Alexey Charkov
• [PATCH 04/11] lib: Track whether a phase has a decompressor   Tom Rini
• [PATCH 04/11] lib: Track whether a phase has a decompressor   Alexey Charkov
• [PATCH 04/11] lib: Track whether a phase has a decompressor   Tom Rini
• [PATCH 04/13] video: mediatek: add color component   Julien Stephan
• [PATCH 04/14] net: hifemac: check dev_remap_addr_name() for NULL   David Lechner
• [PATCH 04/15] clk: mediatek: merge the get_rate callbacks   David Lechner
• [PATCH 04/15] ddr: altera: n5x: Add self-refresh support in DDR4   Chee, Tien Fong
• [PATCH 04/15] ddr: altera: n5x: Add self-refresh support in DDR4   LOK, CHEN HUEI
• [PATCH 04/20] test: net: cover lwIP DHCP autoload handoff   James Hilliard
• [PATCH 05/10] scsi: add a lookup by target and LUN   Alexey Charkov
• [PATCH 05/11] boot: imagemap: do not resize a region the caller owns   Daniel Golle
• [PATCH 05/11] clk: mediatek: mt8188: merge the clock drivers into a single driver   Julien Stephan
• [PATCH 05/11] spl: fit: Decompress any supported algorithm   Alexey Charkov
• [PATCH 05/11] spl: fit: Decompress any supported algorithm   Tom Rini
• [PATCH 05/13] video: mediatek: add ccorr component   Julien Stephan
• [PATCH 05/14] net: hifemac_mdio: check dev_remap_addr() for NULL   David Lechner
• [PATCH 05/15] clk: mediatek: merge the dump callbacks   David Lechner
• [PATCH 05/20] net: lwip: add a hook before accepting DHCP acknowledgements   James Hilliard
• [PATCH 06/10] part: name the well known logical unit device type   Alexey Charkov
• [PATCH 06/11] boot: imagemap: read only the bytes an extend adds   Daniel Golle
• [PATCH 06/11] clk: mediatek: mt8189: merge the clock drivers into a single driver   Julien Stephan
• [PATCH 06/11] clk: mediatek: mt8189: merge the clock drivers into a single driver   David Lechner
• [PATCH 06/11] test: spl: Keep the payload create_fit() is handed   Alexey Charkov
• [PATCH 06/13] video: mediatek: add aal component   Julien Stephan
• [PATCH 06/14] usb: dwc3-octeon-glue: check dev_remap_addr() for NULL   David Lechner
• [PATCH 06/14] usb: dwc3-octeon-glue: check dev_remap_addr() for NULL   Mattijs Korpershoek
• [PATCH 06/15] clk: mediatek: use a single clk_ops for all drivers   David Lechner
• [PATCH 06/20] net: lwip: carry DHCP boot options into the environment   James Hilliard
• [PATCH 07/10] ufs: define the well known logical unit ids   Alexey Charkov
• [PATCH 07/11] boot: fit: unmap the load address after a storage read   Daniel Golle
• [PATCH 07/11] clk: mediatek: mt8195: merge the clock drivers into a single driver   Julien Stephan
• [PATCH 07/11] test: spl: Size the FIT properties for the image name   Alexey Charkov
• [PATCH 07/13] video: mediatek: add gamma component   Julien Stephan
• [PATCH 07/14] usb: dwc3-am62: check dev_remap_addr_index() for NULL   David Lechner
• [PATCH 07/14] usb: dwc3-am62: check dev_remap_addr_index() for NULL   Mattijs Korpershoek
• [PATCH 07/15] clk: mediatek: mt8183: merge the apmixedsys driver into mt8183-clk   David Lechner
• [PATCH 07/20] test: net: exercise lwIP DHCP boot option handling   James Hilliard
• [PATCH 08/10] net: lwip: share one network runtime between clients   Jerome Forissier
• [PATCH 08/10] ufs: report the logical unit the boot W-LU presents   Alexey Charkov
• [PATCH 08/11] boot: fit: keep the load message for RAM-backed images   Daniel Golle
• [PATCH 08/11] clk: mediatek: mt8365: merge the clock drivers into a single driver   Julien Stephan
• [PATCH 08/11] test: spl: Cover FIT image decompression   Alexey Charkov
• [PATCH 08/13] video: mediatek: add dither component   Julien Stephan
• [PATCH 08/14] timer: mchp-pit64b: check dev_read_addr_ptr() for NULL   David Lechner
• [PATCH 08/15] clk: mediatek: mt8188: merge the apmixedsys driver into mt8188-clk   David Lechner
• [PATCH 08/20] net: lwip: export DHCP DNS settings without a resolver   James Hilliard
• [PATCH 09/10] ufs: expose the boot logical unit as a block device   Alexey Charkov
• [PATCH 09/11] boot: bootm: release the imagemap on every failing exit   Daniel Golle
• [PATCH 09/11] clk: mediatek: mt8512: merge the clock drivers into a single driver   Julien Stephan
• [PATCH 09/11] sandbox: spl: Enable zstd   Alexey Charkov
• [PATCH 09/13] video: mediatek: add ddp component   Julien Stephan
• [PATCH 09/14] phy: qcom: snps-femto-v2: check dev_read_addr_ptr() for NULL   David Lechner
• [PATCH 09/15] clk: mediatek: mt8189: merge the remaining drivers into mt8189-clk   David Lechner
• [PATCH 09/20] net: lwip: honor configured DHCP boot-server preferences   James Hilliard
• [PATCH 1/1] cmd/host: allow to retrieve sequence number for label   Tom Rini
• [PATCH 1/1] doc: board/qualcomm: Fix kconfig formatting   Petr Vorel
• [PATCH 1/1] doc: board/qualcomm: Fix kconfig formatting   Balaji Selvanathan
• [PATCH 1/1] doc: board/qualcomm: Fix kconfig formatting   Casey Connolly
• [PATCH 1/1] lib: rsa: reject oversized public exponent in rsa_gen_key_prop()   Tom Rini
• [PATCH 1/2] arch: arm: rockchip: Skip needless CONFIG_TPL_BUILD check   Massimo Pegorer
• [PATCH 1/2] arch: arm: rockchip: Skip needless CONFIG_TPL_BUILD check   Quentin Schulz
• [PATCH 1/2] arch: arm: rockchip: Skip needless CONFIG_TPL_BUILD check   Jonas Karlman
• [PATCH 1/2] arch: arm: rockchip: Skip needless CONFIG_TPL_BUILD check   Massimo Pegorer
• [PATCH 1/2] arm64: dts: rockchip: Add HINLINK H28K   Chukun Pan
• [PATCH 1/2] ARM: dts: Add bootph-all in ltdc node for stm32mp257f-dk-u-boot   Patrice Chotard
• [PATCH 1/2] ARM: dts: Add bootph-all in ltdc node for stm32mp257f-dk-u-boot   Patrick DELAUNAY
• [PATCH 1/2] ARM: dts: Add bootph-all in ltdc node for stm32mp257f-dk-u-boot   Patrice CHOTARD
• [PATCH 1/2] arm: let a defconfig ask for the Linux kernel image header   Aleksei Sviridkin
• [PATCH 1/2] arm: let a defconfig ask for the Linux kernel image header   Tom Rini
• [PATCH 1/2] arm: let a defconfig ask for the Linux kernel image header   Aleksei Sviridkin
• [PATCH 1/2] arm: let a defconfig ask for the Linux kernel image header   Tom Rini
• [PATCH 1/2] arm: let a defconfig ask for the Linux kernel image header   Aleksei Sviridkin
• [PATCH 1/2] arm: let a defconfig ask for the Linux kernel image header   Tom Rini
• [PATCH 1/2] board: amd: versal2: move platform_id/platform_version to .data   Michal Simek
• [PATCH 1/2] board: sophgo: milkv_duo_256m: fix fdtfile quoting   Hiago De Franco
• [PATCH 1/2] board: xilinx: Use strlcat() in board_name_decode()   Sriram Sriram
• [PATCH 1/2] board: xilinx: Use strlcat() in board_name_decode()   Maarten Brock
• [PATCH 1/2] board: xilinx: Use strlcat() in board_name_decode()   Michal Simek
• [PATCH 1/2] board: xilinx: Use strlcat() in board_name_decode()   Michal Simek
• [PATCH 1/2] board: xilinx: Use strlcat() in board_name_decode()   Maarten Brock
• [PATCH 1/2] board: xilinx: Use strlcat() in board_name_decode()   Michal Simek
• [PATCH 1/2] board: xilinx: Use strlcat() in board_name_decode()   Sriram Sriram
• [PATCH 1/2] board: xilinx: Use strlcat() in board_name_decode()   Michal Simek
• [PATCH 1/2] bootstd: rauc: Reject slot names that do not fit the env-var name buffer   Simon Glass
• [PATCH 1/2] clk: mediatek: mt8183: fix infracfg gate lookup   David Lechner
• [PATCH 1/2] clk: mediatek: mt8183: fix infracfg gate lookup   Julien Stephan
• [PATCH 1/2] clk: renesas: Add SDK SCP 4.37 map to Renesas R-Car R8A78000 X5H CPG clock driver   Marek Vasut
• [PATCH 1/2] configs: add config for rock-pi-4b   Jean-Paul Etienne
• [PATCH 1/2] configs: am64x_evm_r5_defconfig: Enable NET_RANDOM_ETHADDR config option   Chintan Vankar
• [PATCH 1/2] doc: board: ti: am64x: add missing debugging section   Bryan Brattlof
• [PATCH 1/2] doc: board: ti: am64x: add missing debugging section   Anshul Dalal
• [PATCH 1/2] efi_loader: fix image info authentication attribute   Vincent Stehlé
• [PATCH 1/2] fdt_support: Add /chosen/bootsource fixup   Quentin Schulz
• [PATCH 1/2] image-fit-sig: also require signatures on the image gate   Eva Crystal
• [PATCH 1/2] image-fit-sig: fail when the control FDT has no /signature node   Eva Crystal
• [PATCH 1/2] imx: add support for i.MX8QX timer   Stefano Manni
• [PATCH 1/2] lib: add memzero_explicit() and use it for the HMAC key schedules   Xiaoyi Suo
• [PATCH 1/2] lib: Let the decompressors use unaligned loads where they are safe   Alexey Charkov
• [PATCH 1/2] mtd: spi-nor-ids: add Winbond W25Q02RV   Jim Liu
• [PATCH 1/2] mtd: spi-nor-ids: add Winbond W25Q02RV   Takahiro.Kuwano at infineon.com
• [PATCH 1/2] net: dwc_eth_qos: bring PHY up before triggering DMA soft reset   kongchen
• [PATCH 1/2] net: dwc_eth_qos: spacemit: add support for K3 SoC   Yixun Lan
• [PATCH 1/2] net: mdio-mux: Don't crash if our parent never shows up   Sean Anderson
• [PATCH 1/2] net: zynq_gem: plug resource leaks in .probe and .remove   Michal Simek
• [PATCH 1/2] net: zynq_gem: plug resource leaks in .probe and .remove   Michal Simek
• [PATCH 1/2] phy: cadence: Add optional auto-probe support   Aksh Garg
• [PATCH 1/2] phy: cadence: Add optional auto-probe support   Aksh Garg
• [PATCH 1/2] pinctrl: mediatek: add pinctrl driver for MT8196   Arnaud Ferraris
• [PATCH 1/2] pinctrl: mediatek: add pinctrl driver for MT8196   David Lechner
• [PATCH 1/2] power: domain: mediatek: support SRAM isolation and inverted power down   David Lechner
• [PATCH 1/2] power: domain: renesas-r8a78000: Add SDK SCP 4.37 map   Marek Vasut
• [PATCH 1/2] rng: airoha: add support for the Airoha TRNG   Vitaliy Sochnev
• [PATCH 1/2] test: spl: Cover FIT image decompression with zstd   Cole Munz
• [PATCH 1/2] tools: mkimage: add SpacemiT K3 AIHD image support   Yixun Lan
• [PATCH 1/2] usb: gadget: f_mass_storage: Remove useless rc variable   Mattijs Korpershoek
• [PATCH 1/2] video: propagate show_splash() return value   Julien Stephan
• [PATCH 1/2] video: propagate show_splash() return value   Julien Stephan
• [PATCH 1/2] video: propagate show_splash() return value   Heinrich Schuchardt
• [PATCH 1/2] video: propagate show_splash() return value   Julien Stephan
• [PATCH 1/3] ARM: dts: phytec: pcm058: Migrate to OF_UPSTREAM   Primoz Fiser
• [PATCH 1/3] arm: mediatek: enable SPL fastboot DAs on Genio 510 and 700   Carlo Caione
• [PATCH 1/3] arm: mediatek: enable SPL fastboot DAs on Genio 510 and 700   David Lechner
• [PATCH 1/3] arm: mediatek: enable SPL fastboot DAs on Genio 510 and 700   Carlo Caione
• [PATCH 1/3] binman: pre-load: Move signing into its own function   Lorenz Kofler
• [PATCH 1/3] binman: pre-load: Move signing into its own function   Simon Glass
• [PATCH 1/3] board: beacon: Remove i.MX8MM Beacon EmbeddedWorks Devkit support   Adam Ford
• [PATCH 1/3] board: beacon: Remove i.MX8MM Beacon EmbeddedWorks Devkit support   Fabio Estevam
• [PATCH 1/3] board: beacon: Remove i.MX8MM Beacon EmbeddedWorks Devkit support   Adam Ford
• [PATCH 1/3] board: beacon: Remove i.MX8MM Beacon EmbeddedWorks Devkit support   Peng Fan (OSS)
• [PATCH 1/3] board: beacon: Remove i.MX8MM Beacon EmbeddedWorks Devkit support   Tom Rini
• [PATCH 1/3] board: microchip: mpfs_generic: drop system controller Kconfig selects   Jamie Gibbons
• [PATCH 1/3] board: sophgo: milkv_duo: add environment for standard boot   Hiago De Franco
• [PATCH 1/3] clk: mediatek: don't truncate the requested PLL rate   David Lechner
• [PATCH 1/3] cmd: optee_rpmb: sanitize TEE_ERROR -> E* translations   Mattijs Korpershoek
• [PATCH 1/3] cmd: optee_rpmb: sanitize TEE_ERROR -> E* translations   Rasmus Villemoes
• [PATCH 1/3] configs: sei510: drop Android support   Guillaume La Roque
• [PATCH 1/3] configs: stm32mp25: Enable CMD_BDINFO_EXTRA flag   Patrice Chotard
• [PATCH 1/3] configs: stm32mp25: Enable CMD_BDINFO_EXTRA flag   Patrick DELAUNAY
• [PATCH 1/3] configs: tqma6: rename TQMA6_SPI_UBOOT_SIZE to TQMA6_SPI_UBOOT_MAX_SIZE   Alexander Feilke
• [PATCH 1/3] ddr: fsl: Fix SPD read when legacy I2C is used   Josef Schlehofer
• [PATCH 1/3] drivers: spmi: add new driver for MediaTek's SPMI PMIF   Arnaud Ferraris
• [PATCH 1/3] drivers: spmi: add new driver for MediaTek's SPMI PMIF   David Lechner
• [PATCH 1/3] fastboot: spi: add 'oem spi-nor-init' command   Vandhiadevan Karunamoorthy
• [PATCH 1/3] mtd: nand: omap_gpmc: report available OOB bytes   Tom Rini
• [PATCH 1/3] pci: pcie-rcar-gen4: Switch to generic firmware loader   neil.armstrong at linaro.org
• [PATCH 1/3] phy: sort vendor subdirectory lists alphabetically   Julien Stephan
• [PATCH 1/3] power: domain: mediatek: support SMI and infra-nao bus protection   Julien Stephan
• [PATCH 1/3] power: domain: mediatek: support SMI and infra-nao bus protection   David Lechner
• [PATCH 1/3] riscv: Fix up the OS memory nodes from the DRAM banks   Junhui Liu
• [PATCH 1/3] riscv: Fix up the OS memory nodes from the DRAM banks   Tom Rini
• [PATCH 1/3] riscv: Fix up the OS memory nodes from the DRAM banks   Junhui Liu
• [PATCH 1/4] arm: dts: am43xx: Add missing board u-boot.dtsi files   Markus Schneider-Pargmann (TI)
• [PATCH 1/4] arm: dts: am43xx: Add missing board u-boot.dtsi files   Tom Rini
• [PATCH 1/4] arm: dts: am43xx: Add missing board u-boot.dtsi files   Markus Schneider-Pargmann
• [PATCH 1/4] arm: dts: am43xx: Add missing board u-boot.dtsi files   Tom Rini
• [PATCH 1/4] arm: imx9: Add ADLINK LEC-iMX95 board support   Dinesh kumar v via B4 Relay
• [PATCH 1/4] board: spacemit: add SpacemiT K3 Pico-ITX   Yixun Lan
• [PATCH 1/4] board: spacemit: add SpacemiT K3 Pico-ITX   Yao Zi
• [PATCH 1/4] board: spacemit: add SpacemiT K3 Pico-ITX   Yixun Lan
• [PATCH 1/4] common: Add command line parsing utilities   Petr Hodina via B4 Relay
• [PATCH 1/4] common: Add command line parsing utilities   Marek Vasut
• [PATCH 1/4] common: Add command line parsing utilities   phodina
• [PATCH 1/4] common: Add command line parsing utilities   Marek Vasut
• [PATCH 1/4] common: Add command line parsing utilities   Tom Rini
• [PATCH 1/4] common: Add command line parsing utilities   Marek Vasut
• [PATCH 1/4] common: Add command line parsing utilities   Tom Rini
• [PATCH 1/4] common: Add command line parsing utilities   phodina
• [PATCH 1/4] common: Add command line parsing utilities   Tom Rini
• [PATCH 1/4] configs: khadas-vim3: drop non-A/B Android defconfigs   Guillaume La Roque
• [PATCH 1/4] crypto: add SHAKE128 and SHAKE256 support   Ayoub Zaki
• [PATCH 1/4] gpio: add a way to parse a GPIO now and request it later   Simon Glass
• [PATCH 1/4] gpio: add a way to parse a GPIO now and request it later   Mehmet Fide
• [PATCH 1/4] imx9: scmi: Move WDOG and GPIO init out of arch_cpu_init   ye.li at oss.nxp.com
• [PATCH 1/4] mach-snapdragon: Carve out reserved memory at init for MSM8917   Reza Kurniawan
• [PATCH 1/4] mach-snapdragon: Carve out reserved memory at init for MSM8917   Balaji Selvanathan
• [PATCH 1/4] mmc: sdhci-cadence6: use const PHY config tables with per-call overrides   Kathpalia, Tanmay
• [PATCH 1/4] mmc: sdhci-cadence6: use const PHY config tables with per-call overrides   NG, TZE YEE
• [PATCH 1/4] mtd: mtdblock: fix lba not being set on MTD block devices   Vandhiadevan Karunamoorthy
• [PATCH 1/4] net: nfs: add bounds checks on memcpy into stack-allocated rpc_pkt   Sriram Sriram
• [PATCH 1/4] nvme: apple: Don't set a DMA direction for commands without a data transfer   Janne Grunau
• [PATCH 1/4] nvme: apple: Don't set a DMA direction for commands without a data transfer   Mark Kettenis
• [PATCH 1/5] doc: splash: convert README.splashprepare to reStructuredText   David Lechner
• [PATCH 1/5] efi_loader: adjust EBBR 2.1 ECPT entry   Vincent Stehlé
• [PATCH 1/5] efi_loader: adjust EBBR 2.1 ECPT entry   Ilias Apalodimas
• [PATCH 1/5] efi_loader: adjust EBBR 2.1 ECPT entry   Vincent Stehlé
• [PATCH 1/5] efi_loader: adjust EBBR 2.1 ECPT entry   Ilias Apalodimas
• [PATCH 1/5] spi: spi-mem: add spi-mem caps support   Mikhail Kshevetskiy
• [PATCH 1/6] power: domain: mtk: simplify Kconfig   David Lechner
• [PATCH 1/6] power: domain: mtk: simplify Kconfig   Julien Stephan
• [PATCH 1/6] power: firmware: zynqmp: add shared request_node() helper   Akshay Belsare
• [PATCH 1/7] clk: qcom: qcs8300: add SDCC1 clocks   Tyler Baker
• [PATCH 1/7] lib: ecdsa: read private keys from '<name>.key' like RSA   Ayoub Zaki
• [PATCH 1/7] phy: ti: phy-ti-am654: fix logic for programming clock parent   Siddharth Vadapalli
• [PATCH 1/8] core: skip parent device nodes without a DT reference when looking for dma-ranges   Torsten Duwe
• [PATCH 1/8] core: skip parent device nodes without a DT reference when looking for dma-ranges   Simon Glass
• [PATCH 1/8] mmc: arm_pl180: Configure Ux500 signal direction   Linus Walleij
• [PATCH 1/9] mtd: bind an mtd_blk device for non-NAND MTD masters   Simon Glass
• [PATCH 10/10] spl: ufs: allow loading U-Boot from the boot logical unit   Alexey Charkov
• [PATCH 10/11] binman: Allow choosing the compression level   Alexey Charkov
• [PATCH 10/11] clk: mediatek: mt8516: merge the clock drivers into a single driver   Julien Stephan
• [PATCH 10/11] test: boot: imagemap: detach UBI when the test is done   Daniel Golle
• [PATCH 10/13] video: mediatek: mtk_disp_mutex: add the DSI pipeline   Julien Stephan
• [PATCH 10/14] phy: rockchip: inno-dsidphy: check dev_read_addr_ptr() for NULL   David Lechner
• [PATCH 10/14] phy: rockchip: inno-dsidphy: check dev_read_addr_ptr() for NULL   Quentin Schulz
• [PATCH 10/15] clk: mediatek: mt8195: merge the apmixedsys driver into mt8195-clk   David Lechner
• [PATCH 10/20] net: lwip: support PXE client and configuration options   James Hilliard
• [PATCH 11/11] clk: mediatek: mt8518: merge the clock drivers into a single driver   Julien Stephan
• [PATCH 11/11] rockchip: Choose FIT payload compression via Kconfig   Alexey Charkov
• [PATCH 11/11] test: boot: imagemap: reset driver-model state between tests   Daniel Golle
• [PATCH 11/13] video: mediatek: add dsi driver   Julien Stephan
• [PATCH 11/14] pinctrl: aspeed: ast2600: check dev_read_addr_ptr() for NULL   David Lechner
• [PATCH 11/15] clk: mediatek: mt8365: merge the apmixedsys driver into mt8365-clk   David Lechner
• [PATCH 11/20] net: cache accepted DHCP acknowledgements for EFI PXE consumers   James Hilliard
• [PATCH 12/13] configs: mediatek: mt8365_evk: enable dsi pipeline   Julien Stephan
• [PATCH 12/14] reset: ast2500: check dev_read_addr_ptr() for NULL   David Lechner
• [PATCH 12/15] clk: mediatek: mt8366: merge the apmixedsys driver into mt8366-clk   David Lechner
• [PATCH 12/20] net: lwip: honor DHCP timing controls and request header fields   James Hilliard
• [PATCH 13/13] configs: mediatek: mt8366_genio_360_evk: enable dsi pipeline   Julien Stephan
• [PATCH 13/14] reset: ast2600: check dev_read_addr_ptr() for NULL   David Lechner
• [PATCH 13/15] clk: mediatek: mt8512: merge the apmixedsys driver into mt8512-clk   David Lechner
• [PATCH 13/20] net: lwip: add a hook before parsing DHCP replies   James Hilliard
• [PATCH 14/14] arm: aspeed: ast2600: check devfdt_get_addr_ptr() for NULL   David Lechner
• [PATCH 14/15] clk: mediatek: mt8516: merge the apmixedsys driver into mt8516-clk   David Lechner
• [PATCH 14/15] ddr: altera: n5x: reconfigure DDR when mem-clk handoff changes   Chee, Tien Fong
• [PATCH 14/15] ddr: altera: n5x: reconfigure DDR when mem-clk handoff changes   LOK, CHEN HUEI
• [PATCH 14/20] net: lwip: accept direct ProxyDHCP replies without a lease   James Hilliard
• [PATCH 15/15] clk: mediatek: mt8518: merge the apmixedsys driver into mt8518-clk   David Lechner
• [PATCH 15/20] net: lwip: retain boot metadata from the selected DHCP offer   James Hilliard
• [PATCH 16/20] net: lwip: retry DHCP acquisition using the network failure policy   James Hilliard
• [PATCH 17/20] test: net: exercise lwIP ProxyDHCP ordering and validation   James Hilliard
• [PATCH 18/20] net: lwip: separate DHCP exchange from boot configuration   James Hilliard
• [PATCH 19/20] net: lwip: support standalone BOOTP   James Hilliard
• [PATCH 2/2] ARM: dts: Add bootph-all in ltdc node for sqtm32mp235f-dk-u-boot   Patrice Chotard
• [PATCH 2/2] ARM: dts: Add bootph-all in ltdc node for sqtm32mp235f-dk-u-boot   Patrick DELAUNAY
• [PATCH 2/2] ARM: dts: Add bootph-all in ltdc node for sqtm32mp235f-dk-u-boot   Patrice CHOTARD
• [PATCH 2/2] arm: mediatek: default the kernel image header text offset base   Aleksei Sviridkin
• [PATCH 2/2] board: rockchip: add HINLINK H28K   Chukun Pan
• [PATCH 2/2] board: rockchip: add HINLINK H28K   Jonas Karlman
• [PATCH 2/2] board: rockchip: add HINLINK H28K   Chukun Pan
• [PATCH 2/2] board: st: Fix compilation issue   Patrick DELAUNAY
• [PATCH 2/2] board: st: Fix compilation issue   Patrice CHOTARD
• [PATCH 2/2] board: xilinx: Make ft_board_setup() weak   Sriram Sriram
• [PATCH 2/2] board: xilinx: versal-net: move platform_id/platform_version to .data   Michal Simek
• [PATCH 2/2] Clean up emails from non-existing domains   Tom Rini
• [PATCH 2/2] Clean up emails from non-existing domains   Michal Simek
• [PATCH 2/2] clk: mediatek: mt8518: fix top gate lookup   David Lechner
• [PATCH 2/2] clk: renesas: Add SDK SCP 4.39 map to Renesas R-Car R8A78000 X5H CPG clock driver   Marek Vasut
• [PATCH 2/2] configs: am64x_evm_a53_defconfig: Enable NET_RANDOM_ETHADDR config option   Chintan Vankar
• [PATCH 2/2] configs: an7581_evb: enable the Airoha TRNG   Vitaliy Sochnev
• [PATCH 2/2] configs: j7200_evm_a72_defconfig: Enable config to auto-probe the PHY   Aksh Garg
• [PATCH 2/2] configs: j7200_evm_a72_defconfig: Enable config to auto-probe the PHY   Aksh Garg
• [PATCH 2/2] configs: spacemit: k3: Enable Ethernet support   Yixun Lan
• [PATCH 2/2] configs: spacemit: k3: Enable Ethernet support   E Shattow
• [PATCH 2/2] configs: spacemit: k3: Enable Ethernet support   Yixun Lan
• [PATCH 2/2] doc: board: ti: correct path to tcl scripts   Bryan Brattlof
• [PATCH 2/2] doc: board: ti: correct path to tcl scripts   Anshul Dalal
• [PATCH 2/2] drivers: Skip needless CONFIG_TPL_BUILD check   Massimo Pegorer
• [PATCH 2/2] drivers: Skip needless CONFIG_TPL_BUILD check   Quentin Schulz
• [PATCH 2/2] dts: rk3399-rock-pi-4b: account for SDRAM LPDDR4 params   Jean-Paul Etienne
• [PATCH 2/2] efi_selftest: add minimal fmp test   Vincent Stehlé
• [PATCH 2/2] lib: use memzero_explicit() for the SM3 message schedule   Xiaoyi Suo
• [PATCH 2/2] Makefile: drop GNU Make < 4.0 compatibility code   Hanumant Kakade, Suraj
• [PATCH 2/2] Makefile: drop GNU Make < 4.0 compatibility code   Ilias Apalodimas
• [PATCH 2/2] Makefile: drop GNU Make < 4.0 compatibility code   Hanumant Kakade, Suraj
• [PATCH 2/2] mtd: spi-nor-ids: add GigaDevice GD25LB512MF   Jim Liu
• [PATCH 2/2] mtd: spi-nor-ids: add GigaDevice GD25LB512MF   Takahiro.Kuwano at infineon.com
• [PATCH 2/2] net: eth-phy: release the reset GPIO on device removal   Michal Simek
• [PATCH 2/2] net: mdio-mux: Remove ourselves when our parent is removed   Sean Anderson
• [PATCH 2/2] net: mdio-mux: Remove ourselves when our parent is removed   Sean Anderson
• [PATCH 2/2] net: phy: add support for Maxio MAE0621A Ethernet PHYs   kongchen
• [PATCH 2/2] pinctrl: mediatek: further increase max number of base addresses   Arnaud Ferraris
• [PATCH 2/2] pinctrl: mediatek: further increase max number of base addresses   David Lechner
• [PATCH 2/2] pinctrl: spacemit: k3: add K3 pin support   Yixun Lan
• [PATCH 2/2] power: domain: mt8189: model the SRAM handling of two domains   David Lechner
• [PATCH 2/2] power: domain: renesas-r8a78000: Add SDK SCP 4.39 map   Marek Vasut
• [PATCH 2/2] riscv: cpu: cv1800b: keep U-Boot out of reserved memory   Hiago De Franco
• [PATCH 2/2] rockchip: Declare unaligned access safe in the ARM64 SPL   Alexey Charkov
• [PATCH 2/2] test: boot: Check that rauc rejects over-long slot names   Simon Glass
• [PATCH 2/2] test: boot: Check that rauc rejects over-long slot names   Aristo Chen
• [PATCH 2/2] test: boot: Check that rauc rejects over-long slot names   Simon Glass
• [PATCH 2/2] test: spl: Cover FIT image decompression with gzip   Cole Munz
• [PATCH 2/2] test: vboot: add coverage for a control FDT with no /signature node   Eva Crystal
• [PATCH 2/2] test: vboot: add coverage for a control FDT with no /signature node   Eva Crystal
• [PATCH 2/2] usb: gadget: f_mass_storage: Optimize schedule() call   Mattijs Korpershoek
• [PATCH 2/2] usb: gadget: f_mass_storage: Optimize schedule() call   Patrice CHOTARD
• [PATCH 2/2] usb: gadget: f_mass_storage: Optimize schedule() call   Patrice CHOTARD
• [PATCH 2/2] usb: gadget: f_mass_storage: Optimize schedule() call   Patrice CHOTARD
• [PATCH 2/2] video: fix build with CONFIG_VIDEO && !CONFIG_VIDEO_LOGO   Julien Stephan
• [PATCH 2/2] video: fix build with CONFIG_VIDEO && !CONFIG_VIDEO_LOGO   Julien Stephan
• [PATCH 2/2] video: fix build with CONFIG_VIDEO && !CONFIG_VIDEO_LOGO   Tom Rini
• [PATCH 2/2] video: fix build with CONFIG_VIDEO && !CONFIG_VIDEO_LOGO   Julien Stephan
• [PATCH 2/2] video: fix build with CONFIG_VIDEO && !CONFIG_VIDEO_LOGO   Tom Rini
• [PATCH 2/2] video: fix build with CONFIG_VIDEO && !CONFIG_VIDEO_LOGO   Simon Glass
• [PATCH 2/2] video: fix build with CONFIG_VIDEO && !CONFIG_VIDEO_LOGO   Tom Rini
• [PATCH 2/2] video: fix build with CONFIG_VIDEO && !CONFIG_VIDEO_LOGO   Simon Glass
• [PATCH 2/2] wdog: add i.MX system controller watchdog support   Stefano Manni
• [PATCH 2/3] arm: mediatek: enable U-Boot fastboot DAs on Genio 510 and 700   Carlo Caione
• [PATCH 2/3] arm: mediatek: enable U-Boot fastboot DAs on Genio 510 and 700   David Lechner
• [PATCH 2/3] arm: mediatek: enable U-Boot fastboot DAs on Genio 510 and 700   Carlo Caione
• [PATCH 2/3] arm: mediatek: enable U-Boot fastboot DAs on Genio 510 and 700   David Lechner
• [PATCH 2/3] arm: mediatek: enable U-Boot fastboot DAs on Genio 510 and 700   Carlo Caione
• [PATCH 2/3] binman: pre-load: Allow signing with an OpenSSL engine   Lorenz Kofler
• [PATCH 2/3] binman: pre-load: Allow signing with an OpenSSL engine   Simon Glass
• [PATCH 2/3] board: beacon: Remove i.MX8MN Beacon EmbeddedWorks Devkit support   Adam Ford
• [PATCH 2/3] board: beagle: beaglev_fire: drop system controller Kconfig selects   Jamie Gibbons
• [PATCH 2/3] clk: mediatek: return the new rate from PLL set_rate   David Lechner
• [PATCH 2/3] cmd: optee_rpmb: try to allocate large enough buffer when reading persistent value   Mattijs Korpershoek
• [PATCH 2/3] configs: milkv_duo: enable BOOTSTD_DEFAULTS   Hiago De Franco
• [PATCH 2/3] configs: pcm058_defconfig: Enable Winbond SPI NOR flash support   Primoz Fiser
• [PATCH 2/3] configs: sei610: drop Android support   Guillaume La Roque
• [PATCH 2/3] configs: stm32mp21: Enable CMD_BDINFO_EXTRA flag   Patrice Chotard
• [PATCH 2/3] configs: stm32mp21: Enable CMD_BDINFO_EXTRA flag   Patrick DELAUNAY
• [PATCH 2/3] configs: tqma6ul: rename TQMA6UL_SPI_UBOOT_SIZE to TQMA6UL_SPI_UBOOT_MAX_SIZE   Alexander Feilke
• [PATCH 2/3] drivers: power: pmic: add driver for MediaTek PMICs over SPMI   Arnaud Ferraris
• [PATCH 2/3] drivers: power: pmic: add driver for MediaTek PMICs over SPMI   David Lechner
• [PATCH 2/3] misc: qcom_geni: implement fastboot_oem_spi_nor_reinit()   Vandhiadevan Karunamoorthy
• [PATCH 2/3] misc: qcom_geni: implement fastboot_oem_spi_nor_reinit()   Casey Connolly
• [PATCH 2/3] pci: pcie-rcar-gen4: Avoid repeated link attempts   neil.armstrong at linaro.org
• [PATCH 2/3] pci: pcie-rcar-gen4: Avoid repeated link attempts   Marek Vasut
• [PATCH 2/3] pci: spacemit: add DesignWare PCIe host controller driver   Neil Armstrong
• [PATCH 2/3] phy: mediatek: move MediaTek PHY drivers to their own subdirectory   Julien Stephan
• [PATCH 2/3] phy: mediatek: move MediaTek PHY drivers to their own subdirectory   David Lechner
• [PATCH 2/3] power: domain: mtk: add MT8365 power domain   Julien Stephan
• [PATCH 2/3] power: domain: mtk: add MT8365 power domain   David Lechner
• [PATCH 2/3] powerpc: mpc85xx: Move alignment padding into __u_boot_list section   Josef Schlehofer
• [PATCH 2/3] riscv: spacemit: k1: Use the common memory FDT fixup   Junhui Liu
• [PATCH 2/3] tools: qcom: mkmbn: Add support for ipq5210   Varadarajan Narayanan
• [PATCH 2/4] arm: dts: am4372-u-boot.dtsi: Add tick-timer   Markus Schneider-Pargmann (TI)
• [PATCH 2/4] arm: dts: imx95: Add ADLINK LEC-iMX95 device tree   Dinesh kumar v via B4 Relay
• [PATCH 2/4] arm: dts: imx95: Add ADLINK LEC-iMX95 device tree   Fabio Estevam
• [PATCH 2/4] boot: image-fit: add overflow guard for FIT decompression buffer   Sriram Sriram
• [PATCH 2/4] boot: image-fit: add overflow guard for FIT decompression buffer   Tom Rini
• [PATCH 2/4] boot: image-fit: add overflow guard for FIT decompression buffer   Sriram Sriram
• [PATCH 2/4] boot: image-fit: add overflow guard for FIT decompression buffer   Tom Rini
• [PATCH 2/4] common: Add command line parameter masking functionality   Petr Hodina via B4 Relay
• [PATCH 2/4] configs: khadas-vim3: enlarge the fastboot buffer   Guillaume La Roque
• [PATCH 2/4] crypto: add FIPS 204 ML-DSA verification   Ayoub Zaki
• [PATCH 2/4] imx9: scmi: Support early caches enable in SPL and u-boot   ye.li at oss.nxp.com
• [PATCH 2/4] mmc: sdhci-cadence6: name PHY and controller config table slots   Kathpalia, Tanmay
• [PATCH 2/4] mmc: sdhci-cadence6: name PHY and controller config table slots   NG, TZE YEE
• [PATCH 2/4] mtd: spi: sf_probe: bind SPI-NOR into MTD block subsystem   Vandhiadevan Karunamoorthy
• [PATCH 2/4] nvme: apple: Never set the opcode in the NVMMU TCB   Janne Grunau
• [PATCH 2/4] nvme: apple: Never set the opcode in the NVMMU TCB   Mark Kettenis
• [PATCH 2/4] pci: pcie-rcar-gen4: Handle always on reference clock   Neil Armstrong
• [PATCH 2/4] pinctrl: qcom: Add pinctrl driver for MSM8917   Reza Kurniawan
• [PATCH 2/4] pinctrl: qcom: Add pinctrl driver for MSM8917   Balaji Selvanathan
• [PATCH 2/4] regulator: claim the enable GPIO at probe time, not in of_to_plat()   Simon Glass
• [PATCH 2/4] regulator: claim the enable GPIO at probe time, not in of_to_plat()   Mehmet Fide
• [PATCH 2/4] riscv: dts: spacemit: k3: add binman node   Yixun Lan
• [PATCH 2/5] doc: splash: document the features added since 2013   David Lechner
• [PATCH 2/5] efi_loader: add EBBR 2.2-2.4 ECPT entries   Vincent Stehlé
• [PATCH 2/5] efi_loader: add EBBR 2.2-2.4 ECPT entries   Ilias Apalodimas
• [PATCH 2/5] spi: spi-mem: Transform the read operation template   Mikhail Kshevetskiy
• [PATCH 2/6] configs: mediatek: drop no longer needed POWER_DOMAIN options   David Lechner
• [PATCH 2/6] rockchip: rk3506: Update ENV_MEM_LAYOUT_SETTINGS   Quentin Schulz
• [PATCH 2/6] spi: cadence_qspi: Abstract PM node requests behind firmware helper   Akshay Belsare
• [PATCH 2/7] clk: qcom: qcs8300: add QUPv3 clocks   Tyler Baker
• [PATCH 2/7] clk: qcom: qcs8300: add QUPv3 clocks   Casey Connolly
• [PATCH 2/7] clk: qcom: qcs8300: add QUPv3 clocks   Tyler Baker
• [PATCH 2/7] mbedtls: factor out shared bignum and ASN.1 objects   Ayoub Zaki
• [PATCH 2/7] pci: pcie_dw_ti: fetch num-lanes from the device-tree and use it   Siddharth Vadapalli
• [PATCH 2/8] mmc: arm_pl180: Gate idle card clocks   Linus Walleij
• [PATCH 2/8] test: add dma-ranges UT for dynamically created nodes   Torsten Duwe
• [PATCH 2/8] test: add dma-ranges UT for dynamically created nodes   Simon Glass
• [PATCH 2/9] mtd: nand: sandbox: forbid sub-page writes   Simon Glass
• [PATCH 20/20] test: net: exercise lwIP standalone BOOTP   James Hilliard
• [PATCH 3/3] avb_verify: read_persistent_value: honour contract regarding too small buffer   Mattijs Korpershoek
• [PATCH 3/3] binman: pre-load: Test signing with an OpenSSL engine   Lorenz Kofler
• [PATCH 3/3] binman: pre-load: Test signing with an OpenSSL engine   Simon Glass
• [PATCH 3/3] board: beacon: Remove i.MX8MP Beacon EmbeddedWorks Devkit support   Adam Ford
• [PATCH 3/3] board: cssi: Move alignment padding into __u_boot_list section   Josef Schlehofer
• [PATCH 3/3] clk: mediatek: select mux inputs by rate   David Lechner
• [PATCH 3/3] clk: mediatek: select mux inputs by rate   Julien Stephan
• [PATCH 3/3] configs: milkv_duo: reduce CONFIG_STACK_SIZE to 1MB   Hiago De Franco
• [PATCH 3/3] configs: mt8365: enable the power domain driver   Julien Stephan
• [PATCH 3/3] configs: pcm058_defconfig: Enable i.MX on-chip thermal sensor   Primoz Fiser
• [PATCH 3/3] configs: remove unused meson64_android.h   Guillaume La Roque
• [PATCH 3/3] configs: stm32mp23: Sync config with STM32MP25 one   Patrice Chotard
• [PATCH 3/3] configs: stm32mp23: Sync config with STM32MP25 one   Patrick DELAUNAY
• [PATCH 3/3] configs: tqma7: rename TQMA7_SPI_UBOOT_SIZE to TQMA7_SPI_UBOOT_MAX_SIZE   Alexander Feilke
• [PATCH 3/3] doc: board: mediatek: document Genio download agents   Carlo Caione
• [PATCH 3/3] drivers: power: regulator: add driver for the regulators of MT6373   Arnaud Ferraris
• [PATCH 3/3] drivers: power: regulator: add driver for the regulators of MT6373   David Lechner
• [PATCH 3/3] dts: spacemit: add PCIe nodes and enable in defconfig   Yixun Lan
• [PATCH 3/3] misc: qcom_geni: fix NULL pointer dereference in qcom_geni_load_firmware()   Vandhiadevan Karunamoorthy
• [PATCH 3/3] pci: pcie-rcar-gen4: Switch to devm_*() GPIO and reset   neil.armstrong at linaro.org
• [PATCH 3/3] phy: phy-mtk-mipi-dsi: add new driver   Julien Stephan
• [PATCH 3/3] phy: phy-mtk-mipi-dsi: add new driver   David Lechner
• [PATCH 3/3] phy: phy-mtk-mipi-dsi: add new driver   Julien Stephan
• [PATCH 3/3] pinctrl: pinctrl_stm32: support IO synchronization parameters   Mateusz Nowicki
• [PATCH 3/3] pinctrl: pinctrl_stm32: support IO synchronization parameters   Patrice CHOTARD
• [PATCH 3/3] riscv: mpfs: move system controller config to CPU Kconfig   Jamie Gibbons
• [PATCH 3/3] riscv: starfive: visionfive2: Use the common memory FDT fixup   Junhui Liu
• [PATCH 3/4] blk: uclass: dispatch UCLASS_MTD lookups by block descriptor   Vandhiadevan Karunamoorthy
• [PATCH 3/4] clk: qcom: Add an option to poll for GDSCR GDSC_POWER_ON bit   Reza Kurniawan
• [PATCH 3/4] clk: qcom: Add an option to poll for GDSCR GDSC_POWER_ON bit   Balaji Selvanathan
• [PATCH 3/4] common: Add Android bootloader parameter parsing helper   Petr Hodina via B4 Relay
• [PATCH 3/4] configs: Add ADLINK LEC-iMX95 defconfig   Dinesh kumar v via B4 Relay
• [PATCH 3/4] configs: am43xx: Switch to upstream devicetree   Markus Schneider-Pargmann (TI)
• [PATCH 3/4] configs: khadas-vim3: update the Android partition layout   Guillaume La Roque
• [PATCH 3/4] configs: spacemit: Add K3 default configuration   Yixun Lan
• [PATCH 3/4] doc: driver-model: state that of_to_plat() must not probe or claim   Simon Glass
• [PATCH 3/4] doc: driver-model: state that of_to_plat() must not probe or claim   Mehmet Fide
• [PATCH 3/4] mmc: sdhci-cadence6: configure PHY control register per speed mode   Kathpalia, Tanmay
• [PATCH 3/4] mmc: sdhci-cadence6: configure PHY control register per speed mode   NG, TZE YEE
• [PATCH 3/4] net: tftp: use bounded string compare for OACK   Sriram Sriram
• [PATCH 3/4] net: tftp: use bounded string compare for OACK   Tom Rini
• [PATCH 3/4] net: tftp: use bounded string compare for OACK option parsing   Sriram Sriram
• [PATCH 3/4] net: tftp: use bounded string compare for OACK option parsing   Tom Rini
• [PATCH 3/4] nvme: apple: Add WARN_ON_ONCE for non page-aligned admin queue buffers   Janne Grunau
• [PATCH 3/4] nvme: apple: Add WARN_ON_ONCE for non page-aligned admin queue buffers   Mark Kettenis
• [PATCH 3/4] spl_imx_container: Fix verify image after SPL dcache enabled   ye.li at oss.nxp.com
• [PATCH 3/4] test: add ML-DSA verification tests   Ayoub Zaki
• [PATCH 3/5] lib: uuid: add EBBR 2.2-2.4 conformance profile GUIDs   Vincent Stehlé
• [PATCH 3/5] spi: spi-mem: Create a secondary read operation   Mikhail Kshevetskiy
• [PATCH 3/5] splash: use u32 for the raw storage offset   David Lechner
• [PATCH 3/6] power: domain: mtk: support two-phase bus protection   David Lechner
• [PATCH 3/6] spi: cadence_ospi_versal: decouple OSPI mux selection from firmware calls   Akshay Belsare
• [PATCH 3/7] mbedtls: add ECDSA library module   Ayoub Zaki
• [PATCH 3/7] pci: pcie_dw_ti: fetch reset-gpios from the device-tree and use it   Siddharth Vadapalli
• [PATCH 3/7] pci: pcie_dw_ti: fetch reset-gpios from the device-tree and use it   Siddharth Vadapalli
• [PATCH 3/7] pinctrl: qcom: add QCS8300 TLMM driver   Tyler Baker
• [PATCH 3/8] bios_emulator: use driver-model functions for PCI config acceses   Neil Armstrong
• [PATCH 3/8] configs: enable NVMe on RPi4 and RPi5   Torsten Duwe
• [PATCH 3/8] configs: enable NVMe on RPi4 and RPi5   Simon Glass
• [PATCH 3/8] power: regulator: Add driver voltage clamp callback   Linus Walleij
• [PATCH 3/9] cmd: ubi: create a ubi_blk device when attaching UBI   Simon Glass
• [PATCH 36/36] ufs: qcom: fix core clk max rate setting   Neil Armstrong
• [PATCH 4/4] arm: carry previous bootloader's bootargs into $bootargs   Petr Hodina via B4 Relay
• [PATCH 4/4] arm: dts: am43xx: Remove local devicetrees for migrated boards   Markus Schneider-Pargmann (TI)
• [PATCH 4/4] clk: qcom: Add Global Clock Controller (GCC) driver for MSM8917   Reza Kurniawan
• [PATCH 4/4] clk: qcom: Add Global Clock Controller (GCC) driver for MSM8917   Balaji Selvanathan
• [PATCH 4/4] configs: khadas-vim3: fix the Android DTB index   Guillaume La Roque
• [PATCH 4/4] disk: part_efi: force partition re-detection after GPT write   Vandhiadevan Karunamoorthy
• [PATCH 4/4] doc: board: Add ADLINK LEC-iMX95 documentation   Dinesh kumar v via B4 Relay
• [PATCH 4/4] doc: describe ML-DSA verification   Ayoub Zaki
• [PATCH 4/4] doc: describe ML-DSA verification   Heinrich Schuchardt
• [PATCH 4/4] doc: describe ML-DSA verification   Ayoub Zaki
• [PATCH 4/4] doc: spacemit: k3: Add Pico-ITX board   Yixun Lan
• [PATCH 4/4] fs: ext4: widen ext4fs_update() block-group loop counter   Sriram Sriram
• [PATCH 4/4] nvme: apple: Drop the PRP null check chicken bit   Janne Grunau
• [PATCH 4/4] nvme: apple: Drop the PRP null check chicken bit   Mark Kettenis
• [PATCH 4/4] nxp: imx9{5,4,52} evk/frdm : Enable caches in SPL   ye.li at oss.nxp.com
• [PATCH 4/4] test: dm: check the fixed regulator claims its GPIO at probe time   Simon Glass
• [PATCH 4/4] test: dm: check the fixed regulator claims its GPIO at probe time   Mehmet Fide
• [PATCH 4/5] spi: spi-mem: sync code and behavior with linux   Mikhail Kshevetskiy
• [PATCH 4/5] splash: add a splashoffset environment variable   David Lechner
• [PATCH 4/5] test/py: add 2.2-2.4 ECPT tests   Vincent Stehlé
• [PATCH 4/5] test/py: add 2.2-2.4 ECPT tests   Ilias Apalodimas
• [PATCH 4/6] power: domain: mtk: add MT8189 power domain   David Lechner
• [PATCH 4/6] spi: cadence_qspi: propagate mux-select failure instead of only logging it   Akshay Belsare
• [PATCH 4/7] board: qualcomm: tfa-optee: enable the OP-TEE library   Tyler Baker
• [PATCH 4/7] board: ti: am65x: evm: add support for SPL to update U-Boot device-tree   Siddharth Vadapalli
• [PATCH 4/7] lib: ecdsa: add software ECDSA verification using MbedTLS   Ayoub Zaki
• [PATCH 4/8] clk: add support for RPi5 RP1 chip clk   Torsten Duwe
• [PATCH 4/8] clk: add support for RPi5 RP1 chip clk   Simon Glass
• [PATCH 4/8] clk: add support for RPi5 RP1 chip clk   Anders Roxell
• [PATCH 4/8] mmc: arm_pl180: Set initial supply voltages   Linus Walleij
• [PATCH 4/9] mtd: nand: spi: drop the eager ubi_blk binding   Simon Glass
• [PATCH 5/5] doc: uefi: EBBR conformance profiles   Vincent Stehlé
• [PATCH 5/5] doc: uefi: EBBR conformance profiles   Ilias Apalodimas
• [PATCH 5/5] mtd: nand: spi: sync spinand code with linux-7.3   Mikhail Kshevetskiy
• [PATCH 5/5] splash: add SCSI storage support   David Lechner
• [PATCH 5/6] arm: dts: mediatek: mt8189: add the power controller   David Lechner
• [PATCH 5/6] arm: dts: mediatek: mt8189: add the power controller   Julien Stephan
• [PATCH 5/6] arm: dts: mediatek: mt8189: add the power controller   David Lechner
• [PATCH 5/6] clk: rockchip: rk3506: Use FIELD_PREP_WM16 macro   Quentin Schulz
• [PATCH 5/6] firmware: zynqmp: add OSPI flash reset IOCTL wrapper   Akshay Belsare
• [PATCH 5/7] arm: dts: k3-am65x-binman: package overlay for PCI-USB2 daughtercard   Siddharth Vadapalli
• [PATCH 5/7] mach-snapdragon: add a boot0 hook to run U-Boot on a selected CPU   Tyler Baker
• [PATCH 5/7] test: vboot: add ECDSA verified boot tests   Ayoub Zaki
• [PATCH 5/8] gpio: add support for RPi5 RP1 chip GPIO   Torsten Duwe
• [PATCH 5/8] gpio: add support for RPi5 RP1 chip GPIO   Simon Glass
• [PATCH 5/8] mmc: arm_pl180: Power down card supplies at OS handoff   Linus Walleij
• [PATCH 5/9] boot: add imagemap on-demand loading from storage   Simon Glass
• [PATCH 6/6] configs: mt8189: enable the power domain driver   David Lechner
• [PATCH 6/6] spi: cadence_ospi_versal: route OSPI flash reset through firmware   Akshay Belsare
• [PATCH 6/7] arm: dts: k3-am654: add bootph-all to gpio at 38 for daughtercard detection   Siddharth Vadapalli
• [PATCH 6/7] board: qualcomm: add Arduino VENTUNO Q config fragment   Tyler Baker
• [PATCH 6/7] doc: fit: document ECDSA key creation and verification   Ayoub Zaki
• [PATCH 6/8] clk: spacemit: k3: reduce clock tree for SPL build   Tim Ouyang
• [PATCH 6/8] clk: spacemit: k3: reduce clock tree for SPL build   Yixun Lan
• [PATCH 6/8] mfd: add support for RPi5 RP1 chip MFD   Torsten Duwe
• [PATCH 6/8] mfd: add support for RPi5 RP1 chip MFD   Simon Glass
• [PATCH 6/8] mfd: add support for RPi5 RP1 chip MFD   Anders Roxell
• [PATCH 6/8] mmc: arm_pl180: Read FIFO in bursts   Linus Walleij
• [PATCH 6/9] boot: fit: support on-demand loading in fit_image_load()   Simon Glass
• [PATCH 7/7] configs: am65x_evm_a53_defconfig: enable support for PCI-USB2 daughtercard   Siddharth Vadapalli
• [PATCH 7/7] doc: board: qualcomm: document the Arduino VENTUNO Q   Tyler Baker
• [PATCH 7/7] MAINTAINERS: add an entry for lib/ecdsa   Ayoub Zaki
• [PATCH 7/8] board: raspberrypi: use board_late_init to probe RP1 chip   Torsten Duwe
• [PATCH 7/8] board: raspberrypi: use board_late_init to probe RP1 chip   Simon Glass
• [PATCH 7/8] mmc: arm_pl180: Use bulk FIFO accessors   Linus Walleij
• [PATCH 7/9] configs: sandbox: enable imagemap and its storage backends   Simon Glass
• [PATCH 8/8] configs: enable DWC3 on RPi5   Torsten Duwe
• [PATCH 8/8] configs: enable DWC3 on RPi5   Simon Glass
• [PATCH 8/8] mmc: arm_pl180: Use variant FIFO sizes   Linus Walleij
• [PATCH 8/9] test: boot: add imagemap unit tests   Simon Glass
• [PATCH 9/9] doc: imagemap: document on-demand loading framework   Simon Glass
• [PATCH] arch/riscv: Allow booting from NET   Nikita Shubin
• [PATCH] arch/riscv: Allow booting from NET   Nikita Shubin
• [PATCH] arm64: dts: imx: Fix EEPROM address on Data Modul i.MX8M Plus eDM SBC   Marek Vasut
• [PATCH] arm64: dts: imx: Fix EEPROM address on Data Modul i.MX8M Plus eDM SBC   Fabio Estevam
• [PATCH] arm64: dts: imx: Fix EEPROM address on Data Modul i.MX8M Plus eDM SBC   Marek Vasut
• [PATCH] arm64: dts: imx: Increase malloc area size on Data Modul i.MX8M eDM SBC   Marek Vasut
• [PATCH] arm64: dts: imx: Switch Data Modul i.MX8M eDM SBC to OF_UPSTREAM   Marek Vasut
• [PATCH] arm64: dts: renesas: ironhide: Align inline ECC carveout sizes with bootloader settings   Marek Vasut
• [PATCH] arm64: renesas: Drop CNTP from Renesas R-Car Gen5 common code   Marek Vasut
• [PATCH] arm64: renesas: Drop empty board_early_init_f() from Renesas R-Car Gen5 common code   Marek Vasut
• [PATCH] arm64: renesas: Enable FFA on Renesas R-Car X5H R8A78000   Marek Vasut
• [PATCH] arm64: versal2: fix off-by-two OOB write in mem_map_fill()   Prasad Kummari
• [PATCH] arm: am33xx: Default to enabling LTO   Tom Rini
• [PATCH] arm: am33xx: Default to enabling LTO   Tom Rini
• [PATCH] arm: arch_timer: prevent recursive function tracing   Lee Yongjun
• [PATCH] arm: dts: agilex: add U-Boot DT for socdk_nand   Chee, Tien Fong
• [PATCH] arm: dts: imx95-aquila: migrate to OF_UPSTREAM   Rafael Beims
• [PATCH] arm: dts: imx95-aquila: migrate to OF_UPSTREAM   Francesco Dolcini
• [PATCH] arm: dts: imx95-aquila: migrate to OF_UPSTREAM   Peng Fan (OSS)
• [PATCH] arm: dts: imx95-verdin: migrate to OF_UPSTREAM   Rafael Beims
• [PATCH] arm: dts: imx95-verdin: migrate to OF_UPSTREAM   Francesco Dolcini
• [PATCH] arm: dts: mediatek: remove mt6357.dtsi   David Lechner
• [PATCH] arm: dts: mediatek: remove mt8188 tphy fallback   David Lechner
• [PATCH] arm: dts: socfpga: enforce MMC fifo-mode for high-memory access   Chee, Tien Fong
• [PATCH] arm: kirkwood: remove obsolete configs for Zyxel NSA325 board   Tony Dinh
• [PATCH] arm: mach-k3: am625: Wait for TIFS initialization   Markus Schneider-Pargmann
• [PATCH] arm: mach-k3: am625: Wait for TIFS initialization   Kumar, Udit
• [PATCH] arm: mach-k3: am625: Wait for TIFS initialization   Markus Schneider-Pargmann
• [PATCH] arm: mach-k3: j721e: make get_boot_device() available outside xPL   Bryan Brattlof
• [PATCH] arm: mach-k3: j721e: make get_boot_device() available outside xPL   Tom Rini
• [PATCH] arm: mediatek: support firmware A/B selection in SPL   Carlo Caione
• [PATCH] arm: mediatek: support firmware A/B selection in SPL   David Lechner
• [PATCH] arm: mediatek: support firmware A/B selection in SPL   Carlo Caione
• [PATCH] arm: mvebu: armada8k: do not offer the ATF/TEE region as free memory   Tom Rini
• [PATCH] arm: mvebu: helios4_defconfig: enable the RTC   Igor Velkov via B4 Relay
• [PATCH] arm: mx7: Change IVT/DCD address to 0x911000   Nora Schiffer
• [PATCH] arm: renesas: Drop SYS_ARCH_TIMER on R-Car R8A78000 X5H Cortex-M33 RSIP   Marek Vasut
• [PATCH] arm: socfpga: spl: skip HPS SMMU secure config when node absent   Chee, Tien Fong
• [PATCH] arm: socfpga: Update Agilex7M SPL data save and restore implementation   Chee, Tien Fong
• [PATCH] avb: fix missing break in avb_set_state() switch   Naveen Kumar Chaudhary
• [PATCH] avb: fix missing break in avb_set_state() switch   Simon Glass
• [PATCH] avb: fix missing break in avb_set_state() switch   Mattijs Korpershoek
• [PATCH] avb: fix missing break in avb_set_state() switch   Mattijs Korpershoek
• [PATCH] avb: Take a storage interface in the AVB operations   Jan Kehren
• [PATCH] binman: imx9image: respect BINMAN_INDIRS for external files   Michael Walle
• [PATCH] binman: openssl: Make TI K3 certificates reproducible   Rogerio Guerra Borin
• [PATCH] board: anbernic: Fix the RG-DS Kconfig target guard   Pengpeng Hou
• [PATCH] board: anbernic: Fix the RG-DS Kconfig target guard   Chris Morgan
• [PATCH] board: anbernic: Fix the RG-DS Kconfig target guard   Quentin Schulz
• [PATCH] board: anbernic: Fix the RG-DS Kconfig target guard   Quentin Schulz
• [PATCH] board: beacon: Remove Beacon EmbeddedWorks RZ/G2 Dev Kit support   Adam Ford
• [PATCH] board: beacon: Remove Beacon EmbeddedWorks RZ/G2 Dev Kit support   Tom Rini
• [PATCH] board: beacon: Remove Beacon EmbeddedWorks RZ/G2 Dev Kit support   Marek Vasut
• [PATCH] board: beacon: Remove Beacon EmbeddedWorks RZ/G2 Dev Kit support   Tom Rini
• [PATCH] board: beacon: Remove Beacon EmbeddedWorks RZ/G2 Dev Kit support   Adam Ford
• [PATCH] board: beacon: Remove Beacon EmbeddedWorks RZ/G2 Dev Kit support   Marek Vasut
• [PATCH] board: davinci: Remove DA850 EVM support   Adam Ford
• [PATCH] board: davinci: Remove DA850 EVM support   Tom Rini
• [PATCH] board: logicpd: Remove AM3517 EVM support   Adam Ford
• [PATCH] board: logicpd: Remove AM3517 EVM support   Tom Rini
• [PATCH] board: logicpd: Remove i.MX6 SOM support   Adam Ford
• [PATCH] board: logicpd: Remove i.MX6 SOM support   Tom Rini
• [PATCH] board: logicpd: Remove OMAP3 SOM support   Adam Ford
• [PATCH] board: logicpd: Remove OMAP3 SOM support   Tom Rini
• [PATCH] board: tqma6ul: Add missing include   Tom Rini
• [PATCH] board: tqma6ul: Add missing include   Tom Rini
• [PATCH] board: tqma7: imply the DP83867 PHY symbol   Pengpeng Hou
• [PATCH] board: tqma7: imply the DP83867 PHY symbol   Nora Schiffer
• [PATCH] board: xilinx: cpu-info: Fix inverted soc_get_* return value check   Pranav Sanwal
• [PATCH] board: xilinx: cpu-info: Fix inverted soc_get_* return value check   Michal Simek
• [PATCH] board: xilinx: Fix heap buffer overflow in board_name_decode()   Pranav Tilak
• [PATCH] board: xilinx: Fix heap buffer overflow in board_name_decode()   Michal Simek
• [PATCH] board_f: fix use of uninitialized variable in initf_upl()   Naveen Kumar Chaudhary
• [PATCH] board_f: fix use of uninitialized variable in initf_upl()   Simon Glass
• [PATCH] board_f: fix use of uninitialized variable in initf_upl()   Tom Rini
• [PATCH] board_f: fix use of uninitialized variable in initf_upl()   Tom Rini
• [PATCH] board_f: fix use of uninitialized variable in initf_upl()   Simon Glass
• [PATCH] board_f: fix use of uninitialized variable in initf_upl()   Tom Rini
• [PATCH] boot: mention sbox in efi loader boot method doc   Vincent Stehlé
• [PATCH] boot: mention sbox in efi loader boot method doc   Tom Rini
• [PATCH] boot: pxe_utils: Fix leak and double free when using fallback   Suraj Kakade
• [PATCH] bootm: bound-check OS id before indexing boot_os[]   Pranav Sanwal
• [PATCH] bootstage: fix record name fix-up offset in bootstage_unstash()   Naveen Kumar Chaudhary
• [PATCH] bootstage: fix record name fix-up offset in bootstage_unstash()   Simon Glass
• [PATCH] bootstage: fix record name fix-up offset in bootstage_unstash()   Tom Rini
• [PATCH] bootstage: fix unchecked malloc and undersized buffer in bootstage_mark_code()   Naveen Kumar Chaudhary
• [PATCH] bootstage: fix unchecked malloc and undersized buffer in bootstage_mark_code()   Simon Glass
• [PATCH] bootstage: fix unchecked malloc and undersized buffer in bootstage_mark_code()   Tom Rini
• [PATCH] bootstage: fix unchecked malloc and undersized buffer in bootstage_mark_code()   Simon Glass
• [PATCH] bootstage: fix unchecked malloc and undersized buffer in bootstage_mark_code()   Tom Rini
• [PATCH] bootstage: guard against NULL record names during relocation/sizing   Naveen Kumar Chaudhary
• [PATCH] bootstage: guard against NULL record names during relocation/sizing   Tom Rini
• [PATCH] bootstage: guard against NULL record names during relocation/sizing   Simon Glass
• [PATCH] button: imx: add SNVS ON/OFF power key driver   Siddharth Menon
• [PATCH] button: imx: add SNVS ON/OFF power key driver   Fabio Estevam
• [PATCH] clk: clk-uclass: Ignore -ENOSYS in clk_set_default_rates()   Tom Rini
• [PATCH] clk: mediatek: mt8189: match the mmsys compatible   David Lechner
• [PATCH] clk: mediatek: mt8189: match the mmsys compatible   Julien Stephan
• [PATCH] clk: mediatek: mt8189: match the mmsys compatible   Julien Stephan
• [PATCH] clk: mediatek: mt8365: add multimedia clock   Julien Stephan
• [PATCH] clk: qcom: qcs615: add SDCC2 apps clock support   Balaji Selvanathan
• [PATCH] clk: qcom: sa8775p: Add QUPv3 wrapper 3 SPI clock support   test
• [PATCH] cmd: config: Add additional embedded text option   Marek Vasut
• [PATCH] cmd: config: Add additional embedded text option   Tom Rini
• [PATCH] cmd: config: Add additional embedded text option   Marek Vasut
• [PATCH] cmd: config: Add additional embedded text option   Tom Rini
• [PATCH] cmd: config: Add additional embedded text option   Marek Vasut
• [PATCH] cmd: config: Add additional embedded text option   Tom Rini
• [PATCH] cmd: ethsw: support lwIP   Jerome Forissier
• [PATCH] cmd: ethsw: support lwIP   Jerome Forissier
• [PATCH] cmd: mmc: Print also eMMC health info if available   Marek Behún
• [PATCH] cmd: mmc: Print also eMMC health info if available   Kathpalia, Tanmay
• [PATCH] cmd: nand: add .part suffix to dump command and refactor parsing   Qianqiang Liu
• [PATCH] cmd: nand: add .part suffix to dump command and refactor parsing   Qianqiang Liu
• [PATCH] cmd: nand: add .part suffix to dump command and refactor parsing   Tom Rini
• [PATCH] cmd: setexpr: reject division and modulo by zero   Quentin Schulz
• [PATCH] cmd: sf: Add rdreg and wrreg subcommands for SPI NOR register access   Marek Vasut
• [PATCH] cmd: smccc: Implement SMCCC 1.2 support   Marek Vasut
• [PATCH] cmd: smccc: Implement SMCCC 1.2 support   Tom Rini
• [PATCH] cmd: ufetch: avoid truncating storage sizes on 32-bit systems   Han Gao
• Re: [PATCH] cmd: ufetch: avoid truncating storage sizes on 32-bit systems   Heinrich Schuchardt
• [PATCH] cmd: ufetch: avoid truncating storage sizes on 32-bit systems   Tom Rini
• [PATCH] cmd: ufetch: avoid truncating storage sizes on 32-bit systems   Yixun Lan
• [PATCH] configs: an7581_evb: set NR_DRAM_BANKS to 2   Zhengping Zhang
• [PATCH] configs: an7581_evb: set NR_DRAM_BANKS to 2   Tom Rini
• [PATCH] configs: mediatek: remove UFS defconfigs   Julien Stephan
• [PATCH] configs: mediatek: remove UFS defconfigs   Carlo Caione
• [PATCH] configs: mediatek: remove UFS defconfigs   David Lechner
• [PATCH] configs: qcom_qcs8300: store environment on UFS   Balaji Selvanathan
• [PATCH] configs: sc5xx: set default FDT file   Tom Rini
• [PATCH] configs: versal: Add amd_versal_premium_2 config fragment   Michal Simek
• [PATCH] ddr: altera: iossm: wait for mailbox ready before commands   Chee, Tien Fong
• [PATCH] ddr: Fix the SPD EEPROM dependency for Armada XP   Pengpeng Hou
• [PATCH] dfu: mtd: probe before get_mtd_device_nm()   Ralph Siemsen
• [PATCH] dfu: mtd: probe before get_mtd_device_nm()   Mattijs Korpershoek
• [PATCH] Disable SMBIOS table creation for Odroid M2   Milivoje Legenovic
• [PATCH] Disable SMBIOS table creation for Odroid M2   Quentin Schulz
• [PATCH] Disable SMBIOS table creation for Odroid M2   Simon Glass
• [PATCH] Disable SMBIOS table creation for Odroid M2   Milivoje Legenovic
• [PATCH] doc: board: starfive: update jh7110 build output description   E Shattow
• [PATCH] doc: board: starfive: update jh7110 build output description   Leo Liang
• [PATCH] docs: u-boot-stats-v2026.07: Regenerate   Tom Rini
• [PATCH] drivers: clk: n5x: update comment to describe PLL bypass   Chee, Tien Fong
• [PATCH] efi_loader: efi_console: find vidconsole when stdout is a list   Valentin Haudiquet
• Re: [PATCH] efi_loader: efi_console: find vidconsole when stdout is a list   Heinrich Schuchardt
• [PATCH] efi_loader: efi_console: find vidconsole when stdout is a list   Valentin Haudiquet
• [PATCH] efi_loader: fix efi_http_instance free on error   Vincent Stehlé
• [PATCH] efi_loader: fix efi_http_instance free on error   Ilias Apalodimas
• [PATCH] efi_loader: fix string table reallocations   Vincent Stehlé
• [PATCH] efi_loader: fix string table reallocations   Heinrich Schuchardt
• [PATCH] efi_loader: fix string table reallocations   Vincent Stehlé
• [PATCH] efi_loader: fix string table reallocations   Heinrich Schuchardt
• [PATCH] efi_loader: fix string table reallocations   Vincent Stehlé
• [PATCH] efi_loader: fix string table reallocations   Vincent Stehlé
• [PATCH] efi_loader: imply the FS_FAT Kconfig symbol   Pengpeng Hou
• [PATCH] efi_loader: imply the FS_FAT Kconfig symbol   Ilias Apalodimas
• [PATCH] efi_loader: pass GUID by address   Vincent Stehlé
• [PATCH] efi_loader: pass GUID by address   Heinrich Schuchardt
• [PATCH] efi_loader: pass GUID by address   Ilias Apalodimas
• [PATCH] efi_loader: Remove duplicate declarations   Balaji Selvanathan
• [PATCH] efi_loader: remove unused function efi_dp_match()   Vincent Stehlé
• [PATCH] efi_loader: remove unused function efi_dp_match()   Ilias Apalodimas
• [PATCH] env: Update description of single to redundant environment upgrade path   Marek Vasut
• [PATCH] env: Update description of single to redundant environment upgrade path   Tom Rini
• [PATCH] fastboot: block: add 'oem set-block-target' command and runtime override   Vandhiadevan Karunamoorthy
• [PATCH] fastboot: block: add 'oem set-block-target' command and runtime override   Varadarajan Narayanan
• [PATCH] fastboot: block: add 'oem set-block-target' command and runtime override   Guillaume La Roque
• [PATCH] fastboot: block: add 'oem set-block-target' command and runtime override   Vandhiadevan Karunamoorthy
• [PATCH] fastboot: block: add 'oem set-block-target' command and runtime override   Vandhiadevan Karunamoorthy
• [PATCH] fastboot: block: add 'oem set-block-target' command and runtime override   Guillaume La Roque
• [PATCH] fastboot: block: add 'oem set-block-target' command and runtime override   Vandhiadevan Karunamoorthy
• [PATCH] fastboot: fix the RK3328 buffer-address default   Pengpeng Hou
• [PATCH] fastboot: fix the RK3328 buffer-address default   Mattijs Korpershoek
• [PATCH] fastboot: fix the RK3328 buffer-address default   Quentin Schulz
• [PATCH] fastboot: fix the RK3328 buffer-address default   Quentin Schulz
• [PATCH] firmware: zynqmp: Reduce CONFIG_ZYNQMP_IPI dependency scope   Michal Simek
• [PATCH] firmware: zynqmp: Reduce CONFIG_ZYNQMP_IPI dependency scope   Michal Simek
• [PATCH] fix 32bit silent truncation of 64bit offset in mmc_get_env_addr()   Torsten Rupp via B4 Relay
• [PATCH] fix 32bit silent truncation of 64bit offset in mmc_get_env_addr()   Peng Fan
• [PATCH] fpga: versalpl: fix OOB write in versal_align_dma_buffer()   Prasad Kummari
• [PATCH] fpga: versalpl: move PDI load operation into firmware helper   Akshay Belsare
• [PATCH] fpga: xilinx: Check bitstream length against the supplied buffer   Michal Simek
• [PATCH] fs: jffs2: set part->jffs2_priv to NULL after freeing cache   Tom Rini
• [PATCH] fs: ubifs: resolve "." path components   Altair Bueno Calvente
• [PATCH] fw_env: do not create lockfile with read access for others   Rasmus Villemoes
• [PATCH] fw_env: do not create lockfile with read access for others   Tom Rini
• [PATCH] fw_env: use env-size property for nvmem layout device detection   Michael C. Pratt
• [PATCH] fwu: fix read buffer size   Vincent Stehlé
• [PATCH] fwu: fix read buffer size   Kory Maincent
• [PATCH] fwu: fix read buffer size   Ilias Apalodimas
• [PATCH] fwu: fix read buffer size   Vincent Stehlé
• [PATCH] fwu: fix read buffer size   Ilias Apalodimas
• [PATCH] gpio: Add missing dependency for ZYNQMP_GPIO_MODEPIN   Michal Simek
• [PATCH] gpio: Add missing dependency for ZYNQMP_GPIO_MODEPIN   Michal Simek
• [PATCH] gpio: qcom_spmi_gpio: add pmk8350/pm8350c   Casey Connolly
• [PATCH] gpio: qcom_spmi_gpio: add pmk8350/pm8350c   Neil Armstrong
• [PATCH] gpio: qcom_spmi_gpio: fix bias-pull-down   Casey Connolly
• [PATCH] gpio: qcom_spmi_gpio: fix bias-pull-down   Neil Armstrong
• [PATCH] i2c: npcm: Add deblock callback for bus recovery   Jim Liu
• [PATCH] i2c: npcm: Add segment feature for bus select   Jim Liu
• [PATCH] ide: Fix truncation of device strings by one character   Tom Rini
• [PATCH] imx: imx8mm_evk: Indent the config with tabs   Marek Vasut
• [PATCH] include/env.h: use plain old #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG   Tom Rini
• [PATCH] interconnect: qcom: add SC7280 interconnect driver   Neil Armstrong
• [PATCH] jffs2: initialize datacrc for inode/dirent entries built from scan   Tom Rini
• [PATCH] lib: lmb: return -EFAULT for partial bank-boundary overlap   Balaji Selvanathan
• [PATCH] lib: lmb: return -EFAULT for partial bank-boundary overlap   Marek Vasut
• [PATCH] lib: lmb: return -EFAULT for partial bank-boundary overlap   Balaji Selvanathan
• [PATCH] lib: lmb: return -EFAULT for partial bank-boundary overlap   Marek Vasut
• [PATCH] lmb: Add StarFive JH-7110 SoC as requiring DMA below 4G   E Shattow
• [PATCH] lmb: Add StarFive JH-7110 SoC as requiring DMA below 4G   Marek Vasut
• [PATCH] lmb: Add StarFive JH-7110 SoC as requiring DMA below 4G   E Shattow
• [PATCH] lmb: Add StarFive JH-7110 SoC as requiring DMA below 4G   Tom Rini
• [PATCH] lmb: Add StarFive JH-7110 SoC as requiring DMA below 4G   Tom Rini
• [PATCH] mach-snapdragon: skip serial# env set if already present   Balaji Selvanathan
• [PATCH] mach-snapdragon: skip serial# env set if already present   Casey Connolly
• [PATCH] mach-zynq: SPL Boot from QSPI in memory-mapped mode   Michal Simek
• [PATCH] mach-zynq: SPL Boot from QSPI in memory-mapped mode   Michal Simek
• [PATCH] mach-zynq: SPL Boot from QSPI in memory-mapped mode   Mike Looijmans
• [PATCH] mach-zynq: SPL Boot from QSPI in memory-mapped mode   Mike Looijmans
• [PATCH] mach-zynq: SPL Boot from QSPI in memory-mapped mode   Michal Simek
• [PATCH] mach-zynq: SPL Boot from QSPI in memory-mapped mode   Mike Looijmans
• [PATCH] mach-zynq: SPL Boot from QSPI in memory-mapped mode   Michal Simek
• [PATCH] MAINTAINERS: Add missing file entries for some boards   Tony Dinh
• [PATCH] MAINTAINERS: add new SpacemiT custodians   Yixun Lan
• [PATCH] MAINTAINERS: add new SpacemiT custodians   Yao Zi
• [PATCH] MAINTAINERS: add new SpacemiT custodians   Tom Rini
• [PATCH] MAINTAINERS: add new SpacemiT custodians   Yixun Lan
• [PATCH] MAINTAINERS: Change u-boot at lists.denx.de to u-boot at lists.u-boot-project.org   Mike Looijmans
• [PATCH] MAINTAINERS: Change u-boot at lists.denx.de to u-boot at lists.u-boot-project.org   Heiko Schocher
• [PATCH] MAINTAINERS: Change u-boot at lists.denx.de to u-boot at lists.u-boot-project.org   Neil Armstrong
• [PATCH] MAINTAINERS: Fix Lukasz email   Marek Vasut
• [PATCH] MAINTAINERS: Fix Lukasz email   Łukasz Majewski
• [PATCH] MAINTAINERS: Fix Lukasz email   Mattijs Korpershoek
• [PATCH] MAINTAINERS: Include riscv_timer.c in RISC-V entry   Yao Zi
• [PATCH] MAINTAINERS: Include riscv_timer.c in RISC-V entry   Tom Rini
• [PATCH] MAINTAINERS: Include riscv_timer.c in RISC-V entry   Yao Zi
• [PATCH] MAINTAINERS: Replace Apple with N:   Tom Rini
• [PATCH] MAINTAINERS: tee: update Jens Wiklander's email address   Jens Wiklander
• [PATCH] MAINTAINERS: tee: update Jens Wiklander's email address   Ilias Apalodimas
• [PATCH] MAINTAINERS: tee: update Jens Wiklander's email address   Tom Rini
• [PATCH] MAINTAINERS: Update some SoCFPGA related addresses   Tom Rini
• [PATCH] MAINTAINERS: Update some SoCFPGA related addresses   Chee, Tien Fong
• [PATCH] MAINTAINERS: Update some SoCFPGA related addresses   Tom Rini
• [PATCH] mmc: cv1800b_sdhci: configure SDHCI PHY   Andrei Lalaev
• [PATCH] mmc: cv1800b_sdhci: configure SDHCI PHY   Yao Zi
• [PATCH] mmc: cv1800b_sdhci: configure SDHCI PHY   Andrei Lalaev
• [PATCH] mmc: cv1800b_sdhci: configure SDHCI PHY   Andrei Lalaev
• [PATCH] mmc: cv1800b_sdhci: configure SDHCI PHY   Yao Zi
• [PATCH] mmc: dw_mmc: Add the missing MMC_HS400_ES_SUPPORT to mmc_set_card_speed   baozhu.liu
• [PATCH] mmc: dw_mmc: Add the missing MMC_HS400_ES_SUPPORT to mmc_set_card_speed   baozhu.liu
• [PATCH] mmc: dw_mmc: Add the missing MMC_HS400_ES_SUPPORT to mmc_set_card_speed   baozhu.liu
• [PATCH] mmc: dw_mmc: Add the missing MMC_HS400_ES_SUPPORT to mmc_set_card_speed   Kathpalia, Tanmay
• [PATCH] mmc: omap_hsmmc: Add "ti,am437-sdhci" compatible   Tom Rini
• [PATCH] mpc83xx: Fix MPC8360 system PLL dependencies   Pengpeng Hou
• [PATCH] mpc83xx: Fix MPC8360 system PLL dependencies   Tom Rini
• [PATCH] mpc83xx: Fix MPC837X cache way-lock dependencies   Pengpeng Hou
• [PATCH] mpc83xx: Fix MPC837X cache way-lock dependencies   Tom Rini
• [PATCH] mtd: rawnand: allow SYS_NAND_BLOCK_SIZE when SPL_NAND_CADENCE is set   Chee, Tien Fong
• [PATCH] mtd: rawnand: denali: add NAND_DENALI_SKIP_BBTSCAN_SPL Kconfig   Chee, Tien Fong
• [PATCH] mtd: spi: update spi-nor protected property for some flash types   Tony Dinh
• [PATCH] mtd: spi: update spi-nor protected property for some flash types   Takahiro.Kuwano at infineon.com
• [PATCH] mtd: spi: update spi-nor protected property for some flash types   Tony Dinh
• [PATCH] mtd: spinand: consume an mtd index only on successful probe   Tim Kuo
• [PATCH] mtd: spinand: consume an mtd index only on successful probe   Heiko Schocher
• [PATCH] mtd: spinand: fmsh: add support for FM25G01B and FM25G02B   Aleksei Sviridkin
• [PATCH] net: airoha: fix PCS calibration retry limit   Jerome Forissier
• [PATCH] net: airoha: fix PCS calibration retry limit   Jerome Forissier
• [PATCH] net: designware: Disable SGMII auto negotiation on NPCM845   Jim Liu
• [PATCH] net: designware: Fix MDIO bus getting bound multiple times   Sean Anderson
• [PATCH] net: designware: Fix MDIO bus getting bound multiple times   Sean Anderson
• [PATCH] net: dhcp6 use link local address   Yuxiao Zhang
• [PATCH] net: dhcp6 use link local address   Jerome Forissier
• [PATCH] net: dhcp6 use link local address   Yuxiao Zhang
• [PATCH] net: e1000: use all RX descriptors   Vitaliy Sochnev
• [PATCH] net: e1000: use all RX descriptors   Tom Rini
• [PATCH] net: fix UDP checksum check for odd-length packets   Mingtian Li
• [PATCH] net: pcap: support lwIP   Jerome Forissier
• [PATCH] net: pcap: support lwIP   Jerome Forissier
• [PATCH] net: phy: dp83867: fix register number for extended read/write   Nora Schiffer
• [PATCH] net: sandbox: support raw Ethernet with lwIP   Jerome Forissier
• [PATCH] net: ti: cpsw: Skip disabled ports in switch binding   Tom Rini
• [PATCH] net: use non-LL address when solicit is asking non-LL address   Yuxiao Zhang
• [PATCH] pci: dw_amd: Enable CPM6 host1 and quiesce interrupts on init   Pranav Sanwal
• [PATCH] pci: dw_amd: Enable CPM6 host1 and quiesce interrupts on init   Michal Simek
• [PATCH] pci: Iterate over busses using uclass_foreach_dev_probe   Neil Armstrong
• [PATCH] pci: Iterate over busses using uclass_foreach_dev_probe   Marek Vasut
• [PATCH] pci: Iterate over busses using uclass_foreach_dev_probe   Tom Rini
• [PATCH] pci: Iterate over busses using uclass_foreach_dev_probe   Neil Armstrong
• [PATCH] pci: pcie_dw_rockchip: add PCIe reset configuration delay   Quentin Schulz
• [PATCH] phy: phy-imx8mq-usb: add USB PHY tuning support   Tom Hsieh
• [PATCH] phy: phy-imx8mq-usb: add USB PHY tuning support   Francesco Dolcini
• [PATCH] phy: phy-imx8mq-usb: add USB PHY tuning support   Marek Vasut
• [PATCH] phy: phy-imx8mq-usb: add USB PHY tuning support   Frieder Schrempf
• [PATCH] phy: phy-imx8mq-usb: add USB PHY tuning support   Francesco Dolcini
• [PATCH] phy: phy-imx8mq-usb: add USB PHY tuning support   Tom Hsieh
• [PATCH] phy: qcom: qmp-combo: honor USB-C orientation for port select   Casey Connolly
• [PATCH] phy: reject drivers without operations at bind time   Julien Stephan
• [PATCH] power: domain: mtk: remove setting DCM_TOP_EN   Julien Stephan
• [PATCH] power: domain: mtk: remove setting DCM_TOP_EN   Carlo Caione
• [PATCH] power: domain: mtk: remove setting DCM_TOP_EN   David Lechner
• [PATCH] power: regulator: require SCMI firmware for SCMI regulators   Pengpeng Hou
• [PATCH] pwm: add MediaTek display PWM driver   Julien Stephan
• [PATCH] pwm: add MediaTek display PWM driver   Carlo Caione
• [PATCH] ram: stm32mp1: bound the invalid-argument message in stm32mp1_ddr_subcmd()   Patrice CHOTARD
• [PATCH] reset: socfpga: add legacy peripheral reset compatibility Kconfig   Chee, Tien Fong
• [PATCH] Revert "Clean up emails from non-existing domains"   Tom Rini
• [PATCH] Revert "Clean up emails from non-existing domains"   Tom Rini
• [PATCH] riscv: Fix IPI not initialized in riscv_cpu_setup()   Nikita Shubin
• [PATCH] riscv: Fix IPI not initialized in riscv_cpu_setup()   Michal Simek
• [PATCH] riscv: Fix IPI not initialized in riscv_cpu_setup()   Nikita Shubin
• [PATCH] riscv: Fix IPI not initialized in riscv_cpu_setup()   Yao Zi
• [PATCH] riscv: Fix IPI not initialized in riscv_cpu_setup()   Nikita Shubin
• [PATCH] riscv: Fix IPI not initialized in riscv_cpu_setup()   Leo Liang
• [PATCH] riscv: mpfs: imply the CoreQSPI driver   Pengpeng Hou
• [PATCH] riscv: restore ILP32 size types on RV32   Gustavo Henrique Nihei
• [PATCH] riscv: thead: fix D-cache flushing   Han Gao
• [PATCH] riscv: thead: fix D-cache flushing   Yixun Lan
• [PATCH] riscv: thead: fix D-cache flushing   Yao Zi
• [PATCH] riscv: thead: fix D-cache flushing   Yao Zi
• [PATCH] riscv: timer: Fix M-Mode timer   Nikita Shubin
• [PATCH] riscv: timer: Fix M-Mode timer   Yao Zi
• [PATCH] riscv: timer: Fix M-Mode timer   Nikita Shubin
• [PATCH] riscv: timer: Fix M-Mode timer   Yao Zi
• [PATCH] rng: msm_rng: Acquire optional clock even when initialization is skipped   Reza Kurniawan
• [PATCH] rng: msm_rng: Acquire optional clock even when initialization is skipped   Balaji Selvanathan
• [PATCH] simple-pm-bus: Fix clk -ENOSYS check   Tom Rini
• [PATCH] spi: fsl_espi: check user's LSB_FIRST   Tomas Alvarez Vanoli
• [PATCH] spi: fsl_espi: check user's LSB_FIRST   Heiko Schocher
• [PATCH] spi: fsl_espi: check user's LSB_FIRST   Tomas Alvarez Vanoli
• [PATCH] spi: Probe a device tree device at the requested speed   Igor Velkov via B4 Relay
• [PATCH] spi: xilinx_spi: fix premature transfer termination at low SCK   Michal Simek
• [PATCH] spl: mmc: support board-selected raw partitions   Carlo Caione
• [PATCH] spl: mmc: support board-selected raw partitions   Tom Rini
• [PATCH] spl: mmc: support board-selected raw partitions   Carlo Caione
• [PATCH] spl: mmc: support board-selected raw partitions   Carlo Caione
• [PATCH] spl: rename DISABLE_ALL_EXECPTIONS   Vincent Stehlé
• [PATCH] spl: rename DISABLE_ALL_EXECPTIONS   Neil Armstrong
• [PATCH] spl: rename DISABLE_ALL_EXECPTIONS   Ferass El Hafidi
• [PATCH] spl: rename DISABLE_ALL_EXECPTIONS   Tom Rini
• [PATCH] stdio: gate splash_display() on CONFIG_BMP instead of CONFIG_CMD_BMP   Julien Stephan
• [PATCH] stdio: gate splash_display() on CONFIG_BMP instead of CONFIG_CMD_BMP   Tom Rini
• [PATCH] stm32mp1: spl: support loading U-Boot proper from eMMC hardware partitions   Patrice CHOTARD
• [PATCH] stm32mp1: use debug() for image entry point message   Patrice CHOTARD
• [PATCH] sunxi: add TrimUI Smart Pro (A133) board support   leow149
• [PATCH] sunxi: add TrimUI Smart Pro (A133) board support   Tom Rini
• [PATCH] sunxi: orangepi_zero: reduce DRAM clock to 408 MHz   Danil Bezborodov
• [PATCH] sunxi: Reduce inrush current on Olimex OLinuXino-A20-Lime   Christian Ratzenhofer
• [PATCH] test: ut: run every suite in a comma separated list   Anders Roxell
• [PATCH] tools: rkcommon: read the v2 header magic as little-endian   Piotr Kubaj
• [PATCH] tools: rkcommon: read the v2 header magic as little-endian   Philipp Tomsich
• [PATCH] tpm: Add an option to start the TPM during init   Michael Haener
• [PATCH] treewide: Fix STMicroelectronics spelling   Patrice CHOTARD
• [PATCH] u-boot-config/domain-map: Add Qualcomm domains   Balaji Selvanathan
• [PATCH] u-boot-config/domain-map: Add Qualcomm domains   Tom Rini
• [PATCH] u-boot-config/domain-map: Add Qualcomm domains   Balaji Selvanathan
• [PATCH] u-boot-config/domain-map: Add Qualcomm domains   Tom Rini
• [PATCH] u-boot-config/domain-map: Add Qualcomm domains   Tom Rini
• [PATCH] u-boot: fix error check in eth init   Yuxiao Zhang
• [PATCH] u-boot: fix error check in eth init   Yuxiao Zhang
• [PATCH] u-boot: fix error check in eth init   Tom Rini
• [PATCH] u-boot: fix error check in eth init   Jerome Forissier
• [PATCH] ubi: part: Claim only the block device UBI created   Alexey Charkov
• [PATCH] ufs: rcar-gen5: Switch from FASTAUTO mode to FAST mode   Neil Armstrong
• [PATCH] usb: dwc3-generic: Fix ref clock enable error check   Jonas Karlman
• [PATCH] usb: dwc3-generic: Fix ref clock enable error check   Marek Vasut
• [PATCH] usb: dwc3-generic: Fix ref clock enable error check   Tom Rini
• [PATCH] usb: gadget: acm: do not requeue failed RX requests   nacht20-de
• [PATCH] usb: gadget: dwc2_udc_otg: translate DMA addresses via dev_phys_to_bus()   Levi Tomes
• [PATCH] usb: gadget: dwc2_udc_otg: translate DMA addresses via dev_phys_to_bus()   Marek Vasut
• [PATCH] usb: gadget: dwc2_udc_otg: translate DMA addresses via dev_phys_to_bus()   Mattijs Korpershoek
• [PATCH] usb: gadget: f_mass_storage: Optimize CTRL-C responsiveness   Patrice Chotard
• [PATCH] usb: gadget: f_mass_storage: Optimize CTRL-C responsiveness   Marek Vasut
• [PATCH] usb: gadget: f_mass_storage: Optimize CTRL-C responsiveness   Patrice CHOTARD
• [PATCH] usb: gadget: f_mass_storage: Optimize CTRL-C responsiveness   Marek Vasut
• [PATCH] usb: gadget: f_mass_storage: Optimize CTRL-C responsiveness   Patrice CHOTARD
• [PATCH] usb: gadget: f_mass_storage: Optimize CTRL-C responsiveness   Marek Vasut
• [PATCH] usb: gadget: f_mass_storage: Synchronously tear interface down   Marek Vasut
• [PATCH] usb: gadget: f_mass_storage: Synchronously tear interface down   Mattijs Korpershoek
• [PATCH] usb: gadget: f_mass_storage: Synchronously tear interface down   Marek Vasut
• [PATCH] usb: gadget: f_mass_storage: Synchronously tear interface down   Mattijs Korpershoek
• [PATCH] usb: gadget: f_mass_storage: Synchronously tear interface down   Marek Vasut
• [PATCH] usb: gadget: f_mass_storage: Synchronously tear interface down   Mattijs Korpershoek
• [PATCH] usb: gadget: rockusb: terminate full-speed descriptors   Shuqiao Zhang via B4 Relay
• [PATCH] usb: gadget: rockusb: terminate full-speed descriptors   Quentin Schulz
• [PATCH] usb: gadget: rockusb: terminate full-speed descriptors   Marek Vasut
• [PATCH] usb: gadget: rockusb: terminate full-speed descriptors   Marek Vasut
• [PATCH] usb: gadget: rockusb: terminate full-speed descriptors   Mattijs Korpershoek
• [PATCH] usb: gadget: rockusb: terminate full-speed descriptors   Mattijs Korpershoek
• [PATCH] usb: gadget: rockusb: terminate full-speed descriptors   Mattijs Korpershoek
• [PATCH] usb: host: ehci-msm: treat VBUS as valid for extcon controllers   Reza Kurniawan
• [PATCH] usb: xhci-dwc3: Add DM_FLAG_OS_PREPARE flag   Romain Beauxis
• [PATCH] usb: xhci-dwc3: Add DM_FLAG_OS_PREPARE flag   Marek Vasut
• [PATCH] usb: xhci-dwc3: Add DM_FLAG_OS_PREPARE flag   Romain Beauxis
• [PATCH] usb: xhci-dwc3: Add DM_FLAG_OS_PREPARE flag   Marek Vasut
• [PATCH] usb: xhci-dwc3: Add DM_FLAG_OS_PREPARE flag   Romain Beauxis
• [PATCH] usb: xhci-dwc3: Add DM_FLAG_OS_PREPARE flag   Marek Vasut
• [PATCH] usb: xhci-dwc3: Add DM_FLAG_OS_PREPARE flag   Romain Beauxis
• [PATCH] usb: xhci-dwc3: Add DM_FLAG_OS_PREPARE flag   Tom Rini
• [PATCH] usb: xhci-dwc3: Add DM_FLAG_OS_PREPARE flag   Marek Vasut
• [PATCH] video: console: fix scrolling on rotated consoles   Tom Rini
• [PATCH] video: console: fix scrolling on rotated consoles   Simon Glass
• [PATCH] video: console: Handle ESC[0K erase-to-end-of-line   Michal Simek
• [PATCH] video: console: report damage when showing the cursor   Valentin Haudiquet
• [PATCH] video: pwm_backlight: avoid integer overflow in duty cycle calculation (again)   Nora Schiffer
• [PATCH] video: pwm_backlight: avoid integer overflow in duty cycle calculation (again)   Tom Rini
• [PATCH] video: pwm_backlight: support num-interpolated-steps   Julien Stephan
• [PATCH] video: pwm_backlight: support num-interpolated-steps   Carlo Caione
• [PATCH] video: pwm_backlight: support num-interpolated-steps   David Lechner
• [PATCH] video: simplefb: only use stride after a successful read   nacht20-de
• [PATCH] watchdog: Add support for i6300esb   Jan Kiszka
• [PATCH] xilinx: fru: fix OOB access in OEM MAC record parsing   Pranav Tilak
• [PATCH] xilinx: Move u-boot-microblaze to u-boot-amd   Michal Simek
• [PATCH] xilinx: zynqmp: Remove fastboot support from SC defconfig   Pranav Sanwal
• [PATCH] xilinx: zynqmp: Remove fastboot support from SC defconfig   Michal Simek
• [PATCH] xilinx: zynqmp: Remove fastboot support from SC defconfig   Michal Simek
• [PATCH] xyz-modem: only strip trailing ^Z bytes from the final XMODEM block   Graeme Smecher
• [PATCH] zynq-topic-miami.dts: Use fixed-partitions binding for QSPI NOR   Michal Simek
• [PATCH mvebu] arm: mvebu: turris_omnia: Enable the `mmc reg` subcommand   Marek Behún
• [PATCH next 00/13] powerpc: Enable LTO on mpc85xx   Josef Schlehofer
• [PATCH next 01/13] Makefile: Skip undefined symbols in keep-syms-lto.c   Josef Schlehofer
• [PATCH next 01/13] Makefile: Skip undefined symbols in keep-syms-lto.c   Tom Rini
• [PATCH next 02/13] Makefile: Link a toolchain libgcc outside --whole-archive with LTO   Josef Schlehofer
• [PATCH next 02/13] Makefile: Link a toolchain libgcc outside --whole-archive with LTO   Tom Rini
• [PATCH next 03/13] Makefile: Pass -static to the LTO link   Josef Schlehofer
• [PATCH next 04/13] board: nxp: p1_p2_rdb_pc, p1010rdb: Drop unused SPL gd copy   Josef Schlehofer
• [PATCH next 05/13] powerpc: Make the global data pointer LTO safe   Josef Schlehofer
• [PATCH next 06/13] powerpc: mpc85xx: Discard LTO keep-syms sections   Josef Schlehofer
• [PATCH next 07/13] powerpc: mpc85xx: Allow LTO   Josef Schlehofer
• [PATCH next 07/13] powerpc: mpc85xx: Allow LTO   Tom Rini
• [PATCH next 08/13] xpl: Pass the make jobserver to the xPL link   Josef Schlehofer
• [PATCH next 09/13] configs: turris_1x: Enable LTO   Josef Schlehofer
• [PATCH next 10/13] mtd: rawnand: fsl_elbc: Select NAND_ECC_BCH   Josef Schlehofer
• [PATCH next 11/13] board: CZ.NIC: turris_1x: Make NVMe and SCSI boot targets conditional   Josef Schlehofer
• [PATCH next 12/13] configs: turris_1x_nor: Enable CMD_UBI, drop NVMe and SCSI   Josef Schlehofer
• [PATCH next 13/13] board: CZ.NIC: turris_1x: Fix up MACs and serial number from OTP   Josef Schlehofer
• [PATCH next 45/45] binman: gbb: update link   Simon Glass
• [PATCH RESEND 1/2] rng: airoha: add support for the Airoha TRNG   Vitaliy Sochnev
• [PATCH RESEND 1/2] rng: airoha: add support for the Airoha TRNG   Heinrich Schuchardt
• [PATCH RESEND 2/2] configs: an7581_evb: enable the Airoha TRNG   Vitaliy Sochnev
• [PATCH RESEND] regulator: qcom-rpmh-regulator: add support for PM8998   Dzmitry Sankouski
• [PATCH RESEND] regulator: qcom-rpmh-regulator: add support for PM8998   Balaji Selvanathan
• [PATCH RESEND] regulator: qcom-rpmh-regulator: add support for PM8998   Dzmitry Sankouski
• [PATCH RESEND] regulator: qcom-rpmh-regulator: add support for PM8998   Tom Rini
• [PATCH RESEND v4] binman: imx9image: respect BINMAN_INDIRS for external files   Michael Walle
• [PATCH RESEND v5] video: add ChipWealth CH13726A AMOLED panel driver   Advait Dhamorikar
• [PATCH RESEND v9 00/15] Qualcomm IPQ5210 SoC bringup   Varadarajan Narayanan
• [PATCH RESEND v9 01/15] misc: qcom_geni: Add minicore support   Varadarajan Narayanan
• [PATCH RESEND v9 02/15] mach-snapdragon: Kconfig: Auto select options based on configs   Varadarajan Narayanan
• [PATCH RESEND v9 03/15] mach-snapdragon: Add PBL shared data defines   Varadarajan Narayanan
• [PATCH RESEND v9 04/15] mach-snapdragon: spl: Update boot device information in SMEM   Varadarajan Narayanan
• [PATCH RESEND v9 05/15] mach-snapdragon: spl: Add support for MMC booting in SPL   Varadarajan Narayanan
• [PATCH RESEND v9 06/15] mach-snapdragon: Kconfig: Add rules to create SPL images   Varadarajan Narayanan
• [PATCH RESEND v9 07/15] mach-snapdragon: spl: Load next stage FIT image   Varadarajan Narayanan
• [PATCH RESEND v9 08/15] mach-snapdragon: spl: Add DDR initialization support   Varadarajan Narayanan
• [PATCH RESEND v9 09/15] mach-snapdragon: Add Qclib handling support   Varadarajan Narayanan
• [PATCH RESEND v9 10/15] dts: ipq5210-rdp504-u-boot: add override dtsi   Varadarajan Narayanan
• [PATCH RESEND v9 11/15] clk/qcom: add clock driver for ipq5210   Varadarajan Narayanan
• [PATCH RESEND v9 12/15] pinctrl: qcom: Add ipq5210 pinctrl driver   Varadarajan Narayanan
• [PATCH RESEND v9 13/15] mach-snapdragon: spl: ipq5210: Add SPL support   Varadarajan Narayanan
• [PATCH RESEND v9 14/15] configs: Add qcom_ipq5210_mmc_defconfig   Varadarajan Narayanan
• [PATCH RESEND v9 15/15] doc: board/qualcomm: Update RDP build instructions   Varadarajan Narayanan
• [PATCH RFC 00/11] rockchip: SoC info and reset cause printouts   Massimo Pegorer
• [PATCH RFC 00/11] rockchip: SoC info and reset cause printouts   Jonas Karlman
• [PATCH RFC 00/11] rockchip: SoC info and reset cause printouts   Massimo Pegorer
• [PATCH RFC 00/11] rockchip: SoC info and reset cause printouts   Quentin Schulz
• [PATCH RFC 01/11] arm: rockchip: include SoC-specific CRU header file   Massimo Pegorer
• [PATCH RFC 02/11] rockchip: cru: move code from header to source file   Massimo Pegorer
• [PATCH RFC 03/11] rockchip: cru: remove unnecessary common cru.h file   Massimo Pegorer
• [PATCH RFC 04/11] rockchip: cru: improve and simplify reset cause handling   Massimo Pegorer
• [PATCH RFC 05/11] arm: rockchip: support DISPLAY_CPUINFO on all Rockchip SoC   Massimo Pegorer
• [PATCH RFC 06/11] arm: rockchip: unbind cpu-info.c from DISPLAY_CPUINFO   Massimo Pegorer
• [PATCH RFC 07/11] arm: rockchip: print SoC detailed info with DISPLAY_CPUINFO   Massimo Pegorer
• [PATCH RFC 08/11] arm: rockchip: print reset cause only when available   Massimo Pegorer
• [PATCH RFC 09/11] arm: rockchip: do not print SoC info with DISPLAY_BOARDINFO   Massimo Pegorer
• [PATCH RFC 10/11] configs: rockchip: resync Anbernic RG-DS with savedefconfig   Massimo Pegorer
• [PATCH RFC 11/11] configs: rockchip: add DISPLAY_CPUINFO to keep SoC info print   Massimo Pegorer
• [PATCH u-boot 0/3] lib: qrcodegen: import Nayuki QR Code generator   Petr Hodina via B4 Relay
• [PATCH u-boot 0/3] lib: qrcodegen: import Nayuki QR Code generator   Tom Rini
• [PATCH u-boot 0/3] lib: qrcodegen: import Nayuki QR Code generator   Ilias Apalodimas
• [PATCH u-boot 1/3] lib: qrcodegen: Import Nayuki QR Code generator library   Petr Hodina via B4 Relay
• [PATCH u-boot 2/3] lib: qrcodegen: configurable maximum QR code version   Petr Hodina via B4 Relay
• [PATCH u-boot 3/3] lib: qrcodegen: optional gzip pre-compression of payloads   Petr Hodina via B4 Relay
• [PATCH u-boot] net, common: add NET_SKIP_BOOT_INIT for gadget-only   Petr Hodina via B4 Relay
• [PATCH u-boot] net, common: add NET_SKIP_BOOT_INIT for gadget-only   Ilias Apalodimas
• [PATCH u-boot] net, common: add NET_SKIP_BOOT_INIT for gadget-only   phodina
• [PATCH u-boot] net, common: add NET_SKIP_BOOT_INIT for gadget-only   Ilias Apalodimas
• [PATCH u-boot] net, common: add NET_SKIP_BOOT_INIT for gadget-only   phodina
• [PATCH u-boot] net, common: add NET_SKIP_BOOT_INIT for gadget-only   Ilias Apalodimas
• [PATCH u-boot v2 0/3] lib: qrcodegen: import Nayuki QR Code generator   Petr Hodina via B4 Relay
• [PATCH u-boot v2 0/3] lib: qrcodegen: import Nayuki QR Code generator   Peter Robinson
• [PATCH u-boot v2 1/3] lib: qrcodegen: Import Nayuki QR Code generator library   Petr Hodina via B4 Relay
• [PATCH u-boot v2 2/3] lib: qrcodegen: configurable maximum QR code version   Petr Hodina via B4 Relay
• [PATCH u-boot v2 3/3] lib: qrcodegen: optional gzip pre-compression of payloads   Petr Hodina via B4 Relay
• [PATCH v1 0/1] ARM: tegra: Setup simplefb node automatically   Svyatoslav Ryhel
• [PATCH v1 0/2] bootstd: cros: Validate keyblock_size before locating the preamble   Aristo Chen
• [PATCH v1 0/2] bootstd: cros: Validate keyblock_size before locating the preamble   Tom Rini
• [PATCH v1 0/2] imx: deal with the RNG self test of the i.MX6 boot ROM   Heiko Schocher
• [PATCH v1 0/2] imx: deal with the RNG self test of the i.MX6 boot ROM   Fabio Estevam
• [PATCH v1 0/2] imx: deal with the RNG self test of the i.MX6 boot ROM   Heiko Schocher
• [PATCH v1 0/2] imx: deal with the RNG self test of the i.MX6 boot ROM   Fabio Estevam
• [PATCH v1 0/2] imx: deal with the RNG self test of the i.MX6 boot ROM   Heiko Schocher
• [PATCH v1 0/2] imx: deal with the RNG self test of the i.MX6 boot ROM   Fabio Estevam
• [PATCH v1 0/2] mach-snapdragon: Kconfig: fix duplicate SYS_MALLOC_LEN regression   Sumit Singh Dhami
• [PATCH v1 0/2] mach-snapdragon: Kconfig: fix duplicate SYS_MALLOC_LEN regression   Casey Connolly
• [PATCH v1 0/2] mach-snapdragon: Kconfig: fix duplicate SYS_MALLOC_LEN regression   Tom Rini
• [PATCH v1 0/3] fit: use constants for property names in mkimage, boot and SPL   Aristo Chen
• [PATCH v1 0/3] mtd: spi: Microchip 23LCV1024 SPI SRAM   Heiko Schocher
• [PATCH v1 0/3] sysreset: qcom-pshold: Configure PMIC PON reset   Sumit Singh Dhami
• [PATCH v1 0/4] pmbus: read back the VOUT_COMMAND setpoint, fix the nbxv3 VID handoff   Vincent Jardin
• [PATCH v1 0/5] tools: mkimage: support shared image data through the image-data property   Aristo Chen
• [PATCH v1 0/6] arm: npcm8xx: fixes and updates for Arbel NPCM845 EVB   Jim Liu
• [PATCH v1 0/8] gpt: enable writing a full-featured GPT via 'gpt write' over fastboot   Sumit Singh Dhami
• [PATCH v1 0/8] gpt: enable writing a full-featured GPT via 'gpt write' over fastboot   Tom Rini
• [PATCH v1 0/8] gpt: enable writing a full-featured GPT via 'gpt write' over fastboot   Mattijs Korpershoek
• [PATCH v1 0/9] ARM: tegra: Add custom fastboot flash handler   Svyatoslav Ryhel
• [PATCH v1 00/12] qcom: shikra: add eMMC SPL boot support   abhiv
• [PATCH v10 0/7] Improve FIT signature handling   Ludwig Nussel
• [PATCH v10 00/15] add software ecdsa support   Philippe Reynes
• [PATCH v10 00/15] Qualcomm IPQ5210 SoC bringup   Varadarajan Narayanan
• [PATCH v10 00/17] spacemit mmc driver   Eric Chung
• [PATCH v10 01/15] ecdsa: fix support of secp521r1   Philippe Reynes
• [PATCH v10 01/15] misc: qcom_geni: Add minicore support   Varadarajan Narayanan
• [PATCH v10 01/17] spacemit: k1: select boot device via config registers   Tim Ouyang
• [PATCH v10 01/17] spacemit: k1: select boot device via config registers   Eric Chung
• [PATCH v10 01/17] spacemit: k1: select boot device via config registers   Yixun Lan
• [PATCH v10 02/15] mach-snapdragon: Kconfig: Auto select options based on configs   Varadarajan Narayanan
• [PATCH v10 02/15] mbedtls: enable support of ecc   Philippe Reynes
• [PATCH v10 03/15] ecdsa: initial support of ecdsa using mbedtls   Philippe Reynes
• [PATCH v10 03/15] mach-snapdragon: Add PBL shared data defines   Varadarajan Narayanan
• [PATCH v10 04/15] mach-snapdragon: spl: Update boot device information in SMEM   Varadarajan Narayanan
• [PATCH v10 04/15] test: lib: ecdsa: add initial test   Philippe Reynes
• [PATCH v10 05/15] drivers: crypto: add software ecdsa support   Philippe Reynes
• [PATCH v10 05/15] mach-snapdragon: spl: Add support for MMC booting in SPL   Varadarajan Narayanan
• [PATCH v10 06/15] mach-snapdragon: Kconfig: Add rules to create SPL images   Varadarajan Narayanan
• [PATCH v10 06/15] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented   Philippe Reynes
• [PATCH v10 07/15] mach-snapdragon: spl: Load next stage FIT image   Varadarajan Narayanan
• [PATCH v10 07/15] test: py: vboot: prepare integration test for ecdsa   Philippe Reynes
• [PATCH v10 08/15] mach-snapdragon: spl: Add DDR initialization support   Varadarajan Narayanan
• [PATCH v10 08/15] test: vboot: add test for ecdsa   Philippe Reynes
• [PATCH v10 09/15] mach-snapdragon: Add Qclib handling support   Varadarajan Narayanan
• [PATCH v10 09/15] tools: fit_image_setup_sig: set required_keynode to -1   Philippe Reynes
• [PATCH v1 01/12] arm: qcom: add common QCLIB SPL extension helpers   abhiv
• [PATCH v10 1/7] qemu-arm64: merge built-in DT   Ludwig Nussel
• [PATCH v10 10/15] dts: ipq5210-rdp504-u-boot: add override dtsi   Varadarajan Narayanan
• [PATCH v10 10/15] tools: mkimage: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v10 11/15] clk/qcom: add clock driver for ipq5210   Varadarajan Narayanan
• [PATCH v10 11/15] tools: binman: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v10 12/15] boot: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v10 12/15] pinctrl: qcom: Add ipq5210 pinctrl driver   Varadarajan Narayanan
• [PATCH v10 13/15] mach-snapdragon: spl: ipq5210: Add SPL support   Varadarajan Narayanan
• [PATCH v10 13/15] tools: preload_check_sign: add support of ecdsa   Philippe Reynes
• [PATCH v10 14/15] configs: Add qcom_ipq5210_mmc_defconfig   Varadarajan Narayanan
• [PATCH v10 14/15] test: py: vboot: prepare test for global signature with ecdsa   Philippe Reynes
• [PATCH v10 15/15] doc: board/qualcomm: Update RDP build instructions   Varadarajan Narayanan
• [PATCH v10 15/15] test: py: vboot: add test for global signature with ecdsa   Philippe Reynes
• [PATCH v1 02/12] pinctrl: qcom: add Shikra SPL pinctrl option   abhiv
• [PATCH v10 2/7] mkimage: define log_err and log_info   Ludwig Nussel
• [PATCH v1 03/12] board: qualcomm: shikra: add SPL board support   abhiv
• [PATCH v10 3/7] image-fit-sig: Optionally require signatures   Ludwig Nussel
• [PATCH v1 04/12] clk: qcom: add configurable FSM-voted PLL helper   abhiv
• [PATCH v10 4/7] test: vboot: handle CONFIG_FIT_REQUIRE_CONFIG_SIGS in test_vboot   Ludwig Nussel
• [PATCH v1 05/12] arm: dts: shikra: retain QUP firmware dependencies   abhiv
• [PATCH v10 5/7] iminfo: also verify signatures   Ludwig Nussel
• [PATCH v1 06/12] clk: qcom: configure Shikra GPLL6 for SDCC1   abhiv
• [PATCH v10 6/7] test: vboot: refactor run_bootm   Ludwig Nussel
• [PATCH v1 07/12] clk: qcom: enable Shikra QUP wrapper clocks   abhiv
• [PATCH v10 7/7] test: vboot: add iminfo checks   Ludwig Nussel
• [PATCH v1 08/12] misc: qcom_geni: load firmware from declared storage   abhiv
• [PATCH v1 09/12] mmc: msm_sdhci: make tuning callbacks optional   abhiv
• [PATCH v1 1/1] ARM: tegra: Setup simplefb node automatically   Svyatoslav Ryhel
• [PATCH v1 1/2] arm: dts: imx91-9x9-qsb: add U-Boot specific dtsi   alice.guo at oss.nxp.com
• [PATCH v1 1/2] arm: dts: imx91-9x9-qsb: add U-Boot specific dtsi   Fabio Estevam
• [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth.   Guillaume La Roque
• [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth.   Mattijs Korpershoek
• [PATCH v1 1/2] bootstd: cros: Validate keyblock_size before locating the preamble   Aristo Chen
• [PATCH v1 1/2] crypto: fsl: run the CAAM RNG self test on affected i.MX6 chips   Heiko Schocher
• [PATCH v1 1/2] drivers: fpga: Adding Freeze Bridge for PR console support   Chee, Tien Fong
• [PATCH v1 1/2] power: regulator: mpq8785: avoid scan, use DTS address   Vincent Jardin
• [PATCH v1 1/2] Revert "mach-snapdragon: Kconfig: fix duplicate SYS_MALLOC_LEN"   Sumit Singh Dhami
• [PATCH v1 1/3] mtd: spi: add driver for the Microchip 23LCV1024 SPI SRAM   Heiko Schocher
• [PATCH v1 1/3] mtd: spi: add driver for the Microchip 23LCV1024 SPI SRAM   Simon Glass
• [PATCH v1 1/3] mtd: spi: add driver for the Microchip 23LCV1024 SPI SRAM   Heiko Schocher
• [PATCH v1 1/3] sysreset: qcom-pshold: Configure PON reset type   Sumit Singh Dhami
• [PATCH v1 1/3] sysreset: qcom-pshold: Configure PON reset type   Casey Connolly
• [PATCH v1 1/3] tools: mkimage: use constants for FIT property names   Aristo Chen
• [PATCH v1 1/3] tools: mkimage: use constants for FIT property names   Quentin Schulz
• [PATCH v1 1/4] power: regulator: pmbus: check the device in the exported helpers   Vincent Jardin
• [PATCH v1 1/5] tools: mkimage: use an explicit iv from the cipher node when encrypting   Aristo Chen
• [PATCH v1 1/5] tools: mkimage: use an explicit iv from the cipher node when encrypting   Simon Glass
• [PATCH v1 1/6] board: nuvuton: arbel: fix incorrect ram size   Jim Liu
• [PATCH v1 1/8] disk: part_efi: fix first/last usable LBA computation   Sumit Singh Dhami
• [PATCH v1 1/8] disk: part_efi: fix first/last usable LBA computation   Simon Glass
• [PATCH v1 1/9] fastboot: Add board_fastboot_flash/erase/get_part_info hooks   Svyatoslav Ryhel
• [PATCH v1 10/12] arm: qcom: enable MMU and cache setup for Shikra SPL   abhiv
• [PATCH v11 00/17] spacemit mmc driver   Eric Chung
• [PATCH v11 01/17] spacemit: k1: select boot device via config registers   Eric Chung
• [PATCH v11 02/17] mmc: k1: add sdhci platform driver   Eric Chung
• [PATCH v11 03/17] riscv: dts: spacemit: define a SPI controller node   Eric Chung
• [PATCH v11 03/17] riscv: dts: spacemit: define a SPI controller node   Yixun Lan
• [PATCH v11 03/17] riscv: dts: spacemit: define a SPI controller node   Eric Chung
• [PATCH v11 04/17] riscv: dts: spacemit: k1: add SD card controller and pinctrl support   Eric Chung
• [PATCH v11 05/17] riscv: dts: spacemit: k1-bananapi-f3: add SD card support with UHS modes   Eric Chung
• [PATCH v11 06/17] riscv: dts: spacemit: k1-musepi-pro: add PMIC and power infrastructure   Eric Chung
• [PATCH v11 07/17] riscv: dts: spacemit: k1-musepi-pro: add 24c02 eeprom   Eric Chung
• [PATCH v11 08/17] riscv: dts: spacemit: k1-musepi-pro: enable QSPI and add SPI NOR   Eric Chung
• [PATCH v11 09/17] riscv: dts: spacemit: k1-musepi-pro: enable USB 3 ports   Eric Chung
• [PATCH v1 11/12] configs: qcom: add Shikra SPL defconfig   abhiv
• [PATCH v11 10/17] riscv: dts: spacemit: k1-musepi-pro: enable PCIe ports   Eric Chung
• [PATCH v11 11/17] riscv: dts: spacemit: k1-musepi-pro: set default console baud rate   Eric Chung
• [PATCH v11 12/17] riscv: dts: spacemit: k1-musepi-pro: add SD card support with UHS modes   Eric Chung
• [PATCH v11 13/17] dts: k1: enable mmc devices in SPL   Eric Chung
• [PATCH v11 14/17] configs: k1: enable SD and eMMC support   Eric Chung
• [PATCH v11 15/17] MAINTAINER: update Spacemit K1 entry   Eric Chung
• [PATCH v11 16/17] doc: spacemit: flash on K1 SoC based boards   Eric Chung
• [PATCH v11 17/17] spacemit: k1: fix product name detection and DTB matching in SPL   Eric Chung
• [PATCH v1 12/12] board: qualcomm: shikra: embed XBL-sec in SPL ELF   abhiv
• [PATCH v1 2/2] board: imx91_qsb: Add i.MX91 9x9 QSB support   alice.guo at oss.nxp.com
• [PATCH v1 2/2] board: imx91_qsb: Add i.MX91 9x9 QSB support   Fabio Estevam
• [PATCH v1 2/2] boot: android: Add AVB verification support for different bootflow.   Guillaume La Roque
• [PATCH v1 2/2] imx: hab: name the event left behind by the boot ROM RNG self test   Heiko Schocher
• [PATCH v1 2/2] mach-snapdragon: Kconfig: fix duplicate SYS_MALLOC_LEN   Sumit Singh Dhami
• [PATCH v1 2/2] pmbus: be generic for any devices   Vincent Jardin
• [PATCH v1 2/2] test: bootstd: Cover invalid ChromiumOS keyblock and preamble metadata   Aristo Chen
• [PATCH v1 2/3] arm: dts: qcom: Configure Lemans PS_HOLD reset   Sumit Singh Dhami
• [PATCH v1 2/3] arm: dts: qcom: Configure Lemans PS_HOLD reset   Casey Connolly
• [PATCH v1 2/3] boot: fit: use constants for FIT property names   Aristo Chen
• [PATCH v1 2/3] boot: fit: use constants for FIT property names   Quentin Schulz
• [PATCH v1 2/3] sandbox: spi: let a slave name the driver that emulates it   Heiko Schocher
• [PATCH v1 2/3] sandbox: spi: let a slave name the driver that emulates it   Simon Glass
• [PATCH v1 2/3] sandbox: spi: let a slave name the driver that emulates it   Heiko Schocher
• [PATCH v1 2/4] power: regulator: pmbus: read back the VOUT_COMMAND setpoint   Vincent Jardin
• [PATCH v1 2/5] tools: mkimage: resolve image-data references between FIT images   Aristo Chen
• [PATCH v1 2/5] tools: mkimage: resolve image-data references between FIT images   Simon Glass
• [PATCH v1 2/6] npcm8xx: remove system timer configuration   Jim Liu
• [PATCH v1 2/8] disk: part_efi: support writing full 64-bit GPT partition attributes   Sumit Singh Dhami
• [PATCH v1 2/8] disk: part_efi: support writing full 64-bit GPT partition attributes   Simon Glass
• [PATCH v1 2/9] ARM: tegra: Refactor BCT patching process   Svyatoslav Ryhel
• [PATCH v12 0/7] spacemit mmc driver   Eric Chung
• [PATCH v12 1/7] spacemit: k1: select boot device via config registers   Eric Chung
• [PATCH v12 2/7] mmc: k1: add sdhci platform driver   Eric Chung
• [PATCH v12 2/7] mmc: k1: add sdhci platform driver   Yao Zi
• [PATCH v12 2/7] mmc: k1: add sdhci platform driver   Eric Chung
• [PATCH v12 2/7] mmc: k1: add sdhci platform driver   Yixun Lan
• [PATCH v12 3/7] dts: k1: enable mmc devices in SPL   Eric Chung
• [PATCH v12 4/7] configs: k1: enable SD and eMMC support   Eric Chung
• [PATCH v12 5/7] MAINTAINER: update Spacemit K1 entry   Eric Chung
• [PATCH v12 6/7] doc: spacemit: flash on K1 SoC based boards   Eric Chung
• [PATCH v12 6/7] doc: spacemit: flash on K1 SoC based boards   Yao Zi
• [PATCH v12 6/7] doc: spacemit: flash on K1 SoC based boards   Eric Chung
• [PATCH v12 6/7] doc: spacemit: flash on K1 SoC based boards   Yao Zi
• [PATCH v12 6/7] doc: spacemit: flash on K1 SoC based boards   Yixun Lan
• [PATCH v12 7/7] spacemit: k1: fix product name detection and DTB matching in SPL   Eric Chung
• [PATCH v1 3/3] configs: disable CMD_POWEROFF in snagboot config   Sumit Singh Dhami
• [PATCH v1 3/3] configs: disable CMD_POWEROFF in snagboot config   Casey Connolly
• [PATCH v1 3/3] spl: fit: use constants for FIT property names   Aristo Chen
• [PATCH v1 3/3] spl: fit: use constants for FIT property names   Quentin Schulz
• [PATCH v1 3/3] test: dm: add a test for the Microchip 23LCV1024 SPI SRAM   Heiko Schocher
• [PATCH v1 3/3] test: dm: add a test for the Microchip 23LCV1024 SPI SRAM   Simon Glass
• [PATCH v1 3/3] test: dm: add a test for the Microchip 23LCV1024 SPI SRAM   Heiko Schocher
• [PATCH v1 3/4] test: dm: pmbus: test pmbus_regulator_read_vout_command()   Vincent Jardin
• [PATCH v1 3/5] tools: mkimage: share the external-data region between image-data images   Aristo Chen
• [PATCH v1 3/5] tools: mkimage: share the external-data region between image-data images   Simon Glass
• [PATCH v1 3/6] board: nuvoton: arbel: Configure GFX interface   Jim Liu
• [PATCH v1 3/8] disk: part_efi: read full GPT partition attributes   Sumit Singh Dhami
• [PATCH v1 3/8] disk: part_efi: read full GPT partition attributes   Simon Glass
• [PATCH v1 3/9] ARM: tegra: Add custom fastboot flash handler   Svyatoslav Ryhel
• [PATCH v13 0/7] spacemit mmc driver   Eric Chung
• [PATCH v13 0/7] spacemit mmc driver   Yixun Lan
• [PATCH v13 0/7] spacemit mmc driver   Yixun Lan
• [PATCH v13 1/7] spacemit: k1: select boot device via config registers   Eric Chung
• [PATCH v13 2/7] mmc: k1: add sdhci platform driver   Eric Chung
• [PATCH v13 2/7] mmc: k1: add sdhci platform driver   Yixun Lan
• [PATCH v13 2/7] mmc: k1: add sdhci platform driver   Yixun Lan
• [PATCH v13 3/7] dts: k1: enable mmc devices in SPL   Eric Chung
• [PATCH v13 4/7] configs: k1: enable SD and eMMC support   Eric Chung
• [PATCH v13 5/7] MAINTAINER: update Spacemit K1 entry   Eric Chung
• [PATCH v13 6/7] doc: spacemit: flash on K1 SoC based boards   Eric Chung
• [PATCH v13 7/7] spacemit: k1: fix product name detection and DTB matching in SPL   Eric Chung
• [PATCH v1 4/4] board: nbxv3: VID handoff writes table value, no droop compensation   Vincent Jardin
• [PATCH v1 4/5] tools: mkimage: include image-data sharers in the load overlap check   Aristo Chen
• [PATCH v1 4/5] tools: mkimage: include image-data sharers in the load overlap check   Simon Glass
• [PATCH v1 4/6] configs: arbel_evb: enable additional commands and drivers   Jim Liu
• [PATCH v1 4/8] cmd: gpt: support setting full 64-bit GPT partition attributes   Sumit Singh Dhami
• [PATCH v1 4/8] cmd: gpt: support setting full 64-bit GPT partition attributes   Tom Rini
• [PATCH v1 4/8] cmd: gpt: support setting full 64-bit GPT partition attributes   Simon Glass
• [PATCH v1 4/9] configs: tegra: Enable TEGRA_FASTBOOT_FLASH option   Svyatoslav Ryhel
• [PATCH v1 5/5] test: py: add tests for the FIT image-data property   Aristo Chen
• [PATCH v1 5/5] test: py: add tests for the FIT image-data property   Simon Glass
• [PATCH v1 5/6] configs: arbel: add network timeout and watchdog stop env settings   Jim Liu
• [PATCH v1 5/8] cmd: gpt: report partition attributes via 'gpt setenv'   Sumit Singh Dhami
• [PATCH v1 5/8] cmd: gpt: report partition attributes via 'gpt setenv'   Simon Glass
• [PATCH v1 5/9] crypto: tegra_aes: Add support for Tegra124   Svyatoslav Ryhel
• [PATCH v1 6/6] ARM: dts: NPCM: modify ethernet delay time Modify npcm8xx ethernet reset delay time.   Jim Liu
• [PATCH v1 6/8] doc: gpt: document 'attrs' key and gpt_partition_attrs var   Sumit Singh Dhami
• [PATCH v1 6/8] doc: gpt: document 'attrs' key and gpt_partition_attrs var   Tom Rini
• [PATCH v1 6/8] doc: gpt: document 'attrs' key and gpt_partition_attrs var   Simon Glass
• [PATCH v1 6/9] ARM: tegra124: Add AES engine node and enable it for Mi Pad   Svyatoslav Ryhel
• [PATCH v1 7/8] usb: gadget: fastboot: allow configuring the endpoint buffer size   Sumit Singh Dhami
• [PATCH v1 7/8] usb: gadget: fastboot: allow configuring the endpoint buffer size   Tom Rini
• [PATCH v1 7/8] usb: gadget: fastboot: allow configuring the endpoint buffer size   Simon Glass
• [PATCH v1 7/9] ARM: tegra: n1: Add bsev node   Svyatoslav Ryhel
• [PATCH v1 8/8] configs: add fastboot config options for writing GPT   Sumit Singh Dhami
• [PATCH v1 8/9] board: tegra: Update ebtupdate usage   Svyatoslav Ryhel
• [PATCH v1 9/9] doc: cmd: Update ebtupdate description and document bctupdate command   Svyatoslav Ryhel
• [PATCH v1] arm: mediatek: add BPi-R3 Mini eMMC board support   Lucien.Jheng
• [PATCH v1] arm: mediatek: add BPi-R3 Mini eMMC board support   Daniel Golle
• [PATCH v1] arm: mediatek: add BPi-R3 Mini eMMC board support   Frank Wunderlich
• [PATCH v1] arm: mediatek: add BPi-R3 Mini eMMC board support   Lucien.Jheng
• [PATCH v1] arm: mediatek: add BPi-R3 Mini eMMC board support   Frank Wunderlich
• [PATCH v1] arm: mediatek: add BPi-R3 Mini eMMC board support   David Lechner
• [PATCH v1] armv8: fsl-layerscape: icid: also find DWC3 nodes as fsl, ls1028a-dwc3   Vincent Jardin
• [PATCH v1] armv8: mmu: sync emergency page table attribute updates   Aswin Murugan
• [PATCH v1] binman: nxp_imx8mcst: allow selecting the SRK table index   Heiko Schocher
• [PATCH v1] binman: nxp_imx8mcst: allow selecting the SRK table index   Simon Glass
• [PATCH v1] mach-snapdragon: map DRAM bank gaps to avoid reserved-memory MMU failures   Aswin Murugan
• [PATCH v1] mach-snapdragon: map DRAM bank gaps to avoid reserved-memory MMU failures   Casey Connolly
• [PATCH v1] mach-snapdragon: page-align reserved-memory regions   Aswin Murugan
• [PATCH v1] misc: qcom_geni: gate late firmware loading behind Kconfig option   Aswin Murugan
• [PATCH v1] misc: qcom_geni: gate late firmware loading behind Kconfig option   neil.armstrong at linaro.org
• [PATCH v1] misc: qcom_geni: gate late firmware loading behind Kconfig option   Casey Connolly
• [PATCH v1] mtd: spi-nor-ids: gd55lb02gf: add SPI_NOR_DUAL_READ   Vincent Jardin
• [PATCH v1] net: fsl_ls_mdio: add match fsl,fman-memac-mdio   Vincent Jardin
• [PATCH v1] Revert "configs: qcs615/qcs9100: Enable watchdog autostart"   Aswin Murugan
• [PATCH v1] Revert "configs: qcs615/qcs9100: Enable watchdog autostart"   Casey Connolly
• [PATCH v1] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Stefan Eichenberger
• [PATCH v1] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Marek Vasut
• [PATCH v1] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Stefan Eichenberger
• [PATCH v1] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Marek Vasut
• [PATCH v1] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Tom Hsieh
• [PATCH v1] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Stefan Eichenberger
• [PATCH v1] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Marek Vasut
• [PATCH v1] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Tom Hsieh
• [PATCH v1] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Tom Hsieh
• [PATCH v1] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Stefan Eichenberger
• [PATCH v2 0/1] mmc: core: Add power-off-delay-us support for slow RC discharge   Judith Mendez
• [PATCH v2 0/2] board: sophgo: add support for Milk-V Duo 256M   Hiago De Franco
• [PATCH v2 0/2] board: sophgo: add support for Milk-V Duo 256M   Andrei Lalaev
• [PATCH v2 0/2] board: xilinx: board_name_decode() allocation fix and weak ft_board_setup()   Sriram Sriram
• [PATCH v2 0/2] board: xilinx: board_name_decode() allocation fix and weak ft_board_setup()   Michal Simek
• [PATCH v2 0/2] board: xilinx: board_name_decode() allocation fix and weak ft_board_setup()   Sriram Sriram
• [PATCH v2 0/2] bootmeth: efi_mgr: Report EFI boot manager failures to bootflow   Aristo Chen
• [PATCH v2 0/2] button: imx: port snvs_pwrkey driver to u-boot   Siddharth Menon
• [PATCH v2 0/2] button: imx: port snvs_pwrkey driver to u-boot   Siddharth Menon
• [PATCH v2 0/2] clk: mediatek: mt8366: add new clock driver   David Lechner
• [PATCH v2 0/2] Close the FIT signature fail-open on the image gate   Eva Crystal
• [PATCH v2 0/2] Correct behavior of BLOBLIST_PASSAGE_MANDATORY   Tom Rini
• [PATCH v2 0/2] efi: fix and test hii string table reallocations   Vincent Stehlé
• [PATCH v2 0/2] imx: deal with the RNG self test of the i.MX6 boot ROM   Heiko Schocher
• [PATCH v2 0/2] net: fix Ethernet unbind/rebind with reset on zynq_gem   Graeme Smecher
• [PATCH v2 0/2] pinctrl: fix on Spacemit K1 SoC   Eric Chung
• [PATCH v2 0/2] pinctrl: fix on Spacemit K1 SoC   Yixun Lan
• [PATCH v2 0/2] pinctrl: mediatek: add support for MT8196   Arnaud Ferraris
• [PATCH v2 0/2] qcom_geni: idempotent GENI firmware re-initialization   test
• [PATCH v2 0/2] riscv: spacemit: add pinctrl support for K3 SoC   Yixun Lan
• [PATCH v2 0/2] riscv: timer: Fix M-mode early timer support   Nikita Shubin
• [PATCH v2 0/2] scripts: dtc cpp flags via response file, GNU Make 4.0 cleanup   Suraj Kakade
• [PATCH v2 0/2] Support board-selected raw partitions   Carlo Caione
• [PATCH v2 0/2] sysreset: qcom-pshold: configure PON reset-type for reset via PS_HOLD   Sumit Singh Dhami
• [PATCH v2 0/2] tools: mkimage: add SpacemiT K3 boot image support   Junhui Liu
• [PATCH v2 0/2] video: fix build with VIDEO && !VIDEO_LOGO   Julien Stephan
• [PATCH v2 0/2] video: fix build with VIDEO && !VIDEO_LOGO   Tom Rini
• [PATCH v2 0/2] Watchdog support for qemu arm and riscv   Jan Kiszka
• [PATCH v2 0/3] Add Genio 510 and 700 BootROM download agents   Carlo Caione
• [PATCH v2 0/3] Bounds hardening in NFS, TFTP and ext4   Sriram Sriram
• [PATCH v2 0/3] Improve logging on missing uclass   Tom Rini
• [PATCH v2 0/3] phy: mediatek: add MIPI DSI PHY driver   Julien Stephan
• [PATCH v2 0/3] qcom: Enable HS200/HS400 eMMC modes on Qualcomm platforms   Aswin Murugan
• [PATCH v2 0/4] Add GDSC flags, fix checking of non-POLL_CFG_GDSCR GDSCs   Balaji Selvanathan
• [PATCH v2 0/4] Add initial support for Raspberry Pi Pico 2 (RP2350)   Bhargav Das
• [PATCH v2 0/4] Add preliminary support for MSM8917   Reza Kurniawan
• [PATCH v2 0/4] cmd: optee_rpmb: make it usable by scripts   Rasmus Villemoes
• [PATCH v2 0/4] cmd: optee_rpmb: make it usable by scripts   Ilias Apalodimas
• [PATCH v2 0/4] dm: gpio: read GPIOs in of_to_plat(), request them in probe()   Mehmet Fide
• [PATCH v2 0/4] dm: gpio: read GPIOs in of_to_plat(), request them in probe()   Tom Rini
• [PATCH v2 0/4] fit: use constants for property names in mkimage, boot and SPL   Aristo Chen
• [PATCH v2 0/4] mtd: spi-nor: split SFDP, ID database, and fixups   Takahiro Kuwano via B4 Relay
• [PATCH v2 0/4] pci: enable designware pci and phy on spacemit k1 SoC   Eric Chung
• [PATCH v2 0/4] pci: enable designware pci and phy on spacemit k1 SoC   Yixun Lan
• [PATCH v2 0/4] pci: enable designware pci and phy on spacemit k1 SoC   Yixun Lan
• [PATCH v2 0/4] qcom: add support for the Arduino VENTUNO Q (QCS8275)   Tyler Baker
• [PATCH v2 0/4] qcom: Reduce boot time by avoiding unnecessary initialization and probes   Aswin Murugan
• [PATCH v2 0/4] sdm845: Configure USB3/DP combo properly   David Heidelberg via B4 Relay
• [PATCH v2 0/4] tools: qcom: mkmbn: Updates to support ipq5210   Varadarajan Narayanan
• [PATCH v2 0/5] binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Jérémie Dautheribes
• [PATCH v2 0/5] board: lx2160a: runtime SerDes 1 lane grouping for LX2160A boards   Vincent Jardin
• [PATCH v2 0/5] board: lx2160a: runtime SerDes 1 lane grouping for LX2160A boards   Vladimir Oltean
• [PATCH v2 0/5] board: lx2160a: runtime SerDes 1 lane grouping for LX2160A boards   Vincent Jardin
• [PATCH v2 0/5] efi: ECPT EBBR conformance profiles   Vincent Stehlé
• [PATCH v2 0/5] fit: cipher: bounds checks on the ciphered image path   Tom Rini
• [PATCH v2 0/5] Fix logic of OF_OMIT_DTB and remove useless dts files   Tom Rini
• [PATCH v2 0/5] optee: Add support for enumerating RPMB-dependent services   Ilias Apalodimas
• [PATCH v2 0/5] optee: Add support for enumerating RPMB-dependent services   Jan Kiszka
• [PATCH v2 0/5] spi: Convert drivers to dev_read_* APIs   Tom Rini
• [PATCH v2 0/6] arm: npcm8xx: fixes and updates for Arbel NPCM845 EVB   Jim Liu
• [PATCH v2 0/6] fs: Add 9P filesystem support over virtio   Kuan-Wei Chiu
• [PATCH v2 0/6] RISC-V SPL: fix OpenSBI FULL FIT loading   Nikita Shubin
• [PATCH v2 0/6] RISC-V SPL: fix OpenSBI FULL FIT loading   Nikita Shubin
• [PATCH v2 0/7] binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Jérémie Dautheribes (Schneider Electric)
• [PATCH v2 0/7] disk: Fix the GPT layout on media with large logical blocks   Alexey Charkov
• [PATCH v2 0/7] Enable PCI functionality on AM654 at U-Boot proper   Siddharth Vadapalli
• [PATCH v2 0/7] tools: mkimage: support shared image data through the image-data property   Aristo Chen
• [PATCH v2 0/7] usb: fix DWC3/gadget issues and enable USB on Toradex i.MX95 boards   Stefan Eichenberger
• [PATCH v2 0/8] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A)   Vincent Jardin
• [PATCH v2 0/8] bootm: size the noload buffer from the compressor header   Tom Rini
• [PATCH v2 0/8] spacemit: k3: add clock and reset support   Yixun Lan
• [PATCH v2 0/9] arm64: meson: Add s4 support   Sean Anderson
• [PATCH v2 0/9] arm64: qcom: Add initial support for Nord SoC   Aswin Murugan
• [PATCH v2 00/10] net: share the lwIP runtime and support netconsole   James Hilliard
• [PATCH v2 00/10] net: share the lwIP runtime and support netconsole   Jerome Forissier
• [PATCH v2 00/10] net: share the lwIP runtime and support netconsole   Jerome Forissier
• [PATCH v2 00/10] spl: ufs: Add support for loading U-Boot from boot W-LU   Alexey Charkov
• [PATCH v2 00/11] clk: mediatek: code cleanup   Julien Stephan
• [PATCH v2 00/11] imagemap: on-demand FIT loading from storage   Tom Rini
• [PATCH v2 00/11] spl: fit: Generalize compression support   Alexey Charkov
• [PATCH v2 00/11] spl: fit: Generalize compression support   Quentin Schulz
• [PATCH v2 00/11] spl: fit: Generalize compression support   Alexey Charkov
• [PATCH v2 00/11] spl: fit: Generalize compression support   Quentin Schulz
• [PATCH v2 00/11] spl: fit: Generalize compression support   Alexey Charkov
• [PATCH v2 00/12] qcom: shikra: add eMMC SPL boot support   Abhilash V
• [PATCH v2 00/13] pxe_utils: small fixups, implement BLS type 1 boot on top of them   Tom Rini
• [PATCH v2 00/15] ddr: altera: n5x: add DDR retention support   Chen Huei Lok
• [PATCH v2 00/16] arm: airoha: add AN7583 SoC support   Mikhail Kshevetskiy
• [PATCH v2 01/10] net: lwip: return ERR_ABRT after aborting wget receive   James Hilliard
• [PATCH v2 01/10] spl: Decide about Falcon mode boot only once   Quentin Schulz
• [PATCH v2 01/10] ufs: hand sense data to the SCSI layer   Alexey Charkov
• [PATCH v2 01/11] boot: image: Keep the image-type table out of xPL   Alexey Charkov
• [PATCH v2 01/11] boot: image: Keep the image-type table out of xPL   Quentin Schulz
• [PATCH v2 01/11] boot: image: Keep the image-type table out of xPL   Heinrich Schuchardt
• [PATCH v2 01/11] clk: mediatek: mt8188: make the clock trees static   Julien Stephan
• [PATCH v2 01/12] arm: qcom: add common QCLIB SPL extension helpers   Abhilash V
• [PATCH v2 01/15] misc: fs_loader: Add QSPI RAW partition loading support   Chen Huei Lok
• [PATCH v2 01/16] airoha: add support for Airoha AN7583 SoC   Mikhail Kshevetskiy
• [PATCH v2 01/16] airoha: add support for Airoha AN7583 SoC   Tom Rini
• [PATCH v2 02/10] net: split netconsole transport from stdio frontend   James Hilliard
• [PATCH v2 02/10] scsi: repeat an INQUIRY that a unit attention interrupted   Alexey Charkov
• [PATCH v2 02/11] clk: mediatek: add a helper to declare gate-only clock trees   Julien Stephan
• [PATCH v2 02/11] lib: Build xxhash in the SPL phase   Alexey Charkov
• [PATCH v2 02/11] lib: Build xxhash in the SPL phase   Tom Rini
• [PATCH v2 02/12] pinctrl: qcom: add Shikra SPL pinctrl option   Abhilash V
• [PATCH v2 02/15] arm: dts: socfpga: n5x: add DDR retention calibration backup nodes   Chen Huei Lok
• [PATCH v2 02/16] arm: airoha: introduce AN7583 helpers to get SCU and CHIP_SCU regmaps   Mikhail Kshevetskiy
• [PATCH v2 03/10] net: netconsole: use unsigned port numbers   James Hilliard
• [PATCH v2 03/10] scsi: size a well known unit from the unit it stands in for   Alexey Charkov
• [PATCH v2 03/11] clk: mediatek: use MTK_GATE_CLK_TREE() for the gate-only clock trees   Julien Stephan
• [PATCH v2 03/11] lib: Let SPL minify zstd on its own   Alexey Charkov
• [PATCH v2 03/11] lib: Let SPL minify zstd on its own   Heinrich Schuchardt
• [PATCH v2 03/11] lib: Let SPL minify zstd on its own   Alexey Charkov
• [PATCH v2 03/12] board: qualcomm: shikra: add SPL board support   Abhilash V
• [PATCH v2 03/15] arm: socfpga: n5x: enable QSPI mailbox before DDR init   Chen Huei Lok
• [PATCH v2 03/16] dt-bindings: clock: airoha: Document support for AN7583 clock   Mikhail Kshevetskiy
• [PATCH v2 03/16] dt-bindings: clock: airoha: Document support for AN7583 clock   Tom Rini
• [PATCH v2 04/10] net: netconsole: cache environment settings   James Hilliard
• [PATCH v2 04/10] scsi: allow a controller to declare well known logical units   Alexey Charkov
• [PATCH v2 04/11] clk: mediatek: mt8183: merge the clock drivers into a single driver   Julien Stephan
• [PATCH v2 04/11] lib: Track whether a phase has a decompressor   Alexey Charkov
• [PATCH v2 04/11] lib: Track whether a phase has a decompressor   Tom Rini
• [PATCH v2 04/12] clk: qcom: add configurable FSM-voted PLL helper   Abhilash V
• [PATCH v2 04/15] ddr: altera: n5x: Add self-refresh support in DDR4   Chen Huei Lok
• [PATCH v2 04/16] clk: airoha: add support for Airoha AN7583 SoC clock   Mikhail Kshevetskiy
• [PATCH v2 05/10] net: lwip: allow DNS callbacks to be canceled   James Hilliard
• [PATCH v2 05/10] scsi: add a lookup by target and LUN   Alexey Charkov
• [PATCH v2 05/11] clk: mediatek: mt8188: merge the clock drivers into a single driver   Julien Stephan
• [PATCH v2 05/11] spl: fit: Decompress any supported algorithm   Alexey Charkov
• [PATCH v2 05/11] spl: fit: Decompress any supported algorithm   Tom Rini
• [PATCH v2 05/11] spl: fit: Decompress any supported algorithm   Quentin Schulz
• [PATCH v2 05/12] arm: dts: shikra: retain QUP firmware dependencies   Abhilash V
• [PATCH v2 05/15] configs: socfpga: n5x: enable required configs for DDR retention   Chen Huei Lok
• [PATCH v2 05/16] reset: airoha: Add support for Airoha AN7583 reset   Mikhail Kshevetskiy
• [PATCH v2 05/16] reset: airoha: Add support for Airoha AN7583 reset   Tom Rini
• [PATCH v2 06/10] binman: Add support for pre-patching FDTs in a FIT with a /chosen node   Quentin Schulz
• [PATCH v2 06/10] binman: Add support for pre-patching FDTs in a FIT with a /chosen node   Alexey Charkov
• [PATCH v2 06/10] binman: Add support for pre-patching FDTs in a FIT with a /chosen node   Quentin Schulz
• [PATCH v2 06/10] binman: Add support for pre-patching FDTs in a FIT with a /chosen node   Alexey Charkov
• [PATCH v2 06/10] binman: Add support for pre-patching FDTs in a FIT with a /chosen node   Quentin Schulz
• [PATCH v2 06/10] binman: Add support for pre-patching FDTs in a FIT with a /chosen node   Alexey Charkov
• [PATCH v2 06/10] binman: Add support for pre-patching FDTs in a FIT with a /chosen node   Quentin Schulz
• [PATCH v2 06/10] net: lwip: add an HTTP client abort operation   James Hilliard
• [PATCH v2 06/10] part: name the well known logical unit device type   Alexey Charkov
• [PATCH v2 06/11] clk: mediatek: mt8189: merge the clock drivers into a single driver   Julien Stephan
• [PATCH v2 06/11] test: spl: Keep the payload create_fit() is handed   Alexey Charkov
• [PATCH v2 06/12] clk: qcom: configure Shikra GPLL6 for SDCC1   Abhilash V
• [PATCH v2 06/15] ddr: altera: n5x: set DDR init progress bit for watchdog recovery   Chen Huei Lok
• [PATCH v2 06/16] net: airoha: add support for Airoha AN7583   Mikhail Kshevetskiy
• [PATCH v2 07/10] net: lwip: allow DHCP to stop without releasing its lease   James Hilliard
• [PATCH v2 07/10] ufs: define the well known logical unit ids   Alexey Charkov
• [PATCH v2 07/11] clk: mediatek: mt8195: merge the clock drivers into a single driver   Julien Stephan
• [PATCH v2 07/11] test: spl: Size the FIT properties for the image name   Alexey Charkov
• [PATCH v2 07/12] clk: qcom: enable Shikra QUP wrapper clocks   Abhilash V
• [PATCH v2 07/15] ddr: altera: n5x: re-init DDR when double-bit ECC error is detected   Chen Huei Lok
• [PATCH v2 07/16] airoha: add Ethernet node in AN7583 dtsi   Mikhail Kshevetskiy
• [PATCH v2 08/10] net: lwip: share one network runtime between clients   James Hilliard
• [PATCH v2 08/10] rockchip: spl: default to Falcon mode boot in SPL if enabled   Quentin Schulz
• [PATCH v2 08/10] rockchip: spl: default to Falcon mode boot in SPL if enabled   Quentin Schulz
• [PATCH v2 08/10] ufs: report the logical unit the boot W-LU presents   Alexey Charkov
• [PATCH v2 08/11] clk: mediatek: mt8365: merge the clock drivers into a single driver   Julien Stephan
• [PATCH v2 08/11] test: spl: Cover FIT image decompression   Alexey Charkov
• [PATCH v2 08/12] misc: qcom_geni: load firmware from declared storage   Abhilash V
• [PATCH v2 08/15] ddr: altera: n5x: re-init DDR after watchdog reset from init hang   Chen Huei Lok
• [PATCH v2 08/16] airoha: add MMC node for Airoha AN7583   Mikhail Kshevetskiy
• [PATCH v2 09/10] rockchip: binman: Add support for Falcon mode FIT images with TF-A+Linux   Quentin Schulz
• [PATCH v2 09/10] rockchip: binman: Add support for Falcon mode FIT images with TF-A+Linux   Alexey Charkov
• [PATCH v2 09/10] rockchip: binman: Add support for Falcon mode FIT images with TF-A+Linux   Andrew Davis
• [PATCH v2 09/10] rockchip: binman: Add support for Falcon mode FIT images with TF-A+Linux   Quentin Schulz
• [PATCH v2 09/10] rockchip: binman: Add support for Falcon mode FIT images with TF-A+Linux   Quentin Schulz
• [PATCH v2 09/10] test: dm: cover the shared lwIP runtime   James Hilliard
• [PATCH v2 09/10] ufs: expose the boot logical unit as a block device   Alexey Charkov
• [PATCH v2 09/11] clk: mediatek: mt8512: merge the clock drivers into a single driver   Julien Stephan
• [PATCH v2 09/11] sandbox: spl: Enable zstd   Alexey Charkov
• [PATCH v2 09/12] mmc: msm_sdhci: make tuning callbacks optional   Abhilash V
• [PATCH v2 09/15] ddr: altera: n5x: return error on invalid DDR controller type   Chen Huei Lok
• [PATCH v2 09/16] configs: an7583: add mii/mdio support   Mikhail Kshevetskiy
• [PATCH v2 1/1] mmc: core: Add power-off-delay-us support for slow RC discharge   Judith Mendez
• [PATCH v2 1/2] arch: arm: dts: socfpga: Update L4_SYS Security Control Register size   Chee, Tien Fong
• [PATCH v2 1/2] arm64: dts: rockchip: Add HINLINK H28K   Chukun Pan
• [PATCH v2 1/2] arm64: dts: rockchip: Add HINLINK H28K   Quentin Schulz
• [PATCH v2 1/2] arm64: dts: rockchip: Add HINLINK H28K   Tom Rini
• [PATCH v2 1/2] board: xilinx: Check calloc() result in board_name_decode()   Sriram Sriram
• [PATCH v2 1/2] bootmeth: efi_mgr: Do not discard the EFI boot manager error   Aristo Chen
• [PATCH v2 1/2] button: imx: add SNVS ON/OFF power key driver   Siddharth Menon
• [PATCH v2 1/2] configs: add generic efi_secureboot.config fragment   Heinrich Schuchardt
• [PATCH v2 1/2] crypto: fsl: run the CAAM RNG self test on affected i.MX6 chips   Heiko Schocher
• [PATCH v2 1/2] drivers: clk: n5x: Fix incorrect EMAC clock source selection   Chee, Tien Fong
• [PATCH v2 1/2] efi_loader: fix string table reallocations   Vincent Stehlé
• [PATCH v2 1/2] efi_loader: remove debug in platform_get_rng_device   Ilias Apalodimas
• [PATCH v2 1/2] image-fit-sig: also require signatures on the image gate   Eva Crystal
• [PATCH v2 1/2] lib: display_options: add snprint_size()   Heinrich Schuchardt
• [PATCH v2 1/2] misc: qcom_geni: fix NULL pointer dereference in qcom_geni_load_firmware()   test
• [PATCH v2 1/2] net: zynq_gem: plug resource leaks in .probe error and .remove paths   Graeme Smecher
• [PATCH v2 1/2] pinctrl: k1: fix drive strength configuration   Eric Chung
• [PATCH v2 1/2] pinctrl: mediatek: further increase max number of base addresses   Arnaud Ferraris
• [PATCH v2 1/2] pinctrl: spacemit: configure drive strength based on power source   Yixun Lan
• [PATCH v2 1/2] riscv: timer: Enable early timer for M‑mode   Nikita Shubin
• [PATCH v2 1/2] riscv: timer: Enable early timer for M‑mode   Yao Zi
• [PATCH v2 1/2] riscv: timer: Enable early timer for M‑mode   Nikita Shubin
• [PATCH v2 1/2] rng: airoha: add support for the Airoha TRNG   Vitaliy Sochnev
• [PATCH v2 1/2] rtc: ds1307: support register offsets   Alexander Feilke
• [PATCH v2 1/2] rtc: ds1307: support register offsets   Tom Rini
• [PATCH v2 1/2] scripts: pass dtc cpp flags via a GCC response file   Suraj Kakade
• [PATCH v2 1/2] spl: mmc: select the boot partition after device initialization   Carlo Caione
• [PATCH v2 1/2] sysreset: qcom-pshold: configure PON reset type before deasserting PS_HOLD   Sumit Singh Dhami
• [PATCH v2 1/2] tools: mkimage: add SpacemiT K3 boot image support   Junhui Liu
• [PATCH v2 1/2] tools: mkimage: add SpacemiT K3 boot image support   Yixun Lan
• [PATCH v2 1/2] tools: mkimage: add SpacemiT K3 boot image support   Yao Zi
• [PATCH v2 1/2] tools: mkimage: add SpacemiT K3 boot image support   Junhui Liu
• [PATCH v2 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support   Thinh Nguyen
• [PATCH v2 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support   Mattijs Korpershoek
• [PATCH v2 1/2] video: remove show_splash()   Julien Stephan
• [PATCH v2 1/2] video: remove show_splash()   Tom Rini
• [PATCH v2 1/2] watchdog: Add support for i6300esb   Jan Kiszka
• [PATCH v2 1/3] arm: mediatek: enable SPL fastboot DAs on Genio 510 and 700   Carlo Caione
• [PATCH v2 1/3] arm: mediatek: enable SPL fastboot DAs on Genio 510 and 700   David Lechner
• [PATCH v2 1/3] arm: mediatek: enable SPL fastboot DAs on Genio 510 and 700   Carlo Caione
• [PATCH v2 1/3] mmc: msm_sdhci: fix max-frequency read into wrong-sized variable   Aswin Murugan
• [PATCH v2 1/3] mmc: msm_sdhci: fix max-frequency read into wrong-sized variable   Kathpalia, Tanmay
• [PATCH v2 1/3] net: nfs: add bounds checks on memcpy into stack-allocated rpc_pkt   Sriram Sriram
• [PATCH v2 1/3] net: nfs: add bounds checks on memcpy into stack-allocated rpc_pkt   Jerome Forissier
• [PATCH v2 1/3] phy: sort vendor subdirectory lists alphabetically   Julien Stephan
• [PATCH v2 1/4] arm: Add RP2350 architecture support   Bhargav Das
• [PATCH v2 1/4] board: qualcomm: tfa-optee: enable the OP-TEE library   Tyler Baker
• [PATCH v2 1/4] cmd: optee_rpmb: sanitize TEE_ERROR -> E* translations   Rasmus Villemoes
• [PATCH v2 1/4] cmd: optee_rpmb: sanitize TEE_ERROR -> E* translations   Mattijs Korpershoek
• [PATCH v2 1/4] efi_loader: skip fs probe for non-ESP GPT partitions   Aswin Murugan
• [PATCH v2 1/4] efi_loader: skip fs probe for non-ESP GPT partitions   Mark Kettenis
• [PATCH v2 1/4] efi_loader: skip fs probe for non-ESP GPT partitions   Ilias Apalodimas
• [PATCH v2 1/4] gpio: add a way to parse a GPIO now and request it later   Mehmet Fide
• [PATCH v2 1/4] mach-snapdragon: Carve out reserved memory at init for MSM8917   Reza Kurniawan
• [PATCH v2 1/4] mtd: spi-nor: move SFDP logic out of the core   Takahiro Kuwano via B4 Relay
• [PATCH v2 1/4] phy: qcom: qmp-combo: select PCS register offsets per version   David Heidelberg via B4 Relay
• [PATCH v2 1/4] phy: spacemit: add K1 PCIe/USB3 combo PHY driver   Eric Chung
• [PATCH v2 1/4] tools: mkimage: use FIT_ALGO_PROP for the signature algo property   Aristo Chen
• [PATCH v2 1/4] tools: mkimage: use FIT_ALGO_PROP for the signature algo property   Simon Glass
• [PATCH v2 1/4] tools: qcom: mkmbn: Fix ipq5424 MBN version   Varadarajan Narayanan
• [PATCH v2 1/5] efi_loader: adjust EBBR 2.1 ECPT entry   Vincent Stehlé
• [PATCH v2 1/5] lx2160: add lx2160_sd1 100g4x25g and lx2160_serdes status   Vincent Jardin
• [PATCH v2 1/5] lx2160: add lx2160_sd1 100g4x25g and lx2160_serdes status   Vladimir Oltean
• [PATCH v2 1/5] lx2160: add lx2160_sd1 100g4x25g and lx2160_serdes status   Vincent Jardin
• [PATCH v2 1/5] lx2160: add lx2160_sd1 100g4x25g and lx2160_serdes status   Vladimir Oltean
• [PATCH v2 1/5] tee: optee: Factor out service enumeration and binding functions   Ilias Apalodimas
• [PATCH v2 1/5] tee: optee: Factor out service enumeration and binding functions   Jan Kiszka
• [PATCH v2 1/5] tee: optee: Factor out service enumeration and binding functions   Jan Kiszka
• [PATCH v2 1/5] tee: optee: Factor out service enumeration and binding functions   Ilias Apalodimas
• [PATCH v2 1/6] board: nuvuton: arbel: fix incorrect ram size   Jim Liu
• [PATCH v2 1/6] image: fit: allow IH_OS_OPENSBI in fit_image_load()   Nikita Shubin
• [PATCH v2 1/6] net: 9p: Add 9P2000.L protocol support   Simon Glass
• [PATCH v2 1/7] binman: add nxp_imxcst base etype for i.MX CST signing   Jérémie Dautheribes (Schneider Electric)
• [PATCH v2 1/7] disk: part_efi: Size the partition entry array from the block size   Alexey Charkov
• [PATCH v2 1/7] include: image: drop the duplicate FIT_ALGO_PROP definition   Aristo Chen
• [PATCH v2 1/7] include: image: drop the duplicate FIT_ALGO_PROP definition   Simon Glass
• [PATCH v2 1/7] phy: ti: phy-ti-am654: fix logic for programming clock parent   Siddharth Vadapalli
• [PATCH v2 1/7] usb: ci_udc: add driver model support   Stefan Eichenberger
• [PATCH v2 1/8] board: nxp: add Nodebox v3 CPU Module (LX2160A)   Vincent Jardin
• [PATCH v2 1/8] clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc()   Yixun Lan
• [PATCH v2 1/9] arm64: meson: Add s4 SoC support   Sean Anderson
• [PATCH v2 1/9] dt-bindings: clock: qcom: add the definition for the USB2 PHY reset   Aswin Murugan
• [PATCH v2 10/10] doc: falcon: Describe booting the OS through TF-A   Quentin Schulz
• [PATCH v2 10/10] net: netconsole: add an lwIP transport   James Hilliard
• [PATCH v2 10/10] spl: ufs: allow loading U-Boot from the boot logical unit   Alexey Charkov
• [PATCH v2 10/11] binman: Allow choosing the compression level   Alexey Charkov
• [PATCH v2 10/11] clk: mediatek: mt8516: merge the clock drivers into a single driver   Julien Stephan
• [PATCH v2 10/12] arm: qcom: enable MMU and cache setup for Shikra SPL   Abhilash V
• [PATCH v2 10/15] ddr: altera: n5x: use correct cast for reset status register read   Chen Huei Lok
• [PATCH v2 10/16] arm: dts: an7583: add mdio child node to switch node   Mikhail Kshevetskiy
• [PATCH v2 11/11] clk: mediatek: mt8518: merge the clock drivers into a single driver   Julien Stephan
• [PATCH v2 11/11] rockchip: Choose FIT payload compression via Kconfig   Alexey Charkov
• [PATCH v2 11/11] rockchip: Choose FIT payload compression via Kconfig   Quentin Schulz
• [PATCH v2 11/11] rockchip: Choose FIT payload compression via Kconfig   Alexey Charkov
• [PATCH v2 11/11] rockchip: Choose FIT payload compression via Kconfig   Tom Rini
• [PATCH v2 11/11] rockchip: Choose FIT payload compression via Kconfig   Quentin Schulz
• [PATCH v2 11/12] configs: qcom: add Shikra SPL defconfig   Abhilash V
• [PATCH v2 11/15] ddr: altera: n5x: fix debug log typo   Chen Huei Lok
• [PATCH v2 11/16] net: airoha: add support for Airoha AN7583 PCS driver   Mikhail Kshevetskiy
• [PATCH v2 12/12] board: qualcomm: shikra: embed XBL-sec in SPL ELF   Abhilash V
• [PATCH v2 12/15] ddr: altera: n5x: rename is_ddr_init_skipped() and quieten reset log   Chen Huei Lok
• [PATCH v2 12/16] airoha: add PCS node for AN7583   Mikhail Kshevetskiy
• [PATCH v2 13/15] ddr: altera: n5x: drop always-false unsigned less-than-zero checks   Chen Huei Lok
• [PATCH v2 13/16] configs: enable PCS for Airoha AN7583   Mikhail Kshevetskiy
• [PATCH v2 14/15] ddr: altera: n5x: reconfigure DDR when mem-clk handoff changes   Chen Huei Lok
• [PATCH v2 14/16] net: Add support for Airoha AN7583 MDIO Controller   Mikhail Kshevetskiy
• [PATCH v2 15/15] ddr: altera: n5x: Replay PIE handoff on DDR retention restore   Chen Huei Lok
• [PATCH v2 15/16] an7583: fix system controller mdio nodes   Mikhail Kshevetskiy
• [PATCH v2 16/16] an7583: enable MDIO_AIROHA by default   Mikhail Kshevetskiy
• [PATCH v2 2/2] arch: arm: dts: socfpga: Update system manager core registers masking bits   Chee, Tien Fong
• [PATCH v2 2/2] board: qemu: arm/riscv: Probe watchdogs late   Jan Kiszka
• [PATCH v2 2/2] board: rockchip: add HINLINK H28K   Chukun Pan
• [PATCH v2 2/2] board: rockchip: add HINLINK H28K   Quentin Schulz
• [PATCH v2 2/2] board: xilinx: Make ft_board_setup() weak   Sriram Sriram
• [PATCH v2 2/2] cmd: qcom_geni: add idempotent qcom_geni fw init command   test
• [PATCH v2 2/2] cmd: qcom_geni: add idempotent qcom_geni fw init command   Casey Connolly
• [PATCH v2 2/2] configs: an7581_evb: enable the Airoha TRNG   Vitaliy Sochnev
• [PATCH v2 2/2] configs: qcom-snagboot: enable poweroff via sysreset uclass   Sumit Singh Dhami
• [PATCH v2 2/2] doc: board: spacemit: document the SpacemiT boot image format   Junhui Liu
• [PATCH v2 2/2] doc: usage: add EFI Secure Boot guide   Heinrich Schuchardt
• [PATCH v2 2/2] drivers: clk: n5x: Use FIELD_GET for EMAC clock source selection   Chee, Tien Fong
• [PATCH v2 2/2] efi_loader: consider type of platform_get_rng_device() return value   Ilias Apalodimas
• [PATCH v2 2/2] efi_selftest: test set_string() HII string table realloc   Vincent Stehlé
• [PATCH v2 2/2] imx8mp/mq_evk: enable SNVS power button   Siddharth Menon
• [PATCH v2 2/2] imx: hab: name the event left behind by the boot ROM RNG self test   Heiko Schocher
• [PATCH v2 2/2] Makefile: drop GNU Make < 4.0 compatibility code   Suraj Kakade
• [PATCH v2 2/2] net: eth-phy: release the reset GPIO on device removal   Graeme Smecher
• [PATCH v2 2/2] pinctrl: k1: add IO power domain configuration support   Eric Chung
• [PATCH v2 2/2] pinctrl: mediatek: add pinctrl driver for MT8196   Arnaud Ferraris
• [PATCH v2 2/2] pinctrl: spacemit: k3: add K3 pin support   Yixun Lan
• [PATCH v2 2/2] riscv: timer: Make RISCV_TIMER definitions weak   Nikita Shubin
• [PATCH v2 2/2] riscv: timer: Make RISCV_TIMER definitions weak   Yao Zi
• [PATCH v2 2/2] riscv: timer: Make RISCV_TIMER definitions weak   Nikita Shubin
• [PATCH v2 2/2] rtc: ds1307: add initial support for EPSON RX8130   Alexander Feilke
• [PATCH v2 2/2] spl: mmc: support dynamic selection in raw partition mode   Carlo Caione
• [PATCH v2 2/2] spl: mmc: support dynamic selection in raw partition mode   Tom Rini
• [PATCH v2 2/2] spl: mmc: support dynamic selection in raw partition mode   Carlo Caione
• [PATCH v2 2/2] spl: mmc: support dynamic selection in raw partition mode   Tom Rini
• [PATCH v2 2/2] test: boot: Check that efi_mgr boot failures are reported   Aristo Chen
• [PATCH v2 2/2] test: vboot: add coverage for a control FDT with no /signature node   Eva Crystal
• [PATCH v2 2/2] video: fix build with CONFIG_VIDEO && !CONFIG_VIDEO_LOGO   Julien Stephan
• [PATCH v2 2/2] video: fix build with CONFIG_VIDEO && !CONFIG_VIDEO_LOGO   Tom Rini
• [PATCH v2 2/3] arm: mediatek: enable U-Boot fastboot DAs on Genio 510 and 700   Carlo Caione
• [PATCH v2 2/3] arm: mediatek: enable U-Boot fastboot DAs on Genio 510 and 700   David Lechner
• [PATCH v2 2/3] arm: mediatek: enable U-Boot fastboot DAs on Genio 510 and 700   Carlo Caione
• [PATCH v2 2/3] mmc: msm_sdhci: add HS200/HS400 support   Aswin Murugan
• [PATCH v2 2/3] net: tftp: verify the OACK packet is NUL terminated   Sriram Sriram
• [PATCH v2 2/3] net: tftp: verify the OACK packet is NUL terminated   Jerome Forissier
• [PATCH v2 2/3] phy: mediatek: move MediaTek PHY drivers to their own subdirectory   Julien Stephan
• [PATCH v2 2/4] arm: dts: Add RP2350 device tree   Bhargav Das
• [PATCH v2 2/4] configs: add qcom_sm8550_defconfig and debug fragment   Varadarajan Narayanan
• [PATCH v2 2/4] configs: add qcom_sm8550_defconfig and debug fragment   Casey Connolly
• [PATCH v2 2/4] configs: qcom: disable malloc pool zero-init on boot   Aswin Murugan
• [PATCH v2 2/4] mach-snapdragon: allow selecting the boot CPU   Tyler Baker
• [PATCH v2 2/4] mtd: spi-nor: import manufacturer driver concept from Linux   Takahiro Kuwano via B4 Relay
• [PATCH v2 2/4] optee_ta_avb.h: add TA_AVB_CMD_READ_PERSIST_VALUE2 define   Rasmus Villemoes
• [PATCH v2 2/4] optee_ta_avb.h: add TA_AVB_CMD_READ_PERSIST_VALUE2 define   Mattijs Korpershoek
• [PATCH v2 2/4] optee_ta_avb.h: add TA_AVB_CMD_READ_PERSIST_VALUE2 define   Rasmus Villemoes
• [PATCH v2 2/4] optee_ta_avb.h: add TA_AVB_CMD_READ_PERSIST_VALUE2 define   Rasmus Villemoes
• [PATCH v2 2/4] optee_ta_avb.h: add TA_AVB_CMD_READ_PERSIST_VALUE2 define   Ilias Apalodimas
• [PATCH v2 2/4] optee_ta_avb.h: add TA_AVB_CMD_READ_PERSIST_VALUE2 define   Rasmus Villemoes
• [PATCH v2 2/4] pci: spacemit: add DesignWare PCIe host controller driver   Eric Chung
• [PATCH v2 2/4] pci: spacemit: add DesignWare PCIe host controller driver   Yixun Lan
• [PATCH v2 2/4] pci: spacemit: add DesignWare PCIe host controller driver   Neil Armstrong
• [PATCH v2 2/4] phy: qcom: qmp-combo: add SDM845 support   David Heidelberg via B4 Relay
• [PATCH v2 2/4] pinctrl: qcom: Add pinctrl driver for MSM8917   Reza Kurniawan
• [PATCH v2 2/4] regulator: claim the enable GPIO at probe time, not in of_to_plat()   Mehmet Fide
• [PATCH v2 2/4] tools: mkimage: use the name argument in fdt_property_file()   Aristo Chen
• [PATCH v2 2/4] tools: mkimage: use the name argument in fdt_property_file()   Simon Glass
• [PATCH v2 2/5] board: lx2160a: convert SD1 2x100GE to 2x40GE at runtime   Vincent Jardin
• [PATCH v2 2/5] efi_loader: add EBBR 2.2-2.4 ECPT entries   Vincent Stehlé
• [PATCH v2 2/5] tee: optee: Add support for enumerating services that only need RPMB   Ilias Apalodimas
• [PATCH v2 2/5] tee: optee: Add support for enumerating services that only need RPMB   Jan Kiszka
• [PATCH v2 2/5] tee: optee: Add support for enumerating services that only need RPMB   Ilias Apalodimas
• [PATCH v2 2/6] common: spl: ram: Add LOAD_FIT_FULL support   Nikita Shubin
• [PATCH v2 2/6] fs: 9p: Add 9P filesystem support   Simon Glass
• [PATCH v2 2/6] npcm8xx: remove system timer configuration   Jim Liu
• [PATCH v2 2/7] binman: nxp_imx8mcst: use the nxp_imxcst base etype   Jérémie Dautheribes (Schneider Electric)
• [PATCH v2 2/7] disk: part_efi: Add missing endianness conversions   Alexey Charkov
• [PATCH v2 2/7] disk: part_efi: Add missing endianness conversions   Heinrich Schuchardt
• [PATCH v2 2/7] disk: part_efi: Add missing endianness conversions   Alexey Charkov
• [PATCH v2 2/7] pci: pcie_dw_ti: fetch num-lanes from the device-tree and use it   Siddharth Vadapalli
• [PATCH v2 2/7] pci: pcie_dw_ti: fetch num-lanes from the device-tree and use it   neil.armstrong at linaro.org
• [PATCH v2 2/7] tools: mkimage: use an explicit iv from the cipher node when encrypting   Aristo Chen
• [PATCH v2 2/7] usb: ehci-mx6: bind the ChipIdea gadget driver   Stefan Eichenberger
• [PATCH v2 2/8] clk: spacemit: ccu_mix: add inverted enable gate clock   Yixun Lan
• [PATCH v2 2/8] doc: board: nxp: add the Nodebox v3 CPU Module   Vincent Jardin
• [PATCH v2 2/9] clk: meson: a1: Eliminate separate id parameter   Sean Anderson
• [PATCH v2 2/9] clk: qcom: add GCC driver for nord   Aswin Murugan
• [PATCH v2 3/3] configs: qcom: enable CONFIG_MMC_HS400_SUPPORT   Aswin Murugan
• [PATCH v2 3/3] doc: board: mediatek: document Genio download agents   Carlo Caione
• [PATCH v2 3/3] fs: ext4: widen ext4fs_update() block-group loop counter   Sriram Sriram
• [PATCH v2 3/3] fs: ext4: widen ext4fs_update() block-group loop counter   Tony Dinh
• [PATCH v2 3/3] fs: ext4: widen ext4fs_update() block-group loop counter   Sriram Sriram
• [PATCH v2 3/3] fs: ext4: widen ext4fs_update() block-group loop counter   Tom Rini
• [PATCH v2 3/3] fs: ext4: widen ext4fs_update() block-group loop counter   Sriram Sriram
• [PATCH v2 3/3] fs: ext4: widen ext4fs_update() block-group loop counter   Tony Dinh
• [PATCH v2 3/3] fs: ext4: widen ext4fs_update() block-group loop counter   Sriram Sriram
• [PATCH v2 3/3] phy: phy-mtk-mipi-dsi: add new driver   Julien Stephan
• [PATCH v2 3/4] board: qualcomm: add Arduino VENTUNO Q support   Tyler Baker
• [PATCH v2 3/4] board: raspberrypi: Add Pico 2 support   Bhargav Das
• [PATCH v2 3/4] boot: fit: use constants for FIT property names   Aristo Chen
• [PATCH v2 3/4] boot: fit: use constants for FIT property names   Simon Glass
• [PATCH v2 3/4] clk: qcom: Add an option to poll for GDSCR GDSC_POWER_ON bit   Reza Kurniawan
• [PATCH v2 3/4] clk: qcom: Add an option to poll for GDSCR GDSC_POWER_ON bit   Alexey Minnekhanov
• [PATCH v2 3/4] clk: qcom: Add an option to poll for GDSCR GDSC_POWER_ON bit   Reza Kurniawan
• [PATCH v2 3/4] clk: qcom: Add an option to poll for GDSCR GDSC_POWER_ON bit   Balaji Selvanathan
• [PATCH v2 3/4] clk: qcom: Add an option to poll for GDSCR GDSC_POWER_ON bit   Reza Kurniawan
• [PATCH v2 3/4] clk: qcom: Add an option to poll for GDSCR GDSC_POWER_ON bit   Alexey Minnekhanov
• [PATCH v2 3/4] cmd: optee_rpmb: allocate large enough buffer when reading persistent value   Rasmus Villemoes
• [PATCH v2 3/4] cmd: optee_rpmb: allocate large enough buffer when reading persistent value   Mattijs Korpershoek
• [PATCH v2 3/4] configs: k1: enable PCIe and NVMe support   Eric Chung
• [PATCH v2 3/4] doc: driver-model: state that of_to_plat() must not probe or claim   Mehmet Fide
• [PATCH v2 3/4] mtd: spi-nor: move flash info entries to manufacturer drivers   Takahiro Kuwano via B4 Relay
• [PATCH v2 3/4] power: regulator: qcom-rpmh: add PM8998 support   David Heidelberg via B4 Relay
• [PATCH v2 3/4] scsi: Add scsi_scan_new() to scan only new devices   Aswin Murugan
• [PATCH v2 3/4] tools: qcom: mkmbn: Add support for ipq5210   Varadarajan Narayanan
• [PATCH v2 3/4] tools: qcom: mkmbn: Add support for ipq5210   Balaji Selvanathan
• [PATCH v2 3/5] board: lx2160a: split SD1's second 40GE port into 4x 10G   Vincent Jardin
• [PATCH v2 3/5] lib: uuid: add EBBR 2.2-2.4 conformance profile GUIDs   Vincent Stehlé
• [PATCH v2 3/5] tee: optee: Do not warn about TEE_ERROR_STORAGE_NOT_AVAILABLE   Ilias Apalodimas
• [PATCH v2 3/5] tee: optee: Do not warn about TEE_ERROR_STORAGE_NOT_AVAILABLE   Jan Kiszka
• [PATCH v2 3/5] tee: optee: Do not warn about TEE_ERROR_STORAGE_NOT_AVAILABLE   Ilias Apalodimas
• [PATCH v2 3/6] board: nuvoton: arbel: Configure GFX interface   Jim Liu
• [PATCH v2 3/6] spl: fit: Use map_sysmem() with buffers for fdt address   Nikita Shubin
• [PATCH v2 3/6] virtio: 9p: Add 9P transport driver   Simon Glass
• [PATCH v2 3/6] virtio: 9p: Add 9P transport driver   Kuan-Wei Chiu
• [PATCH v2 3/7] pci: pcie_dw_ti: fetch reset-gpios from the device-tree and use it   Siddharth Vadapalli
• [PATCH v2 3/7] pci: pcie_dw_ti: fetch reset-gpios from the device-tree and use it   neil.armstrong at linaro.org
• [PATCH v2 3/7] test: lib: Check the GPT layout for large sector sizes   Alexey Charkov
• [PATCH v2 3/7] tools: binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Jérémie Dautheribes (Schneider Electric)
• [PATCH v2 3/7] tools: mkimage: resolve image-data references between FIT images   Aristo Chen
• [PATCH v2 3/7] tools: mkimage: resolve image-data references between FIT images   Simon Glass
• [PATCH v2 3/7] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Stefan Eichenberger
• [PATCH v2 3/7] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Marek Vasut
• [PATCH v2 3/7] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Stefan Eichenberger
• [PATCH v2 3/7] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Marek Vasut
• [PATCH v2 3/8] board: nbxv3: add MPQ8785 PMBus core-rail readback   Vincent Jardin
• [PATCH v2 3/8] clk: spacemit: ccu_pll: add plla type clock   Yixun Lan
• [PATCH v2 3/9] clk: meson: a1: Use clk_set_rate from meson_mux_set_rate   Sean Anderson
• [PATCH v2 3/9] clk: qcom: add NEGCC driver for nord   Aswin Murugan
• [PATCH v2 4/4] arm: rp2350: Add driver for RP2350 hardware timers   Bhargav Das
• [PATCH v2 4/4] clk: qcom: Add Global Clock Controller (GCC) driver for MSM8917   Reza Kurniawan
• [PATCH v2 4/4] cmd: optee_rpmb: make it usable by scripts   Rasmus Villemoes
• [PATCH v2 4/4] configs: qcom: enable QMP USB3-DP combo PHY   David Heidelberg via B4 Relay
• [PATCH v2 4/4] doc: board: qualcomm: document Arduino VENTUNO Q   Tyler Baker
• [PATCH v2 4/4] mach-snapdragon: rescan only newly added SCSI devices for capsule update   Aswin Murugan
• [PATCH v2 4/4] MAINTAINER: add K1 PCIe driver to Spacemit entry   Eric Chung
• [PATCH v2 4/4] mtd: spi-nor: move fixups to manufacturer drivers   Takahiro Kuwano via B4 Relay
• [PATCH v2 4/4] spl: fit: use constants for FIT property names   Aristo Chen
• [PATCH v2 4/4] spl: fit: use constants for FIT property names   Simon Glass
• [PATCH v2 4/4] test: dm: check the regulators claim their GPIOs at probe time   Mehmet Fide
• [PATCH v2 4/4] tools: qcom: mkmbn: Add support to create multi-elf   Varadarajan Narayanan
• [PATCH v2 4/4] tools: qcom: mkmbn: Add support to create multi-elf   Balaji Selvanathan
• [PATCH v2 4/5] lx2160a: add SerDes 1 mode: 1x100GE + 4x10G (mix)   Vincent Jardin
• [PATCH v2 4/5] test/py: add 2.2-2.4 ECPT tests   Vincent Stehlé
• [PATCH v2 4/6] configs: arbel_evb: enable additional commands and drivers   Jim Liu
• [PATCH v2 4/6] doc: 9p: Add 9P filesystem documentation   Simon Glass
• [PATCH v2 4/6] test: spl: Zero spl_image_info   Nikita Shubin
• [PATCH v2 4/7] board: ti: am65x: evm: add support for SPL to update U-Boot device-tree   Siddharth Vadapalli
• [PATCH v2 4/7] imx93-u-boot: wrap SPL and U-Boot nodes in a CST node if AHAB_BOOT enabled   Jérémie Dautheribes (Schneider Electric)
• [PATCH v2 4/7] test: lib: Check the GPT round trip against a real block device   Alexey Charkov
• [PATCH v2 4/7] tools: mkimage: share the external-data region between image-data images   Aristo Chen
• [PATCH v2 4/7] usb: skip host-only devices when picking the ehci gadget controller   Stefan Eichenberger
• [PATCH v2 4/7] usb: skip host-only devices when picking the ehci gadget controller   Marek Vasut
• [PATCH v2 4/7] usb: skip host-only devices when picking the ehci gadget controller   Stefan Eichenberger
• [PATCH v2 4/7] usb: skip host-only devices when picking the ehci gadget controller   Marek Vasut
• [PATCH v2 4/7] usb: skip host-only devices when picking the ehci gadget controller   Stefan Eichenberger
• [PATCH v2 4/7] usb: skip host-only devices when picking the ehci gadget controller   Marek Vasut
• [PATCH v2 4/8] ARM: renesas: RZ/N1 QSPI controller features   Ralph Siemsen
• [PATCH v2 4/8] ARM: renesas: RZ/N1 QSPI controller features   Marek Vasut
• [PATCH v2 4/8] board: nbxv3: add boot-time PMBus PSU traces   Vincent Jardin
• [PATCH v2 4/8] clk: spacemit: k3: extract common header   Yixun Lan
• [PATCH v2 4/9] clk: meson: Use soc-specific naming for common functions   Sean Anderson
• [PATCH v2 4/9] clk: qcom: add SEGCC driver for nord   Aswin Murugan
• [PATCH v2 5/5] doc: lx2160a: SerDes 1 runtime lane grouping   Vincent Jardin
• [PATCH v2 5/5] doc: uefi: EBBR conformance profiles   Vincent Stehlé
• [PATCH v2 5/5] mmc: Make "MMC Device not found" a debug output   Ilias Apalodimas
• [PATCH v2 5/5] mmc: Make "MMC Device not found" a debug output   Kathpalia, Tanmay
• [PATCH v2 5/6] configs: arbel: add network timeout and watchdog stop env settings   Jim Liu
• [PATCH v2 5/6] spl: fit: Record loadables to spl_image->fdt_addr   Nikita Shubin
• [PATCH v2 5/6] test: 9p: Add test for 9P filesystem   Simon Glass
• [PATCH v2 5/6] test: 9p: Add test for 9P filesystem   Tom Rini
• [PATCH v2 5/6] test: 9p: Add test for 9P filesystem   Kuan-Wei Chiu
• [PATCH v2 5/7] arm: dts: k3-am65x-binman: package overlay for PCI-USB2 daughtercard   Siddharth Vadapalli
• [PATCH v2 5/7] configs: malta64: Enable EFI_PARTITION and BLKMAP for big-endian tests   Alexey Charkov
• [PATCH v2 5/7] configs: verdin-imx95: enable CI_UDC usb gadget driver   Stefan Eichenberger
• [PATCH v2 5/7] doc: imx: ahab: add AHAB introduction   Jérémie Dautheribes (Schneider Electric)
• [PATCH v2 5/7] tools: mkimage: include image-data sharers in the load overlap check   Aristo Chen
• [PATCH v2 5/8] board: nbxv3: add VID-fuse driven core voltage   Vincent Jardin
• [PATCH v2 5/8] clk: spacemit: k3: add the clock tree   Yixun Lan
• [PATCH v2 5/9] clk: meson: Export a1 functions to common file   Sean Anderson
• [PATCH v2 5/9] clk: qcom: add NWGCC driver for nord   Aswin Murugan
• [PATCH v2 6/6] ARM: dts: NPCM: modify ethernet delay time Modify npcm8xx ethernet reset delay time.   Jim Liu
• [PATCH v2 6/6] spl: fit: Add test to check loadables   Nikita Shubin
• [PATCH v2 6/7] arm: dts: k3-am654: add bootph-all to gpio at 38 for daughtercard detection   Siddharth Vadapalli
• [PATCH v2 6/7] doc: fit: document shared image data through the image-data property   Aristo Chen
• [PATCH v2 6/7] doc: fit: document shared image data through the image-data property   Simon Glass
• [PATCH v2 6/7] doc: imx: ahab: add i.MX93 secure boot guide   Jérémie Dautheribes (Schneider Electric)
• [PATCH v2 6/7] test: py: gpt: Bind the disk image in test_gpt_write_part_type()   Alexey Charkov
• [PATCH v2 6/7] toradex: verdin-imx95: enable DWC3 USB controller support   Stefan Eichenberger
• [PATCH v2 6/8] board: nbxv3: select carrier at boot   Vincent Jardin
• [PATCH v2 6/8] clk: spacemit: k3: add CPU PLL rate tables   Yixun Lan
• [PATCH v2 6/9] clk: meson: Support fractional fixed-factor clocks   Sean Anderson
• [PATCH v2 6/9] clk: qcom: add TCSRCC driver for nord   Aswin Murugan
• [PATCH v2 7/7] binman: test: add code coverage for nxp_imx93cst etype   Jérémie Dautheribes (Schneider Electric)
• [PATCH v2 7/7] configs: am65x_evm_a53_defconfig: enable support for PCI-USB2 daughtercard   Siddharth Vadapalli
• [PATCH v2 7/7] test: py: add tests for the FIT image-data property   Aristo Chen
• [PATCH v2 7/7] test: py: add tests for the FIT image-data property   Simon Glass
• [PATCH v2 7/7] test: py: gpt: Test the GPT layout on a device with 4096-byte blocks   Alexey Charkov
• [PATCH v2 7/7] toradex: smarc-imx95: enable DWC3 USB controller support   Stefan Eichenberger
• [PATCH v2 7/8] board: nbxv3: add DPLL status (ZL30733, ZL30643)   Vincent Jardin
• [PATCH v2 7/8] reset: spacemit: Extract common K1 reset code   Yixun Lan
• [PATCH v2 7/9] clk: meson: Support power-of-two dividers   Sean Anderson
• [PATCH v2 7/9] configs: qcom_defconfig: enable nord clock drivers   Aswin Murugan
• [PATCH v2 8/8] board: nbxv3: enable +3V3_FAN rail fixed regulator   Vincent Jardin
• [PATCH v2 8/8] reset: spacemit: Add SpacemiT K3 reset driver   Yixun Lan
• [PATCH v2 8/9] clk: meson: Add s4 clock driver   Sean Anderson
• [PATCH v2 8/9] pinctrl: qcom: add TLMM driver for nord   Aswin Murugan
• [PATCH v2 9/9] meson: Add Khadas VIM1S support   Sean Anderson
• [PATCH v2 9/9] phy: qcom: snps-eusb2: add Nord compatible   Aswin Murugan
• [PATCH v2] airoha: add support for Airoha AN7583 SoC   Tom Rini
• [PATCH v2] airoha: add support for Airoha AN7583 SoC   Mikhail Kshevetskiy
• [PATCH v2] airoha: add support for Airoha AN7583 SoC   Tom Rini
• [PATCH v2] arm: dts: socfpga: Add Agilex5 E-Series 013B SoCDK variant   dinesh.maniyam at altera.com
• [PATCH v2] arm: dts: socfpga: Add MDK support with external GPIO expander   Chee, Tien Fong
• [PATCH v2] arm: dts: socfpga: Add MDK support with external GPIO expander   Yuslaimi, Alif Zakuan
• [PATCH v2] arm: mach-snapdragon: increase compat buffer size and warn on root compatible string truncation   Casey Connolly
• [PATCH v2] arm: mediatek: allow a board to carry the arm64 kernel image header   Aleksei Sviridkin
• [PATCH v2] arm: mediatek: allow a board to carry the arm64 kernel image header   David Lechner
• [PATCH v2] arm: mediatek: allow a board to carry the arm64 kernel image header   Aleksei Sviridkin
• [PATCH v2] arm: mediatek: allow a board to carry the arm64 kernel image header   David Lechner
• [PATCH v2] arm: mediatek: allow a board to carry the arm64 kernel image header   Aleksei Sviridkin
• [PATCH v2] arm: mediatek: allow a board to carry the arm64 kernel image header   David Lechner
• [PATCH v2] binman: imx9image: respect BINMAN_INDIRS for external files   Michael Walle
• [PATCH v2] binman: imx9image: respect BINMAN_INDIRS for external files   Michael Walle
• [PATCH v2] Clean up emails from non-existing domains   Michal Simek
• [PATCH v2] Clean up emails from non-existing domains   Tom Rini
• [PATCH v2] clk: mediatek: fix using clocks before relocation   David Lechner
• [PATCH v2] cmd: nand: add .part suffix to dump command and refactor parsing   Qianqiang Liu
• [PATCH v2] dfu: mtd: probe before get_mtd_device_nm()   Ralph Siemsen
• [PATCH v2] dfu: mtd: probe before get_mtd_device_nm()   Marek Vasut
• [PATCH v2] dfu: mtd: probe before get_mtd_device_nm()   Mattijs Korpershoek
• [PATCH v2] dhcpv6: support rapid commit dhcp6 option   Jerome Forissier
• [PATCH v2] dhcpv6: support rapid commit dhcp6 option   Yuxiao Zhang
• [PATCH v2] dhcpv6: support rapid commit dhcp6 option   Jerome Forissier
• [PATCH v2] dhcpv6: support rapid commit dhcp6 option   Jerome Forissier
• [PATCH v2] dm: pci: fix uninitialized fdt_pci_addr fall-through in pci_get_devfn   neil.armstrong at linaro.org
• [PATCH v2] dm: pci: fix uninitialized fdt_pci_addr fall-through in pci_get_devfn   Neil Armstrong
• [PATCH v2] fastboot: block: add 'oem set-block-target' command and runtime override   Vandhiadevan Karunamoorthy
• [PATCH v2] fastboot: block: add 'oem set-block-target' command and runtime override   Varadarajan Narayanan
• [PATCH v2] fastboot: block: add 'oem set-block-target' command and runtime override   Varadarajan Narayanan
• [PATCH v2] fix 32bit silent truncation of 64bit offset in mmc_get_env_addr()   Torsten Rupp via B4 Relay
• [PATCH v2] fw_env: use env-size property for nvmem layout device detection   Michael C. Pratt
• [PATCH v2] fw_env: use env-size property for nvmem layout device detection   Tom Rini
• [PATCH v2] include: configs: socfpga: Add environment variables for distro boot   Chee, Tien Fong
• [PATCH v2] iommu: Add RISC-V IOMMU driver   Anirudh Srinivasan
• [PATCH v2] lib: lmb: return -EFAULT for partial bank-boundary overlap   Balaji Selvanathan
• [PATCH v2] lib: lmb: return -EFAULT for partial bank-boundary overlap   Marek Vasut
• [PATCH v2] mach-zynq: SPL Boot from QSPI in memory-mapped mode   Mike Looijmans
• [PATCH v2] mach-zynq: SPL Boot from QSPI in memory-mapped mode   Michal Simek
• [PATCH v2] mach-zynq: SPL Boot from QSPI in memory-mapped mode   Mike Looijmans
• [PATCH v2] MAINTAINERS: Make RISC-V entry cover all paths containing the keyword   Yao Zi
• [PATCH v2] MAINTAINERS: Make RISC-V entry cover all paths containing the keyword   Tom Rini
• [PATCH v2] MAINTAINERS: Make RISC-V entry cover all paths containing the keyword   Leo Liang
• [PATCH v2] misc: qcom_geni: fix RX_RFR_WATERMARK to use RX FIFO depth, not width   Vandhiadevan Karunamoorthy
• [PATCH v2] mmc: Add missing MMC_HS400_ES_SUPPORT to mmc_set_card_speed   baozhu.liu
• [PATCH v2] mmc: Add missing MMC_HS400_ES_SUPPORT to mmc_set_card_speed   baozhu.liu
• [PATCH v2] mmc: Add missing MMC_HS400_ES_SUPPORT to mmc_set_card_speed   Kathpalia, Tanmay
• [PATCH v2] mmc: Add missing MMC_HS400_ES_SUPPORT to mmc_set_card_speed   Kathpalia, Tanmay
• [PATCH v2] mmc: add option to skip eMMC deinit on OS handoff   Peng Fan
• [PATCH v2] mmc: add option to skip eMMC deinit on OS handoff   Peng Fan
• [PATCH v2] mmc: add option to skip eMMC deinit on OS handoff   Kathpalia, Tanmay
• [PATCH v2] mmc: add option to skip eMMC deinit on OS handoff   박민우 (MW Park)
• [PATCH v2] mmc: cv1800b_sdhci: configure SDHCI PHY   Andrei Lalaev
• [PATCH v2] mmc: cv1800b_sdhci: configure SDHCI PHY   Hiago De Franco
• [PATCH v2] mmc: cv1800b_sdhci: configure SDHCI PHY   Andrei Lalaev
• [PATCH v2] mtd: nand: add Cadence/Evatronix NAND flash driver   Marek Vasut
• [PATCH v2] net: dhcp6 use link local address   Yuxiao Zhang
• [PATCH v2] net: lwip: support syslog   Jerome Forissier
• [PATCH v2] net: lwip: support syslog   Jerome Forissier
• [PATCH v2] net: net6: validate IPv6 payload and transport lengths on receive   Jerome Forissier
• [PATCH v2] net: net6: validate IPv6 payload and transport lengths on receive   Jerome Forissier
• [PATCH v2] net: sandbox: support raw Ethernet with lwIP   James Hilliard
• [PATCH v2] net: sandbox: support raw Ethernet with lwIP   Jerome Forissier
• [PATCH v2] net: sandbox: support raw Ethernet with lwIP   Jerome Forissier
• [PATCH v2] pwm: add MediaTek display PWM driver   David Lechner
• [PATCH v2] pwm: add MediaTek display PWM driver   David Lechner
• [PATCH v2] regulator: qcom-rpmh-regulator: add support for PM8998   Dzmitry Sankouski
• [PATCH v2] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Vandhiadevan Karunamoorthy
• [PATCH v2] test: lib/uuid: Fix endianness for dynamic GUIDs   Tom Rini
• [PATCH v2] tools: rkcommon: compare the v2 header magic as little-endian   Piotr Kubaj
• [PATCH v2] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Stefan Eichenberger
• [PATCH v2] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Marek Vasut
• [PATCH v2] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Stefan Eichenberger
• [PATCH v2] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Marek Vasut
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Marek Vasut
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Patrice CHOTARD
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Marek Vasut
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Patrice CHOTARD
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Marek Vasut
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Patrice CHOTARD
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Marek Vasut
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Patrice CHOTARD
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Patrice CHOTARD
• [PATCH v2] usb: gadget: f_mass_storage: Optimize CTRL-C responsiveness   Patrice Chotard
• [PATCH v2] video: panel-startek-kd070fhfid078: new driver   Julien Stephan
• [PATCH v2] video: panel-startek-kd070fhfid078: new driver   David Lechner
• [PATCH v2] video: panel: Support for startek-kd070fhfid015 MIPI-DSI panel   David Lechner
• [PATCH v3 0/1] arm: dts: socfpga: Add MDK support with external GPIO expander   alif.zakuan.yuslaimi at altera.com
• [PATCH v3 0/2] riscv: timer: Fix M-mode early timer support   Nikita Shubin
• [PATCH v3 0/2] Support board-selected raw partitions   Carlo Caione
• [PATCH v3 0/2] tools: mkimage: add SpacemiT K3 boot image support   Junhui Liu
• [PATCH v3 0/2] tools: mkimage: add SpacemiT K3 boot image support   Yao Zi
• [PATCH v3 0/2] tools: mkimage: add SpacemiT K3 boot image support   Yixun Lan
• [PATCH v3 0/2] usb: gadget: add SuperSpeed descriptor support   Thinh Nguyen
• [PATCH v3 0/2] usb: gadget: add SuperSpeed descriptor support   Mattijs Korpershoek
• [PATCH v3 0/3] A-core no-SPL Boot Support   Bryan Brattlof
• [PATCH v3 0/3] A-core no-SPL Boot Support   Gokul Praveen
• [PATCH v3 0/3] A-core no-SPL Boot Support   Bryan Brattlof
• [PATCH v3 0/3] A-core no-SPL Boot Support   Gokul Praveen
• [PATCH v3 0/3] Add preliminary support for MSM8917   Reza Kurniawan
• [PATCH v3 0/3] Enable U-Boot SPL support for Lemans EVK   Balaji Selvanathan
• [PATCH v3 0/3] net: nfs: bound server-supplied lengths in READ and READLINK replies   Jerome Forissier
• [PATCH v3 0/4] Add Genio 510 and 700 BootROM download agents   Carlo Caione
• [PATCH v3 0/4] Add Genio 510 and 700 BootROM download agents   Quentin Schulz
• [PATCH v3 0/4] Add Genio 510 and 700 BootROM download agents   Carlo Caione
• [PATCH v3 0/4] tools: qcom: mkmbn: Updates to support ipq5210   Varadarajan Narayanan
• [PATCH v3 0/5] Add support for RPMI to U-Boot   Charles Perry
• [PATCH v3 0/5] board: lx2160a: runtime SerDes 1 lane grouping for LX2160A boards   Vincent Jardin
• [PATCH v3 0/5] cmd: optee_rpmb: make it usable by scripts   Rasmus Villemoes
• [PATCH v3 0/5] firmware-owned devicetree for EBBR / SystemReady DeviceTree   Carlo Caione
• [PATCH v3 0/5] firmware-owned devicetree for EBBR / SystemReady DeviceTree   Carlo Caione
• [PATCH v3 0/5] firmware-owned devicetree for EBBR / SystemReady DeviceTree   Simon Glass
• Re: [PATCH v3 0/5] firmware-owned devicetree for EBBR / SystemReady DeviceTree   Heinrich Schuchardt
• Re: [PATCH v3 0/5] firmware-owned devicetree for EBBR / SystemReady DeviceTree   Heinrich Schuchardt
• [PATCH v3 0/5] optee: Add support for enumerating RPMB-dependent services   Jan Kiszka
• [PATCH v3 0/6] fs: Add 9P filesystem support over virtio   Kuan-Wei Chiu
• [PATCH v3 0/7] binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Jérémie Dautheribes (Schneider Electric)
• [PATCH v3 0/7] Cleanup MAINTAINERS entries   Tom Rini
• [PATCH v3 0/7] Cleanup MAINTAINERS entries   Tom Rini
• [PATCH v3 0/7] qcom: qcs8300/monaco-evk: pinctrl, interconnect, RPMH clock and reboot-mode support   Balaji Selvanathan
• [PATCH v3 00/12] qcom: shikra: add eMMC SPL boot support   Abhilash V
• [PATCH v3 00/14] mediatek: add HDMI pipeline support for MT8188 based boards   Julien Stephan
• [PATCH v3 01/12] arm: qcom: add common QCLIB SPL extension helpers   Abhilash V
• [PATCH v3 01/14] video: mediatek: add display pipeline component helpers   Julien Stephan
• [PATCH v3 02/12] pinctrl: qcom: add Shikra SPL pinctrl option   Abhilash V
• [PATCH v3 02/14] video: mediatek: add ethdr component   Julien Stephan
• [PATCH v3 03/12] board: qualcomm: shikra: add SPL board support   Abhilash V
• [PATCH v3 03/14] video: mediatek: add merge component   Julien Stephan
• [PATCH v3 04/12] clk: qcom: add configurable FSM-voted PLL helper   Abhilash V
• [PATCH v3 04/14] video: mediatek: add mutex component   Julien Stephan
• [PATCH v3 05/12] arm: dts: shikra: retain QUP SPL dependencies   Abhilash V
• [PATCH v3 05/14] video: mediatek: add padding component   Julien Stephan
• [PATCH v3 06/12] clk: qcom: configure Shikra GPLL6 for SDCC1   Abhilash V
• [PATCH v3 06/14] video: mediatek: add rdma component   Julien Stephan
• [PATCH v3 07/12] clk: qcom: enable Shikra QUP wrapper clocks   Abhilash V
• [PATCH v3 07/14] video: mediatek: add smi larb driver   Julien Stephan
• [PATCH v3 08/12] mmc: msm_sdhci: make tuning callbacks optional   Abhilash V
• [PATCH v3 08/13] configs: qcom: enable PHY_QCOM_QMP_USB3_LEGACY   Casey Connolly
• [PATCH v3 08/14] video: mediatek: add dpi1 component   Julien Stephan
• [PATCH v3 09/12] arm: qcom: enable MMU and cache setup for Shikra SPL   Abhilash V
• [PATCH v3 09/13] arm64: dts: shikra: enable USB QMP PHY   Casey Connolly
• [PATCH v3 09/14] asm-generic: unaligned: add get_unaligned_le24()   Julien Stephan
• [PATCH v3 1/1] Add dedicated device tree and configuration support for Agilex5 Modular DevKit which uses an external GPIO expander for 1.8V signaling control instead of the onboard GPIO used in the Premium DevKit variant.   alif.zakuan.yuslaimi at altera.com
• [PATCH v3 1/2] riscv: timer: Make RISCV_TIMER definitions weak   Nikita Shubin
• [PATCH v3 1/2] spl: mmc: select the boot partition after device initialization   Carlo Caione
• [PATCH v3 1/2] spl: mmc: select the boot partition after device initialization   Tom Rini
• [PATCH v3 1/2] spl: mmc: select the boot partition after device initialization   Carlo Caione
• [PATCH v3 1/2] spl: mmc: select the boot partition after device initialization   Tom Rini
• [PATCH v3 1/2] spl: mmc: select the boot partition after device initialization   Carlo Caione
• [PATCH v3 1/2] spl: mmc: select the boot partition after device initialization   Tom Rini
• [PATCH v3 1/2] tools: mkimage: add SpacemiT K3 boot image support   Junhui Liu
• [PATCH v3 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support   Thinh Nguyen
• [PATCH v3 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support   Marek Vasut
• [PATCH v3 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support   Thinh Nguyen
• [PATCH v3 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support   Marek Vasut
• [PATCH v3 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support   Mattijs Korpershoek
• [PATCH v3 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support   Mattijs Korpershoek
• [PATCH v3 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support   Marek Vasut
• [PATCH v3 1/3] arm: dts: lemans-evk: enable SPL support for UFS and dependencies   Balaji Selvanathan
• [PATCH v3 1/3] configs: add A-core no-SPL mode fragment for k3 devices   Andrew Davis
• [PATCH v3 1/3] mach-snapdragon: Carve out reserved memory at init for MSM8917   Reza Kurniawan
• [PATCH v3 1/4] arm: mediatek: simplify SPL boot-device selection   Carlo Caione
• [PATCH v3 1/4] tools: qcom: mkmbn: Fix ipq5424 MBN version   Varadarajan Narayanan
• [PATCH v3 1/5] board: lx2160a: lx2160_serdes to lx2160_sd1 and lx2160_serdes   Vincent Jardin
• [PATCH v3 1/5] board: lx2160a: lx2160_serdes to lx2160_sd1 and lx2160_serdes   Vladimir Oltean
• [PATCH v3 1/5] cmd: optee_rpmb: sanitize TEE_ERROR -> E* translations   Rasmus Villemoes
• [PATCH v3 1/5] efi_loader: bootmgr: preserve a passed devicetree   Carlo Caione
• [PATCH v3 1/5] efi_loader: bootmgr: preserve a passed devicetree   Heinrich Schuchardt
• [PATCH v3 1/5] efi_loader: bootmgr: preserve a passed devicetree   Carlo Caione
• [PATCH v3 1/5] efi_loader: bootmgr: preserve a passed devicetree   E Shattow
• [PATCH v3 1/5] efi_loader: bootmgr: preserve a passed devicetree   Heinrich Schuchardt
• [PATCH v3 1/5] firmware: rpmi: add support for the SBI MPXY transport   Charles Perry
• [PATCH v3 1/5] tee: optee: Factor out service enumeration and binding functions   Jan Kiszka
• [PATCH v3 1/5] tee: optee: Factor out service enumeration and binding functions   Ilias Apalodimas
• [PATCH v3 1/6] net: 9p: Add 9P2000.L protocol support   Kuan-Wei Chiu
• [PATCH v3 1/7] binman: add nxp_imxcst base etype for i.MX CST signing   Jérémie Dautheribes (Schneider Electric)
• [PATCH v3 1/7] binman: add nxp_imxcst base etype for i.MX CST signing   Simon Glass
• [PATCH v3 1/7] clk: qcom: Add shared RPMH clock driver for SM8550/SM8650/SA8775P   Balaji Selvanathan
• [PATCH v3 1/7] scripts: Check F: entries in all MAINTAINERS files   Tom Rini
• [PATCH v3 10/12] board: qualcomm: shikra: prepare QUP firmware in SPL   Abhilash V
• [PATCH v3 10/14] include: linux/hdmi.h: add HDMI colorspace and colorimetry enums   Julien Stephan
• [PATCH v3 11/12] configs: qcom: add Shikra SPL defconfig   Abhilash V
• [PATCH v3 11/13] configs: add shikra defconfig for IQS & CQS boards   Casey Connolly
• [PATCH v3 11/14] video: mediatek: add new hdmi driver   Julien Stephan
• [PATCH v3 12/12] board: qualcomm: shikra: embed XBL-sec in SPL ELF   Abhilash V
• [PATCH v3 12/14] arm: dts: mt8390: add framebuffer reserved-memory   Julien Stephan
• [PATCH v3 13/14] arm: dts: mt8390: add hdmi override node   Julien Stephan
• [PATCH v3 14/14] configs: mediatek: mt8188: enable hdmi pipeline   Julien Stephan
• [PATCH v3 2/2] BeaglePlay: enable IT66121 HDMI bridge and video stack   Bryan Brattlof
• [PATCH v3 2/2] doc: board: spacemit: document the SpacemiT boot image format   Junhui Liu
• [PATCH v3 2/2] riscv: timer: Enable early timer for M‑mode   Nikita Shubin
• [PATCH v3 2/2] spl: mmc: make raw partition selection a choice   Carlo Caione
• [PATCH v3 2/2] spl: mmc: make raw partition selection a choice   Tom Rini
• [PATCH v3 2/2] usb: gadget: dfu: add SuperSpeed descriptor support   Thinh Nguyen
• [PATCH v3 2/2] usb: gadget: dfu: add SuperSpeed descriptor support   Mattijs Korpershoek
• [PATCH v3 2/3] board: qualcomm: lemans: add SPL support   Balaji Selvanathan
• [PATCH v3 2/3] clk: qcom: Add Global Clock Controller (GCC) driver for MSM8917   Reza Kurniawan
• [PATCH v3 2/4] arm: mediatek: enable SPL fastboot DAs on Genio 510 and 700   Carlo Caione
• [PATCH v3 2/4] configs: add qcom_sm8550_defconfig and debug fragment   Varadarajan Narayanan
• [PATCH v3 2/5] board: lx2160a: convert SD1 2x100GE to 2x40GE at runtime   Vincent Jardin
• [PATCH v3 2/5] boot: add a firmware-owned devicetree source   Carlo Caione
• [PATCH v3 2/5] boot: add a firmware-owned devicetree source   Simon Glass
• [PATCH v3 2/5] firmware: rpmi: add support for shared memory transport   Charles Perry
• [PATCH v3 2/5] optee_ta_avb.h: add TA_AVB_CMD_READ_PERSIST_VALUE2 define   Rasmus Villemoes
• [PATCH v3 2/5] tee: optee: Add support for enumerating services that only need RPMB   Jan Kiszka
• [PATCH v3 2/6] fs: 9p: Add 9P filesystem support   Kuan-Wei Chiu
• [PATCH v3 2/7] binman: nxp_imx8mcst: use the nxp_imxcst base etype   Jérémie Dautheribes (Schneider Electric)
• [PATCH v3 2/7] binman: nxp_imx8mcst: use the nxp_imxcst base etype   Simon Glass
• [PATCH v3 2/7] clk: qcom: qcs8300: Extend GCC clock driver to full gate/RCG coverage   Balaji Selvanathan
• [PATCH v3 2/7] MAINTAINERS: tegra: Update and correct entries   Tom Rini
• [PATCH v3 2/7] MAINTAINERS: tegra: Update and correct entries   Svyatoslav Ryhel
• [PATCH v3 3/3] configs: qcom: Add qcom_lemans_spl_defconfig for Lemans EVK   Balaji Selvanathan
• [PATCH v3 3/3] doc: ti: document A Core no-SPL boot mode for J784S4 EVM   Bryan Brattlof
• [PATCH v3 3/3] doc: ti: document A Core no-SPL boot mode for J784S4 EVM   Gokul Praveen
• [PATCH v3 3/3] pinctrl: qcom: Add pinctrl driver for MSM8917   Reza Kurniawan
• [PATCH v3 3/4] arm: mediatek: enable U-Boot fastboot DAs on Genio 510 and 700   Carlo Caione
• [PATCH v3 3/4] tools: qcom: mkmbn: Add support for ipq5210   Varadarajan Narayanan
• [PATCH v3 3/5] board: lx2160a: split SD1's second 40GE port into 4x 10G   Vincent Jardin
• [PATCH v3 3/5] board: lx2160a: split SD1's second 40GE port into 4x 10G   Vladimir Oltean
• [PATCH v3 3/5] bootmeth: efi: use the firmware-owned devicetree   Carlo Caione
• [PATCH v3 3/5] bootmeth: efi: use the firmware-owned devicetree   Simon Glass
• [PATCH v3 3/5] drivers: clk: add support for RPMI clocks   Charles Perry
• [PATCH v3 3/5] tee: optee: Do not warn about TEE_ERROR_STORAGE_NOT_AVAILABLE   Jan Kiszka
• [PATCH v3 3/5] tee: sandbox: support new TA_AVB_CMD_READ_PERSIST_VALUE2   Rasmus Villemoes
• [PATCH v3 3/6] virtio: 9p: Add 9P transport driver   Kuan-Wei Chiu
• [PATCH v3 3/6] virtio: 9p: Add 9P transport driver   Simon Glass
• [PATCH v3 3/7] binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Jérémie Dautheribes (Schneider Electric)
• [PATCH v3 3/7] binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Simon Glass
• [PATCH v3 3/7] MAINTAINERS: rockchip: Use N for rk3576-nanopi-r76s   Tom Rini
• [PATCH v3 3/7] pinctrl: qcom: Add QCS8300 pinctrl driver   Balaji Selvanathan
• [PATCH v3 4/4] doc: board: mediatek: document Genio download agents   Carlo Caione
• [PATCH v3 4/4] tools: qcom: mkmbn: Add support to create multi-elf   Varadarajan Narayanan
• [PATCH v3 4/5] cmd: optee_rpmb: allocate large enough buffer when reading persistent value   Rasmus Villemoes
• [PATCH v3 4/5] efi_loader: bootmgr: install the firmware-owned devicetree   Carlo Caione
• [PATCH v3 4/5] efi_loader: bootmgr: install the firmware-owned devicetree   Ilias Apalodimas
• [PATCH v3 4/5] efi_loader: bootmgr: install the firmware-owned devicetree   Carlo Caione
• [PATCH v3 4/5] efi_loader: bootmgr: install the firmware-owned devicetree   Ilias Apalodimas
• [PATCH v3 4/5] efi_loader: bootmgr: install the firmware-owned devicetree   Carlo Caione
• [PATCH v3 4/5] efi_loader: bootmgr: install the firmware-owned devicetree   Simon Glass
• [PATCH v3 4/5] firmware: rpmi: add a test and a sandbox driver   Charles Perry
• [PATCH v3 4/5] lx2160a: add SerDes 1 mode: 1x100GE + 4x10G (mix)   Vincent Jardin
• [PATCH v3 4/5] mmc: Call back to optee after a successful mmc_init   Jan Kiszka
• [PATCH v3 4/5] mmc: Call back to optee after a successful mmc_init   Ilias Apalodimas
• [PATCH v3 4/5] mmc: Call back to optee after a successful mmc_init   Jan Kiszka
• [PATCH v3 4/5] mmc: Call back to optee after a successful mmc_init   Ilias Apalodimas
• [PATCH v3 4/5] mmc: Call back to optee after a successful mmc_init   Jan Kiszka
• [PATCH v3 4/5] mmc: Call back to optee after a successful mmc_init   Jan Kiszka
• [PATCH v3 4/5] mmc: Call back to optee after a successful mmc_init   Jan Kiszka
• [PATCH v3 4/5] mmc: Call back to optee after a successful mmc_init   Ilias Apalodimas
• [PATCH v3 4/6] doc: 9p: Add 9P filesystem documentation   Kuan-Wei Chiu
• [PATCH v3 4/6] doc: 9p: Add 9P filesystem documentation   Simon Glass
• [PATCH v3 4/7] imx93-u-boot: wrap SPL and U-Boot nodes in a CST node if AHAB_BOOT enabled   Jérémie Dautheribes (Schneider Electric)
• [PATCH v3 4/7] interconnect: qcom: Add QCS8300 interconnect driver   Balaji Selvanathan
• [PATCH v3 4/7] MAINTAINERS: Fix "typo" and similar incorrect entries   Tom Rini
• [PATCH v3 4/7] riscv: milkv_duo: Use upstream devicetree   Zhuxu Ran
• [PATCH v3 4/7] riscv: milkv_duo: Use upstream devicetree   Andrei Lalaev
• [PATCH v3 5/5] cmd: optee_rpmb: make it usable by scripts   Rasmus Villemoes
• [PATCH v3 5/5] doc: lx2160a: SerDes 1 runtime lane grouping   Vincent Jardin
• [PATCH v3 5/5] doc: lx2160a: SerDes 1 runtime lane grouping   Vladimir Oltean
• [PATCH v3 5/5] drivers: firmware: rpmi: Add the mpxy command   Charles Perry
• [PATCH v3 5/5] mmc: Make "MMC Device not found" a debug output   Jan Kiszka
• [PATCH v3 5/5] mmc: Make "MMC Device not found" a debug output   Kathpalia, Tanmay
• [PATCH v3 5/5] mmc: Make "MMC Device not found" a debug output   Ilias Apalodimas
• [PATCH v3 5/5] test: boot: add firmware-FDT source tests   Carlo Caione
• [PATCH v3 5/5] test: boot: add firmware-FDT source tests   Simon Glass
• [PATCH v3 5/6] test: 9p: Add test for 9P filesystem   Kuan-Wei Chiu
• [PATCH v3 5/6] test: 9p: Add test for 9P filesystem   Simon Glass
• [PATCH v3 5/7] arm64: dts: monaco-evk: Add reboot-mode support via PON/SDAM   Balaji Selvanathan
• [PATCH v3 5/7] doc: imx: ahab: add AHAB introduction   Jérémie Dautheribes (Schneider Electric)
• [PATCH v3 5/7] doc: imx: ahab: add AHAB introduction   Simon Glass
• [PATCH v3 5/7] doc: imx: ahab: add AHAB introduction   Jérémie Dautheribes
• [PATCH v3 5/7] MAINTAINERS: Correct entries missed during renames   Tom Rini
• [PATCH v3 6/6] MAINTAINERS: Add entry for 9PFS   Kuan-Wei Chiu
• [PATCH v3 6/7] arm64: dts: monaco-evk: Force vreg_l8a always-on to protect UFS VCC   Balaji Selvanathan
• [PATCH v3 6/7] doc: imx: ahab: add i.MX93 secure boot guide   Jérémie Dautheribes (Schneider Electric)
• [PATCH v3 6/7] doc: imx: ahab: add i.MX93 secure boot guide   Simon Glass
• [PATCH v3 6/7] MAINTAINERS: Removed files   Tom Rini
• [PATCH v3 7/7] binman: test: add code coverage for nxp_imx93cst etype   Jérémie Dautheribes (Schneider Electric)
• [PATCH v3 7/7] binman: test: add code coverage for nxp_imx93cst etype   Simon Glass
• [PATCH v3 7/7] CI: Run scripts/check_maintainers_files.sh in the existing MAINTAINERS job   Tom Rini
• [PATCH v3 7/7] configs: qcom_qcs8300: Switch to monaco-evk DT and enable new drivers   Balaji Selvanathan
• [PATCH v3] binman: imx9image: respect BINMAN_INDIRS for external files   Michael Walle
• [PATCH v3] binman: imx9image: respect BINMAN_INDIRS for external files   Simon Glass
• [PATCH v3] disk: update partition type reporting   dmukhin at ford.com
• [PATCH v3] disk: update partition type reporting   Tom Rini
• [PATCH v3] fastboot: block: support interface-prefixed device/partition selection   Vandhiadevan Karunamoorthy
• [PATCH v3] mach-zynq: Support SPL boot from QSPI in memory-mapped mode   Mike Looijmans
• [PATCH v3] mach-zynq: Support SPL boot from QSPI in memory-mapped mode   Michal Simek
• [PATCH v3] mach-zynq: Support SPL boot from QSPI in memory-mapped mode   Mike Looijmans
• [PATCH v3] mach-zynq: Support SPL boot from QSPI in memory-mapped mode   Michal Simek
• [PATCH v3] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Jonas Karlman
• [PATCH v3] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Massimo Pegorer
• [PATCH v3] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Jonas Karlman
• [PATCH v3] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Quentin Schulz
• [PATCH v3] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Massimo Pegorer
• [PATCH v3] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Quentin Schulz
• [PATCH v3] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Massimo Pegorer
• [PATCH v3] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Quentin Schulz
• [PATCH v3] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Jonas Karlman
• [PATCH v3] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Jonas Karlman
• [PATCH v3] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Massimo Pegorer
• [PATCH v3] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Stefan Eichenberger
• [PATCH v3] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Marek Vasut
• [PATCH v3] video: panel-startek-kd070fhfid078: new driver   David Lechner
• [PATCH v3] video: panel-startek-kd070fhfid078: new driver   Julien Stephan
• [PATCH v3] x86: cpu: x86_64: Detect CPU vendor and device ID using cpuid   Desapogu, Jayaramudu
• [PATCH v4 0/2] riscv: timer: Fix M-mode early timer support   Nikita Shubin
• [PATCH v4 0/3] A-core no-SPL Boot Support   Gokul Praveen
• [PATCH v4 0/3] A-core no-SPL Boot Support   Gokul Praveen
• [PATCH v4 0/3] Enable U-Boot SPL support for Lemans EVK   Balaji Selvanathan
• [PATCH v4 0/4] arm: mediatek: Genio 360 EVK bringup   David Lechner
• [PATCH v4 0/4] fit: Harden handling of external-data properties   Anton Ivanov
• [PATCH v4 0/4] fit: Harden handling of external-data properties   Tom Rini
• [PATCH v4 0/5] Add fastboot to SPL   Carlo Caione
• [PATCH v4 0/5] Add fastboot to SPL   Carlo Caione
• [PATCH v4 0/5] Add fastboot to SPL   Mattijs Korpershoek
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Neha Malcom Francis
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Tom Rini
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Tom Rini
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Peter Robinson
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   neil.armstrong at linaro.org
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Ilias Apalodimas
• [PATCH v4 0/6] optee: Add support for enumerating RPMB-dependent services   Jan Kiszka
• [PATCH v4 0/6] optee: Add support for enumerating RPMB-dependent services   Jan Kiszka
• [PATCH v4 0/6] optee: Add support for enumerating RPMB-dependent services   Ilias Apalodimas
• [PATCH v4 0/9] binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Jérémie Dautheribes (Schneider Electric)
• [PATCH v4 00/10] board: lx2160a: runtime SD 1 lane configuration for LX2160A boards   Vincent Jardin
• [PATCH v4 00/10] board: lx2160a: runtime SD 1 lane configuration for LX2160A boards   Tom Rini
• [PATCH v4 00/10] board: lx2160a: runtime SD 1 lane configuration for LX2160A boards   Vincent Jardin
• [PATCH v4 00/10] board: lx2160a: runtime SD 1 lane configuration for LX2160A boards   Tom Rini
• [PATCH v4 00/11] arm: mach-k3: introduce basic support for the AM62L   Frieder Schrempf
• [PATCH v4 00/14] mediatek: add HDMI pipeline support for MT8188 based boards   Julien Stephan
• [PATCH v4 00/19] LoongArch initial support   Yao Zi
• [PATCH v4 00/22] arm64: FF-A runtime transport for EFI variables   Harsimran Singh Tungal
• [PATCH v4 00/22] arm64: FF-A runtime transport for EFI variables   Ilias Apalodimas
• [PATCH v4 01/10] board: lx2160a: serdes: drop the split subcommand   Vincent Jardin
• [PATCH v4 01/10] board: lx2160a: serdes: drop the split subcommand   Vladimir Oltean
• [PATCH v4 01/11] clk: sophgo: cv1800b: Add SoC-specific compatible strings   Zhuxu Ran
• [PATCH v4 01/14] video: mediatek: add display pipeline component helpers   Julien Stephan
• [PATCH v4 01/19] lib: fdtdec: Handle multiple memory nodes   Yao Zi
• [PATCH v4 02/10] board: lx2160a: serdes: rename serdes1:split to serdes1:100g4x25g   Vincent Jardin
• [PATCH v4 02/10] board: lx2160a: serdes: rename serdes1:split to serdes1:100g4x25g   Vladimir Oltean
• [PATCH v4 02/11] mmc: cv1800b: Add SG2002 compatible string   Zhuxu Ran
• [PATCH v4 02/14] video: mediatek: add ethdr component   Julien Stephan
• [PATCH v4 02/19] linux/io.h: Use map_physmem to implement ioremap   Yao Zi
• [PATCH v4 03/10] board: lx2160a: serdes: set SD1 with a table   Vincent Jardin
• [PATCH v4 03/10] board: lx2160a: serdes: set SD1 with a table   Vladimir Oltean
• [PATCH v4 03/11] dt-bindings: soc: sophgo: add Milk-V Duo 256M board   Zhuxu Ran
• [PATCH v4 03/14] video: mediatek: add merge component   Julien Stephan
• [PATCH v4 03/19] image: Take entry point as an output of setup_booti   Yao Zi
• [PATCH v4 04/10] board: lx2160a: serdes: report unknown SD1 cases   Vincent Jardin
• [PATCH v4 04/10] board: lx2160a: serdes: report unknown SD1 cases   Vladimir Oltean
• [PATCH v4 04/11] riscv: dts: sophgo: cv180x: Add PWR_GPIO controller   Zhuxu Ran
• [PATCH v4 04/14] video: mediatek: add mutex component   Julien Stephan
• [PATCH v4 04/19] elf: Define LoongArch bits   Yao Zi
• [PATCH v4 05/10] board: lx2160a: serdes: no SD1 config once MC runs   Vincent Jardin
• [PATCH v4 05/10] board: lx2160a: serdes: no SD1 config once MC runs   Vladimir Oltean
• [PATCH v4 05/11] riscv: dts: sophgo: Add Milk-V Duo 256M board support   Zhuxu Ran
• [PATCH v4 05/14] video: mediatek: add padding component   Julien Stephan
• [PATCH v4 05/19] image: Define IH_ARCH_LOONGARCH   Yao Zi
• [PATCH v4 06/10] board: lx2160a: serdes: add serdes1:2x40g   Vincent Jardin
• [PATCH v4 06/11] riscv: milkv_duo: Use upstream devicetree   Zhuxu Ran
• [PATCH v4 06/14] video: mediatek: add rdma component   Julien Stephan
• [PATCH v4 06/19] LoongArch: skeleton and headers   Yao Zi
• [PATCH v4 07/10] board: lx2160a: serdes: add serdes1:40g4x10g   Vincent Jardin
• [PATCH v4 07/11] riscv: licheerv_nano: Use upstream devicetree   Zhuxu Ran
• [PATCH v4 07/14] video: mediatek: add smi larb driver   Julien Stephan
• [PATCH v4 07/19] LoongArch: lib: General routines   Yao Zi
• [PATCH v4 08/10] board: lx2160a: serdes: add serdes1:100g4x10g   Vincent Jardin
• [PATCH v4 08/11] riscv: milkv_duo_256m: Use upstream devicetree   Zhuxu Ran
• [PATCH v4 08/11] riscv: milkv_duo_256m: Use upstream devicetree   Hiago De Franco
• [PATCH v4 08/11] riscv: milkv_duo_256m: Use upstream devicetree   Zhuxu Ran
• [PATCH v4 08/14] video: mediatek: add dpi1 component   Julien Stephan
• [PATCH v4 08/19] LoongArch: CPU assembly routines   Yao Zi
• [PATCH v4 09/10] doc: lx2160a: document the sd1 hwconfig option   Vincent Jardin
• [PATCH v4 09/10] doc: lx2160a: document the sd1 hwconfig option   Vladimir Oltean
• [PATCH v4 09/10] doc: lx2160a: document the sd1 hwconfig option   Vladimir Oltean
• [PATCH v4 09/10] doc: lx2160a: document the sd1 hwconfig option   Vincent Jardin
• [PATCH v4 09/11] rtc: cv1800: Add RTC and system reset support   Zhuxu Ran
• [PATCH v4 09/11] rtc: cv1800: Add RTC and system reset support   Yao Zi
• [PATCH v4 09/11] rtc: cv1800: Add RTC and system reset support   Zhuxu Ran
• [PATCH v4 09/14] asm-generic: unaligned: add get_unaligned_le24()   Julien Stephan
• [PATCH v4 09/19] LoongArch: Exception handling   Yao Zi
• [PATCH v4 1/2] riscv: timer: Make RISCV_TIMER definitions weak   Nikita Shubin
• [PATCH v4 1/2] spi: Introduce initial EEPROM driver mode support   João Loureiro
• [PATCH v4 1/3] arm: dts: lemans-evk: enable SPL support for UFS and dependencies   Balaji Selvanathan
• [PATCH v4 1/3] configs: add A-core no-SPL mode fragment for k3 devices   Gokul Praveen
• [PATCH v4 1/3] configs: add A-core no-SPL mode fragment for k3 devices   Anshul Dalal
• [PATCH v4 1/4] arm: dts: add MT8366 application processor   David Lechner
• [PATCH v4 1/4] image-fit: Use unsigned types for external data properties   Anton Ivanov
• [PATCH v4 1/5] ufs: decode string descriptors as UTF-16 big-endian   David Lechner
• [PATCH v4 1/5] ufs: decode string descriptors as UTF-16 big-endian   David Lechner
• [PATCH v4 1/6] tee: optee: Factor out service enumeration and binding functions   Jan Kiszka
• [PATCH v4 1/9] binman: add nxp_imxcst base etype for i.MX CST signing   Jérémie Dautheribes (Schneider Electric)
• [PATCH v4 10/10] board: nbxv3: apply sd1 hwconfig before MC starts   Vincent Jardin
• [PATCH v4 10/10] board: nbxv3: apply sd1 hwconfig before MC starts   Vladimir Oltean
• [PATCH v4 10/11] riscv: dts: sophgo: Drop local CV18xx devicetrees   Zhuxu Ran
• [PATCH v4 10/14] include: linux/hdmi.h: add HDMI colorspace and colorimetry enums   Julien Stephan
• [PATCH v4 10/19] LoongArch: Boot Image bits   Yao Zi
• [PATCH v4 11/11] clk: sophgo: cv1800b: Drop legacy compatible string   Zhuxu Ran
• [PATCH v4 11/14] video: mediatek: add new hdmi driver   Julien Stephan
• [PATCH v4 11/19] LoongArch: Generic platform type   Yao Zi
• [PATCH v4 12/14] arm: dts: mt8390: add framebuffer reserved-memory   Julien Stephan
• [PATCH v4 12/19] cpu: Add loongarch_cpu driver   Yao Zi
• [PATCH v4 13/14] arm: dts: mt8390: add hdmi override node   Julien Stephan
• [PATCH v4 13/19] timer: Add loongarch_timer driver   Yao Zi
• [PATCH v4 13/22] efi_loader: enable TEE runtime SetVariable() over FF-A   Harsimran Singh Tungal
• [PATCH v4 14/14] configs: mediatek: mt8188: enable hdmi pipeline   Julien Stephan
• [PATCH v4 14/19] board: emulation: Add qemu-loongarch   Yao Zi
• [PATCH v4 15/19] efi: LoongArch: Define LoongArch bits everywhere   Yao Zi
• [PATCH v4 16/19] efi: LoongArch: Implement everything   Yao Zi
• [PATCH v4 17/19] doc: arch: Add documentation for LoongArch   Yao Zi
• [PATCH v4 18/19] MAINTAINERS: Add entry for LoongArch   Yao Zi
• [PATCH v4 19/19] CI: Wire up qemu-loongarch64   Yao Zi
• [PATCH v4 2/2] riscv: timer: Enable early timer for M‑mode   Nikita Shubin
• [PATCH v4 2/2] riscv: timer: Enable early timer for M‑mode   Yao Zi
• [PATCH v4 2/2] riscv: timer: Enable early timer for M‑mode   Nikita Shubin
• [PATCH v4 2/2] riscv: timer: Enable early timer for M‑mode   Yao Zi
• [PATCH v4 2/2] riscv: timer: Enable early timer for M‑mode   Nikita Shubin
• [PATCH v4 2/3] arm: k3-binman: add tinospl.bin for direct U-Boot boot   Gokul Praveen
• [PATCH v4 2/3] arm: k3-binman: add tinospl.bin for direct U-Boot boot   Anshul Dalal
• [PATCH v4 2/3] board: qualcomm: lemans: add SPL support   Balaji Selvanathan
• [PATCH v4 2/4] arm: mediatek: add MT8366 application processor   David Lechner
• [PATCH v4 2/4] test: spl: Factor out external-data FIT property checks   Anton Ivanov
• [PATCH v4 2/5] ufs: add RPMB transport over SCSI SECURITY PROTOCOL   David Lechner
• [PATCH v4 2/6] tee: optee: Avoid binding a service twice   Jan Kiszka
• [PATCH v4 2/6] tee: optee: Avoid binding a service twice   Ilias Apalodimas
• [PATCH v4 2/9] binman: nxp_imx8mcst: use the nxp_imxcst base etype   Jérémie Dautheribes (Schneider Electric)
• [PATCH v4 3/3] configs: qcom: Add qcom_lemans_spl_defconfig for Lemans EVK   Balaji Selvanathan
• [PATCH v4 3/3] doc: ti: document A Core no-SPL boot mode for J784S4 EVM   Gokul Praveen
• [PATCH v4 3/3] doc: ti: document A Core no-SPL boot mode for J784S4 EVM   Anshul Dalal
• [PATCH v4 3/4] arm: dts: mediatek: add Genio 360 EVK   David Lechner
• [PATCH v4 3/4] spl: fit: Harden external-data offset and size arithmetic   Anton Ivanov
• [PATCH v4 3/6] tee: optee: Add support for enumerating services that only need RPMB   Jan Kiszka
• [PATCH v4 3/6] tee: optee: Add support for enumerating services that only need RPMB   Ilias Apalodimas
• [PATCH v4 3/6] tee: optee: Add support for enumerating services that only need RPMB   Jan Kiszka
• [PATCH v4 3/6] tee: optee: Add support for enumerating services that only need RPMB   Ilias Apalodimas
• [PATCH v4 3/6] tee: optee: Add support for enumerating services that only need RPMB   Jan Kiszka
• [PATCH v4 3/6] tee: optee: Add support for enumerating services that only need RPMB   Ilias Apalodimas
• [PATCH v4 3/6] tee: optee: Add support for enumerating services that only need RPMB   Ilias Apalodimas
• [PATCH v4 3/6] tee: optee: Add support for enumerating services that only need RPMB   Jan Kiszka
• [PATCH v4 3/6] tee: optee: Add support for enumerating services that only need RPMB   Ilias Apalodimas
• [PATCH v4 3/9] binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Jérémie Dautheribes (Schneider Electric)
• [PATCH v4 4/4] board: mediatek: add Genio 360 EVK defconfig   David Lechner
• [PATCH v4 4/4] spl: fit: Bound external data like U-Boot proper   Anton Ivanov
• [PATCH v4 4/5] optee: rename rpmb.c to rpmb_emmc.c   Ilias Apalodimas
• [PATCH v4 4/6] tee: optee: Do not warn about TEE_ERROR_STORAGE_NOT_AVAILABLE   Jan Kiszka
• [PATCH v4 4/9] imx93-u-boot: wrap SPL and U-Boot nodes in a CST node if AHAB_BOOT enabled   Jérémie Dautheribes (Schneider Electric)
• [PATCH v4 5/5] optee: implement the RPMB subsystem interface for UFS   Ilias Apalodimas
• [PATCH v4 5/5] optee: implement the RPMB subsystem interface for UFS   Jorge Ramirez
• [PATCH v4 5/5] optee: implement the RPMB subsystem interface for UFS   Jorge Ramirez
• [PATCH v4 5/6] mmc: Call back to optee after a successful mmc_init   Jan Kiszka
• [PATCH v4 5/6] mmc: Call back to optee after a successful mmc_init   Ilias Apalodimas
• [PATCH v4 5/6] mmc: Call back to optee after a successful mmc_init   Jan Kiszka
• [PATCH v4 5/6] mmc: Call back to optee after a successful mmc_init   Ilias Apalodimas
• [PATCH v4 5/6] mmc: Call back to optee after a successful mmc_init   Ilias Apalodimas
• [PATCH v4 5/9] doc: imx: ahab: add AHAB introduction   Jérémie Dautheribes (Schneider Electric)
• [PATCH v4 6/6] mmc: Make "MMC Device not found" a debug output   Jan Kiszka
• [PATCH v4 6/6] mmc: Make "MMC Device not found" a debug output   Ilias Apalodimas
• [PATCH v4 6/9] doc: imx: ahab: add i.MX93 secure boot guide   Jérémie Dautheribes (Schneider Electric)
• [PATCH v4 7/9] binman: test: add a helper to mock the cst bintool run_cmd()   Jérémie Dautheribes (Schneider Electric)
• [PATCH v4 8/9] binman: test: use the cst mock helper in testNxpImx8mCSTSigned   Jérémie Dautheribes (Schneider Electric)
• [PATCH v4 9/9] binman: test: add code coverage for nxp_imx93cst etype   Jérémie Dautheribes (Schneider Electric)
• [PATCH v4] binman: imx9image: respect BINMAN_INDIRS for external files   Michael Walle
• [PATCH v4] mach-zynq: Support SPL boot from QSPI in memory-mapped mode   Mike Looijmans
• [PATCH v5 0/2] riscv: timer: Fix M-mode early timer support   Nikita Shubin
• [PATCH v5 0/2] riscv: timer: Fix M-mode early timer support   Yao Zi
• [PATCH v5 0/2] tpm: bounds-check device-reported response lengths   shj
• [PATCH v5 0/2] tpm: bounds-check device-reported response lengths   Ilias Apalodimas
• [PATCH v5 0/3] net: fsl_enetc: Add SGMII 1G for i.MX95   Fabio Estevam
• [PATCH v5 0/3] spi: Introduce driver-model support for SPI EEPROMs   João Loureiro
• [PATCH v5 0/3] spi: Introduce driver-model support for SPI EEPROMs   Simon Glass
• [PATCH v5 0/3] spi: Introduce driver-model support for SPI EEPROMs   Tom Rini
• [PATCH v5 0/4] arm: mediatek: Genio 360 EVK bringup   David Lechner
• [PATCH v5 0/5] Add fastboot to SPL   Carlo Caione
• [PATCH v5 0/6] Add Genio 510 and Genio 700 SPL boot support   Carlo Caione
• [PATCH v5 0/6] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez-Ortiz
• [PATCH v5 0/6] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v5 0/6] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Macpaul Lin (林智斌)
• [PATCH v5 0/6] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Ilias Apalodimas
• [PATCH v5 0/6] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v5 0/6] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v5 0/6] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jens Wiklander
• [PATCH v5 0/6] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Ilias Apalodimas
• [PATCH v5 0/6] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Macpaul Lin (林智斌)
• [PATCH v5 00/10] riscv: sophgo: Use upstream devicetrees for CV18xx boards   Zhuxu Ran
• [PATCH v5 00/10] riscv: sophgo: Use upstream devicetrees for CV18xx boards   Yao Zi
• [PATCH v5 00/10] riscv: sophgo: Use upstream devicetrees for CV18xx boards   Hiago De Franco
• [PATCH v5 00/13] board: lx2160a: runtime SD 1 lane configuration for LX2160A boards   Vincent Jardin
• [PATCH v5 00/13] mediatek: add HDMI pipeline support for MT8188 based boards   Julien Stephan
• [PATCH v5 00/21] Introduce resume for J7xx SoCs   Kumar, Udit
• [PATCH v5 00/22] arm64: FF-A runtime transport for EFI variables   Harsimran Singh Tungal
• [PATCH v5 01/10] clk: sophgo: cv1800b: Add SoC-specific compatible strings   Zhuxu Ran
• [PATCH v5 01/13] board: lx2160a: serdes: drop the split subcommand   Vincent Jardin
• [PATCH v5 01/13] memory: sort the Makefile alphabetically   Julien Stephan
• [PATCH v5 01/22] efi_loader: add runtime memset helper   Harsimran Singh Tungal
• [PATCH v5 02/10] mmc: cv1800b: Add SG2002 compatible string   Zhuxu Ran
• [PATCH v5 02/13] board: lx2160a: serdes: rename serdes1:split to serdes1:100g4x25g   Vincent Jardin
• [PATCH v5 02/13] memory: mediatek: add SMI larb driver   Julien Stephan
• [PATCH v5 02/22] arm-ffa: store boot-discovered runtime data separately   Harsimran Singh Tungal
• [PATCH v5 03/10] dt-bindings: soc: sophgo: add Milk-V Duo 256M board   Zhuxu Ran
• [PATCH v5 03/13] board: lx2160a: serdes: rename SPLIT_POLL_US to SRDS_POLL_US   Vincent Jardin
• [PATCH v5 03/13] video: mediatek: add display pipeline component helpers   Julien Stephan
• Re: [PATCH v5 03/13] video: mediatek: add display pipeline component helpers   Heinrich Schuchardt
• [PATCH v5 03/22] arm-ffa: add runtime-safe FF-A SMC wrapper   Harsimran Singh Tungal
• [PATCH v5 04/10] riscv: dts: sophgo: cv180x: Add PWR_GPIO controller   Zhuxu Ran
• [PATCH v5 04/13] board: lx2160a: serdes: move the SD1 halt and reset into helpers   Vincent Jardin
• [PATCH v5 04/13] video: mediatek: add ethdr component   Julien Stephan
• [PATCH v5 04/13] video: mediatek: add ethdr component   Heinrich Schuchardt
• [PATCH v5 04/21] mach-k3: r5: common: add helper functions needed in LPM resume sequence   Kumar, Udit
• [PATCH v5 04/21] mach-k3: r5: common: add helper functions needed in LPM resume sequence   Richard GENOUD
• [PATCH v5 04/22] arm-ffa: add runtime direct-message support   Harsimran Singh Tungal
• [PATCH v5 05/10] riscv: dts: sophgo: Add Milk-V Duo 256M board support   Zhuxu Ran
• [PATCH v5 05/13] board: lx2160a: serdes: set SD1 with a table   Vincent Jardin
• [PATCH v5 05/13] video: mediatek: add merge component   Julien Stephan
• [PATCH v5 05/21] global: k3: use gd to store the resume state   Kumar, Udit
• [PATCH v5 05/22] arm-ffa: reuse direct-message helper at boot time   Harsimran Singh Tungal
• [PATCH v5 06/10] riscv: milkv_duo: Use upstream devicetree   Zhuxu Ran
• [PATCH v5 06/13] board: lx2160a: serdes: report unknown SD1 cases   Vincent Jardin
• [PATCH v5 06/13] video: mediatek: add mutex component   Julien Stephan
• [PATCH v5 06/21] mach-k3: r5: common: introduce j7xx_board_is_resuming()   Kumar, Udit
• [PATCH v5 06/22] arm-ffa: enable runtime context at ExitBootServices   Harsimran Singh Tungal
• [PATCH v5 07/10] riscv: licheerv_nano: Use upstream devicetree   Zhuxu Ran
• [PATCH v5 07/13] board: lx2160a: serdes: no SD1 config once MC runs   Vincent Jardin
• [PATCH v5 07/13] video: mediatek: add padding component   Julien Stephan
• [PATCH v5 07/21] mach-k3: r5: common: introduce k3_deassert_ddr_ret()   Kumar, Udit
• [PATCH v5 07/22] arm: cache: keep range maintenance available at EFI runtime   Harsimran Singh Tungal
• [PATCH v5 08/10] riscv: milkv_duo_256m: Use upstream devicetree   Zhuxu Ran
• [PATCH v5 08/13] board: lx2160a: serdes: add serdes1:2x40g   Vincent Jardin
• [PATCH v5 08/13] video: mediatek: add rdma component   Julien Stephan
• [PATCH v5 08/21] board: mach-k3: r5: common: enable GTC after core_resume   Kumar, Udit
• [PATCH v5 08/22] efi_loader: add MM SP status mapping for FF-A variables   Harsimran Singh Tungal
• [PATCH v5 08/22] efi_loader: add MM SP status mapping for FF-A variables   Ilias Apalodimas
• [PATCH v5 09/10] riscv: dts: sophgo: Drop local CV18xx devicetrees   Zhuxu Ran
• [PATCH v5 09/13] board: lx2160a: serdes: enter a SD1 mode through the mode it starts from   Vincent Jardin
• [PATCH v5 09/13] video: mediatek: add dpi1 component   Julien Stephan
• [PATCH v5 09/21] board: evm: Enable de-isolation of IOs at resume for j7200 and j784s4   Kumar, Udit
• [PATCH v5 09/22] efi_loader: make MM transport selection runtime-safe   Harsimran Singh Tungal
• [PATCH v5 1/2] riscv: timer: Make RISCV_TIMER definitions weak   Nikita Shubin
• [PATCH v5 1/3] test: dm: sf: Get the emulator attached to the flash slave   João Loureiro
• [PATCH v5 1/4] arm: dts: add MT8366 application processor   David Lechner
• [PATCH v5 1/5] fastboot: factor out the USB session runner   Carlo Caione
• [PATCH v5 1/5] fastboot: factor out the USB session runner   David Lechner
• [PATCH v5 1/5] fastboot: factor out the USB session runner   Mattijs Korpershoek
• [PATCH v5 1/5] fastboot: factor out the USB session runner   Carlo Caione
• [PATCH v5 1/5] fastboot: factor out the USB session runner   Mattijs Korpershoek
• [PATCH v5 1/6] ufs: decode string descriptors as UTF-16 big-endian   Jorge Ramirez-Ortiz
• [PATCH v5 10/10] clk: sophgo: cv1800b: Drop legacy compatible string   Zhuxu Ran
• [PATCH v5 10/13] asm-generic: unaligned: add get_unaligned_le24()   Julien Stephan
• [PATCH v5 10/13] asm-generic: unaligned: add get_unaligned_le24()   Ilias Apalodimas
• [PATCH v5 10/13] board: lx2160a: serdes: add serdes1:40g4x10g   Vincent Jardin
• [PATCH v5 10/21] board: mach-k3: r5: common: Store wakeup reason on scratchpad memory   Kumar, Udit
• [PATCH v5 10/22] efi_loader: make FF-A MM SP notification runtime-safe   Harsimran Singh Tungal
• [PATCH v5 11/13] board: lx2160a: serdes: add serdes1:100g4x10g   Vincent Jardin
• [PATCH v5 11/13] video: mediatek: add hdmi driver   Julien Stephan
• [PATCH v5 11/21] board: mach-k3: r5: common: Set PMIC NSLEEP triggers bits at resume   Kumar, Udit
• [PATCH v5 11/21] board: mach-k3: r5: common: Set PMIC NSLEEP triggers bits at resume   Thomas Richard
• [PATCH v5 11/22] efi_loader: make FF-A MM communication runtime-safe   Harsimran Singh Tungal
• [PATCH v5 12/13] arm: dts: mt8390: add framebuffer reserved-memory   Julien Stephan
• [PATCH v5 12/13] arm: dts: mt8390: add framebuffer reserved-memory   David Lechner
• [PATCH v5 12/13] doc: lx2160a: document the sd1 hwconfig option   Vincent Jardin
• [PATCH v5 12/21] ram: k3-ddrss: Add exit retention support   Kumar, Udit
• [PATCH v5 12/22] efi_loader: reserve FF-A shared buffer for runtime variables   Harsimran Singh Tungal
• [PATCH v5 12/22] efi_loader: reserve FF-A shared buffer for runtime variables   Ilias Apalodimas
• [PATCH v5 13/13] board: nbxv3: apply sd1 hwconfig before MC starts   Vincent Jardin
• [PATCH v5 13/13] configs: mediatek: mt8188: enable hdmi pipeline   Julien Stephan
• [PATCH v5 13/21] ram: k3-ddrss: Add j722s DDR resume sequence   Kumar, Udit
• [PATCH v5 13/22] efi_loader: enable TEE runtime SetVariable() over FF-A   Harsimran Singh Tungal
• [PATCH v5 13/22] efi_loader: enable TEE runtime SetVariable() over FF-A   Ilias Apalodimas
• [PATCH v5 14/22] efi_loader: enable TEE runtime GetVariable() over FF-A   Harsimran Singh Tungal
• [PATCH v5 15/21] arm: mach-k3: j721e: Enable LPM resume flow for J7200/J721e SOC   Kumar, Udit
• [PATCH v5 15/21] arm: mach-k3: j721e: Enable LPM resume flow for J7200/J721e SOC   Richard GENOUD
• [PATCH v5 15/21] arm: mach-k3: j721e: Enable LPM resume flow for J7200/J721e SOC   Kumar, Udit
• [PATCH v5 15/21] arm: mach-k3: j721e: Enable LPM resume flow for J7200/J721e SOC   Richard GENOUD
• [PATCH v5 15/22] efi_loader: enable TEE runtime GetNextVariableName() over FF-A   Harsimran Singh Tungal
• [PATCH v5 16/21] arm: mach-k3: j784s4: Enable LPM resume flow for J784s4/J742s2 SOCs   Kumar, Udit
• [PATCH v5 16/21] arm: mach-k3: j784s4: Enable LPM resume flow for J784s4/J742s2 SOCs   Thomas Richard
• [PATCH v5 16/22] efi_loader: enable TEE runtime QueryVariableInfo() over FF-A   Harsimran Singh Tungal
• [PATCH v5 17/21] arm: mach-k3: j722s: Enable LPM resume flow   Kumar, Udit
• [PATCH v5 17/22] charset: mark u16_strsize() as __efi_runtime   Harsimran Singh Tungal
• [PATCH v5 18/21] arm: mach-k3: j721s2: Enable LPM resume flow   Kumar, Udit
• [PATCH v5 18/22] corstone1000: enable bootefi selftest   Harsimran Singh Tungal
• [PATCH v5 19/21] arm: mach-k3: Update pm-boardcfg for all k3 platforms   Kumar, Udit
• [PATCH v5 19/22] efi: selftest: add runtime variable tests with non-volatile storage   Harsimran Singh Tungal
• [PATCH v5 2/2] riscv: timer: Enable early timer for M‑mode   Nikita Shubin
• [PATCH v5 2/3] spi: Introduce initial driver-model support for SPI EEPROMs   João Loureiro
• [PATCH v5 2/4] arm: mediatek: add MT8366 application processor   David Lechner
• [PATCH v5 2/4] arm: mediatek: add MT8366 application processor   Julien Stephan
• [PATCH v5 2/5] fastboot: use the common handler for USB reboot   Carlo Caione
• [PATCH v5 2/6] ufs: surface sense data from ufs_scsi_exec()   Jorge Ramirez-Ortiz
• [PATCH v5 20/21] arm: dts: k3-j7200: Remove background firewall on DDR   Kumar, Udit
• [PATCH v5 20/22] test: dm: add sandbox FF-A runtime transport tests   Harsimran Singh Tungal
• [PATCH v5 21/21] arm: dts: k3-j7200: Extend firewall for ATF region to TIFS   Kumar, Udit
• [PATCH v5 21/22] doc: arm64: document FF-A runtime path for EFI variables   Harsimran Singh Tungal
• [PATCH v5 22/22] doc: bootefi: note two-phase runtime variables selftest   Harsimran Singh Tungal
• [PATCH v5 3/3] sandbox: spi: Add SPI EEPROM emulator and DM test   João Loureiro
• [PATCH v5 3/4] arm: dts: mediatek: add Genio 360 EVK   David Lechner
• [PATCH v5 3/4] arm: dts: mediatek: add Genio 360 EVK   Julien Stephan
• [PATCH v5 3/5] fastboot: make shared configuration checks phase-aware   Carlo Caione
• [PATCH v5 3/5] fastboot: make shared configuration checks phase-aware   Mattijs Korpershoek
• [PATCH v5 3/6] ufs: add RPMB transport over SCSI SECURITY PROTOCOL   Jorge Ramirez-Ortiz
• [PATCH v5 3/6] ufs: add RPMB transport over SCSI SECURITY PROTOCOL   Stanley Jhu
• [PATCH v5 4/4] board: mediatek: add Genio 360 EVK defconfig   David Lechner
• [PATCH v5 4/5] image: sparse: add phase-aware SPL support   Carlo Caione
• [PATCH v5 4/6] ufs: derive the per-region RPMB CID and size for OP-TEE   Jorge Ramirez-Ortiz
• [PATCH v5 5/5] fastboot: add SPL support   Carlo Caione
• [PATCH v5 5/5] fastboot: add SPL support   David Lechner
• [PATCH v5 5/5] fastboot: add SPL support   Carlo Caione
• [PATCH v5 5/5] fastboot: add SPL support   David Lechner
• [PATCH v5 5/5] fastboot: add SPL support   Mattijs Korpershoek
• [PATCH v5 5/5] fastboot: add SPL support   Mattijs Korpershoek
• [PATCH v5 5/6] optee: rename rpmb.c to rpmb_emmc.c   Jorge Ramirez-Ortiz
• [PATCH v5 6/6] optee: implement the RPMB subsystem interface for UFS   Jorge Ramirez-Ortiz
• [PATCH v5] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Vandhiadevan Karunamoorthy
• [PATCH v6 0/3] spi: Introduce driver-model support for SPI EEPROMs   João Loureiro
• [PATCH v6 0/5] Add fastboot to SPL   Carlo Caione
• [PATCH v6 0/5] Add fastboot to SPL   Carlo Caione
• [PATCH v6 0/5] Add fastboot to SPL   Mattijs Korpershoek
• [PATCH v6 0/5] Add fastboot to SPL   Mattijs Korpershoek
• [PATCH v6 0/5] binman: add PKCS#11/HSM signing support for X509 certificates   Sergio Prado
• [PATCH v6 0/6] Add Genio 510 and Genio 700 SPL boot support   Carlo Caione
• [PATCH v6 0/7] Add support to boot TI K3 HSM M4 core   Neha Malcom Francis
• [PATCH v6 00/12] mediatek: add HDMI pipeline support for MT8188 based boards   Julien Stephan
• [PATCH v6 00/22] Introduce resume for J7xx SoCs   Richard Genoud (TI)
• [PATCH v6 00/24] Introduce Firmware Update Support for Arm PSA   Harsimran Singh Tungal
• [PATCH v6 01/12] memory: sort the Makefile alphabetically   Julien Stephan
• [PATCH v6 01/22] ram: k3-ddrss: Add support for DDR in self-refresh   Richard Genoud (TI)
• [PATCH v6 01/24] arm_ffa: Add FFA_MEM_SHARE support   Harsimran Singh Tungal
• [PATCH v6 02/12] memory: mediatek: add SMI larb driver   Julien Stephan
• [PATCH v6 02/22] firmware: ti_sci: Add TI_SCI_MSG_MIN_CONTEXT_RESTORE   Richard Genoud (TI)
• [PATCH v6 02/24] arm_ffa: Add FFA_MEM_RECLAIM support   Harsimran Singh Tungal
• [PATCH v6 03/12] video: mediatek: add display pipeline component helpers   Julien Stephan
• [PATCH v6 03/22] firmware: ti_sci: add low power mode operations   Richard Genoud (TI)
• [PATCH v6 03/24] arm_ffa: sandbox: Replace the emulator error log with debug log   Harsimran Singh Tungal
• [PATCH v6 04/12] video: mediatek: add ethdr component   Julien Stephan
• [PATCH v6 04/22] arm: mach-k3: security: introduce ti_secure_skip_cert()   Richard Genoud (TI)
• [PATCH v6 04/24] arm_ffa: sandbox: Improve the readability of clearing the X registers   Harsimran Singh Tungal
• [PATCH v6 05/12] video: mediatek: add merge component   Julien Stephan
• [PATCH v6 05/22] mach-k3: r5: common: add helper functions needed in LPM resume sequence   Richard Genoud (TI)
• [PATCH v6 05/24] arm_ffa: sandbox: Add FFA_MEM_SHARE emulation   Harsimran Singh Tungal
• [PATCH v6 06/12] video: mediatek: add mutex component   Julien Stephan
• [PATCH v6 06/22] mach-k3: r5: common: introduce j7xx_board_is_resuming()   Richard Genoud (TI)
• [PATCH v6 06/24] arm_ffa: sandbox: Add FFA_MEM_SHARE tests   Harsimran Singh Tungal
• [PATCH v6 07/12] video: mediatek: add padding component   Julien Stephan
• [PATCH v6 07/22] mach-k3: r5: common: introduce k3_deassert_ddr_ret()   Richard Genoud (TI)
• [PATCH v6 07/24] arm_ffa: sandbox: Add FFA_MEM_RECLAIM emulation   Harsimran Singh Tungal
• [PATCH v6 08/12] video: mediatek: add mdp rdma component   Julien Stephan
• [PATCH v6 08/22] board: mach-k3: r5: common: enable GTC after core_resume   Richard Genoud (TI)
• [PATCH v6 08/24] arm_ffa: sandbox: Add FFA_MEM_RECLAIM tests   Harsimran Singh Tungal
• [PATCH v6 09/12] video: mediatek: add dpi1 component   Julien Stephan
• [PATCH v6 09/22] board: evm: Enable de-isolation of IOs at resume for j7200 and j784s4   Richard Genoud (TI)
• [PATCH v6 09/24] fwu_arm_psa: Initialize the update agent   Harsimran Singh Tungal
• [PATCH v6 1/3] test: dm: sf: Get the emulator attached to the flash slave   João Loureiro
• [PATCH v6 1/3] test: dm: sf: Get the emulator attached to the flash slave   Simon Glass
• [PATCH v6 1/5] fastboot: factor out the USB session runner   Carlo Caione
• [PATCH v6 1/6] arm: dts: mediatek: prepare Genio 510 and 700 devices for SPL   Carlo Caione
• [PATCH v6 1/6] arm: dts: mediatek: prepare Genio 510 and 700 devices for SPL   David Lechner
• [PATCH v6 1/6] arm: dts: mediatek: prepare Genio 510 and 700 devices for SPL   Carlo Caione
• [PATCH v6 10/12] asm-generic: unaligned: add get_unaligned_le24()   Julien Stephan
• [PATCH v6 10/22] board: mach-k3: r5: common: Store wakeup reason on scratchpad memory   Richard Genoud (TI)
• [PATCH v6 10/24] fwu_arm_psa: Read the FWU directory through get_image_info()   Harsimran Singh Tungal
• [PATCH v6 11/12] video: mediatek: add hdmi driver   Julien Stephan
• [PATCH v6 11/22] board: mach-k3: r5: common: Set PMIC NSLEEP triggers bits at resume   Richard Genoud (TI)
• [PATCH v6 11/24] fwu_arm_psa: Add staging ABIs   Harsimran Singh Tungal
• [PATCH v6 12/12] configs: mediatek: mt8188: enable hdmi pipeline   Julien Stephan
• [PATCH v6 12/22] ram: k3-ddrss: Add exit retention support   Richard Genoud (TI)
• [PATCH v6 12/24] efi_loader: fwu_arm_psa: Add set_image() support   Harsimran Singh Tungal
• [PATCH v6 13/22] ram: k3-ddrss: Add j722s DDR resume sequence   Richard Genoud (TI)
• [PATCH v6 13/24] efi_loader: fwu_arm_psa: Allow keeping the FMP payload header   Harsimran Singh Tungal
• [PATCH v6 13/24] efi_loader: fwu_arm_psa: Allow keeping the FMP payload header   Ilias Apalodimas
• [PATCH v6 14/22] ram: k3-ddrss: support j784s4/j721s2 DDR resume   Richard Genoud (TI)
• [PATCH v6 14/24] efi_loader: fwu_arm_psa: Skip accepting payload after set_image()   Harsimran Singh Tungal
• [PATCH v6 15/22] arm: mach-k3: j721e: Enable LPM resume flow for J7200 SOC   Richard Genoud (TI)
• [PATCH v6 15/24] efi_loader: fwu_arm_psa: Disable trial state handling   Harsimran Singh Tungal
• [PATCH v6 16/22] arm: mach-k3: j784s4: Enable LPM resume flow for J784s4/J742s2 SOCs   Richard Genoud (TI)
• [PATCH v6 16/24] fwu_arm_psa: Add FWU acceptance mechanism   Harsimran Singh Tungal
• [PATCH v6 17/22] arm: mach-k3: j722s: Enable LPM resume flow   Richard Genoud (TI)
• [PATCH v6 17/24] fwu_arm_psa: Add ESRT support   Harsimran Singh Tungal
• [PATCH v6 18/22] arm: mach-k3: j721s2: Enable LPM resume flow   Richard Genoud (TI)
• [PATCH v6 18/24] fwu_arm_psa: Add ExitBootServices() notification handler   Harsimran Singh Tungal
• [PATCH v6 19/22] arm: mach-k3: Update pm-boardcfg for all k3 platforms   Richard Genoud (TI)
• [PATCH v6 19/24] efi_loader: capsule: Add runtime capsule flags checks   Harsimran Singh Tungal
• [PATCH v6 2/3] spi: Introduce initial driver-model support for SPI EEPROMs   João Loureiro
• [PATCH v6 2/3] spi: Introduce initial driver-model support for SPI EEPROMs   Simon Glass
• [PATCH v6 2/5] fastboot: use the common handler for USB reboot   Carlo Caione
• [PATCH v6 2/6] configs: mt8188: enable eMMC FIT boot from SPL   Carlo Caione
• [PATCH v6 2/6] configs: mt8188: enable eMMC FIT boot from SPL   Macpaul Lin (林智斌)
• [PATCH v6 2/6] configs: mt8188: enable eMMC FIT boot from SPL   David Lechner
• [PATCH v6 2/6] configs: mt8188: enable eMMC FIT boot from SPL   Carlo Caione
• [PATCH v6 20/22] arm: dts: k3-j7200: Remove background firewall on DDR   Richard Genoud (TI)
• [PATCH v6 20/24] fwu_arm_psa: corstone1000: Enable FWU support   Harsimran Singh Tungal
• [PATCH v6 21/22] arm: dts: k3-j7200: Extend firewall for ATF region to TIFS   Richard Genoud (TI)
• [PATCH v6 21/24] fwu_arm_psa: corstone1000: Read active index for kernel setup   Harsimran Singh Tungal
• [PATCH v6 22/22] doc: board: ti: Add Jacinto resume flow   Richard Genoud (TI)
• [PATCH v6 22/24] fwu_arm_psa: corstone1000: Notify SE Proxy SP on ExitBootServices()   Harsimran Singh Tungal
• [PATCH v6 23/24] fwu_arm_psa: corstone1000: Set Boot0001 for on-disk FWU   Harsimran Singh Tungal
• [PATCH v6 24/24] fwu_arm_psa: Document FWU support for Arm PSA   Harsimran Singh Tungal
• [PATCH v6 3/3] sandbox: spi: Add SPI EEPROM emulator and DM test   João Loureiro
• [PATCH v6 3/5] fastboot: make shared configuration checks phase-aware   Carlo Caione
• [PATCH v6 3/6] arm: mediatek: build Genio 510 and 700 boot images with binman   Carlo Caione
• [PATCH v6 3/6] arm: mediatek: build Genio 510 and 700 boot images with binman   David Lechner
• [PATCH v6 3/6] arm: mediatek: build Genio 510 and 700 boot images with binman   Carlo Caione
• [PATCH v6 4/5] image: sparse: add phase-aware SPL support   Carlo Caione
• [PATCH v6 4/6] arm: dts: mediatek: support signed Genio 510 and 700 bootloader FIT   Carlo Caione
• [PATCH v6 5/5] fastboot: add SPL support   Carlo Caione
• [PATCH v6 5/6] arm: dts: mediatek: emit the Genio 510 and 700 BootROM payload   Carlo Caione
• [PATCH v6 6/6] doc: board: mediatek: document Genio 510 and 700 SPL boot   Carlo Caione
• [PATCH v6 6/6] doc: board: mediatek: document Genio 510 and 700 SPL boot   Macpaul Lin (林智斌)
• [PATCH v6 6/6] doc: board: mediatek: document Genio 510 and 700 SPL boot   David Lechner
• [PATCH v6 6/6] doc: board: mediatek: document Genio 510 and 700 SPL boot   Carlo Caione
• [PATCH v6 6/6] doc: board: mediatek: document Genio 510 and 700 SPL boot   Carlo Caione
• [PATCH v6 6/6] doc: board: mediatek: document Genio 510 and 700 SPL boot   David Lechner
• [PATCH v6 7/7] doc: board: ti: k3: Add section for HSM M4F core loading   Kumar, Udit
• [PATCH v7 0/6] Add Genio 510 and Genio 700 SPL boot support   Carlo Caione
• [PATCH v7 0/6] Add Genio 510 and Genio 700 SPL boot support   David Lechner
• [PATCH v7 0/7] Add support to boot TI K3 HSM M4 core   Beleswar Padhi
• [PATCH v7 00/12] mediatek: add HDMI pipeline support for MT8188 based boards   Julien Stephan
• [PATCH v7 00/13] arm: u8500: Enable upstream DT based SD card boot   Linus Walleij
• [PATCH v7 00/13] arm: u8500: Enable upstream DT based SD card boot   Tom Rini
• [PATCH v7 00/13] arm: u8500: Enable upstream DT based SD card boot   Linus Walleij
• [PATCH v7 00/13] arm: u8500: Enable upstream DT based SD card boot   Tom Rini
• [PATCH v7 00/13] arm: u8500: Enable upstream DT based SD card boot   Tom Rini
• [PATCH v7 00/13] arm: u8500: Enable upstream DT based SD card boot   Linus Walleij
• [PATCH v7 00/24] usb: dwc3: part 2, make the resynced code work   Love Kumar
• [PATCH v7 00/63] usb: dwc3: part 1, reset and import from Linux v6.16   Love Kumar
• [PATCH v7 00/63] usb: dwc3: part 1, reset and import from Linux v6.16   Anshul Dalal
• [PATCH v7 01/12] memory: sort the Makefile alphabetically   Julien Stephan
• [PATCH v7 01/13] pinctrl: Add compact Nomadik pin controller   Linus Walleij
• [PATCH v7 01/24] dm: add helpers needed by the resynced DWC3 code   Mattijs Korpershoek
• [PATCH v7 02/12] memory: mediatek: add SMI larb driver   Julien Stephan
• [PATCH v7 02/13] mmc: arm_pl180: Configure Ux500 signal direction   Linus Walleij
• [PATCH v7 02/24] usb: phy: add the usb_phy helpers needed by the resynced DWC3 code   Mattijs Korpershoek
• [PATCH v7 03/12] video: mediatek: add display pipeline component helpers   Julien Stephan
• [PATCH v7 03/13] mmc: arm_pl180: Gate idle card clocks   Linus Walleij
• [PATCH v7 04/12] video: mediatek: add ethdr component   Julien Stephan
• [PATCH v7 04/13] power: regulator: Add driver voltage clamp callback   Linus Walleij
• [PATCH v7 05/12] video: mediatek: add merge component   Julien Stephan
• [PATCH v7 05/13] mmc: arm_pl180: Set initial supply voltages   Linus Walleij
• [PATCH v7 06/12] video: mediatek: add mutex component   Julien Stephan
• [PATCH v7 06/13] mmc: arm_pl180: Power down card supplies at OS handoff   Linus Walleij
• [PATCH v7 07/12] video: mediatek: add padding component   Julien Stephan
• [PATCH v7 07/13] power: regulator: Add AB8500 AUX3 support   Linus Walleij
• [PATCH v7 08/12] video: mediatek: add mdp rdma component   Julien Stephan
• [PATCH v7 08/13] arm: u8500: Enable SD card regulators   Linus Walleij
• [PATCH v7 09/12] video: mediatek: add dpi1 component   Julien Stephan
• [PATCH v7 09/13] configs: stemmy: Boot EFI from external SD card   Linus Walleij
• [PATCH v7 1/6] arm: dts: mediatek: prepare Genio 510 and 700 devices for SPL   Carlo Caione
• [PATCH v7 1/7] arm: mach-k3: Add config options for packaging HSM firmware   Beleswar Padhi
• [PATCH v7 10/12] asm-generic: unaligned: add get_unaligned_le24()   Julien Stephan
• [PATCH v7 10/13] arm: u8500: Switch Stemmy to upstream Janice device tree   Linus Walleij
• [PATCH v7 11/12] video: mediatek: add hdmi driver   Julien Stephan
• [PATCH v7 11/13] ARM: dts: ux500: Make panel regulators have unique names   Linus Walleij
• [PATCH v7 12/12] configs: mediatek: mt8188: enable hdmi pipeline   Julien Stephan
• [PATCH v7 12/13] ARM: dts: ux500: Harmonize GPIO key names   Linus Walleij
• [PATCH v7 13/13] arm: u8500: Package Stemmy device trees in FIT   Linus Walleij
• [PATCH v7 2/6] configs: mt8188: enable eMMC FIT boot from SPL   Carlo Caione
• [PATCH v7 2/7] arm: dts: k3-{j721s2/j722s/j784s4}-binman: Add template for packing HSM firmware   Beleswar Padhi
• [PATCH v7 3/6] arm: mediatek: build Genio 510 and 700 boot images with binman   Carlo Caione
• [PATCH v7 3/7] binman: openssl: Add boot and load extensions to x509 cert   Beleswar Padhi
• [PATCH v7 4/6] arm: dts: mediatek: support signed Genio 510 and 700 bootloader FIT   Carlo Caione
• [PATCH v7 4/7] arm: dts: k3-{j721s2/j722s/j784s4}-r5.dtsi: Enable HSM core   Beleswar Padhi
• [PATCH v7 5/6] arm: dts: mediatek: emit the Genio 510 and 700 BootROM payload   Carlo Caione
• [PATCH v7 5/7] remoteproc: k3-hsm: Introduce a remoteproc driver for K3 HSM core   Beleswar Padhi
• [PATCH v7 6/6] doc: board: mediatek: document Genio 510 and 700 SPL boot   Carlo Caione
• [PATCH v7 6/7] arm: mach-k3: r5: common: Invoke boot of HSM M4 core   Beleswar Padhi
• [PATCH v7 6/7] net: pch_gbe: Add PHY reset and MAC address fallback for RISC-V   Tim Ouyang
• [PATCH v7 7/7] doc: board: ti: k3: Add section for HSM M4F core loading   Beleswar Padhi
• [PATCH v8 00/25] usb: dwc3: part 2, make the resynced code work   Anders Roxell
• [PATCH v8 00/25] usb: dwc3: part 2, make the resynced code work   Marek Vasut
• [PATCH v8 00/25] usb: dwc3: part 2, make the resynced code work   Anders Roxell
• [PATCH v8 01/25] dm: add helpers needed by the resynced DWC3 code   Anders Roxell
• [PATCH v8 02/25] usb: phy: add the usb_phy helpers needed by the resynced DWC3 code   Anders Roxell
• [PATCH v8 03/25] usb: gadget: adapt the gadget API after the resync   Anders Roxell
• [PATCH v8 04/25] usb: gadget: udc: make udc-core build in u-boot   Anders Roxell
• [PATCH v8 05/25] usb: dwc3: make the core driver build in u-boot   Anders Roxell
• [PATCH v8 06/25] usb: dwc3: bring back the samsung usb phy driver   Anders Roxell
• [PATCH v8 07/25] usb: dwc3: make gadget and ep0 build in u-boot   Anders Roxell
• [PATCH v8 08/25] usb: gadget: udc: enable async callbacks on bind   Anders Roxell
• [PATCH v8 09/25] usb: dwc3: ep0: flush and invalidate cache around ep0 transfers   Anders Roxell
• [PATCH v8 10/25] usb: dwc3: gadget: flush and invalidate cache around transfers   Anders Roxell
• [PATCH v8 11/25] usb: dwc3: make the am62 glue build in u-boot   Anders Roxell
• [PATCH v8 12/25] usb: gadget: ci_udc: move to the udc-core registration   Anders Roxell
• [PATCH v8 13/25] usb: gadget: ci_udc: set endpoint capabilities   Anders Roxell
• [PATCH v8 14/25] usb: gadget: dwc2_udc_otg: fix up after the resync   Anders Roxell
• [PATCH v8 15/25] usb: gadget: fix up the function drivers after the resync   Anders Roxell
• [PATCH v8 16/25] usb: gadget: fix up the last UDC drivers after the resync   Anders Roxell
• [PATCH v8 17/25] usb: gadget: atmel_usba_udc: set endpoint capabilities   Anders Roxell
• [PATCH v8 18/25] usb: gadget: at91_udc: register with udc-core   Anders Roxell
• [PATCH v8 19/25] usb: gadget: at91_udc: set endpoint capabilities   Anders Roxell
• [PATCH v8 20/25] usb: musb-new: fix up after the resync   Anders Roxell
• [PATCH v8 21/25] usb: musb-new: set endpoint capabilities   Anders Roxell
• [PATCH v8 22/25] usb: mtu3: fix up after the resync   Anders Roxell
• [PATCH v8 23/25] usb: mtu3: set endpoint capabilities   Anders Roxell
• [PATCH v8 24/25] usb: host: xhci: fix up after the resync   Anders Roxell
• [PATCH v8 25/25] usb: cdns3: fix up after the resync   Anders Roxell
• [PATCH v9 0/8] Improve FIT signature handling   Ludwig Nussel
• [PATCH v9 0/8] Improve FIT signature handling   Tom Rini
• [PATCH v9 00/15] add software ecdsa support   Philippe Reynes
• [PATCH v9 00/15] add software ecdsa support   Raymond Mao
• [PATCH v9 00/15] add software ecdsa support   Philippe Reynes
• [PATCH v9 00/15] add software ecdsa support   Tom Rini
• [PATCH v9 00/15] add software ecdsa support   Philippe Reynes
• [PATCH v9 00/15] add software ecdsa support   Tom Rini
• [PATCH v9 00/15] Qualcomm IPQ5210 SoC bringup   Varadarajan Narayanan
• [PATCH v9 00/15] Qualcomm IPQ5210 SoC bringup   Heiko Schocher
• [PATCH v9 00/15] Qualcomm IPQ5210 SoC bringup   Varadarajan Narayanan
• [PATCH v9 00/26] usb: dwc3: part 2, make the resynced code work   Anders Roxell
• [PATCH v9 00/26] usb: dwc3: part 2, make the resynced code work   Anshul Dalal
• [PATCH v9 00/26] usb: dwc3: part 2, make the resynced code work   Anders Roxell
• [PATCH v9 00/26] usb: dwc3: part 2, make the resynced code work   Siddharth Vadapalli
• [PATCH v9 00/26] usb: dwc3: part 2, make the resynced code work   Anders Roxell
• [PATCH v9 00/26] usb: dwc3: part 2, make the resynced code work   Siddharth Vadapalli
• [PATCH v9 00/26] usb: dwc3: part 2, make the resynced code work   Anders Roxell
• [PATCH v9 01/15] ecdsa: fix support of secp521r1   Philippe Reynes
• [PATCH v9 01/15] ecdsa: fix support of secp521r1   Philippe Reynes
• [PATCH v9 01/15] ecdsa: fix support of secp521r1   Raymond Mao
• [PATCH v9 01/15] misc: qcom_geni: Add minicore support   Varadarajan Narayanan
• [PATCH v9 01/26] x86: asm: io.h: add rmb() and wmb()   Anders Roxell
• [PATCH v9 02/15] mach-snapdragon: Kconfig: Auto select options based on configs   Varadarajan Narayanan
• [PATCH v9 02/15] mbedtls: enable support of ecc   Philippe Reynes
• [PATCH v9 02/15] mbedtls: enable support of ecc   Philippe Reynes
• [PATCH v9 02/15] mbedtls: enable support of ecc   Raymond Mao
• [PATCH v9 02/26] dm: add helpers needed by the resynced DWC3 code   Anders Roxell
• [PATCH v9 03/15] ecdsa: initial support of ecdsa using mbedtls   Philippe Reynes
• [PATCH v9 03/15] ecdsa: initial support of ecdsa using mbedtls   Philippe Reynes
• [PATCH v9 03/15] ecdsa: initial support of ecdsa using mbedtls   Raymond Mao
• [PATCH v9 03/15] mach-snapdragon: Add PBL shared data defines   Varadarajan Narayanan
• [PATCH v9 03/26] usb: phy: add the usb_phy helpers needed by the resynced DWC3 code   Anders Roxell
• [PATCH v9 04/15] mach-snapdragon: spl: Update boot device information in SMEM   Varadarajan Narayanan
• [PATCH v9 04/15] test: lib: ecdsa: add initial test   Philippe Reynes
• [PATCH v9 04/15] test: lib: ecdsa: add initial test   Philippe Reynes
• [PATCH v9 04/15] test: lib: ecdsa: add initial test   Raymond Mao
• [PATCH v9 04/26] usb: gadget: adapt the gadget API after the resync   Anders Roxell
• [PATCH v9 05/15] drivers: crypto: add software ecdsa support   Philippe Reynes
• [PATCH v9 05/15] drivers: crypto: add software ecdsa support   Philippe Reynes
• [PATCH v9 05/15] drivers: crypto: add software ecdsa support   Raymond Mao
• [PATCH v9 05/15] drivers: crypto: add software ecdsa support   Raymond Mao
• [PATCH v9 05/15] drivers: crypto: add software ecdsa support   Tom Rini
• [PATCH v9 05/15] mach-snapdragon: spl: Add support for MMC booting in SPL   Varadarajan Narayanan
• [PATCH v9 05/26] usb: gadget: udc: make udc-core build in U-Boot   Anders Roxell
• [PATCH v9 06/15] mach-snapdragon: Kconfig: Add rules to create SPL images   Varadarajan Narayanan
• [PATCH v9 06/15] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented   Philippe Reynes
• [PATCH v9 06/15] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented   Philippe Reynes
• [PATCH v9 06/15] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented   Raymond Mao
• [PATCH v9 06/26] usb: dwc3: make the core driver build in U-Boot   Anders Roxell
• [PATCH v9 07/15] mach-snapdragon: spl: Load next stage FIT image   Varadarajan Narayanan
• [PATCH v9 07/15] test: py: vboot: prepare integration test for ecdsa   Philippe Reynes
• [PATCH v9 07/15] test: py: vboot: prepare integration test for ecdsa   Philippe Reynes
• [PATCH v9 07/15] test: py: vboot: prepare integration test for ecdsa   Raymond Mao
• [PATCH v9 07/26] usb: dwc3: bring back the samsung usb phy driver   Anders Roxell
• [PATCH v9 08/15] mach-snapdragon: spl: Add DDR initialization support   Varadarajan Narayanan
• [PATCH v9 08/15] test: vboot: add test for ecdsa   Philippe Reynes
• [PATCH v9 08/15] test: vboot: add test for ecdsa   Philippe Reynes
• [PATCH v9 08/15] test: vboot: add test for ecdsa   Raymond Mao
• [PATCH v9 08/26] usb: dwc3: make gadget and ep0 build in U-Boot   Anders Roxell
• [PATCH v9 09/15] mach-snapdragon: Add Qclib handling support   Varadarajan Narayanan
• [PATCH v9 09/15] tools: fit_image_setup_sig: set required_keynode to -1   Philippe Reynes
• [PATCH v9 09/15] tools: fit_image_setup_sig: set required_keynode to -1   Philippe Reynes
• [PATCH v9 09/15] tools: fit_image_setup_sig: set required_keynode to -1   Raymond Mao
• [PATCH v9 09/26] usb: gadget: udc: enable async callbacks on bind   Anders Roxell
• [PATCH v9 1/8] test: include mapmem.h explicitly   Ludwig Nussel
• [PATCH v9 10/15] dts: ipq5210-rdp504-u-boot: add override dtsi   Varadarajan Narayanan
• [PATCH v9 10/15] tools: mkimage: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v9 10/15] tools: mkimage: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v9 10/15] tools: mkimage: pre-load: add support of ecdsa   Raymond Mao
• [PATCH v9 10/26] usb: dwc3: ep0: flush and invalidate cache around ep0 transfers   Anders Roxell
• [PATCH v9 11/15] clk/qcom: add clock driver for ipq5210   Varadarajan Narayanan
• [PATCH v9 11/15] tools: binman: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v9 11/15] tools: binman: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v9 11/15] tools: binman: pre-load: add support of ecdsa   Raymond Mao
• [PATCH v9 11/26] usb: dwc3: gadget: flush and invalidate cache around transfers   Anders Roxell
• [PATCH v9 12/15] boot: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v9 12/15] boot: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v9 12/15] boot: pre-load: add support of ecdsa   Raymond Mao
• [PATCH v9 12/15] pinctrl: qcom: Add ipq5210 pinctrl driver   Varadarajan Narayanan
• [PATCH v9 12/26] usb: dwc3: make the am62 glue build in U-Boot   Anders Roxell
• [PATCH v9 13/15] mach-snapdragon: spl: ipq5210: Add SPL support   Varadarajan Narayanan
• [PATCH v9 13/15] tools: preload_check_sign: add support of ecdsa   Philippe Reynes
• [PATCH v9 13/15] tools: preload_check_sign: add support of ecdsa   Philippe Reynes
• [PATCH v9 13/15] tools: preload_check_sign: add support of ecdsa   Raymond Mao
• [PATCH v9 13/26] usb: gadget: ci_udc: move to the udc-core registration   Anders Roxell
• [PATCH v9 14/15] configs: Add qcom_ipq5210_mmc_defconfig   Varadarajan Narayanan
• [PATCH v9 14/15] test: py: vboot: prepare test for global signature with ecdsa   Philippe Reynes
• [PATCH v9 14/15] test: py: vboot: prepare test for global signature with ecdsa   Philippe Reynes
• [PATCH v9 14/15] test: py: vboot: prepare test for global signature with ecdsa   Raymond Mao
• [PATCH v9 14/26] usb: gadget: ci_udc: set endpoint capabilities   Anders Roxell
• [PATCH v9 15/15] doc: board/qualcomm: Update RDP build instructions   Varadarajan Narayanan
• [PATCH v9 15/15] test: py: vboot: add test for global signature with ecdsa   Philippe Reynes
• [PATCH v9 15/15] test: py: vboot: add test for global signature with ecdsa   Philippe Reynes
• [PATCH v9 15/15] test: py: vboot: add test for global signature with ecdsa   Raymond Mao
• [PATCH v9 15/26] usb: gadget: dwc2_udc_otg: fix up after the resync   Anders Roxell
• [PATCH v9 16/26] usb: gadget: fix up the function drivers after the resync   Anders Roxell
• [PATCH v9 17/26] usb: gadget: fix up the last UDC drivers after the resync   Anders Roxell
• [PATCH v9 18/26] usb: gadget: atmel_usba_udc: set endpoint capabilities   Anders Roxell
• [PATCH v9 19/26] usb: gadget: at91_udc: register with udc-core   Anders Roxell
• [PATCH v9 2/8] qemu-arm64: merge built-in DT   Ludwig Nussel
• [PATCH v9 20/26] usb: gadget: at91_udc: set endpoint capabilities   Anders Roxell
• [PATCH v9 21/26] usb: musb-new: fix up after the resync   Anders Roxell
• [PATCH v9 22/26] usb: musb-new: set endpoint capabilities   Anders Roxell
• [PATCH v9 23/26] usb: mtu3: fix up after the resync   Anders Roxell
• [PATCH v9 24/26] usb: mtu3: set endpoint capabilities   Anders Roxell
• [PATCH v9 25/26] usb: host: xhci: fix up after the resync   Anders Roxell
• [PATCH v9 26/26] usb: cdns3: fix up after the resync   Anders Roxell
• [PATCH v9 3/8] mkimage: define log_err and log_info   Ludwig Nussel
• [PATCH v9 4/8] image-fit-sig: Optionally require signatures   Ludwig Nussel
• [PATCH v9 4/8] image-fit-sig: Optionally require signatures   Leonard Anderweit
• [PATCH v9 4/8] image-fit-sig: Optionally require signatures   Ludwig Nussel
• [PATCH v9 5/8] test: vboot: handle CONFIG_FIT_REQUIRE_CONFIG_SIGS in test_vboot   Ludwig Nussel
• [PATCH v9 6/8] iminfo: also verify signatures   Ludwig Nussel
• [PATCH v9 7/8] test: vboot: refactor run_bootm   Ludwig Nussel
• [PATCH v9 8/8] test: vboot: add iminfo checks   Ludwig Nussel
• [PULL] Pull request for u-boot master / v2026.10 = u-boot-stm32-20260921   Patrice CHOTARD
• [PULL] Pull request for u-boot master / v2026.10 = u-boot-stm32-20260921   Tom Rini
• [PULL] Pull request for u-boot master / v2026.10 = u-boot-stm32_20260831   Patrice CHOTARD
• [PULL] Pull request for u-boot master / v2026.10 = u-boot-stm32_20260831   Tom Rini
• [PULL] Pull request for u-boot master / v2026.10 = u-boot-stm32_20260902   Patrice CHOTARD
• [PULL] Pull request for u-boot master / v2026.10 = u-boot-stm32_20260902   Tom Rini
• [PULL] Pull request for u-boot next / v2027.01 = u-boot-stm32-20260922   Patrice CHOTARD
• [PULL] Pull request for u-boot next / v2027.01 = u-boot-stm32-20260922   Tom Rini
• [PULL] Pull request for u-boot next / v2027.01 = u-boot-stm32_20260901   Patrice CHOTARD
• [PULL] Pull request for u-boot next / v2027.01 = u-boot-stm32_20260901   Tom Rini
• [PULL] u-boot-sh/main   Marek Vasut
• [PULL] u-boot-sh/main   Tom Rini
• [PULL] u-boot-sh/main   Marek Vasut
• [PULL] u-boot-sh/main   Tom Rini
• [PULL] u-boot-usb/main   Marek Vasut
• [PULL] u-boot-usb/main   Tom Rini
• [QUESTION] SpacemiT K1: Incorrect RAM detection with unpopulated CS1   Michael Opdenacker
• [RESEND PATCH 1/2] mmc: sdhci-cadence6: flush posted writes to PHY registers   NG, TZE YEE
• [RESEND PATCH 1/2] mmc: sdhci-cadence6: flush posted writes to PHY registers   Kathpalia, Tanmay
• [RESEND PATCH 1/2] mmc: sdhci-cadence6: flush posted writes to PHY registers   NG, TZE YEE
• [RESEND PATCH 2/2] mmc: sdhci-cadence6: wait for the PHY to settle after adjustment   NG, TZE YEE
• [RESEND PATCH 2/2] mmc: sdhci-cadence6: wait for the PHY to settle after adjustment   Kathpalia, Tanmay
• [RESEND PATCH 2/2] mmc: sdhci-cadence6: wait for the PHY to settle after adjustment   NG, TZE YEE
• [RESEND PATCH] fw_env: allow detection of NVMEM device using layout node compatible string   Michael C. Pratt
• [RESEND PATCH] fw_env: allow detection of NVMEM device using layout node compatible string   Tom Rini
• [RFC] XPL linker scripts and related Kconfig options questions   Massimo Pegorer
• [RFC] XPL linker scripts and related Kconfig options questions   Tom Rini
• [RFC PATCH 0/4] crypto: add FIPS 204 ML-DSA verification   Ayoub Zaki
• [RFC PATCH 0/4] crypto: add FIPS 204 ML-DSA verification   Tom Rini
• [RFC PATCH 0/4] crypto: add FIPS 204 ML-DSA verification   Ayoub Zaki
• [RFC PATCH 0/4] crypto: add FIPS 204 ML-DSA verification   Tom Rini
• [RFC PATCH 0/4] crypto: add FIPS 204 ML-DSA verification   Ayoub Zaki
• [RFC PATCH 0/4] crypto: add FIPS 204 ML-DSA verification   Ilias Apalodimas
• [RFC PATCH 0/4] crypto: add FIPS 204 ML-DSA verification   Ayoub Zaki
• [RFC PATCH 0/4] crypto: add FIPS 204 ML-DSA verification   Ilias Apalodimas
• [RFC PATCH 0/4] net: lwip: add httpd command for browser based uploads   Vitaliy Sochnev
• [RFC PATCH 1/4] net: lwip: add an httpd stop operation   Vitaliy Sochnev
• [RFC PATCH 1/4] net: lwip: add an httpd stop operation   Tom Rini
• [RFC PATCH 1/4] net: lwip: add an httpd stop operation   Vitaliy Sochnev
• [RFC PATCH 1/4] net: lwip: add an httpd stop operation   Tom Rini
• [RFC PATCH 2/4] net: lwip: add httpd command   Vitaliy Sochnev
• [RFC PATCH 3/4] doc: usage: cmd: add httpd   Vitaliy Sochnev
• [RFC PATCH 3/4] doc: usage: cmd: add httpd   Tom Rini
• [RFC PATCH 3/4] doc: usage: cmd: add httpd   Vitaliy Sochnev
• [RFC PATCH 4/4] test: py: net: add httpd test   Vitaliy Sochnev
• [RFC PATCH] pwm: meson: Add s4 support   Sean Anderson
• [RFC PATCH] vpl: make I2C and PCH options effective   Pengpeng Hou
• [RFC PATCH] vpl: make I2C and PCH options effective   Heiko Schocher
• [RFC PATCH] vpl: make I2C and PCH options effective   Tom Rini
• [SECURITY] FIT signature enforcement fails open when the control DTB has no /signature node   Eva Crystal
• [SECURITY] FIT signature enforcement fails open when the control DTB has no /signature node   Tom Rini
• [SECURITY] FIT signature enforcement fails open when the control DTB has no /signature node   Ludwig Nussel
• [SECURITY] FIT signature enforcement fails open when the control DTB has no /signature node   Eva Crystal
• [SECURITY] FIT signature enforcement fails open when the control DTB has no /signature node   Tom Rini
• [SECURITY] FIT signature enforcement fails open when the control DTB has no /signature node   Ludwig Nussel
• [SECURITY] FIT signature enforcement fails open when the control DTB has no /signature node   Eva Crystal
• [SECURITY] FIT signature enforcement fails open when the control DTB has no /signature node   Tom Rini
• [SECURITY] FIT signature enforcement fails open when the control DTB has no /signature node   Eva Crystal
• [SECURITY] FIT signature enforcement fails open when the control DTB has no /signature node   Tom Rini
• [SECURITY] FWU v2 metadata_size under-validation causes heap out-of-bounds read   Jaeyeong Lee
• [SECURITY] FWU v2 metadata_size under-validation causes heap out-of-bounds read   Jaeyeong Lee
• [SECURITY] MPC8xx serial RX buffer overlaps SPI descriptors in DPRAM   Jaeyeong Lee
• [SECURITY] MPC8xx serial RX buffer overlaps SPI descriptors in DPRAM   Heiko Schocher
• [u-boot-test-hooks][PATCH] travis-ci: Add 9P device support to qemu_arm64   Tom Rini
• [Uboot-stm32] [PATCH] ARM: stm32mp2: fix TAMP_FWU_BOOT_IDX_MASK/OFFSET definition   Patrice CHOTARD
• [Uboot-stm32] [PATCH] MAINTAINERS: Replace STM32 and STPMIC with N:   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2] ARM: dts: stm32: add U-Boot specific dtsi for stm32mp157f-dk2   Patrice CHOTARD
• [UBOOT PATCH] fpga: versalpl: fix OOB write in versal_align_dma_buffer()   Prasad Kummari
• [UBOOT PATCH] fpga: versalpl: fix OOB write in versal_align_dma_buffer()   Kummari, Prasad
• [v1,0/3] mtd: spi: Microchip 23LCV1024 SPI SRAM   Simon Glass
• [v1,0/5] tools: mkimage: support shared image data through the image-data property   Simon Glass
• [v1,0/5] tools: mkimage: support shared image data through the image-data property   Aristo Chen
• [v1, 0/8] gpt: enable writing a full-featured GPT via 'gpt write' over fastboot   Simon Glass
• [v3, 0/5] firmware-owned devicetree for EBBR / SystemReady DeviceTree   Simon Glass
• autoboot.c   Simon Glass
• autoboot.c   Mattias Barthel
• autoboot.c   Mattias Barthel
• autoboot.c   Simon Glass
• Bug 32bit truncation in mmc_get_env_addr()   Torsten Rupp
• Bug 32bit truncation in mmc_get_env_addr()   Fabio Estevam
• Bug 32bit truncation in mmc_get_env_addr()   Fabio Estevam
• caam: maintainer address bounce   Heiko Schocher
• Can u-boot UEFI provider implementation boot systemd-boot / systemd-stub?   Umut Tezduyar Lindskog
• Coverity 652910 Uninitialized pointer read   Mattijs Korpershoek
• Fwd: autoboot.c   Mattias Barthel
• imx: add support for system controller watchdog   Stefano Manni
• Incomplete FIT image documentation for qualcomm soc   Biswapriyo Nath
• List of unused Kconfig symbols   Tom Rini
• pci-uclass.c not working for second device on 88W9098   Jacco Braat
• Please pull net-20260914   Jerome Forissier
• Please pull net-20260914   Tom Rini
• Please pull net-20260915   Jerome Forissier
• Please pull net-20260915   Tom Rini
• Please pull net-next-20260923   Jerome Forissier
• Please pull net-next-20260923   Tom Rini
• Pull request efi-2026-10-rc4-2   Heinrich Schuchardt
• Pull request efi-2026-10-rc4-2   Tom Rini
• Pull request for optee-next-30092026   Ilias Apalodimas
• Pull request for optee-next-30092026   Tom Rini
• Review of i.MX binman patches   Fabio Estevam
• Review of i.MX binman patches   Simon Glass
• rpi: copy few more things from the firmware device tree to make rpi-eeprom-update work   adel.ks at zegrapher.com
• U-Boot USB host trusts advertised interface count after parsing fewer interfaces   Lee, Brian J
• USB host: multiple drivers for one composite device   Kalle Ahlström