August 2026 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Aug 1 00:55:20 UTC 2026
Ending: Mon Aug 31 23:01:14 UTC 2026
Messages: 3118

• 回复: [PATCH v2 0/4] board: imx93_evk: add i.MX93W EVK support   Alice Guo (OSS)
• [PATCH v2] mmc: meson: Parse devicetree properties   Peng Fan (OSS)
• [PATCH] net: ti: cpsw: Skip disabled ports in switch binding   Markus Schneider-Pargmann (TI)
• [PATCH] simple-pm-bus: Fix clk -ENOSYS check   Markus Schneider-Pargmann (TI)
• [PATCH] clk: clk-uclass: Ignore -ENOSYS in clk_set_default_rates()   Markus Schneider-Pargmann (TI)
• [PATCH] mmc: omap_hsmmc: Add "ti,am437-sdhci" compatible   Markus Schneider-Pargmann (TI)
• [PATCH 0/3] bus: ti-sysc: Prepare for use with am43 and OF_UPSTREAM   Markus Schneider-Pargmann (TI)
• [PATCH 1/3] bus: ti-sysc: Tolerate disabled CLK   Markus Schneider-Pargmann (TI)
• [PATCH 2/3] bus: ti-sysc: Simplify with clk_get_by_name_optional   Markus Schneider-Pargmann (TI)
• [PATCH 3/3] bus: ti-sysc: Add omap2/4-timer compatibles   Markus Schneider-Pargmann (TI)
• [PATCH v5 00/21] Introduce resume for J7xx SoCs   Richard Genoud (TI)
• [PATCH v5 01/21] ram: k3-ddrss: Add support for DDR in self-refresh   Richard Genoud (TI)
• [PATCH v5 02/21] firmware: ti_sci: Add TI_SCI_MSG_MIN_CONTEXT_RESTORE   Richard Genoud (TI)
• [PATCH v5 03/21] firmware: ti_sci: add low power mode operations   Richard Genoud (TI)
• [PATCH v5 04/21] mach-k3: r5: common: add helper functions needed in LPM resume sequence   Richard Genoud (TI)
• [PATCH v5 05/21] global: k3: use gd to store the resume state   Richard Genoud (TI)
• [PATCH v5 06/21] mach-k3: r5: common: introduce j7xx_board_is_resuming()   Richard Genoud (TI)
• [PATCH v5 07/21] mach-k3: r5: common: introduce k3_deassert_ddr_ret()   Richard Genoud (TI)
• [PATCH v5 08/21] board: mach-k3: r5: common: enable GTC after core_resume   Richard Genoud (TI)
• [PATCH v5 09/21] board: evm: Enable de-isolation of IOs at resume for j7200 and j784s4   Richard Genoud (TI)
• [PATCH v5 10/21] board: mach-k3: r5: common: Store wakeup reason on scratchpad memory   Richard Genoud (TI)
• [PATCH v5 11/21] board: mach-k3: r5: common: Set PMIC NSLEEP triggers bits at resume   Richard Genoud (TI)
• [PATCH v5 12/21] ram: k3-ddrss: Add exit retention support   Richard Genoud (TI)
• [PATCH v5 13/21] ram: k3-ddrss: Add j722s DDR resume sequence   Richard Genoud (TI)
• [PATCH v5 14/21] ram: k3-ddrss: support j784s4/j721e/j721s2 DDR resume   Richard Genoud (TI)
• [PATCH v5 15/21] arm: mach-k3: j721e: Enable LPM resume flow for J7200/J721e SOC   Richard Genoud (TI)
• [PATCH v5 16/21] arm: mach-k3: j784s4: Enable LPM resume flow for J784s4/J742s2 SOCs   Richard Genoud (TI)
• [PATCH v5 17/21] arm: mach-k3: j722s: Enable LPM resume flow   Richard Genoud (TI)
• [PATCH v5 18/21] arm: mach-k3: j721s2: Enable LPM resume flow   Richard Genoud (TI)
• [PATCH v5 19/21] arm: mach-k3: Update pm-boardcfg for all k3 platforms   Richard Genoud (TI)
• [PATCH v5 20/21] arm: dts: k3-j7200: Remove background firewall on DDR   Richard Genoud (TI)
• [PATCH v5 21/21] arm: dts: k3-j7200: Extend firewall for ATF region to TIFS   Richard Genoud (TI)
• [SECURITY] U-Boot: unvalidated IPv6 UDP length in net_ip6_handler() yields pre-auth OOB write / RCE via the DHCPv6 client (net/net6.c, net/dhcpv6.c)   Esteban Alba
• Network boot of Raspberry Pi 4 leads to unstable network in U-Boot   André Althaus
• Network boot of Raspberry Pi 4 leads to unstable network in U-Boot   André Althaus
• [PATCH] bcmgenet: Reset the PHY of Raspberry Pi   André Althaus
• [PATCH] fs: jffs2: set part->jffs2_priv to NULL after freeing cache   Lucas Martins Alves
• [PATCH] watchdog: meson_gxbb: Add support for s4/t7 SoCs   Sean Anderson
• [PATCH] serial: meson: Add s4 support   Sean Anderson
• [PATCH] reset: meson: Add s4 support   Sean Anderson
• [PATCH] mmc: meson: Parse devicetree properties   Sean Anderson
• [PATCH 1/2] pinctrl: meson: a1: Use gpio regs for ds   Sean Anderson
• [PATCH 2/2] pinctrl: meson: Add s4 pin controller   Sean Anderson
• [PATCH 0/9] arm64: meson: Add s4 support   Sean Anderson
• [PATCH 1/9] arm64: meson: Add s4 SoC support   Sean Anderson
• [PATCH 2/9] clk: meson: a1: Eliminate separate id parameter   Sean Anderson
• [PATCH 3/9] clk: meson: a1: Use clk_set_rate from meson_mux_set_rate   Sean Anderson
• [PATCH 4/9] clk: meson: Use soc-specific naming for common functions   Sean Anderson
• [PATCH 5/9] clk: meson: Export a1 functions to common file   Sean Anderson
• [PATCH 6/9] clk: meson: Support fractional fixed-factor clocks   Sean Anderson
• [PATCH 7/9] clk: meson: Support power-of-two dividers   Sean Anderson
• [PATCH 8/9] clk: meson: Add s4 clock driver   Sean Anderson
• [PATCH 9/9] [RFT] meson: Add Khadas VIM1S support   Sean Anderson
• [PATCH v2] mmc: meson: Parse devicetree properties   Sean Anderson
• [PATCH v2 1/2] pinctrl: meson: a1: Use gpio regs for ds   Sean Anderson
• [PATCH v2 2/2] pinctrl: meson: Add s4 pin controller   Sean Anderson
• [PATCH 1/9] arm64: meson: Add s4 SoC support   Sean Anderson
• [PATCH 9/9] [RFT] meson: Add Khadas VIM1S support   Sean Anderson
• [PATCH] Gitlab CI: sage: Disable test_net_tftpboot_boot on Raspberry Pi 4 for now   Ilias Apalodimas
• [PATCH 1/1] lib: correct list_guid[] array   Ilias Apalodimas
• [PATCH 2/2] arm64: renesas: Enable verbose DRAM layout print on Renesas R-Car X5H R8A78000   Ilias Apalodimas
• [PATCH 1/2] board_f: Add verbose DRAM layout print option   Ilias Apalodimas
• [PATCH 1/8] tools: mkeficapsule: Add support for parsing capsule params from config file   Ilias Apalodimas
• [PATCH 3/8] tools: mkeficapsule: Enable multi-payload grouping in config parser   Ilias Apalodimas
• Pull request for fwu-main-03082026   Ilias Apalodimas
• [PATCH 3/6] disk: part_mac: Fix stack corruption on devices with large blocks   Ilias Apalodimas
• [PATCH 2/6] disk: part_efi: Add missing endianness conversions   Ilias Apalodimas
• [PATCH 4/6] test: dm: part: Check the GPT layout for large sector sizes   Ilias Apalodimas
• [PATCH 5/6] test: py: gpt: Bind the disk image in test_gpt_write_part_type()   Ilias Apalodimas
• [PATCH 2/6] disk: part_efi: Add missing endianness conversions   Ilias Apalodimas
• [PATCH 2/6] disk: part_efi: Add missing endianness conversions   Ilias Apalodimas
• [PATCH 2/6] disk: part_efi: Add missing endianness conversions   Ilias Apalodimas
• [PATCH 1/6] disk: part_efi: Size the partition entry array from the block size   Ilias Apalodimas
• [PATCH v2 1/5] efi_loader: bootmgr: preserve a passed devicetree   Ilias Apalodimas
• [PATCH v2 2/5] boot: add a firmware-owned devicetree source   Ilias Apalodimas
• [PATCH next 11/45] doc: develop: uefi: update link to ipxe git repo   Ilias Apalodimas
• [PATCH 1/1] tools: build mkeficapsule for CONFIG_EFI_HAVE_CAPSULE_SUPPORT=y   Ilias Apalodimas
• [PATCH 1/2] efi_loader: in platform_get_rng_device() use EFI_PRINT()   Ilias Apalodimas
• [PATCH 1/2] board: amd: versal2: move platform_id/platform_version to .data   Ilias Apalodimas
• [PATCH 2/2] board: xilinx: versal-net: move platform_id/platform_version to .data   Ilias Apalodimas
• [PATCH 2/2] efi_loader: consider type of platform_get_rng_device() return value   Ilias Apalodimas
• [PATCH v4 07/22] arm: cache: keep range maintenance available at EFI runtime   Ilias Apalodimas
• [PATCH v4 08/22] efi_loader: add MM SP status mapping for FF-A variables   Ilias Apalodimas
• [PATCH v4 10/22] efi_loader: make FF-A MM SP notification runtime-safe   Ilias Apalodimas
• [PATCH v4 17/22] charset: mark u16_strsize() as __efi_runtime   Ilias Apalodimas
• [PATCH v4 13/22] efi_loader: enable TEE runtime SetVariable() over FF-A   Ilias Apalodimas
• [PATCH 2/2] Makefile: drop GNU Make < 4.0 compatibility code   Ilias Apalodimas
• [PATCH 2/2] configs: qcom: ignore OsIndications for capsule-on-disk   Ilias Apalodimas
• [PATCH 1/2] efi_loader: firmware: decouple dfu_alt_num from image_index   Ilias Apalodimas
• [PATCH] efi_loader: Remove duplicate declarations   Ilias Apalodimas
• [PATCH] pci: layerscape: fix pci_iommu_extra hotplug   Neil Armstrong
• [PATCH 4/7] interconnect: qcom: Add QCS8300 interconnect driver   Neil Armstrong
• [PATCH 1/7] clk: qcom: Add dedicated sa8775p RPMH clock driver   Neil Armstrong
• [PATCH v2 1/7] clk: qcom: Add shared RPMH clock driver for SM8550/SM8650/SA8775P   Neil Armstrong
• [PATCH] mmc: meson: Parse devicetree properties   Neil Armstrong
• [PATCH] watchdog: meson_gxbb: Add support for s4/t7 SoCs   Neil Armstrong
• [PATCH] reset: meson: Add s4 support   Neil Armstrong
• [PATCH] serial: meson: Add s4 support   Neil Armstrong
• [PATCH 1/2] pinctrl: meson: a1: Use gpio regs for ds   Neil Armstrong
• [PATCH 2/2] pinctrl: meson: Add s4 pin controller   Neil Armstrong
• [PATCH v2 2/2] pinctrl: meson: Add s4 pin controller   Neil Armstrong
• [PATCH 1/9] arm64: meson: Add s4 SoC support   Neil Armstrong
• [PATCH 2/9] clk: meson: a1: Eliminate separate id parameter   Neil Armstrong
• [PATCH 3/9] clk: meson: a1: Use clk_set_rate from meson_mux_set_rate   Neil Armstrong
• [PATCH 4/9] clk: meson: Use soc-specific naming for common functions   Neil Armstrong
• [PATCH 5/9] clk: meson: Export a1 functions to common file   Neil Armstrong
• [PATCH 6/9] clk: meson: Support fractional fixed-factor clocks   Neil Armstrong
• [PATCH 7/9] clk: meson: Support power-of-two dividers   Neil Armstrong
• [PATCH 8/9] clk: meson: Add s4 clock driver   Neil Armstrong
• [PATCH 9/9] [RFT] meson: Add Khadas VIM1S support   Neil Armstrong
• [PATCH] usb: xhci-mvebu: use regulator_set_enable_if_allowed()   Bruno Banelli
• [PATCH] lmb: enable LMB_LIMIT_DMA_BELOW_RAM_TOP for ARCH_MVEBU   Bruno Banelli
• [PATCH] usb: xhci-mvebu: use regulator_set_enable_if_allowed()   Bruno Banelli
• [PATCH v2] usb: xhci-mvebu: use regulator_set_enable_if_allowed()   Bruno Banelli
• [PATCH] usb: xhci-mvebu: use dev_err() instead of printf()   Bruno Banelli
• [PATCH] board: spacemit: k1: accept the "m1-x_" TLV product name prefix   Bruno Banelli
• [PATCH] arm: mvebu: armada8k: do not offer the ATF/TEE region as free memory   Bruno Banelli
• [PATCH] net: lwip: fix TFTP blocksize threshold check   Padmarao Begari
• [PATCH] net: lwip: fix TFTP blocksize threshold check   Begari, Padmarao
• [PATCH 0/8] net: mrmac: Fix Rx packet loss on back-to-back frames   Padmarao Begari
• [PATCH 1/8] net: mrmac: check memalign() return values   Padmarao Begari
• [PATCH 2/8] net: mrmac: use a driver-owned RX buffer pool   Padmarao Begari
• [PATCH 3/8] net: mrmac: switch to max-speed property   Padmarao Begari
• [PATCH 4/8] net: mrmac: use contiguous BD arrays   Padmarao Begari
• [PATCH 5/8] net: mrmac: initialize the Rx BD ring in a loop   Padmarao Begari
• [PATCH 6/8] net: mrmac: write CURDESC after ring setup   Padmarao Begari
• [PATCH 7/8] net: mrmac: fix Rx packet loss on back-to-back frames   Padmarao Begari
• [PATCH 8/8] net: mrmac: increase the Rx BD ring   Padmarao Begari
• [PATCH 0/8] net: mrmac: Fix Rx packet loss on back-to-back frames   Begari, Padmarao
• [PATCH v2 0/2] efi_loader: show drive details in the boot menu   Padmarao Begari
• [PATCH v2 1/2] lib: display_options: add snprint_size()   Padmarao Begari
• [PATCH v2 2/2] efi_loader: expand disk device names with drive details   Padmarao Begari
• [PATCH 0/3] soc/board: decouple SoC identification reads from firmware calls   Akshay Belsare
• [PATCH 1/3] soc: xilinx: decouple chip ID retrieval from direct firmware calls   Akshay Belsare
• [PATCH 2/3] soc: xilinx: route PMC TAP register access through firmware   Akshay Belsare
• [PATCH 3/3] board: xilinx: decouple PGGS boot index read from firmware   Akshay Belsare
• [PATCH 0/2] reset: zynqmp: move reset_assert() into firmware driver   Akshay Belsare
• [PATCH 1/2] reset: zynqmp: move reset assert helper into firmware driver   Akshay Belsare
• [PATCH 2/2] board: xilinx: zynqmp: use reset assert helper in reset_cpu()   Akshay Belsare
• Issue found when porting to new device.   Vicente Bergas
• Issue found when porting to new device.   Vicente Bergas
• [PATCH 3/3] x86: emulation: enable cfi flash drivers   Elliot Berman
• [PATCH 2/3] qemu-x86: Wire support for applying capsule updates to pflash   Elliot Berman
• [PATCH 2/3] qemu-x86: Wire support for applying capsule updates to pflash   Elliot Berman
• [0/3] qemu-x86: Wire up EFI capsule updates on pflash   Elliot Berman
• [PATCH v2 0/4] qemu-x86: Wire up EFI capsule updates on pflash   Elliot Berman
• [PATCH v2 1/4] x86: qemu: Describe pflash   Elliot Berman
• [PATCH v2 2/4] x86: qemu: Wire support for applying EFI capsule updates to pflash   Elliot Berman
• [PATCH v2 3/4] x86: emulation: enable cfi flash drivers for DFU   Elliot Berman
• [PATCH v2 4/4] x86: Add qemu documentation for running as flash binary   Elliot Berman
• [PATCH v2] power: regulator: tps65219: Fix LDO selector boundaries   Kumara Bhimeswararao
• [PATCH] arm: mach-k3: j721e: make get_boot_device() available outside xPL   Patryk Biel
• [PATCH v2 0/4] qcom: Add support for SM7125   Erikas Bitovtas
• [PATCH v2 1/4] clk: qcom: Add driver for SC7180 GCC   Erikas Bitovtas
• [PATCH v2 2/4] pinctrl: qcom: add SC7180 pinctrl driver   Erikas Bitovtas
• [PATCH v2 3/4] qcom_defconfig: Enable SC7180 GCC   Erikas Bitovtas
• [PATCH v2 4/4] phy: qcom-qmp-ufs: Add SC7180 support   Erikas Bitovtas
• [PATCH v2 1/4] clk: qcom: Add driver for SC7180 GCC   Erikas Bitovtas
• [PATCH v3 00/11] arm: mach-k3: introduce basic support for the AM62L   Bryan Brattlof
• [PATCH v3 01/11] firmware: scmi: switch to dev_ofnode during bind   Bryan Brattlof
• [PATCH v3 02/11] tools: binman: extend ti_secure_rom to handle op-tee   Bryan Brattlof
• [PATCH v3 03/11] soc: add data to identify the am62lx   Bryan Brattlof
• [PATCH v3 04/11] boot/Kconfig: disable fit post processing for AM62L   Bryan Brattlof
• [PATCH v3 05/11] arm: mach-k3: Add initial am62lx SoC support   Bryan Brattlof
• [PATCH v3 06/11] board: ti: am62lx: add initial board files   Bryan Brattlof
• [PATCH v3 07/11] arm: dts: k3-am62lx: Add binman support   Bryan Brattlof
• [PATCH v3 08/11] configs: am62lx_evm: add initial defconfig   Bryan Brattlof
• [PATCH v3 09/11] doc: ti: k3: fix pygments warning parsing device-tree   Bryan Brattlof
• [PATCH v3 10/11] doc: board: ti: correct path to tcl scripts   Bryan Brattlof
• [PATCH v3 11/11] doc: board: ti: am62lx_evm: add initial docs for the AM62L-EVM   Bryan Brattlof
• [PATCH v3 10/11] doc: board: ti: correct path to tcl scripts   Bryan Brattlof
• [PATCH v3 08/11] configs: am62lx_evm: add initial defconfig   Bryan Brattlof
• [PATCH v4 00/11] arm: mach-k3: introduce basic support for the AM62L   Bryan Brattlof
• [PATCH v4 01/11] firmware: scmi: switch to dev_ofnode during bind   Bryan Brattlof
• [PATCH v4 02/11] tools: binman: extend ti_secure_rom to handle op-tee   Bryan Brattlof
• [PATCH v4 03/11] soc: add data to identify the am62lx   Bryan Brattlof
• [PATCH v4 04/11] boot/Kconfig: disable fit post processing for AM62L   Bryan Brattlof
• [PATCH v4 05/11] arm: mach-k3: Add initial am62lx SoC support   Bryan Brattlof
• [PATCH v4 06/11] board: ti: am62lx: add initial board files   Bryan Brattlof
• [PATCH v4 07/11] arm: dts: k3-am62lx: Add binman support   Bryan Brattlof
• [PATCH v4 08/11] configs: am62lx_evm: add initial defconfig   Bryan Brattlof
• [PATCH v4 09/11] doc: ti: k3: fix pygments warning parsing device-tree   Bryan Brattlof
• [PATCH v4 10/11] doc: board: ti: correct path to tcl scripts   Bryan Brattlof
• [PATCH v4 11/11] doc: board: ti: am62lx_evm: add initial docs for the AM62L-EVM   Bryan Brattlof
• [PATCH v4 07/11] arm: dts: k3-am62lx: Add binman support   Bryan Brattlof
• [PATCH v4 10/11] doc: board: ti: correct path to tcl scripts   Bryan Brattlof
• [PATCH v4 09/11] doc: ti: k3: fix pygments warning parsing device-tree   Bryan Brattlof
• [PATCH v4 08/11] configs: am62lx_evm: add initial defconfig   Bryan Brattlof
• [PATCH v4 06/11] board: ti: am62lx: add initial board files   Bryan Brattlof
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Bryan Brattlof
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Bryan Brattlof
• [PATCH 00/14] board: ti: update and correct files MAINTAINERS entries   Bryan Brattlof
• [PATCH 01/14] board: ti: sort file entries in MAINTAINERS files   Bryan Brattlof
• [PATCH 02/14] board: ti: correct names in MAINTAINERS file   Bryan Brattlof
• [PATCH 03/14] board: ti: am62x: split board variants into separate maintainer entries   Bryan Brattlof
• [PATCH 04/14] board: ti: am64x: split the EVM and SK board entries   Bryan Brattlof
• [PATCH 05/14] board: ti: j721e: split boards into separate maintainer entries   Bryan Brattlof
• [PATCH 06/14] board: ti: j721s2: split boards into separate maintainer entries   Bryan Brattlof
• [PATCH 07/14] board: ti: am62x: add files to MAINTAINERS entries   Bryan Brattlof
• [PATCH 08/14] board: ti: am62ax: update MAINTAINERS entries   Bryan Brattlof
• [PATCH 09/14] board: ti: am62dx: update MAINTAINERS entries   Bryan Brattlof
• [PATCH 10/14] board: ti: am62px: update MAINTAINERS entries   Bryan Brattlof
• [PATCH 11/14] board: ti: j7200: update MAINTAINERS entries   Bryan Brattlof
• [PATCH 12/14] board: ti: j721e: update MAINTAINERS entries   Bryan Brattlof
• [PATCH 13/14] board: ti: j721s2: update MAINTAINERS entries   Bryan Brattlof
• [PATCH 14/14] board: ti: j722s: update the MAINTAINERS entry   Bryan Brattlof
• [PATCH 00/14] board: ti: update and correct files MAINTAINERS entries   Bryan Brattlof
• [PATCH v2] power: regulator: tps65219: Fix LDO selector boundaries   Maarten Brock
• [PATCH v3] power: regulator: tps65219: Fix LDO selector boundaries   Maarten Brock
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Patrice CHOTARD
• [PATCH] ARM: stm32mp2: fix TAMP_FWU_BOOT_IDX_MASK/OFFSET definition   Patrice CHOTARD
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Patrice CHOTARD
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Patrice CHOTARD
• [PATCH] ram: stm32mp1: bound the invalid-argument message in stm32mp1_ddr_subcmd()   Patrice CHOTARD
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Patrice CHOTARD
• [PATCH 1/2] ARM: stm32mp2: fix TAMP_FWU_BOOT_IDX_MASK/OFFSET definition   Patrice CHOTARD
• [PATCH v3] usb: mtu3: wait for TX FIFO to drain before disconnect   Carlo Caione
• [PATCH v3] usb: mtu3: wait for TX FIFO to drain before disconnect   Carlo Caione
• [PATCH v4 1/2] usb: mtu3: support the upstream devicetree binding   Carlo Caione
• [PATCH v5] usb: mtu3: support the upstream devicetree binding   Carlo Caione
• [PATCH v5] usb: mtu3: support the upstream devicetree binding   Carlo Caione
• [PATCH v6 0/3] Add support for the MTU3 upstream devicetree binding   Carlo Caione
• [PATCH v6 1/3] doc: usb: remove obsolete MediaTek MTU3 bindings   Carlo Caione
• [PATCH v6 2/3] usb: mtu3: support the upstream devicetree binding   Carlo Caione
• [PATCH v6 3/3] usb: mtu3: add SPL gadget support   Carlo Caione
• [PATCH v6 3/3] usb: mtu3: add SPL gadget support   Carlo Caione
• [PATCH v7 0/3] Add support for the MTU3 upstream devicetree binding   Carlo Caione
• [PATCH v7 1/3] doc: usb: remove obsolete MediaTek MTU3 bindings   Carlo Caione
• [PATCH v7 2/3] usb: mtu3: support the upstream devicetree binding   Carlo Caione
• [PATCH v7 3/3] usb: mtu3: add SPL support   Carlo Caione
• [PATCH v3 0/6] Add Genio 510 and Genio 700 SPL boot support   Carlo Caione
• [PATCH v4 0/6] Add Genio 510 and Genio 700 SPL boot support   Carlo Caione
• [PATCH v4 1/6] arm: dts: mediatek: prepare Genio 510 and 700 devices for SPL   Carlo Caione
• [PATCH v4 2/6] configs: mt8188: enable eMMC FIT boot from SPL   Carlo Caione
• [PATCH v4 3/6] arm: mediatek: build Genio 510 and 700 boot images with binman   Carlo Caione
• [PATCH v4 4/6] arm: dts: mediatek: support signed Genio 510 and 700 bootloader FIT   Carlo Caione
• [PATCH v4 5/6] arm: dts: mediatek: emit the Genio 510 and 700 BootROM payload   Carlo Caione
• [PATCH v4 6/6] doc: board: mediatek: document Genio 510 and 700 SPL boot   Carlo Caione
• [PATCH v7 3/3] usb: mtu3: add SPL support   Carlo Caione
• [PATCH v4 0/5] Add fastboot to SPL   Carlo Caione
• [PATCH v4 1/5] fastboot: factor out the USB session runner   Carlo Caione
• [PATCH v4 2/5] fastboot: use the common handler for USB reboot   Carlo Caione
• [PATCH v4 3/5] fastboot: make shared configuration checks phase-aware   Carlo Caione
• [PATCH v4 4/5] image: sparse: add phase-aware SPL support   Carlo Caione
• [PATCH v4 5/5] fastboot: add SPL support   Carlo Caione
• [PATCH v7 3/3] usb: mtu3: add SPL support   Carlo Caione
• [PATCH v4 0/5] Add fastboot to SPL   Carlo Caione
• [PATCH v4 0/5] Add fastboot to SPL   Carlo Caione
• [v2,0/5] firmware-owned devicetree for EBBR / SystemReady IR   Carlo Caione
• [PATCH v4 2/6] configs: mt8188: enable eMMC FIT boot from SPL   Carlo Caione
• [PATCH v4 3/6] arm: mediatek: build Genio 510 and 700 boot images with binman   Carlo Caione
• [PATCH v5 0/6] Add Genio 510 and Genio 700 SPL boot support   Carlo Caione
• [PATCH v5 1/6] arm: dts: mediatek: prepare Genio 510 and 700 devices for SPL   Carlo Caione
• [PATCH v5 2/6] configs: mt8188: enable eMMC FIT boot from SPL   Carlo Caione
• [PATCH v5 3/6] arm: mediatek: build Genio 510 and 700 boot images with binman   Carlo Caione
• [PATCH v5 4/6] arm: dts: mediatek: support signed Genio 510 and 700 bootloader FIT   Carlo Caione
• [PATCH v5 5/6] arm: dts: mediatek: emit the Genio 510 and 700 BootROM payload   Carlo Caione
• [PATCH v5 6/6] doc: board: mediatek: document Genio 510 and 700 SPL boot   Carlo Caione
• [PATCH 0/3] Add RITY devicetree preparation support   Carlo Caione
• [PATCH 1/3] arm: mediatek: add RITY devicetree preparation   Carlo Caione
• [PATCH 2/3] arm: mediatek: add RITY devicetree compatibility commands   Carlo Caione
• [PATCH 3/3] arm: mediatek: add bootembedded compatibility command   Carlo Caione
• [PATCH 0/3] Add RITY devicetree preparation support   Carlo Caione
• [PATCH v2 0/3] Add RITY devicetree preparation support   Carlo Caione
• [PATCH v2 1/3] arm: mediatek: add RITY devicetree preparation   Carlo Caione
• [PATCH v2 2/3] arm: mediatek: add RITY devicetree compatibility commands   Carlo Caione
• [PATCH v2 3/3] arm: mediatek: add bootembedded compatibility command   Carlo Caione
• [PATCH v2 0/3] Add RITY devicetree preparation support   Carlo Caione
• [PATCH v2 0/3] Add RITY devicetree preparation support   Carlo Caione
• [security] Report of possible arbitrary memory overwrite in U-Boot's EFI PE/COFF loader (ANT-2026-1K18JRMA)   Arthur Chan
• [security] Report of possible buffer overflow over network in U-Boot's IPv6 receive handler (ANT-2026-9TGZKYM2)   Arthur Chan
• [security] Report of possible buffer overflow in U-Boot lwIP HTTP client (ANT-2026-58CQ0YF9)   Arthur Chan
• [security] Report of possible buffer overflow in U-Boot's SPL (ANT-2026-XCCD0YTT)   Arthur Chan
• [security] Report of possible heap overflow in U-Boot's btrfs driver with a crafted image (ANT-2026-WTTNWC5Y)   Arthur Chan
• [security] Report of possible heap buffer overflow in U-Boot EFI image verification under Secure Boot (ANT-2026-R09Q9YM0)   Arthur Chan
• [security] Report of possible heap overflow in U-Boot EFI TCG2 boot loader (ANT-2026-CBSBSFG8)   Arthur Chan
• [security] Report of possible heap overflow in U-Boot's Android bootmeth before any AVB verification (ANT-2026-ZWED60S8)   Arthur Chan
• [security] Report of possible heap overflow in U-Boot's ZFS reader with crafted ZFS pool (ANT-2026-Q4RB2T4R)   Arthur Chan
• [security] Report of possible global heap overflow in U-Boot's fastboot-over-TCP server by authenticated peer (ANT-2026-5D7F7SAQ)   Arthur Chan
• [security] Report of possible heap overflow in U-Boot's RLE8 BMP decoder (ANT-2026-F8PDVAXY)   Arthur Chan
• [PATCH v2 08/10] rockchip: spl: default to Falcon mode boot in SPL if enabled   Alexey Charkov
• [PATCH] fs: btrfs: report file sizes from readdir   Alexey Charkov
• [PATCH 2/6] disk: part_efi: Add missing endianness conversions   Alexey Charkov
• [PATCH 2/6] disk: part_efi: Add missing endianness conversions   Alexey Charkov
• [PATCH v2 01/10] spl: Decide about Falcon mode boot only once   Alexey Charkov
• [PATCH v2 02/10] spl: atf: support Linux as BL33 with TFA   Alexey Charkov
• [PATCH v2 03/10] spl: ufs: add Falcon mode load path   Alexey Charkov
• [PATCH v2 04/10] binman: Add support for externally provided Linux kernel blob   Alexey Charkov
• [PATCH v2 06/10] binman: Add support for pre-patching FDTs in a FIT with a /chosen node   Alexey Charkov
• [PATCH v2 07/10] binman: tests: Add test coverage for a FIT with embedded Linux+initrd and /chosen   Alexey Charkov
• [PATCH v2 08/10] rockchip: spl: default to Falcon mode boot in SPL if enabled   Alexey Charkov
• [PATCH v2 09/10] rockchip: binman: Add support for Falcon mode FIT images with TF-A+Linux   Alexey Charkov
• [PATCH v2 10/10] doc: falcon: Describe booting the OS through TF-A   Alexey Charkov
• [v2, 00/10] spl: Add support for Falcon mode with ARM Trusted Firmware   Alexey Charkov
• [PATCH 3/4] clk: rockchip: rk3576: Always init clocks in SPL build   Alexey Charkov
• [PATCH] pylibfdt: Grow the FdtSw buffer geometrically   Alexey Charkov
• [PATCH v2 01/10] spl: Decide about Falcon mode boot only once   Alexey Charkov
• [PATCH v2 0/5] clk: rockchip: pll: fixes and simplification of maths in RK3588 frac PLL   Alexey Charkov
• [PATCH] pylibfdt: Grow the FdtSw buffer geometrically   Alexey Charkov
• [PATCH] pylibfdt: Grow the FdtSw buffer geometrically   Alexey Charkov
• [PATCH] pylibfdt: Grow the FdtSw buffer geometrically   Alexey Charkov
• [PATCH v2 0/5] clk: rockchip: pll: fixes and simplification of maths in RK3588 frac PLL   Alexey Charkov
• [PATCH] spi: Handle spi-{tx, rx}-bus-width 0 as SPI_NO_TX/SPI_NO_RX   Alexey Charkov
• [PATCH] spi: rockchip: skip the unused FIFO direction on a one-wire device   Alexey Charkov
• [PATCH v7 5/6] rockchip: doc: add back to ROM section   Alexey Charkov
• [PATCH 0/6] disk: Fix the GPT layout on media with large logical blocks   Alexey Charkov
• [PATCH 00/17] pylibfdt: Update the U-Boot version with changes from upstream dtc   Alexey Charkov
• [PATCH 01/17] pylibfdt: Cast property length to Py_ssize_t   Alexey Charkov
• [PATCH 02/17] pylibfdt: Restore the upstream bytearray() in getprop()   Alexey Charkov
• [PATCH 03/17] pylibfdt: Fix Python crash on getprop deallocation   Alexey Charkov
• [PATCH 04/17] pylibfdt: Add Property.as_stringlist()   Alexey Charkov
• [PATCH 05/17] pylibfdt: Add Property.as_*int*_array()   Alexey Charkov
• [PATCH 06/17] pylibfdt: Add FdtRo.get_path()   Alexey Charkov
• [PATCH 07/17] pylibfdt: Work-around SWIG limitations with flexible arrays   Alexey Charkov
• [PATCH 08/17] pylibfdt: Add size_hint parameter for get_path   Alexey Charkov
• [PATCH 09/17] pylibfdt: Support boolean properties   Alexey Charkov
• [PATCH 10/17] pylibfdt: Fix get_mem_rsv for newer Python versions   Alexey Charkov
• [PATCH 11/17] pylibfdt: Fix backwards compatibility of return values   Alexey Charkov
• [PATCH 12/17] pylibfdt: Fix a typo in the next_node() docstring   Alexey Charkov
• [PATCH 13/17] pylibfdt: Grow the FdtSw buffer geometrically   Alexey Charkov
• [PATCH 14/17] pylibfdt: Add address_cells() and size_cells()   Alexey Charkov
• [PATCH 15/17] pylibfdt: Add add_mem_rsv() and del_mem_rsv()   Alexey Charkov
• [PATCH 16/17] pylibfdt: Document that FdtSw.property() takes bytes   Alexey Charkov
• [PATCH 17/17] dtoc: Add tests for the pylibfdt bindings dtoc does not use   Alexey Charkov
• [PATCH v2 00/13] pxe_utils: small fixups, implement BLS type 1 boot on top of them   Alexey Charkov
• [PATCH v2 01/13] pxe_utils: fix W=1 kernel-doc warnings   Alexey Charkov
• [PATCH v2 02/13] pxe_utils: accept "options" as synonym for "append"   Alexey Charkov
• [PATCH v2 03/13] pxe_utils: harden the "append" parser against malformed input   Alexey Charkov
• [PATCH v2 04/13] pxe_utils: extract per-entry key parsing into parse_label_keys()   Alexey Charkov
• [PATCH v2 05/13] pxe_utils: export per-entry label helpers   Alexey Charkov
• [PATCH v2 06/13] pxe_utils: optionally ignore unknown keys in parse_label_keys()   Alexey Charkov
• [PATCH v2 07/13] pxe_utils: accept "title" inside a label as a synonym for "menu label"   Alexey Charkov
• [PATCH v2 08/13] bootmeth: share the pxelinux getfile helper   Alexey Charkov
• [PATCH v2 09/13] boot: add a minimal bootmeth for the Boot Loader Specification   Alexey Charkov
• [PATCH v2 10/13] test: bootstd: add a BLS entry to the Fedora fixture image   Alexey Charkov
• [PATCH v2 11/13] sandbox: enable BLS boot method   Alexey Charkov
• [PATCH v2 12/13] test: bootstd: cover BLS entries below a prefix   Alexey Charkov
• [PATCH v2 13/13] doc: bootstd: describe the BLS bootmeth   Alexey Charkov
• [PATCH] disk: part_mac: Remove the Apple Partition Map driver   Alexey Charkov
• [PATCH 1/6] disk: part_efi: Size the partition entry array from the block size   Alexey Charkov
• [PATCH 2/6] disk: part_efi: Add missing endianness conversions   Alexey Charkov
• [PATCH 3/6] disk: part_mac: Fix stack corruption on devices with large blocks   Alexey Charkov
• [PATCH 4/6] test: dm: part: Check the GPT layout for large sector sizes   Alexey Charkov
• [PATCH 3/6] disk: part_mac: Fix stack corruption on devices with large blocks   Alexey Charkov
• [PATCH 5/6] test: py: gpt: Bind the disk image in test_gpt_write_part_type()   Alexey Charkov
• [PATCH] test: lib/uuid: Fix endianness for dynamic GUIDs   Alexey Charkov
• [PATCH] test: lib/uuid: Fix endianness for dynamic GUIDs   Alexey Charkov
• [PATCH v2] test: lib/uuid: Fix endianness for dynamic GUIDs   Alexey Charkov
• [PATCH] serial: msm_geni: remove unreachable dead code in pending()   Naveen Kumar Chaudhary
• [PATCH] serial: msm_geni: fix clock rate return type truncation   Naveen Kumar Chaudhary
• [PATCH] serial: lpuart: guard against division-by-zero in setbrg functions   Naveen Kumar Chaudhary
• [PATCH] cmd: setexpr: reject division and modulo by zero   Naveen Kumar Chaudhary
• [PATCH] configs: socfpga_common: Add fatscript env for optional U-Boot script   Chee, Tien Fong
• [PATCH] arm: dts: socfpga_n5x_socdk: Enable watchdog0   Chee, Tien Fong
• [PATCH] configs: socfpga_n5x: Set CONFIG_SYS_LOAD_ADDR to 0x02000000   Chee, Tien Fong
• [PATCH 1/1] arm: socfpga: n5x: Enable system manager driver for N5X   Chee, Tien Fong
• [PATCH] arm: socfpga: n5x: use common soc64 env settings   Chee, Tien Fong
• [GIT PULL] SoCFPGA updates for next (2026-08-17)   Chee, Tien Fong
• [GIT PULL] SoCFPGA updates for next (2026-08-17)   Chee, Tien Fong
• [GIT PULL] SoCFPGA updates for next (2026-08-17)   Chee, Tien Fong
• [GIT PULL] SoCFPGA updates for next (2026-08-17)   Chee, Tien Fong
• [PATCH] arm: dts: socfpga: Add Agilex5 E-Series 013B SoCDK variant   Chee, Tien Fong
• [PATCH] pylibfdt: Replace removed SWIG Python 2 compatibility macros   Jaipaul Cheernam
• [PATCH v4] Add support for OpenSSL Provider API   Jaipaul Cheernam
• [PATCH 0/2] gunzip: Fix spurious Z_BUF_ERROR in chunked gzwrite decompression   Aristo Chen
• [PATCH 1/2] gunzip: Fix spurious Z_BUF_ERROR in chunked gzwrite decompression   Aristo Chen
• [PATCH 2/2] test: cmd: Add gzwrite chunk boundary regression test   Aristo Chen
• [PATCH 2/2] test: cmd: Add gzwrite chunk boundary regression test   Aristo Chen
• [PATCH v2 0/2] gunzip: Fix spurious Z_BUF_ERROR in chunked gzwrite decompression   Aristo Chen
• [PATCH v2 1/2] gunzip: Fix spurious Z_BUF_ERROR in chunked gzwrite decompression   Aristo Chen
• [PATCH v2 2/2] test: cmd: Add gzwrite chunk boundary regression test   Aristo Chen
• [PATCH 0/3] bootm: size the noload buffer from the compressor header   Aristo Chen
• [PATCH 1/3] bootm: size the noload decompression buffer from the compressor header   Aristo Chen
• [PATCH 2/3] test: fit: cover the kernel_noload header-size and lying-header paths   Aristo Chen
• [PATCH 3/3] test: lib: cover image_decomp_get_uncompressed_size() for lzma streams   Aristo Chen
• [PATCH 1/3] bootm: size the noload decompression buffer from the compressor header   Aristo Chen
• [PATCH v1 0/2] bootmeth: efi_mgr: Report EFI boot manager failures to bootflow   Aristo Chen
• [PATCH v1 1/2] bootmeth: efi_mgr: Do not discard the EFI boot manager error   Aristo Chen
• [PATCH v1 2/2] test: boot: Check that efi_mgr boot failures are reported   Aristo Chen
• [PATCH v1 0/7] bootstd: Fix crashes and memory leaks on scan/boot error paths   Aristo Chen
• [PATCH v1 1/7] bootstd: rauc: Fix NULL dereference in get_slot()   Aristo Chen
• [PATCH v1 2/7] bootstd: rauc: Clear bootmeth_priv after freeing it on error   Aristo Chen
• [PATCH v1 3/7] bootstd: rauc: Free string lists on error paths   Aristo Chen
• [PATCH v1 4/7] bootstd: cros: Clear bootmeth_priv after freeing it on error   Aristo Chen
• [PATCH v1 5/7] bootstd: rauc: Fix leak of the strsep() source buffers   Aristo Chen
• [PATCH v1 6/7] bootstd: Free abandoned bootflows while scanning   Aristo Chen
• [PATCH v1 7/7] bootstd: rauc: Clear bootmeth_priv after freeing it when booting   Aristo Chen
• [PATCH 1/3] bootm: size the noload decompression buffer from the compressor header   Aristo Chen
• [PATCH v2 0/8] bootm: size the noload buffer from the compressor header   Aristo Chen
• [PATCH v2 1/8] bootm: size the noload gzip decompression buffer from ISIZE   Aristo Chen
• [PATCH v2 2/8] test: fit: cover the kernel_noload gzip header-size and lying-header paths   Aristo Chen
• [PATCH v2 3/8] bootm: size the noload zstd decompression buffer from Frame_Content_Size   Aristo Chen
• [PATCH v2 4/8] test: fit: cover the kernel_noload zstd header-size path   Aristo Chen
• [PATCH v2 5/8] bootm: size the noload lz4 decompression buffer from Content_Size   Aristo Chen
• [PATCH v2 6/8] test: fit: cover the kernel_noload lz4 header-size path   Aristo Chen
• [PATCH v2 7/8] bootm: size the noload lzma decompression buffer from the header   Aristo Chen
• [PATCH v2 8/8] test: fit: cover the kernel_noload lzma header-size and unknown-size paths   Aristo Chen
• [PATCH v2 0/8] bootm: size the noload buffer from the compressor header   Aristo Chen
• [PATCH 0/2] bootstd: rauc: Fix stack overflow with over-long slot names   Aristo Chen
• [PATCH 1/2] bootstd: rauc: Reject slot names that do not fit the env-var name buffer   Aristo Chen
• [PATCH 2/2] test: boot: Check that rauc rejects over-long slot names   Aristo Chen
• [PATCH 0/4] fs: Add 9P filesystem support over virtio   Kuan-Wei Chiu
• [0/4] fs: Add 9P filesystem support over virtio   Kuan-Wei Chiu
• [PATCH v2 0/6] fs: Add 9P filesystem support over virtio   Kuan-Wei Chiu
• [PATCH v2 1/6] net: 9p: Add 9P2000.L protocol support   Kuan-Wei Chiu
• [PATCH v2 2/6] fs: 9p: Add 9P filesystem support   Kuan-Wei Chiu
• [PATCH v2 3/6] virtio: 9p: Add 9P transport driver   Kuan-Wei Chiu
• [PATCH v2 4/6] doc: 9p: Add 9P filesystem documentation   Kuan-Wei Chiu
• [PATCH v2 5/6] test: 9p: Add test for 9P filesystem   Kuan-Wei Chiu
• [PATCH v2 6/6] MAINTAINERS: Add entry for 9PFS   Kuan-Wei Chiu
• [u-boot-test-hooks][PATCH] travis-ci: Add 9P device support to qemu_arm64   Kuan-Wei Chiu
• [PATCH 0/2] usb: gdaget: f_mass_storage: various fixes   Patrice Chotard
• [PATCH 1/2] usb: gadget: f_mass_storage: Remove useless rc variable   Patrice Chotard
• [PATCH 2/2] usb: gadget: f_mass_storage: Optimize schedule() call   Patrice Chotard
• [PATCH] tools: fwumdata: fix redundant metadata buffer overlap   Patrice Chotard
• [PATCH 0/2] STM32MP: Fix FWU related compilation issues   Patrice Chotard
• [PATCH 1/2] ARM: stm32mp2: fix TAMP_FWU_BOOT_IDX_MASK/OFFSET definition   Patrice Chotard
• [PATCH 2/2] board: st: Fix compilation issue   Patrice Chotard
• [PATCH v8 00/11] spacemit mmc driver   Eric Chung
• [PATCH v8 01/11] spacemit: k1: select boot device via config registers   Eric Chung
• [PATCH v8 02/11] pinctrl: k1: fix drive strength configuration   Eric Chung
• [PATCH v8 03/11] pinctrl: k1: fix pull-up/pull-down configuration   Eric Chung
• [PATCH v8 04/11] pinctrl: k1: add IO power domain configuration support   Eric Chung
• [PATCH v8 05/11] mmc: k1: add sdhci platform driver   Eric Chung
• [PATCH v8 06/11] dts: k1: add SD card support in u-boot overlay   Eric Chung
• [PATCH v8 07/11] configs: k1: enable SD and eMMC support   Eric Chung
• [PATCH v8 08/11] MAINTAINER: update Spacemit K1 entry   Eric Chung
• [PATCH v8 09/11] doc: spacemit: flash on K1 SoC based boards   Eric Chung
• [PATCH v8 10/11] config: k1: enable ENV support for eMMC   Eric Chung
• [PATCH v8 11/11] spacemit: k1: fix product name detection and DTB matching in SPL   Eric Chung
• [PATCH v9 00/19] spacemit mmc driver   Eric Chung
• [PATCH v9 01/19] spacemit: k1: select boot device via config registers   Eric Chung
• [PATCH v9 02/19] pinctrl: k1: fix pull-up/pull-down configuration   Eric Chung
• [PATCH v9 03/19] pinctrl: k1: add IO power domain configuration support   Eric Chung
• [PATCH v9 04/19] mmc: k1: add sdhci platform driver   Eric Chung
• [PATCH v9 05/19] riscv: dts: spacemit: define a SPI controller node   Eric Chung
• [PATCH v9 06/19] riscv: dts: spacemit: k1: add SD card controller and pinctrl support   Eric Chung
• [PATCH v9 07/19] riscv: dts: spacemit: k1-bananapi-f3: add SD card support with UHS modes   Eric Chung
• [PATCH v9 08/19] riscv: dts: spacemit: k1-musepi-pro: add PMIC and power infrastructure   Eric Chung
• [PATCH v9 09/19] riscv: dts: spacemit: k1-musepi-pro: add 24c02 eeprom   Eric Chung
• [PATCH v9 10/19] riscv: dts: spacemit: k1-musepi-pro: enable QSPI and add SPI NOR   Eric Chung
• [PATCH v9 11/19] riscv: dts: spacemit: k1-musepi-pro: enable USB 3 ports   Eric Chung
• [PATCH v9 12/19] riscv: dts: spacemit: k1-musepi-pro: enable PCIe ports   Eric Chung
• [PATCH v9 13/19] riscv: dts: spacemit: k1-musepi-pro: set default console baud rate   Eric Chung
• [PATCH v9 14/19] riscv: dts: spacemit: k1-musepi-pro: add SD card support with UHS modes   Eric Chung
• [PATCH v9 15/19] dts: k1: enable mmc devices in SPL   Eric Chung
• [PATCH v9 16/19] configs: k1: enable SD and eMMC support   Eric Chung
• [PATCH v9 17/19] MAINTAINER: update Spacemit K1 entry   Eric Chung
• [PATCH v9 18/19] doc: spacemit: flash on K1 SoC based boards   Eric Chung
• [PATCH v9 19/19] spacemit: k1: fix product name detection and DTB matching in SPL   Eric Chung
• [PATCH v9 00/19] spacemit mmc driver   Eric Chung
• [PATCH v9 00/19] spacemit mmc driver   Eric Chung
• [PATCH v9 00/19] spacemit mmc driver   Eric Chung
• [PATCH 0/2] pinctrl: fix on Spacemit K1 SoC   Eric Chung
• [PATCH 1/2] pinctrl: k1: fix drive strength configuration   Eric Chung
• [PATCH 2/2] pinctrl: k1: add IO power domain configuration support   Eric Chung
• [PATCH v10 00/17] spacemit mmc driver   Eric Chung
• [PATCH v10 01/17] spacemit: k1: select boot device via config registers   Eric Chung
• [PATCH v10 02/17] mmc: k1: add sdhci platform driver   Eric Chung
• [PATCH v10 03/17] riscv: dts: spacemit: define a SPI controller node   Eric Chung
• [PATCH v10 04/17] riscv: dts: spacemit: k1: add SD card controller and pinctrl support   Eric Chung
• [PATCH v10 05/17] riscv: dts: spacemit: k1-bananapi-f3: add SD card support with UHS modes   Eric Chung
• [PATCH v10 06/17] riscv: dts: spacemit: k1-musepi-pro: add PMIC and power infrastructure   Eric Chung
• [PATCH v10 07/17] riscv: dts: spacemit: k1-musepi-pro: add 24c02 eeprom   Eric Chung
• [PATCH v10 08/17] riscv: dts: spacemit: k1-musepi-pro: enable QSPI and add SPI NOR   Eric Chung
• [PATCH v10 09/17] riscv: dts: spacemit: k1-musepi-pro: enable USB 3 ports   Eric Chung
• [PATCH v10 10/17] riscv: dts: spacemit: k1-musepi-pro: enable PCIe ports   Eric Chung
• [PATCH v10 11/17] riscv: dts: spacemit: k1-musepi-pro: set default console baud rate   Eric Chung
• [PATCH v10 12/17] riscv: dts: spacemit: k1-musepi-pro: add SD card support with UHS modes   Eric Chung
• [PATCH v10 13/17] dts: k1: enable mmc devices in SPL   Eric Chung
• [PATCH v10 14/17] configs: k1: enable SD and eMMC support   Eric Chung
• [PATCH v10 15/17] MAINTAINER: update Spacemit K1 entry   Eric Chung
• [PATCH v10 16/17] doc: spacemit: flash on K1 SoC based boards   Eric Chung
• [PATCH v10 17/17] spacemit: k1: fix product name detection and DTB matching in SPL   Eric Chung
• [PATCH] CI: install python-cryptography for world build   Casey Connolly
• [PATCH v2] CI: add Qualcomm requirements.txt for world build   Casey Connolly
• [RESEND PATCH V2] CI: add Qualcomm requirements.txt for world build   Casey Connolly
• [PULL] Please pull qcom-next   Casey Connolly
• [PATCH 0/2] efi_loader: firmware: decouple dfu_alt_num from image_index   Casey Connolly
• [PATCH v1 1/3] mach-snapdragon: skip redundant SCSI rescan for capsule updates   Casey Connolly
• [PATCH 2/3] tools: qcom: mkmbn: Add support for ipq5210   Casey Connolly
• [PATCH v1 1/2] serial: msm_geni: Skip UART TX when no cable is connected   Casey Connolly
• [PATCH v2] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Casey Connolly
• [PATCH v3] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Casey Connolly
• [PATCH] misc: qcom_geni: fix RX_RFR_WATERMARK to use RX FIFO depth, not width   Casey Connolly
• [PATCH v1 00/14] arm64: qcom: Add initial support for Nord SoC   Casey Connolly
• [PATCH v3 05/11] arm: mach-k3: Add initial am62lx SoC support   Anshul Dalal
• [PATCH v3 06/11] board: ti: am62lx: add initial board files   Anshul Dalal
• [PATCH v3 07/11] arm: dts: k3-am62lx: Add binman support   Anshul Dalal
• [PATCH v3 11/11] doc: board: ti: am62lx_evm: add initial docs for the AM62L-EVM   Anshul Dalal
• [PATCH v3 08/11] configs: am62lx_evm: add initial defconfig   Anshul Dalal
• [PATCH v3 10/11] doc: board: ti: correct path to tcl scripts   Anshul Dalal
• [PATCH v5 00/75] usb: dwc3: sync code with Linux v6.16   Anshul Dalal
• [PATCH v5 00/75] usb: dwc3: sync code with Linux v6.16   Anshul Dalal
• [PATCH v3] fdt: Fix phandles not copying when using templates   Anshul Dalal
• [PATCH v5 00/75] usb: dwc3: sync code with Linux v6.16   Anshul Dalal
• [PATCH main] arm: dts: k3-am625-beagleplay: add bootph tags to pmic regulators   Anshul Dalal
• [PATCH v3] fdt: Fix phandles not copying when using templates   Anshul Dalal
• [PATCH v7 00/24] usb: dwc3: part 2, make the resynced code work   Anshul Dalal
• [PATCH v7 00/24] usb: dwc3: part 2, make the resynced code work   Anshul Dalal
• [PATCH v3] fdt: Fix phandles not copying when using templates   Anshul Dalal
• [PATCH v3] fdt: Fix phandles not copying when using templates   Anshul Dalal
• [PATCH] pylibfdt: Replace removed SWIG Python 2 compatibility macros   Jérémie Dautheribes
• [PATCH 0/5] binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Jérémie Dautheribes
• [0/5] binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Jérémie Dautheribes
• [PATCH 4/5] doc: imx: ahab: add i.MX93 secure boot guide   Jérémie Dautheribes
• [PATCH v3 10/11] doc: board: ti: correct path to tcl scripts   Andrew Davis
• [PATCH v5] video: add ChipWealth CH13726A AMOLED panel driver   Advait Dhamorikar
• [PATCH v2 6/7] MAINTAINERS: Removed files   Tony Dinh
• [PATCH v1 0/3] board: toradex: *-imx95: add support for Quickboot autosave in SPL   Francesco Dolcini
• [PATCH] toradex: select EVENT for TDX_CFG_BLOCK   Francesco Dolcini
• colibri_vf: CONFIG_TEXT_BASE and the Toradex eBoot flashing path   Francesco Dolcini
• [PATCH] toradex: apalis-imx8: select QP/QM device tree from OTP fuse   Francesco Dolcini
• [PATCH 1/2] colibri_vf: restore the pre-2017 text base, the BootROM refuses the low one   Francesco Dolcini
• [PATCH 2/2] doc: board: toradex: add the Colibri VF50/VF61 page   Francesco Dolcini
• [PATCH 0/8] toradex: Decouple from Toradex product ID table   Francesco Dolcini
• [PATCH] configs: toradex-smarc-imx8mp: enable SPL_SYS_MMCSD_RAW_MODE   Francesco Dolcini
• [PATCH v1 0/2] Cleanup i.MX95 based Toradex boards   Francesco Dolcini
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Francesco Dolcini
• [PATCH] doc: board: toradex: colibri_vf: flash u-boot-nand.imx, not the plain image   Francesco Dolcini
• [PATCH v1] env: Fix compile error for envtools   Hendrik Donner
• [PATCH] riscv: mpfs: Read and store FPGA design information on MPFS hardware.   Conor Dooley
• [PATCH v2] riscv: mpfs: Read and store FPGA design information on MPFS hardware.   Conor Dooley
• [PATCH 2/2] Clean up emails from non-existing domains   Angelo Dureghello
• [PATCH 2/2] Clean up emails from non-existing domains   Angelo Dureghello
• [PATCH 2/2] Clean up emails from non-existing domains   Angelo Dureghello
• [PATCH] fix non-existing sysam.it domain   Angelo Dureghello
• [PATCH] configs: sc598-som-ezlite: select EV-SOMCRR-EZLITE carrier   Ozan Durgut
• [PATCH 1/2] fdt_support: Add /chosen/bootsource fixup   Wadim Egorov
• [PATCH 2/2] arm: mach-k3: am62x: Implement bootsource_get_ofpath()   Wadim Egorov
• [PATCH 1/2] fdt_support: Add /chosen/bootsource fixup   Wadim Egorov
• [PATCH v1 0/3] board: toradex: *-imx95: add support for Quickboot autosave in SPL   Stefan Eichenberger
• [PATCH v1 1/3] board: toradex: verdin-imx95: add SPL quick boot autosave support   Stefan Eichenberger
• [PATCH v1 2/3] board: toradex: smarc-imx95: add SPL quick boot autosave support   Stefan Eichenberger
• [PATCH v1 3/3] board: toradex: aquila-imx95: add SPL quick boot autosave support   Stefan Eichenberger
• [PATCH] configs: toradex-smarc-imx8mp: enable SPL_SYS_MMCSD_RAW_MODE   Stefan Eichenberger
• [PATCH v1 0/2] Cleanup i.MX95 based Toradex boards   Stefan Eichenberger
• [PATCH v1 1/2] configs: {aquila, verdin, toradex-smarc}-imx95: remove CONFIG_SPI   Stefan Eichenberger
• [PATCH v1 2/2] imx: verdin-imx95: remove unused WDOG_BASE_ADDR   Stefan Eichenberger
• [PATCH v1] toradex: {aquila, smarc, verdin}-imx95: add board_fix_fdt   Stefan Eichenberger
• [PATCH v1 0/6] usb: fix DWC3/gadget issues and enable USB on Toradex i.MX95 boards   Stefan Eichenberger
• [PATCH v1 1/6] usb: dwc3: core: only provide legacy gadget IRQ handler when USB_DWC3_GADGET   Stefan Eichenberger
• [PATCH v1 2/6] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Stefan Eichenberger
• [PATCH v1 3/6] usb: skip host-only devices when picking the ehci gadget controller   Stefan Eichenberger
• [PATCH v1 4/6] configs: verdin-imx95: enable CI_UDC usb gadget driver   Stefan Eichenberger
• [PATCH v1 5/6] toradex: verdin-imx95: enable DWC3 USB controller support   Stefan Eichenberger
• [PATCH v1 6/6] toradex: smarc-imx95: enable DWC3 USB controller support   Stefan Eichenberger
• [PATCH v1] toradex: {aquila, smarc, verdin}-imx95: add board_fix_fdt   Stefan Eichenberger
• [PATCH v1 1/6] usb: dwc3: core: only provide legacy gadget IRQ handler when USB_DWC3_GADGET   Stefan Eichenberger
• [PATCH v1 3/6] usb: skip host-only devices when picking the ehci gadget controller   Stefan Eichenberger
• [PATCH v1 2/6] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Stefan Eichenberger
• [PATCH v1] toradex: {aquila, smarc, verdin}-imx95: add board_fix_fdt   Stefan Eichenberger
• [PATCH v1 1/6] usb: dwc3: core: only provide legacy gadget IRQ handler when USB_DWC3_GADGET   Stefan Eichenberger
• [PATCH 0/5] binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Jérémie Dautheribes (Schneider Electric)
• [PATCH 1/5] tools: binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Jérémie Dautheribes (Schneider Electric)
• [PATCH 2/5] imx93-u-boot: wrap SPL and U-Boot nodes in a CST node if AHAB_BOOT enabled   Jérémie Dautheribes (Schneider Electric)
• [PATCH 3/5] doc: imx: ahab: add AHAB introduction   Jérémie Dautheribes (Schneider Electric)
• [PATCH 4/5] doc: imx: ahab: add i.MX93 secure boot guide   Jérémie Dautheribes (Schneider Electric)
• [PATCH 5/5] binman: test: add code coverage for nxp_imx93cst etype   Jérémie Dautheribes (Schneider Electric)
• [EXT] Re: [PATCH v3] imx: Add FRDM-IMX95 initial support   Fabio Estevam
• Issue found when porting to new device.   Fabio Estevam
• [EXT] Re: [PATCH v3] imx: Add FRDM-IMX95 initial support   Fabio Estevam
• [PATCH v3] binman: nxp_imx8mcst: Handle FCFB header during SPI NOR boot   Fabio Estevam
• [PATCH v3 08/15] omega4-rv1103b: Add the initial support   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-main-20260807   Fabio Estevam
• [EXT] Re: [PATCH v3] imx: Add FRDM-IMX95 initial support   Fabio Estevam
• [PATCH v4 3/4] rockchip: rk3399: Add ROC-PC-PLUS board detection   Fabio Estevam
• [PATCH v4 3/4] rockchip: rk3399: Add ROC-PC-PLUS board detection   Fabio Estevam
• [PATCH v5 1/4] mtd: spi-nor-ids: Add XMC XM25QH128C   Fabio Estevam
• [PATCH v5 2/4] rockchip: rk3399: Remove ROC-PC regulator overrides   Fabio Estevam
• [PATCH v5 3/4] rockchip: rk3399: Add ROC-PC-PLUS board detection   Fabio Estevam
• [PATCH v5 4/4] rockchip: roc-pc-rk3399: Enable redundant environment   Fabio Estevam
• [PATCH v6 1/4] mtd: spi-nor-ids: Add XMC XM25QH128C   Fabio Estevam
• [PATCH v6 2/4] rockchip: rk3399: Remove ROC-PC regulator overrides   Fabio Estevam
• [PATCH v6 3/4] rockchip: rk3399: Add ROC-PC-PLUS board detection   Fabio Estevam
• [PATCH v6 4/4] rockchip: roc-pc-rk3399: Enable redundant environment   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-next-20260807   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-next-20260807   Fabio Estevam
• [PATCH] arm64: dts: imx: Fix EEPROM address on Data Modul i.MX8M Plus eDM SBC   Fabio Estevam
• prep work for submitting Draeger imx6-ralated patches   Fabio Estevam
• [PATCH] arm64: dts: imx: Fix EEPROM address on Data Modul i.MX8M Plus eDM SBC   Fabio Estevam
• Re: [PATCH v1 1/1] arm: draeger: Dräger M48 on NXP i.MX6(Q) and Intel/Altera SoCFPGA Cyclone V devicetree.   Fabio Estevam
• [PATCH 0/7] Add support for the NXP MR-NAVQ95 board   Fabio Estevam
• Re: [PATCH v1 1/1] arm: draeger: Dräger M48 on NXP i.MX6(Q) and Intel/Altera SoCFPGA Cyclone V devicetree.   Fabio Estevam
• Re: [PATCH v1 1/1] arm: draeger: Dräger M48 on NXP i.MX6(Q) and Intel/Altera SoCFPGA Cyclone V devicetree.   Fabio Estevam
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Fabio Estevam
• [PATCH v1] toradex: {aquila, smarc, verdin}-imx95: add board_fix_fdt   Fabio Estevam
• [EXT] Re: [PATCH 0/7] Add support for the NXP MR-NAVQ95 board   Fabio Estevam
• [PATCH v1] toradex: {aquila, smarc, verdin}-imx95: add board_fix_fdt   Fabio Estevam
• [PATCH 0/2] sc59x: Disable CONFIG_EFI_LOADER   Caleb Ethridge
• [PATCH 1/2] configs: adi: sc598: disable CONFIG_EFI_LOADER   Caleb Ethridge
• [PATCH 2/2] configs: adi: sc594: disable CONFIG_EFI_LOADER   Caleb Ethridge
• [RESEND PATCH 0/2] sc59x: Disable CONFIG_EFI_LOADER   Caleb Ethridge
• [RESEND PATCH 1/2] configs: adi: sc598: disable CONFIG_EFI_LOADER   Caleb Ethridge
• [RESEND PATCH 2/2] configs: adi: sc594: disable CONFIG_EFI_LOADER   Caleb Ethridge
• [PATCH 0/2] sc59x: Disable CONFIG_EFI_LOADER   Caleb Ethridge
• [GIT PULL] Please pull fsl-qoriq-for-2026.10-rc3 for main   Peng Fan
• [PATCH] MAINTAINERS: mmc: Add myself as a reviewer   Peng Fan
• [PATCH v1] spi: fsl_dspi: match the Layerscape DSPI compatibles   Peng Fan
• [PATCH v1] net: ldpaa_eth: fix error logics of unconfigured DPMACs   Peng Fan
• [PATCH v1] power: regulator: mpq8785: match the MPS MPQ8646   Peng Fan
• [PATCH 5/6] common: kconfig: raise SYS_CBSIZE default to 1024 for FSL_LSCH2/LSCH3   Peng Fan
• [PATCH v6 04/13] power: regulator: Add driver voltage clamp callback   Peng Fan
• [PATCH v6 07/13] power: regulator: Add AB8500 AUX3 support   Peng Fan
• [PATCH v6 02/13] mmc: arm_pl180: Configure Ux500 signal direction   Peng Fan
• [PATCH v6 03/13] mmc: arm_pl180: Gate idle card clocks   Peng Fan
• [PATCH v6 05/13] mmc: arm_pl180: Set initial supply voltages   Peng Fan
• [PATCH v6 06/13] mmc: arm_pl180: Power down card supplies at OS handoff   Peng Fan
• [PATCH v2 4/5] mmc: Call back to optee after a successful mmc_init   Peng Fan
• [PATCH v2 5/5] mmc: Make "MMC Device not found" a debug output   Peng Fan
• [PATCH 1/2] rtc: ds1307: support register offsets   Alexander Feilke
• [PATCH 2/2] rtc: ds1307: add initial support for EPSON RX8025   Alexander Feilke
• [PATCH 0/2] vf610: fix GPIO output and console input   Mehmet Fide
• [PATCH 1/2] gpio: vybrid: read and write the GPIO block, not the PORT block   Mehmet Fide
• [PATCH 2/2] serial: lpuart: test the receive flag, not the FIFO counter   Mehmet Fide
• colibri_vf: CONFIG_TEXT_BASE and the Toradex eBoot flashing path   Mehmet Fide
• [PATCH v2 0/2] cmd: allow bootd without bootm   Mehmet Fide
• [PATCH v2 1/2] cmd: allow bootd without bootm   Mehmet Fide
• [PATCH v2 2/2] test: cmd: add a test for bootd   Mehmet Fide
• [PATCH] toradex: select EVENT for TDX_CFG_BLOCK   Mehmet Fide
• [PATCH 0/2] colibri_vf: fix NAND boot and add the board documentation   Mehmet Fide
• [PATCH 1/2] colibri_vf: restore the pre-2017 text base, the BootROM refuses the low one   Mehmet Fide
• [PATCH 2/2] doc: board: toradex: add the Colibri VF50/VF61 page   Mehmet Fide
• colibri_vf: CONFIG_TEXT_BASE and the Toradex eBoot flashing path   Mehmet Fide
• [PATCH 1/2] colibri_vf: restore the pre-2017 text base, the BootROM refuses the low one   Mehmet Fide
• [PATCH v2 0/2] colibri_vf: fix NAND boot and add the board documentation   Mehmet Fide
• [PATCH v2 1/2] colibri_vf: restore the pre-2017 text base, the BootROM refuses the low one   Mehmet Fide
• [PATCH v2 2/2] doc: board: toradex: add the Colibri VF50/VF61 page   Mehmet Fide
• [PATCH v2 2/2] test: cmd: add a test for bootd   Mehmet Fide
• [PATCH v3 1/2] cmd: allow bootd without bootm   Mehmet Fide
• [PATCH v3 2/2] test: cmd: add a test for bootd   Mehmet Fide
• [PATCH] usb: ehci-vf: take the controller index from the device tree   Mehmet Fide
• [PATCH 0/3] usb: ehci-vf: take the register bases from the device tree   Mehmet Fide
• [PATCH 1/3] usb: ehci-vf: remove the code path for a build without DM_USB   Mehmet Fide
• [PATCH 2/3] usb: ehci-vf: drop the empty bind hook   Mehmet Fide
• [PATCH 3/3] usb: ehci-vf: take the register bases from the device tree   Mehmet Fide
• [PATCH 0/2] vf610: make the USB host port usable   Mehmet Fide
• [PATCH 1/2] dm: core: read the device tree into plat data after pinctrl   Mehmet Fide
• [PATCH 2/2] usb: ehci-vf: enable the vbus supply of the port   Mehmet Fide
• [PATCH v2 0/4] usb: ehci-vf: take the register bases from the device tree   Mehmet Fide
• [PATCH v2 1/4] usb: ehci-vf: remove the code path for a build without DM_USB   Mehmet Fide
• [PATCH v2 2/4] usb: ehci-vf: drop the empty bind hook   Mehmet Fide
• [PATCH v2 3/4] dm: core: add ofnode_get_alias_seq()   Mehmet Fide
• [PATCH v2 4/4] usb: ehci-vf: take the register bases from the device tree   Mehmet Fide
• [PATCH v2 0/2] vf610: make the USB host port usable   Mehmet Fide
• [PATCH v2 1/2] dm: core: read the device tree into plat data after pinctrl   Mehmet Fide
• [PATCH v2 2/2] usb: ehci-vf: enable the vbus supply of the port   Mehmet Fide
• [PATCH v3 0/2] vf610: make the USB host port usable   Mehmet Fide
• [PATCH v3 1/2] dm: core: read the device tree into plat data after pinctrl   Mehmet Fide
• [PATCH v3 2/2] usb: ehci-vf: enable the vbus supply of the port   Mehmet Fide
• [PATCH v2 0/4] usb: ehci-vf: take the register bases from the device tree   Mehmet Fide
• [PATCH 1/2] dm: core: read the device tree into plat data after pinctrl   Mehmet Fide
• [PATCH 0/4] dm: gpio: read GPIOs in of_to_plat(), request them in probe()   Mehmet Fide
• [PATCH 1/4] gpio: add a way to parse a GPIO now and request it later   Mehmet Fide
• [PATCH 2/4] regulator: claim the enable GPIO at probe time, not in of_to_plat()   Mehmet Fide
• [PATCH 3/4] doc: driver-model: state that of_to_plat() must not probe or claim   Mehmet Fide
• [PATCH 4/4] test: dm: check the fixed regulator claims its GPIO at probe time   Mehmet Fide
• [PATCH] doc: board: toradex: colibri_vf: flash u-boot-nand.imx, not the plain image   Mehmet Fide
• [PATCH next v1] net: rtl8169: add support for RTL8126A and RTL8127A   Jerome Forissier
• [PATCH next v1] net: rtl8169: add support for RTL8126A and RTL8127A   Jerome Forissier
• [PATCH] net: lwip: fix TFTP blocksize threshold check   Jerome Forissier
• [PATCH 1/2] net: nfs: clean up bounds checks in nfs_readlink_reply()   Jerome Forissier
• [PATCH 2/2] net: nfs: reject negative rlen in nfs_read_reply()   Jerome Forissier
• [PATCH 1/2] net: dhcp6: prevent an infinite loop parsing IA options   Jerome Forissier
• [PATCH 2/3] net: lwip: wget: free the transfer context after an aborted request   Jerome Forissier
• [PATCH 2/2] test: dm: nfs: add a regression test for an oversized NFS read length   Jerome Forissier
• [PATCH] net: lwip: dhcp: fix DHCP fine timer interval   Jerome Forissier
• [PATCH 2/2] test: dm: eth: add DHCPv6 oversized option regression tests   Jerome Forissier
• [PATCH] net: srand_mac(): fix -ENODEV crash with CONFIG_DM_RNG   Jerome Forissier
• [PATCH 1/2] net: dhcp6: prevent an infinite loop parsing IA options   Jerome Forissier
• Please pull net-20260813   Jerome Forissier
• [PATCH 2/2] test: dm: nfs: add a regression test for an oversized NFS read length   Jerome Forissier
• [PATCH] net: net6: validate IPv6 payload and UDP length on receive   Jerome Forissier
• [PATCH v2 0/3] net: nfs: bound server-supplied lengths in READ and READLINK replies   Jerome Forissier
• [PATCH v2 1/3] net: lwip: wget: return ERR_ABRT after aborting the connection   Jerome Forissier
• [PATCH v2 3/3] net: lwip: dns: free the callback context after an aborted lookup   Jerome Forissier
• [PATCH v2 2/3] net: lwip: wget: free the transfer context after an aborted request   Jerome Forissier
• [PATCH 0/2] net: dhcp6: fix out-of-bounds access in the option parser   Jerome Forissier
• [PATCH v2 2/3] net: lwip: wget: free the transfer context after an aborted request   Jerome Forissier
• [PATCH v1] net: bootp: bound DHCP option parsing by the received packet length   Jerome Forissier
• [PATCH] dhcpv6: support rapid commit dhcp6 option   Jerome Forissier
• [PATCH v3 0/3] net: nfs: bound server-supplied lengths in READ and READLINK replies   Jerome Forissier
• [PATCH 1/3] configs: add semi-falcon mode fragment for k3 devices   Francis, Neha
• [PATCH 2/3] arm: k3-binman: add tisemifalcon.bin for semi-falcon mode   Francis, Neha
• [PATCH v2 0/2] board: sophgo: add support for Milk-V Duo 256M   Hiago De Franco
• [PATCH v2 0/2] board: sophgo: add support for Milk-V Duo 256M   Hiago De Franco
• [PATCH v2 0/2] fs/squashfs: fix directory table integer overflow   Richard GENOUD
• [PATCH v1 0/2] fs/squashfs: bounds checks on image-controlled offsets   Richard GENOUD
• [PATCH 2/2] pinctrl: spacemit: k3: add K3 pin support   Bo Gan
• [PATCH v3 2/2] usb: gadget: Add Renesas RZ/N1 USBF controller support   Romain Gantois
• [PATCH v2 1/8] pinctrl: Add compact Nomadik pin controller   Stephan Gerhold
• [PATCH v2 2/8] mmc: arm_pl180: Configure Ux500 signal direction   Stephan Gerhold
• [PATCH v2 3/8] mmc: arm_pl180: Set initial supply voltages   Stephan Gerhold
• [PATCH v2 4/8] power: regulator: Add AB8500 AUX3 support   Stephan Gerhold
• [PATCH v2 5/8] configs: stemmy: Enable SD card regulators   Stephan Gerhold
• [PATCH v2 6/8] configs: stemmy: Boot EFI from external SD card   Stephan Gerhold
• [PATCH v2 7/8] arm: u8500: Switch Stemmy to upstream Janice device tree   Stephan Gerhold
• [PATCH v2 8/8] arm: u8500: Give Golden panel regulators unique names   Stephan Gerhold
• [PATCH v2 7/8] arm: u8500: Switch Stemmy to upstream Janice device tree   Stephan Gerhold
• [PATCH v5 01/13] pinctrl: Add compact Nomadik pin controller   Stephan Gerhold
• [PATCH v5 03/13] mmc: arm_pl180: Gate idle card clocks   Stephan Gerhold
• [PATCH v5 06/13] mmc: arm_pl180: Power down card supplies at OS handoff   Stephan Gerhold
• [PATCH v5 07/13] power: regulator: Add AB8500 AUX3 support   Stephan Gerhold
• [PATCH v5 09/13] configs: stemmy: Boot EFI from external SD card   Stephan Gerhold
• [PATCH v5 10/13] arm: u8500: Switch Stemmy to upstream Janice device tree   Stephan Gerhold
• [PATCH v5 13/13] arm: u8500: Package Stemmy device trees in FIT   Stephan Gerhold
• [PATCH v5 06/13] mmc: arm_pl180: Power down card supplies at OS handoff   Stephan Gerhold
• [PATCH 1/3] x86: qemu: Describe pflash   Simon Glass
• [PATCH 2/3] qemu-x86: Wire support for applying capsule updates to pflash   Simon Glass
• [PATCH 3/3] x86: emulation: enable cfi flash drivers   Simon Glass
• [0/3] qemu-x86: Wire up EFI capsule updates on pflash   Simon Glass
• [PATCH v4 3/7] binman: Fix FIT image overlap issues for testFitSplitElf   Simon Glass
• [PATCH v4 6/7] test: fit: cover mkimage load address overlap detection   Simon Glass
• [PATCH v4 7/7] binman: fit: document how ELF load addresses are determined   Simon Glass
• [PATCH v2 01/10] spl: Decide about Falcon mode boot only once   Simon Glass
• [PATCH v2 02/10] spl: atf: support Linux as BL33 with TFA   Simon Glass
• [PATCH v2 03/10] spl: ufs: add Falcon mode load path   Simon Glass
• [PATCH v2 04/10] binman: Add support for externally provided Linux kernel blob   Simon Glass
• [PATCH v2 05/10] binman: Add support for externally provided Linux initrd blob   Simon Glass
• [PATCH v2 06/10] binman: Add support for pre-patching FDTs in a FIT with a /chosen node   Simon Glass
• [PATCH v2 07/10] binman: tests: Add test coverage for a FIT with embedded Linux+initrd and /chosen   Simon Glass
• [PATCH v2 08/10] rockchip: spl: default to Falcon mode boot in SPL if enabled   Simon Glass
• [PATCH v2 09/10] rockchip: binman: Add support for Falcon mode FIT images with TF-A+Linux   Simon Glass
• [PATCH v2 10/10] doc: falcon: Describe booting the OS through TF-A   Simon Glass
• [v2, 00/10] spl: Add support for Falcon mode with ARM Trusted Firmware   Simon Glass
• [PATCH 1/6] disk: part_efi: Size the partition entry array from the block size   Simon Glass
• [PATCH 2/6] disk: part_efi: Add missing endianness conversions   Simon Glass
• [PATCH 3/6] disk: part_mac: Fix stack corruption on devices with large blocks   Simon Glass
• [PATCH 4/6] test: dm: part: Check the GPT layout for large sector sizes   Simon Glass
• [PATCH 5/6] test: py: gpt: Bind the disk image in test_gpt_write_part_type()   Simon Glass
• [PATCH 6/6] test: py: gpt: Test the GPT layout on a device with 4096-byte blocks   Simon Glass
• [PATCH] buildman: Differentiate 32-bit and 64-bit LoongArch variants   Simon Glass
• [00/36] clk: port Linux Common Clock Framework to U-Boot   Simon Glass
• [PATCH 2/3] qemu-x86: Wire support for applying capsule updates to pflash   Simon Glass
• [PATCH v2 09/10] rockchip: binman: Add support for Falcon mode FIT images with TF-A+Linux   Simon Glass
• [v2, 00/10] spl: Add support for Falcon mode with ARM Trusted Firmware   Simon Glass
• [PATCH 0/9] rockchip: Remove unneeded syscon driver for RK35xx   Simon Glass
• merge software ecdsa support   Simon Glass
• [PATCH v6 2/5] binman: x509_cert: document PKCS#11 URI support in keyfile   Simon Glass
• [PATCH v6 3/5] binman: ti_secure: drop the redundant keyfile re-read   Simon Glass
• [PATCH v6 4/5] binman: x509_cert: support PKCS11_PIN environment variable   Simon Glass
• [PATCH v6 5/5] binman: Add BINMAN_X509_KEYFILE to override the signing key   Simon Glass
• [PATCH] pylibfdt: Grow the FdtSw buffer geometrically   Simon Glass
• [PATCH v4 2/9] rockchip: doc: add mask ROM mode text   Simon Glass
• [PATCH v4 5/9] rockchip: tools: rksd: remove reference to README.rockchip   Simon Glass
• [PATCH v4 6/9] rockchip: tools: rkspi: remove reference to README.rockchip   Simon Glass
• [PATCH v4 7/9] rockchip: tools: add comment section to rkimage.c   Simon Glass
• [PATCH v4 8/9] rockchip: doc: rockusb: remove reference to README.rockchip   Simon Glass
• [PATCH v4 9/9] rockchip: doc: remove README.rockchip   Simon Glass
• [PATCH 1/4] image-fit: Use unsigned types for external data properties   Simon Glass
• [PATCH 2/4] test: spl: Factor out external-data FIT property checks   Simon Glass
• [PATCH 4/4] spl: fit: Bound external data like U-Boot proper   Simon Glass
• [PATCH 1/5] lib: div64: fix off-by-one shift in div64_u64() and div64_u64_rem()   Simon Glass
• [PATCH 3/4] spl: fit: Harden external-data offset and size arithmetic   Simon Glass
• [PATCH 2/5] lib: div64: use abs64() for the 64-bit operands of div64_s64()   Simon Glass
• [PATCH 3/5] lib: div64: inline __iter_div_u64_rem() into its only user   Simon Glass
• [PATCH 4/5] lib: div64: sync with Linux v7.1   Simon Glass
• [PATCH 5/5] lib: math64: sync <linux/math64.h> with Linux v7.1   Simon Glass
• [PATCH 1/1] efi: avoid video ghosting in EFI app   Simon Glass
• [PATCH] arm: Backward compatibility to U-Boot v2020.04   Simon Glass
• [PATCH 1/1] lib: correct list_guid[] array   Simon Glass
• [0/5] lib: resync lib/div64.c and <linux/math64.h> with Linux v7.1   Simon Glass
• [PATCH v5] serial: coreboot: Accept DBG2 subtype 0x12   Simon Glass
• [PATCH 1/1] efi: avoid video ghosting in EFI app   Simon Glass
• [PATCH v3 08/15] omega4-rv1103b: Add the initial support   Simon Glass
• [PATCH 2/2] test: cmd: Add gzwrite chunk boundary regression test   Simon Glass
• [PATCH 1/2] cmd: allow bootd without bootm   Simon Glass
• [PATCH 2/2] test: cmd: add a test for bootd   Simon Glass
• [PATCH 1/2] gunzip: Fix spurious Z_BUF_ERROR in chunked gzwrite decompression   Simon Glass
• [PATCH 1/3] test: dm: free gpio in dm_test_gpio_requestf()   Simon Glass
• [PATCH 2/3] test: sandbox: enable GPIO_DELAY   Simon Glass
• [security] Report of possible heap overflow in U-Boot's Android bootmeth before any AVB verification (ANT-2026-ZWED60S8)   Simon Glass
• [PATCH 1/2] dm: improve logging for missing uclass   Simon Glass
• [PATCH 2/2] initcall: display error code on error   Simon Glass
• [PATCH] dm: pci: fix uninitialized fdt_pci_addr fall-through in pci_get_devfn   Simon Glass
• [PATCH v2 1/2] cmd: allow bootd without bootm   Simon Glass
• [PATCH v2 2/2] test: cmd: add a test for bootd   Simon Glass
• [PATCH v3] binman: nxp_imx8mcst: Handle FCFB header during SPI NOR boot   Simon Glass
• [PATCH v4 01/11] firmware: scmi: switch to dev_ofnode during bind   Simon Glass
• [PATCH v4 02/11] tools: binman: extend ti_secure_rom to handle op-tee   Simon Glass
• [PATCH v4 03/11] soc: add data to identify the am62lx   Simon Glass
• [PATCH v4 04/11] boot/Kconfig: disable fit post processing for AM62L   Simon Glass
• [PATCH v4 05/11] arm: mach-k3: Add initial am62lx SoC support   Simon Glass
• [PATCH v4 06/11] board: ti: am62lx: add initial board files   Simon Glass
• [PATCH v4 07/11] arm: dts: k3-am62lx: Add binman support   Simon Glass
• [PATCH v4 08/11] configs: am62lx_evm: add initial defconfig   Simon Glass
• [PATCH v4 09/11] doc: ti: k3: fix pygments warning parsing device-tree   Simon Glass
• [PATCH v4 10/11] doc: board: ti: correct path to tcl scripts   Simon Glass
• [PATCH v4 11/11] doc: board: ti: am62lx_evm: add initial docs for the AM62L-EVM   Simon Glass
• [PATCH 3/3] test: dm: add sandbox coverage for gpio-delay   Simon Glass
• [PATCH v4 06/11] board: ti: am62lx: add initial board files   Simon Glass
• [PATCH v4 09/11] doc: ti: k3: fix pygments warning parsing device-tree   Simon Glass
• [PATCH v4 08/11] configs: am62lx_evm: add initial defconfig   Simon Glass
• [PATCH v2 01/10] spl: Decide about Falcon mode boot only once   Simon Glass
• [PATCH 1/2] dm: improve logging for missing uclass   Simon Glass
• [PATCH 0/9] rockchip: Remove unneeded syscon driver for RK35xx   Simon Glass
• [PATCH] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Simon Glass
• [PATCH 1/5] image: fit: allow IH_OS_OPENSBI in fit_image_load()   Simon Glass
• [PATCH 2/5] common: spl: ram: Add LOAD_FIT_FULL support   Simon Glass
• [PATCH 3/5] spl: fit: Use map_sysmem() with buffers for fdt address   Simon Glass
• [PATCH 4/5] spl: fit: Record loadables to spl_image->fdt_addr   Simon Glass
• [PATCH 5/5] spl: fit: Add test to check loadables   Simon Glass
• [PATCH v2] dm: pci: fix uninitialized fdt_pci_addr fall-through in pci_get_devfn   Simon Glass
• [PATCH v2 1/4] x86: qemu: Describe pflash   Simon Glass
• [PATCH v2 2/4] x86: qemu: Wire support for applying EFI capsule updates to pflash   Simon Glass
• [PATCH v2 3/4] x86: emulation: enable cfi flash drivers for DFU   Simon Glass
• [PATCH v2 4/4] x86: Add qemu documentation for running as flash binary   Simon Glass
• [PATCH] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Simon Glass
• [PATCH 00/15] rockchip: Miscellaneous RK35xx clock fixes   Simon Glass
• [PATCH v2 2/2] test: cmd: Add gzwrite chunk boundary regression test   Simon Glass
• [0/5] RISC-V SPL: fix OpenSBI FULL FIT loading   Simon Glass
• [PATCH v2 1/4] image-fit: Use unsigned types for external data properties   Simon Glass
• [PATCH v2 0/4] fit: Harden handling of external-data properties   Simon Glass
• [PATCH] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Simon Glass
• [PATCH] Makefile: fix dtbs_check target   Simon Glass
• [PATCH] binman: Do not dedent docstrings twice on Python 3.13+   Simon Glass
• [PATCH v4 1/2] tpm: bounds-check the device-reported response length   Simon Glass
• [PATCH v4 2/2] test: tpm: check malformed capability and OIAP responses are rejected   Simon Glass
• [PATCH] bootstd: android: bound the boot image read by its partition size   Simon Glass
• [PATCH] board_f: Make printing reset information optional   Simon Glass
• [PATCH] spl: Fix link when LZMA is enabled without legacy image format support   Simon Glass
• [PATCH] spl: fit: Fill in the image descriptor when skipping a zero-size image   Simon Glass
• [PATCH 1/4] clk: rockchip: rk3568: Always init clocks in SPL build   Simon Glass
• [PATCH 2/4] clk: rockchip: rk3588: Always init clocks in SPL build   Simon Glass
• [PATCH 1/2] board_f: Add verbose DRAM layout print option   Simon Glass
• [PATCH v3] fdt: Fix phandles not copying when using templates   Simon Glass
• [PATCH 2/6] rockchip: rk3506: Update ENV_MEM_LAYOUT_SETTINGS   Simon Glass
• [PATCH 3/6] adc: rockchip-saradc: Add driver data for RK3506   Simon Glass
• [PATCH 4/6] clk: rockchip: rk3506: Fix CLK_SARADC set rate issues   Simon Glass
• [PATCH 5/6] clk: rockchip: rk3506: Use FIELD_PREP_WM16 macro   Simon Glass
• [PATCH 6/6] rockchip: rk3506: Use FIELD_PREP_WM16 macro   Simon Glass
• [PATCH] pytest: fix out of bounds access to bad_pattern_ids   Simon Glass
• [PATCH 11/11] spl: Use CONFIG_IS_ENABLED() for LIBCOMMON_SUPPORT checks   Simon Glass
• [PATCH v2 1/5] gpio: uclass: log when a gpio offset is already claimed   Simon Glass
• [PATCH v2 2/5] gpio: cmd: warn when a gpio offset is already claimed   Simon Glass
• [PATCH v2 5/5] gpio: delay: free wrapped real GPIOs on remove   Simon Glass
• [v2,0/5] gpio: improve claim diagnostics and fix gpio-delay offset handling   Simon Glass
• [PATCH v2] tools: fit: sign all config image references   Simon Glass
• [PATCH] board_f: Call initf_malloc() before fdtdec_setup()   Simon Glass
• [PATCH] pylibfdt: Grow the FdtSw buffer geometrically   Simon Glass
• [PATCH 1/4] clk: rockchip: rk3568: Always init clocks in SPL build   Simon Glass
• [PATCH 3/6] adc: rockchip-saradc: Add driver data for RK3506   Simon Glass
• [PATCH 4/6] clk: rockchip: rk3506: Fix CLK_SARADC set rate issues   Simon Glass
• [PATCH] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Simon Glass
• [PATCH 2/2] arm64: renesas: Enable verbose DRAM layout print on Renesas R-Car X5H R8A78000   Simon Glass
• [PATCH v2 1/5] efi_loader: bootmgr: preserve a passed devicetree   Simon Glass
• [PATCH 1/6] rockchip: rk3506: Imply OF_UPSTREAM   Simon Glass
• [PATCH 3/4] clk: rockchip: rk3576: Always init clocks in SPL build   Simon Glass
• [PATCH] net: srand_mac(): fix -ENODEV crash with CONFIG_DM_RNG   Simon Glass
• [PATCH] board_f: Call initf_malloc() before fdtdec_setup()   Simon Glass
• [PATCH] board_f: Call initf_malloc() before fdtdec_setup()   Simon Glass
• [PATCH] global_data: Only include driver model fields when DM is enabled   Simon Glass
• [PATCH v3 6/6] gpio: delay: free already-requested GPIOs on probe failure   Simon Glass
• [PATCH v6 6/6] rockchip: doc: add notes section   Simon Glass
• [PATCH v6 5/6] rockchip: doc: add back to ROM section   Simon Glass
• [PATCH 1/5] tools: binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Simon Glass
• [PATCH 2/5] imx93-u-boot: wrap SPL and U-Boot nodes in a CST node if AHAB_BOOT enabled   Simon Glass
• [PATCH 3/5] doc: imx: ahab: add AHAB introduction   Simon Glass
• [PATCH 4/5] doc: imx: ahab: add i.MX93 secure boot guide   Simon Glass
• [PATCH 5/5] binman: test: add code coverage for nxp_imx93cst etype   Simon Glass
• [PATCH v7 05/15] lib: rsa: internalize PKCS#1 DigestInfo prefixes   Simon Glass
• [PATCH v7 06/15] crypto: hash: support hardware-only progressive hashing   Simon Glass
• [0/5] binman: add nxp_imx93cst etype for i.MX93 flash.bin signing   Simon Glass
• [PATCH RESEND v2 1/5] watchdog: wdt-uclass: report effective timeout in start print   Simon Glass
• [PATCH RESEND v2 2/5] watchdog: sbsa_gwdt: set max_timeout_ms in probe   Simon Glass
• [PATCH RESEND v2 3/5] watchdog: octeontx_wdt: set max_timeout_ms in probe   Simon Glass
• [PATCH RESEND v2 4/5] watchdog: sandbox_wdt: set max_timeout_ms in probe   Simon Glass
• [PATCH RESEND v2 5/5] test: wdt: add a test for max_timeout_ms   Simon Glass
• [RESEND,v2,0/5] watchdog: report effective timeout   Simon Glass
• [PATCH 1/3] bootm: size the noload decompression buffer from the compressor header   Simon Glass
• [PATCH v2 3/5] bootmeth: efi: use the firmware-owned devicetree   Simon Glass
• [PATCH v2 4/5] efi_loader: bootmgr: install the firmware-owned devicetree   Simon Glass
• [PATCH v2 2/5] boot: add a firmware-owned devicetree source   Simon Glass
• [PATCH v2 5/5] test: boot: add firmware-FDT source tests   Simon Glass
• [v2,0/5] firmware-owned devicetree for EBBR / SystemReady IR   Simon Glass
• [PATCH 1/2] dm: improve logging for missing uclass   Simon Glass
• [PATCH v1 0/2] reset: small cleanups for x86   Simon Glass
• [PATCH v3 4/5] CI: Add an sjg-lab job for the Intel Edison   Simon Glass
• [PATCH v3 3/4] spl: fit: Harden external-data offset and size arithmetic   Simon Glass
• [PATCH 1/8] reboot-mode: parse up to 3 magic cells per mode   Simon Glass
• [PATCH 2/8] reboot-mode: add trigger op and request/list helpers   Simon Glass
• [PATCH 3/8] reboot-mode: add PSCI reboot-mode driver   Simon Glass
• [PATCH 4/8] cmd: reset: dispatch named reset modes via the reboot-mode framework   Simon Glass
• [PATCH 5/8] arm64: dts: qcom: add psci reboot-mode edl node for lemans/qcs6490-rb3gen2   Simon Glass
• [PATCH 6/8] configs: qcom: enable PSCI reboot-mode framework   Simon Glass
• [PATCH 7/8] test: dm: reboot-mode: test trigger dispatch and mode enumeration   Simon Glass
• [PATCH 8/8] doc: usage: reset: document device-tree-driven reset modes   Simon Glass
• [PATCH v2] x86: cpu: x86_64: Detect CPU vendor and device ID using cpuid   Simon Glass
• [PATCH v1 00/23] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A)   Simon Glass
• [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth.   Simon Glass
• [PATCH v1 2/2] boot: android: Add AVB verification support for different bootflow.   Simon Glass
• [PATCH 1/1] disk: drop Amiga partition table support   Simon Glass
• [v2,0/5] firmware-owned devicetree for EBBR / SystemReady IR   Simon Glass
• [PATCH v1 1/3] lib: aes: reject a ciphertext length that is not a whole number of blocks   Simon Glass
• [PATCH v1 2/3] image-fit: check the length of the data-size-unciphered property   Simon Glass
• [PATCH v1 3/3] lib: aes: reject an unciphered size larger than the ciphertext   Simon Glass
• [v1,0/3] fit: cipher: bounds checks on the ciphered image path   Simon Glass
• [PATCH 1/2] dm: core: read the device tree into plat data after pinctrl   Simon Glass
• [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth.   Simon Glass
• [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth.   Simon Glass
• [PATCH v3 1/2] dm: core: read the device tree into plat data after pinctrl   Simon Glass
• [PATCH v3] x86: cpu: x86_64: Detect CPU vendor and device ID using cpuid   Simon Glass
• [PATCH v1] env: Fix compile error for envtools   Simon Glass
• [PATCH] disk: ubi: use a format string when copying the volume name   Daniel Golle
• [PATCH] blkcache: include the hardware partition in the cache key   Daniel Golle
• [PATCH 0/9] boot: add imagemap on-demand image loading from storage   Daniel Golle
• [PATCH 1/9] mtd: bind an mtd_blk device for non-NAND MTD masters   Daniel Golle
• [PATCH 2/9] mtd: nand: sandbox: forbid sub-page writes   Daniel Golle
• [PATCH 3/9] cmd: ubi: create a ubi_blk device when attaching UBI   Daniel Golle
• [PATCH 4/9] mtd: nand: spi: drop the eager ubi_blk binding   Daniel Golle
• [PATCH 5/9] boot: add imagemap on-demand loading from storage   Daniel Golle
• [PATCH 6/9] boot: fit: support on-demand loading in fit_image_load()   Daniel Golle
• [PATCH 7/9] configs: sandbox: enable imagemap and its storage backends   Daniel Golle
• [PATCH 8/9] test: boot: add imagemap unit tests   Daniel Golle
• [PATCH 9/9] doc: imagemap: document on-demand loading framework   Daniel Golle
• [PATCH v2 00/11] imagemap: on-demand FIT loading from storage   Daniel Golle
• [PATCH v2 01/11] mtd: bind an mtd_blk device for non-NAND MTD masters   Daniel Golle
• [PATCH v2 02/11] mtd: nand: sandbox: forbid sub-page writes   Daniel Golle
• [PATCH v2 03/11] cmd: ubi: create a ubi_blk device when attaching UBI   Daniel Golle
• [PATCH v2 04/11] mtd: nand: spi: drop the eager ubi_blk binding   Daniel Golle
• [PATCH v2 05/11] mtd: ubi: block: build only with CONFIG_CMD_UBI   Daniel Golle
• [PATCH v2 06/11] mtd: ubi: block: only claim UBI block devices in the partition scan   Daniel Golle
• [PATCH v2 07/11] boot: add imagemap on-demand loading from storage   Daniel Golle
• [PATCH v2 08/11] boot: fit: support on-demand loading in fit_image_load()   Daniel Golle
• [PATCH v2 09/11] configs: sandbox: enable imagemap and its storage backends   Daniel Golle
• [PATCH v2 10/11] test: boot: add imagemap unit tests   Daniel Golle
• [PATCH v2 11/11] doc: imagemap: document on-demand loading framework   Daniel Golle
• [EXT] Re: [PATCH v3] imx: Add FRDM-IMX95 initial support   Joseph Guo
• [EXT] Re: [PATCH v3] imx: Add FRDM-IMX95 initial support   Joseph Guo
• [EXT] Re: [PATCH v3] imx: Add FRDM-IMX95 initial support   Joseph Guo
• [PATCH 1/4] serial: meson: add Amlogic S4 UART support   Ferass El Hafidi
• [PATCH 0/4] Add Amlogic T7 (A311D2) and Khadas VIM4 support   Ferass El Hafidi
• [PATCH 2/4] arm: meson: add Amlogic T7 SoC family support   Ferass El Hafidi
• [PATCH 3/4] board: amlogic: add Khadas VIM4 support   Ferass El Hafidi
• [PATCH 1/4] serial: meson: add Amlogic S4 UART support   Ferass El Hafidi
• [PATCH] ide: Fix truncation of device strings by one character   Graeme Harker
• [PATCH] video: console: fix scrolling on rotated consoles   Valentin Haudiquet
• [PATCH v2] rpi: copy /chosen/bootloader partition and set boot_partition   Gregor Herburger
• [PATCH v2] rpi: copy /chosen/bootloader partition and set boot_partition   Gregor Herburger
• [PATCH v3] rpi: copy /chosen/bootloader partition and set boot_partition   Gregor Herburger
• [PATCH v3] rpi: copy /chosen/bootloader partition and set boot_partition   Gregor Herburger
• [PATCH v4 0/2] rpi: copy /chosen/bootloader node with properties and set boot_partition   Gregor Herburger
• [PATCH v4 1/2] rpi: set boot partition from devicetree   Gregor Herburger
• [PATCH v4 2/2] rpi: pass the bootloader node through to the OS devicetree   Gregor Herburger
• [PATCH] usb: xhci-ring: Handle multi-TRB SHORT completions   Wouter van Herpen
• [PATCH] rockchip: rk3576-rock-4d: Enable XMC SPI chip   Martin Herren
• [PATCH v2] rockchip: rk3576-rock-4d: Enable XMC SPI chip   Martin Herren
• [PATCH v3] tools: fit: sign all config image references   James Hilliard
• [PATCH v2] tools: fit: sign all config image references   James Hilliard
• [PATCH] test: dm: hash: check digest size before memset   James Hilliard
• [PATCH v7 00/15] crypto: allwinner: enable sun8i-ce FIT crypto   James Hilliard
• [PATCH v7 01/15] cmd: aes: fix DM operation handling   James Hilliard
• [PATCH v7 02/15] crypto: aes: allow DM AES in SPL   James Hilliard
• [PATCH v7 03/15] crypto: hash: allow DM hash in SPL   James Hilliard
• [PATCH v7 04/15] boot: image: try all DM hash providers   James Hilliard
• [PATCH v7 05/15] lib: rsa: internalize PKCS#1 DigestInfo prefixes   James Hilliard
• [PATCH v7 06/15] crypto: hash: support hardware-only progressive hashing   James Hilliard
• [PATCH v7 07/15] crypto: aes: fix software key-size handling   James Hilliard
• [PATCH v7 08/15] crypto: aes: add software-key provider dispatch   James Hilliard
• [PATCH v7 09/15] boot: image: add FIT decrypt-to-buffer helper   James Hilliard
• [PATCH v7 10/15] spl: fit: support encrypted payloads   James Hilliard
• [PATCH v7 11/15] clk: sunxi: add H6/H616 CE gates and reset   James Hilliard
• [PATCH v7 12/15] lib: ecdsa: support additional curve sizes   James Hilliard
• [PATCH v7 13/15] crypto: allwinner: add sun8i-ce AES driver   James Hilliard
• [PATCH v7 14/15] crypto: allwinner: add sun8i-ce ECDSA verifier   James Hilliard
• [PATCH v7 15/15] crypto: allwinner: add sun8i-ce hash driver   James Hilliard
• [PATCH v8 00/15] crypto: allwinner: enable sun8i-ce FIT crypto   James Hilliard
• [PATCH v8 01/15] cmd: aes: fix DM operation handling   James Hilliard
• [PATCH v8 02/15] crypto: aes: allow DM AES in SPL   James Hilliard
• [PATCH v8 03/15] crypto: hash: allow DM hash in SPL   James Hilliard
• [PATCH v8 04/15] boot: image: try all DM hash providers   James Hilliard
• [PATCH v8 05/15] lib: rsa: internalize PKCS#1 DigestInfo prefixes   James Hilliard
• [PATCH v8 06/15] crypto: hash: support hardware-only progressive hashing   James Hilliard
• [PATCH v8 07/15] crypto: aes: fix software key-size handling   James Hilliard
• [PATCH v8 08/15] crypto: aes: add software-key provider dispatch   James Hilliard
• [PATCH v8 09/15] boot: image: add FIT decrypt-to-buffer helper   James Hilliard
• [PATCH v8 10/15] spl: fit: support encrypted payloads   James Hilliard
• [PATCH v8 11/15] clk: sunxi: add H6/H616 CE gates and reset   James Hilliard
• [PATCH v8 12/15] lib: ecdsa: support additional curve sizes   James Hilliard
• [PATCH v8 13/15] crypto: allwinner: add sun8i-ce AES driver   James Hilliard
• [PATCH v8 14/15] crypto: allwinner: add sun8i-ce ECDSA verifier   James Hilliard
• [PATCH v8 15/15] crypto: allwinner: add sun8i-ce hash driver   James Hilliard
• [PATCH v7 06/15] crypto: hash: support hardware-only progressive hashing   James Hilliard
• [PATCH] net: pcap: support lwIP   James Hilliard
• [PATCH] cmd: ethsw: support lwIP   James Hilliard
• [PATCH] net: lwip: support syslog   James Hilliard
• [PATCH] net: sandbox: support raw Ethernet with lwIP   James Hilliard
• [PATCH 00/10] net: share the lwIP runtime and support netconsole   James Hilliard
• [PATCH 01/10] net: lwip: return ERR_ABRT after aborting wget receive   James Hilliard
• [PATCH 02/10] net: split netconsole transport from stdio frontend   James Hilliard
• [PATCH 03/10] net: netconsole: use unsigned port numbers   James Hilliard
• [PATCH 04/10] net: netconsole: cache environment settings   James Hilliard
• [PATCH 05/10] net: lwip: allow DNS callbacks to be canceled   James Hilliard
• [PATCH 06/10] net: lwip: add an HTTP client abort operation   James Hilliard
• [PATCH 07/10] net: lwip: allow DHCP to stop without releasing its lease   James Hilliard
• [PATCH 08/10] net: lwip: share one network runtime between clients   James Hilliard
• [PATCH 09/10] test: dm: cover the shared lwIP runtime   James Hilliard
• [PATCH 10/10] net: netconsole: add an lwIP transport   James Hilliard
• [PATCH] net: lwip: support syslog   James Hilliard
• [PATCH v2] net: lwip: support syslog   James Hilliard
• [PATCH v2 0/4] fit: Harden handling of external-data properties   Anton Ivanov
• [PATCH v2 1/4] image-fit: Use unsigned types for external data properties   Anton Ivanov
• [PATCH v2 2/4] test: spl: Factor out external-data FIT property checks   Anton Ivanov
• [PATCH v2 3/4] spl: fit: Harden external-data offset and size arithmetic   Anton Ivanov
• [PATCH v2 4/4] spl: fit: Bound external data like U-Boot proper   Anton Ivanov
• [PATCH v3 0/4] fit: Harden handling of external-data properties   Anton Ivanov
• [PATCH v3 1/4] image-fit: Use unsigned types for external data properties   Anton Ivanov
• [PATCH v3 2/4] test: spl: Factor out external-data FIT property checks   Anton Ivanov
• [PATCH v3 3/4] spl: fit: Harden external-data offset and size arithmetic   Anton Ivanov
• [PATCH v3 4/4] spl: fit: Bound external data like U-Boot proper   Anton Ivanov
• [PATCH 0/2] net: dhcp6: fix out-of-bounds access in the option parser   Shahriyar Jalayeri
• [PATCH 1/2] net: dhcp6: bound received DUID option lengths   Shahriyar Jalayeri
• [PATCH 2/2] test: dm: eth: add DHCPv6 oversized option regression tests   Shahriyar Jalayeri
• [PATCH 0/2] net: dhcp6: fix an infinite loop parsing IA options   Shahriyar Jalayeri
• [PATCH 1/2] net: dhcp6: prevent an infinite loop parsing IA options   Shahriyar Jalayeri
• [PATCH 2/2] test: dm: eth: add a DHCPv6 zero-length IA option test   Shahriyar Jalayeri
• [PATCH 0/2] net: nfs: reject an out-of-range NFS read length   Shahriyar Jalayeri
• [PATCH 1/2] net: nfs: reject a negative or oversized NFS read length   Shahriyar Jalayeri
• [PATCH 2/2] test: dm: nfs: add a regression test for an oversized NFS read length   Shahriyar Jalayeri
• [PATCH 0/3] net: lwip: fix use-after-free bugs in the wget and dns commands   Shahriyar Jalayeri
• [PATCH 1/3] net: lwip: wget: return ERR_ABRT after aborting the connection   Shahriyar Jalayeri
• [PATCH 2/3] net: lwip: wget: free the transfer context after an aborted request   Shahriyar Jalayeri
• [PATCH 3/3] net: lwip: dns: free the callback context after an aborted lookup   Shahriyar Jalayeri
• [PATCH v2 0/3] net: nfs: bound server-supplied lengths in READ and READLINK replies   Shahriyar Jalayeri
• [PATCH v2 1/3] net: nfs: reject a negative or oversized NFS read length   Shahriyar Jalayeri
• [PATCH v2 2/3] net: nfs: reject a negative or oversized readlink length   Shahriyar Jalayeri
• [PATCH v2 3/3] test: dm: nfs: add regression tests for the NFS reply-length checks   Shahriyar Jalayeri
• [PATCH v5 0/2] tpm: bounds-check device-reported response lengths   Shahriyar Jalayeri
• [PATCH v5 1/2] tpm: bounds-check the device-reported response length   Shahriyar Jalayeri
• [PATCH v5 2/2] test: tpm: check malformed capability and OIAP responses are rejected   Shahriyar Jalayeri
• [PATCH v2 0/3] net: lwip: fix use-after-free bugs in the wget and dns commands   Shahriyar Jalayeri
• [PATCH v2 1/3] net: lwip: wget: return ERR_ABRT after aborting the connection   Shahriyar Jalayeri
• [PATCH v2 2/3] net: lwip: wget: free the transfer context after an aborted request   Shahriyar Jalayeri
• [PATCH v2 3/3] net: lwip: dns: free the callback context after an aborted lookup   Shahriyar Jalayeri
• [PATCH v3 0/3] net: nfs: bound server-supplied lengths in READ and READLINK replies   Shahriyar Jalayeri
• [PATCH v3 1/3] net: nfs: bound the length of an NFS read reply   Shahriyar Jalayeri
• [PATCH v3 2/3] net: nfs: bound the length of an NFS readlink reply   Shahriyar Jalayeri
• [PATCH v3 3/3] test: dm: nfs: add regression tests for the NFS reply-length checks   Shahriyar Jalayeri
• [PATCH v1 00/23] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A)   Vincent Jardin
• [PATCH v1 01/23] board: nxp: add Nodebox v3 CPU Module (LX2160A) base port   Vincent Jardin
• [PATCH v1 02/23] doc: board: nxp: add the Nodebox v3 CPU Module (nbxv3)   Vincent Jardin
• [PATCH v1 03/23] board: nbxv3: enable RTL8211FD PHY for 1G DPAA2   Vincent Jardin
• [PATCH v1 04/23] board: nbxv3: add MPQ8785 PMBus traces + DT regulator   Vincent Jardin
• [PATCH v1 05/23] board: nbxv3: add boot-time PMBus PSU traces   Vincent Jardin
• [PATCH v1 06/23] board: nbxv3: add VID-fuse driven core voltage   Vincent Jardin
• [PATCH v1 07/23] board: nbxv3: select carrier at boot   Vincent Jardin
• [PATCH v1 08/23] board: nbxv3: add DPLL status (ZL30733, ZL30643)   Vincent Jardin
• [PATCH v1 09/23] board: nbxv3: enable +3V3_FAN rail fixed regulator   Vincent Jardin
• [PATCH v1 10/23] arm: dts: layerscape: nbxv3: enable UART0..UART3   Vincent Jardin
• [PATCH v1 11/23] board: nbxv3: enable FlexSPI boot NOR (GD55LB02GF) and FIT boot   Vincent Jardin
• [PATCH v1 12/23] board: nbxv3: store the environment in the boot NOR   Vincent Jardin
• [PATCH v1 13/23] board: nbxv3: enable eMMC on eSDHC2   Vincent Jardin
• [PATCH v1 14/23] board: nbxv3: enable PCIe root complexes (PCIE3..PCIE6)   Vincent Jardin
• [PATCH v1 15/23] board: nbxv3: enable both USB host controllers   Vincent Jardin
• [PATCH v1 16/23] board: nbxv3: describe the I2C buses and their on module devices   Vincent Jardin
• [PATCH v1 17/23] arm: dts: nbxv3: add the +3V3_FAN regulator   Vincent Jardin
• [PATCH v1 18/23] board: nbxv3: enable JC42 + QorIQ TMU + PMBus thermal   Vincent Jardin
• [PATCH v1 19/23] board: nbxv3: enable HW crypto (CAAM) and rng command   Vincent Jardin
• [PATCH v1 20/23] arm: dts: nbxv3: bump SBSA watchdog timeout to 120s   Vincent Jardin
• [PATCH v1 21/23] board: nbxv3: add operator commands and JTAG semihosting   Vincent Jardin
• [PATCH v1 22/23] board: nbxv3: enable GPIO controllers with line names and hogs   Vincent Jardin
• [PATCH v1 23/23] board: nbxv3: add the boot environment (FIT over MC, MC memory, PS1)   Vincent Jardin
• [PATCH v1 00/23] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A)   Vincent Jardin
• [PATCH 0/6] Fixes and usability improvements for Layerscape QDS   Vincent Jardin
• [PATCH v1] spi: fsl_dspi: match the Layerscape DSPI compatibles   Vincent Jardin
• [PATCH v1] net: ldpaa_eth: fix error logics of unconfigured DPMACs   Vincent Jardin
• [PATCH v1] power: regulator: mpq8785: match the MPS MPQ8646   Vincent Jardin
• [PATCH v1] lx2160: add lx2160_serdes split and management   Vincent Jardin
• [PATCH next v1] net: rtl8169: add support for RTL8126A and RTL8127A   Javen
• [PATCH] x86: cpu: x86_64: Detect CPU vendor and device ID using cpuid   Desapogu Jayaramudu
• [PATCH v2] x86: cpu: x86_64: Detect CPU vendor and device ID using cpuid   Desapogu Jayaramudu
• [PATCH v3] x86: cpu: x86_64: Detect CPU vendor and device ID using cpuid   Desapogu Jayaramudu
• [PATCH v4] x86: cpu: x86_64: Detect CPU vendor and device ID using cpuid   Desapogu Jayaramudu
• [PATCH] net: lwip: dhcp: fix DHCP fine timer interval   Luca Jones
• [PATCH v4 0/9] doc: clean up README.rockchip   Johan Jonker
• [PATCH v4 1/9] rockchip: scripts: remove rkmux.py   Johan Jonker
• [PATCH v4 2/9] rockchip: doc: add mask ROM mode text   Johan Jonker
• [PATCH v4 3/9] rockchip: doc: remove TODO   Johan Jonker
• [PATCH v4 4/9] rockchip: doc: add more building instructions   Johan Jonker
• [PATCH v4 5/9] rockchip: tools: rksd: remove reference to README.rockchip   Johan Jonker
• [PATCH v4 6/9] rockchip: tools: rkspi: remove reference to README.rockchip   Johan Jonker
• [PATCH v4 7/9] rockchip: tools: add comment section to rkimage.c   Johan Jonker
• [PATCH v4 8/9] rockchip: doc: rockusb: remove reference to README.rockchip   Johan Jonker
• [PATCH v4 9/9] rockchip: doc: remove README.rockchip   Johan Jonker
• [PATCH v5 0/9] doc: clean up README.rockchip   Johan Jonker
• [PATCH v5 1/9] rockchip: scripts: remove rkmux.py   Johan Jonker
• [PATCH v5 2/9] rockchip: doc: add mask ROM mode text   Johan Jonker
• [PATCH v5 3/9] rockchip: doc: remove TODO   Johan Jonker
• [PATCH v5 4/9] rockchip: doc: add more building instructions   Johan Jonker
• [PATCH v5 5/9] rockchip: tools: rksd: remove reference to README.rockchip   Johan Jonker
• [PATCH v5 6/9] rockchip: tools: rkspi: remove reference to README.rockchip   Johan Jonker
• [PATCH v5 7/9] rockchip: tools: add comment section to rkimage.c   Johan Jonker
• [PATCH v5 8/9] rockchip: doc: rockusb: remove reference to README.rockchip   Johan Jonker
• [PATCH v5 9/9] rockchip: doc: remove README.rockchip   Johan Jonker
• [PATCH v6 0/6] doc: clean up README.rockchip   Johan Jonker
• [PATCH v6 1/6] rockchip: scripts: remove rkmux.py   Johan Jonker
• [PATCH v6 2/6] rockchip: doc: add mask ROM mode text   Johan Jonker
• [PATCH v6 3/6] rockchip: doc: remove TODO   Johan Jonker
• [PATCH v6 4/6] rockchip: doc: remove README.rockchip   Johan Jonker
• [PATCH v6 5/6] rockchip: doc: add back to ROM section   Johan Jonker
• [PATCH v6 6/6] rockchip: doc: add notes section   Johan Jonker
• [PATCH v7 0/6] doc: clean up README.rockchip   Johan Jonker
• [PATCH v7 1/6] rockchip: scripts: remove rkmux.py   Johan Jonker
• [PATCH v7 2/6] rockchip: doc: add mask ROM mode text   Johan Jonker
• [PATCH v7 3/6] rockchip: doc: remove TODO   Johan Jonker
• [PATCH v7 4/6] rockchip: doc: remove README.rockchip   Johan Jonker
• [PATCH v7 5/6] rockchip: doc: add back to ROM section   Johan Jonker
• [PATCH v7 6/6] rockchip: doc: add notes section   Johan Jonker
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Johan Jonker
• [PATCH] spi: xilinx_spi: fix premature transfer termination at low SCK   Suraj Kakade
• [PATCH] scripts: fix CONFIG_ARM64 conditional in upstream_dtsi_include   Suraj Kakade
• [PATCH RFC] scripts: pass dtc cpp flags via a GCC response file   Suraj Kakade
• [PATCH 0/2] scripts: dtc cpp flags via response file, GNU Make 4.0 cleanup   Suraj Kakade
• [PATCH 1/2] scripts: pass dtc cpp flags via a GCC response file   Suraj Kakade
• [PATCH 2/2] Makefile: drop GNU Make < 4.0 compatibility code   Suraj Kakade
• [PATCH v2 0/2] rockchip: rk3576: Disable force_jtag by default   Jonas Karlman
• [PATCH v2 1/2] include: linux: Import hw_bitfield.h from Linux v6.18   Jonas Karlman
• [PATCH v2 2/2] rockchip: rk3576: Disable force_jtag by default   Jonas Karlman
• [PATCH 0/6] rockchip: Miscellaneous updates for RK3506   Jonas Karlman
• [PATCH 1/6] rockchip: rk3506: Imply OF_UPSTREAM   Jonas Karlman
• [PATCH 2/6] rockchip: rk3506: Update ENV_MEM_LAYOUT_SETTINGS   Jonas Karlman
• [PATCH 3/6] adc: rockchip-saradc: Add driver data for RK3506   Jonas Karlman
• [PATCH 4/6] clk: rockchip: rk3506: Fix CLK_SARADC set rate issues   Jonas Karlman
• [PATCH 5/6] clk: rockchip: rk3506: Use FIELD_PREP_WM16 macro   Jonas Karlman
• [PATCH 6/6] rockchip: rk3506: Use FIELD_PREP_WM16 macro   Jonas Karlman
• [PATCH 0/4] rockchip: Always init clocks in SPL build for RK35xx   Jonas Karlman
• [PATCH 1/4] clk: rockchip: rk3568: Always init clocks in SPL build   Jonas Karlman
• [PATCH 2/4] clk: rockchip: rk3588: Always init clocks in SPL build   Jonas Karlman
• [PATCH 3/4] clk: rockchip: rk3576: Always init clocks in SPL build   Jonas Karlman
• [PATCH 4/4] clk: rockchip: rk3528: Always init clocks in SPL build   Jonas Karlman
• [PATCH 0/9] rockchip: Remove unneeded syscon driver for RK35xx   Jonas Karlman
• [PATCH 1/9] ram: rockchip: rk3568: Simplify get_info() ops   Jonas Karlman
• [PATCH 2/9] ram: rockchip: rk3588: Simplify get_info() ops   Jonas Karlman
• [PATCH 3/9] video: rockchip: dw_mipi_dsi: Get GRF base address from phandle   Jonas Karlman
• [PATCH 4/9] rockchip: rk3568: Remove unneeded syscon driver   Jonas Karlman
• [PATCH 5/9] rockchip: rk3588: Remove unneeded syscon driver   Jonas Karlman
• [PATCH 6/9] rockchip: rk3576: Remove unneeded syscon driver   Jonas Karlman
• [PATCH 7/9] rockchip: rk3528: Remove unneeded syscon driver   Jonas Karlman
• [PATCH 8/9] rockchip: rk3506: Remove unneeded syscon driver   Jonas Karlman
• [PATCH 9/9] rockchip: include: Remove unused ROCKCHIP_SYSCON_x enum values   Jonas Karlman
• [PATCH 1/9] ram: rockchip: rk3568: Simplify get_info() ops   Jonas Karlman
• [PATCH 0/9] rockchip: Remove unneeded syscon driver for RK35xx   Jonas Karlman
• [PATCH 00/10] rockchip: Remove unused rockchip_get_clk() helpers for RK35xx   Jonas Karlman
• [PATCH 01/10] rockchip: rk3588: Rename CRU_BASE to RK3588_CRU_BASE   Jonas Karlman
• [PATCH 02/10] rockchip: rk3588: Use fixed CRU base address   Jonas Karlman
• [PATCH 03/10] rockchip: rk3568: Use fixed CRU and PMU CRU base addresses   Jonas Karlman
• [PATCH 04/10] clk: rockchip: rk3568: Use fixed PMU CRU base address for PLL access   Jonas Karlman
• [PATCH 05/10] rockchip: rk3568: Remove unused rockchip_get_pmucru() helper   Jonas Karlman
• [PATCH 06/10] rockchip: rk3568: Remove unused rockchip_get_clk() helper   Jonas Karlman
• [PATCH 07/10] rockchip: rk3588: Remove unused rockchip_get_clk() helper   Jonas Karlman
• [PATCH 08/10] rockchip: rk3576: Remove unused rockchip_get_clk() helper   Jonas Karlman
• [PATCH 09/10] rockchip: rk3528: Remove unused rockchip_get_clk() helper   Jonas Karlman
• [PATCH 10/10] rockchip: rk3506: Remove unused rockchip_get_clk() helper   Jonas Karlman
• [PATCH 3/4] clk: rockchip: rk3576: Always init clocks in SPL build   Jonas Karlman
• [PATCH 00/30] rockchip: Add and use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 01/30] sysreset: rockchip: Add rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 02/30] clk: rockchip: rk3588: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 03/30] clk: rockchip: rk3576: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 04/30] clk: rockchip: rk3568: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 05/30] clk: rockchip: rk3528: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 06/30] clk: rockchip: rk3506: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 07/30] clk: rockchip: rk3399: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 08/30] clk: rockchip: rk3368: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 09/30] clk: rockchip: rk3328: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 10/30] clk: rockchip: rk3308: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 11/30] clk: rockchip: rk3288: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 12/30] clk: rockchip: rk322x: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 13/30] clk: rockchip: px30: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 14/30] clk: rockchip: rv1126: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 15/30] clk: rockchip: rv1108: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 16/30] clk: rockchip: rk3188: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 17/30] clk: rockchip: rk3128: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 18/30] clk: rockchip: rk3066: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 19/30] clk: rockchip: rk3036: Use rockchip_sysreset_bind() helper   Jonas Karlman
• [PATCH 20/30] sysreset: rockchip: Remove use of rockchip_get_cru()   Jonas Karlman
• [PATCH 21/30] sysreset: rockchip: Implement get_status() ops   Jonas Karlman
• [PATCH 22/30] rockchip: rk3399-roc-pc: Drop get_reset_cause() call   Jonas Karlman
• [PATCH 23/30] rockchip: cpuinfo: Use sysreset_get_status() helper   Jonas Karlman
• [PATCH 24/30] rockchip: rk3588: Remove unneeded rockchip_cru alias   Jonas Karlman
• [PATCH 25/30] rockchip: rk3568: Remove unneeded rockchip_cru alias   Jonas Karlman
• [PATCH 26/30] rockchip: rk3568: Remove unused rockchip_get_cru() helper   Jonas Karlman
• [PATCH 27/30] rockchip: rk3588: Remove unused rockchip_get_cru() helper   Jonas Karlman
• [PATCH 28/30] rockchip: rk3576: Remove unused rockchip_get_cru() helper   Jonas Karlman
• [PATCH 29/30] rockchip: rk3528: Remove unused rockchip_get_cru() helper   Jonas Karlman
• [PATCH 30/30] rockchip: rk3506: Remove unused rockchip_get_cru() helper   Jonas Karlman
• [PATCH 1/7] rockchip: mkimage: Split size_and_off and size_and_nimage   Jonas Karlman
• [PATCH 1/7] rockchip: mkimage: Split size_and_off and size_and_nimage   Jonas Karlman
• [PATCH v1] rockchip: spl: replace ifdef by IS_ENABLED for timer_init() call condition   Jonas Karlman
• [PATCH v2 1/2] include: linux: Import hw_bitfield.h from Linux v6.18   Jonas Karlman
• [PATCH] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Jonas Karlman
• [PATCH 01/15] clk: rockchip: pll: Fix double use of postdiv1   Jonas Karlman
• [PATCH] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Jonas Karlman
• [PATCH] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Jonas Karlman
• [PATCH 1/4] clk: rockchip: rk3568: Always init clocks in SPL build   Jonas Karlman
• [PATCH 2/4] clk: rockchip: rk3588: Always init clocks in SPL build   Jonas Karlman
• [PATCH 2/6] rockchip: rk3506: Update ENV_MEM_LAYOUT_SETTINGS   Jonas Karlman
• [PATCH 3/6] adc: rockchip-saradc: Add driver data for RK3506   Jonas Karlman
• [PATCH 4/6] clk: rockchip: rk3506: Fix CLK_SARADC set rate issues   Jonas Karlman
• [PATCH] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Jonas Karlman
• [PATCH] global_data: Only include driver model fields when DM is enabled   Jonas Karlman
• [PATCH v2] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Jonas Karlman
• [PATCH] boot: image-fdt: suppress spurious error on expected reservation failures   Jonas Karlman
• [PATCH v2 0/3] boot: image-fdt: Restore suppression of irrelevant ERROR message   Jonas Karlman
• [PATCH v2 1/3] lmb: Return -EFAULT when requested region is not part of memory map   Jonas Karlman
• [PATCH v2 2/3] lmb: Return -EFAULT when freeing unallocated memory regions   Jonas Karlman
• [PATCH v2 3/3] boot: image-fdt: Restore suppression of irrelevant ERROR message   Jonas Karlman
• [PATCH 3/6] adc: rockchip-saradc: Add driver data for RK3506   Jonas Karlman
• [PATCH 3/6] adc: rockchip-saradc: Add driver data for RK3506   Jonas Karlman
• [PATCH 2/6] rockchip: rk3506: Update ENV_MEM_LAYOUT_SETTINGS   Jonas Karlman
• [PATCH v6 5/6] rockchip: doc: add back to ROM section   Jonas Karlman
• [PATCH 5/6] clk: rockchip: rk3506: Use FIELD_PREP_WM16 macro   Jonas Karlman
• [PATCH v4] arm: rockchip: spl: Add hotkey detection support.   Jonas Karlman
• Re: Re：Re: [PATCH v4] arm: rockchip: spl: Add hotkey detection support.   Jonas Karlman
• [PATCH v8 4/8] image-fit-sig: Optionally require signatures   Jonas Karlman
• [PATCH v2] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Jonas Karlman
• [PATCH 5/6] clk: rockchip: rk3506: Use FIELD_PREP_WM16 macro   Jonas Karlman
• [PATCH v8 4/8] image-fit-sig: Optionally require signatures   Jonas Karlman
• [PATCH v1 0/1] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Vandhiadevan Karunamoorthy
• [PATCH v1 1/1] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Vandhiadevan Karunamoorthy
• [PATCH v1 1/1] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Vandhiadevan Karunamoorthy
• [PATCH v2] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Vandhiadevan Karunamoorthy
• [PATCH] misc: qcom_geni: fix RX_RFR_WATERMARK to use RX FIFO depth, not width   Vandhiadevan Karunamoorthy
• [PATCH v2] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Vandhiadevan Karunamoorthy
• [PATCH v3] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Vandhiadevan Karunamoorthy
• [PATCH v4] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Vandhiadevan Karunamoorthy
• [PATCH v3] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Vandhiadevan Karunamoorthy
• [PATCH] mmc: add option to skip eMMC deinit on OS handoff   Kathpalia, Tanmay
• [PATCH] MAINTAINERS: mmc: Add myself as a reviewer   Tanmay Kathpalia
• [PATCH 1/4] tee: optee: Add support for enumerating services that only need RPMB   Kathpalia, Tanmay
• [PATCH 2/4] tee: optee: Do not warn about TEE_ERROR_STORAGE_NOT_AVAILABLE   Kathpalia, Tanmay
• [PATCH 3/4] mmc: Call back to optee after a successful mmc_init   Kathpalia, Tanmay
• [PATCH 1/4] tee: optee: Add support for enumerating services that only need RPMB   Kathpalia, Tanmay
• [PATCH] mmc: add option to skip eMMC deinit on OS handoff   Kathpalia, Tanmay
• [PATCH v2] mmc: add option to skip eMMC deinit on OS handoff   Kathpalia, Tanmay
• [PATCH v2 4/5] mmc: Call back to optee after a successful mmc_init   Kathpalia, Tanmay
• [PATCH v2 5/5] mmc: Make "MMC Device not found" a debug output   Kathpalia, Tanmay
• [RESEND PATCH 1/2] mmc: sdhci-cadence6: flush posted writes to PHY registers   Kathpalia, Tanmay
• [RESEND PATCH 2/2] mmc: sdhci-cadence6: wait for the PHY to settle after adjustment   Kathpalia, Tanmay
• [PATCH v1 1/3] mmc: msm_sdhci: fix max-frequency read into wrong-sized variable   Kathpalia, Tanmay
• [PATCH v1 2/3] mmc: msm_sdhci: add HS200/HS400 support   Kathpalia, Tanmay
• Bogus error messages on Apple Silicon   Mark Kettenis
• [PATCH] test: boot: measurement: Fix compilation for non-sandbox builds   Jan Kiszka
• [PATCH 0/4] optee: Add support for enumerating RPMB-dependent services   Jan Kiszka
• [PATCH 1/4] tee: optee: Add support for enumerating services that only need RPMB   Jan Kiszka
• [PATCH 2/4] tee: optee: Do not warn about TEE_ERROR_STORAGE_NOT_AVAILABLE   Jan Kiszka
• [PATCH 3/4] mmc: Call back to optee after a successful mmc_init   Jan Kiszka
• [PATCH 4/4] mmc: Make "MMC Device not found" a debug output   Jan Kiszka
• [PATCH 1/4] tee: optee: Add support for enumerating services that only need RPMB   Jan Kiszka
• [PATCH 1/4] tee: optee: Add support for enumerating services that only need RPMB   Jan Kiszka
• [PATCH v2 0/5] optee: Add support for enumerating RPMB-dependent services   Jan Kiszka
• [PATCH v2 1/5] tee: optee: Factor out service enumeration and binding functions   Jan Kiszka
• [PATCH v2 2/5] tee: optee: Add support for enumerating services that only need RPMB   Jan Kiszka
• [PATCH v2 3/5] tee: optee: Do not warn about TEE_ERROR_STORAGE_NOT_AVAILABLE   Jan Kiszka
• [PATCH v2 4/5] mmc: Call back to optee after a successful mmc_init   Jan Kiszka
• [PATCH v2 5/5] mmc: Make "MMC Device not found" a debug output   Jan Kiszka
• [PATCH v3 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jan Kiszka
• [PATCH v3 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jan Kiszka
• [PATCH] arm: sc5xx: Enable BOOTSTD_DEFAULTS   Uwe Kleine-König
• [PATCH] arm: sc5xx: Enable BOOTSTD_DEFAULTS   Uwe Kleine-König
• [PATCH] ARM: socfpga: fix dead guard on board_spl_mmc_get_uboot_raw_sector()   Mahmoud Komaiha
• [PATCH 1/4] avb: make the AVB root key source pluggable   Mattijs Korpershoek
• [PATCH 2/4] avb: add OP-TEE root key digest provider   Mattijs Korpershoek
• [PATCH 3/4] avb: add board-specific root key provider   Mattijs Korpershoek
• [PATCH 4/4] doc: android: document the AVB root key source   Mattijs Korpershoek
• [PATCH] bootstd: android: bound the boot image read by its partition size   Mattijs Korpershoek
• [security] Report of possible heap overflow in U-Boot's Android bootmeth before any AVB verification (ANT-2026-ZWED60S8)   Mattijs Korpershoek
• [security] Report of possible global heap overflow in U-Boot's fastboot-over-TCP server by authenticated peer (ANT-2026-5D7F7SAQ)   Mattijs Korpershoek
• [PATCH 0/4] avb: make the AVB root key source pluggable   Mattijs Korpershoek
• [PATCH] bootstd: android: bound the boot image read by its partition size   Mattijs Korpershoek
• [PATCH RFC v3 1/5] fastboot: factor out the USB session runner   Mattijs Korpershoek
• [PATCH RFC v3 2/5] fastboot: use the common handler for USB reboot   Mattijs Korpershoek
• [PATCH RFC v3 3/5] fastboot: make shared configuration checks phase-aware   Mattijs Korpershoek
• [PATCH RFC v3 4/5] image: sparse: add phase-aware SPL support   Mattijs Korpershoek
• [PATCH RFC v3 5/5] fastboot: add SPL support   Mattijs Korpershoek
• [PATCH v3] boot: android: Add support for the bootflow of Android 13+   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20260819 into main   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-next-20260819 into next   Mattijs Korpershoek
• [PATCH v6 18/87] usb: dwc3: import from kernel v4.14   Mattijs Korpershoek
• [PATCH v6 27/87] usb: dwc3: import from kernel v5.2   Mattijs Korpershoek
• [PATCH v6 33/87] usb: dwc3: import from kernel v5.8   Mattijs Korpershoek
• [PATCH v6 34/87] usb: dwc3: import from kernel v5.9   Mattijs Korpershoek
• [PATCH v3 2/2] usb: gadget: Add Renesas RZ/N1 USBF controller support   Mattijs Korpershoek
• [PATCH v4] Add support for OpenSSL Provider API   Eddie Kovsky
• [PATCH v4] Add support for OpenSSL Provider API   Eddie Kovsky
• [PATCH] airoha: add support for Airoha AN7583 SoC   Mikhail Kshevetskiy
• [PATCH] net: airoha: add support for Airoha AN7583 PCS driver   Mikhail Kshevetskiy
• [PATCH 00/16] arm: airoha: add AN7583 SoC support   Mikhail Kshevetskiy
• [PATCH 01/16] airoha: add support for Airoha AN7583 SoC   Mikhail Kshevetskiy
• [PATCH 02/16] arm: airoha: introduce AN7583 helpers to get SCU and CHIP_SCU regmaps   Mikhail Kshevetskiy
• [PATCH 03/16] dt-bindings: clock: airoha: Document support for AN7583 clock   Mikhail Kshevetskiy
• [PATCH 04/16] clk: airoha: add support for Airoha AN7583 SoC clock   Mikhail Kshevetskiy
• [PATCH 05/16] reset: airoha: Add support for Airoha AN7583 reset   Mikhail Kshevetskiy
• [PATCH 06/16] net: airoha: add support for Airoha AN7583   Mikhail Kshevetskiy
• [PATCH 07/16] airoha: add Ethernet node in AN7583 dtsi   Mikhail Kshevetskiy
• [PATCH 08/16] airoha: add MMC node for Airoha AN7583   Mikhail Kshevetskiy
• [PATCH 09/16] configs: an7583: add mii/mdio support   Mikhail Kshevetskiy
• [PATCH 10/16] arm: dts: an7583: add mdio child node to switch node   Mikhail Kshevetskiy
• [PATCH 11/16] net: airoha: add support for Airoha AN7583 PCS driver   Mikhail Kshevetskiy
• [PATCH 12/16] airoha: add PCS node for AN7583   Mikhail Kshevetskiy
• [PATCH 13/16] configs: enable PCS for Airoha AN7583   Mikhail Kshevetskiy
• [PATCH 14/16] net: Add support for Airoha AN7583 MDIO Controller   Mikhail Kshevetskiy
• [PATCH 15/16] an7583: fix system controller mdio nodes   Mikhail Kshevetskiy
• [PATCH 16/16] an7583: enable MDIO_AIROHA by default   Mikhail Kshevetskiy
• [PATCH] pinctrl: airoha: sync with linux-7.3 driver   Mikhail Kshevetskiy
• [PATCH] pinctrl: airoha: sync with linux-7.3 driver   Mikhail Kshevetskiy
• [PATCH v4] test/py: nand: Add tests for NAND flash device   Love Kumar
• [PATCH 02/17] spi: cadence_qspi: enable clock   Kumar, Udit
• [PATCH] include: env: ti: k3_dfu: Add condition for sysfw.itb   Kumar, Udit
• [PATCH 03/17] spi: cadence_qspi: Use APB write protection   Kumar, Udit
• [PATCH 03/17] spi: cadence_qspi: Use APB write protection   Kumar, Udit
• [PATCH 03/17] spi: cadence_qspi: Use APB write protection   Kumar, Udit
• [PATCH] scmi: pinctrl: Rename SCMI_PIN_DEFUALT to SCMI_PIN_DEFAULT   Udit Kumar
• [PATCH v2 0/2] board: sophgo: add support for Milk-V Duo 256M   Andrei Lalaev
• [PATCH v2 0/2] board: sophgo: add support for Milk-V Duo 256M   Andrei Lalaev
• [PATCH v2 0/2] board: sophgo: add support for Milk-V Duo 256M   Andrei Lalaev
• [PATCH v3 4/7] riscv: milkv_duo: Use upstream devicetree   Andrei Lalaev
• [PATCH v2 0/2] board: sophgo: add support for Milk-V Duo 256M   Andrei Lalaev
• [PATCH 2/2] i2c: k1: enable all clocks for I2C controllers   Yixun Lan
• [PATCH v8 06/11] dts: k1: add SD card support in u-boot overlay   Yixun Lan
• [PATCH v8 03/11] pinctrl: k1: fix pull-up/pull-down configuration   Yixun Lan
• [PATCH v8 02/11] pinctrl: k1: fix drive strength configuration   Yixun Lan
• [PATCH v8 04/11] pinctrl: k1: add IO power domain configuration support   Yixun Lan
• [PATCH v2 1/4] i2c: k1: fix wrong bus speed setting   Yixun Lan
• [PATCH v2 3/4] i2c: k1: enable both functional and bus clocks   Yixun Lan
• [PATCH v2 3/4] i2c: k1: enable both functional and bus clocks   Yixun Lan
• [PATCH 0/2] riscv: spacemit: add pinctrl support for K3 SoC   Yixun Lan
• [PATCH 1/2] pinctrl: spacemit: configure drive strength based on power source   Yixun Lan
• [PATCH 2/2] pinctrl: spacemit: k3: add K3 pin support   Yixun Lan
• [PATCH v9 00/19] spacemit mmc driver   Yixun Lan
• [PATCH v9 02/19] pinctrl: k1: fix pull-up/pull-down configuration   Yixun Lan
• [PATCH] gpio: spacemit: add support for K3 SoC   Yixun Lan
• [PATCH 0/8] spacemit: k3: add clock and reset support   Yixun Lan
• [PATCH 1/8] clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc()   Yixun Lan
• [PATCH 2/8] clk: spacemit: ccu_mix: add inverted enable gate clock   Yixun Lan
• [PATCH 3/8] clk: spacemit: ccu_pll: add plla type clock   Yixun Lan
• [PATCH 4/8] clk: spacemit: k3: extract common header   Yixun Lan
• [PATCH 5/8] clk: spacemit: k3: add the clock tree   Yixun Lan
• [PATCH 6/8] clk: spacemit: k3: reduce clock tree for SPL build   Yixun Lan
• [PATCH 7/8] reset: spacemit: Extract common K1 reset code   Yixun Lan
• [PATCH 8/8] reset: spacemit: Add SpacemiT K3 reset driver   Yixun Lan
• [PATCH] board: spacemit: k1: accept the "m1-x_" TLV product name prefix   Yixun Lan
• [PATCH] board: spacemit: k1: accept the "m1-x_" TLV product name prefix   Yixun Lan
• [PATCH 2/2] pinctrl: spacemit: k3: add K3 pin support   Yixun Lan
• [PATCH v3] usb: mtu3: wait for TX FIFO to drain before disconnect   David Lechner
• [PATCH v3] usb: mtu3: wait for TX FIFO to drain before disconnect   David Lechner
• [PATCH 0/4] pinctrl: mediatek: Kconfig cleanup   David Lechner
• [PATCH 1/4] pinctrl: mediatek: select PINCONF   David Lechner
• [PATCH 2/4] pinctrl: mediatek: remove PINCONF conditional compilation   David Lechner
• [PATCH 3/4] pinctrl: mediatek: simplify Kconfig   David Lechner
• [PATCH 4/4] configs: mediatek: drop no longer needed PINCTRL options   David Lechner
• [PATCH] cmd: scsi: Drop duplicate leading scsi prefix   David Lechner
• [PATCH v3] usb: mtu3: wait for TX FIFO to drain before disconnect   David Lechner
• [PATCH] pinctrl: mediatek: add new mt8366 driver   David Lechner
• [PATCH] clk: mediatek: add support for MT8366   David Lechner
• [PATCH 0/6] arm: mediatek: Genio 360 EVK bringup   David Lechner
• [PATCH 1/6] dt-bindings: clock: add MT8366 clock header   David Lechner
• [PATCH 2/6] dt-bindings: pinctrl: add MT8366 pin function header   David Lechner
• [PATCH 3/6] arm: dts: add MT8366 application processor   David Lechner
• [PATCH 4/6] arm: mediatek: add MT8366 application processor   David Lechner
• [PATCH 5/6] arm: dts: mediatek: add Genio 360 EVK   David Lechner
• [PATCH 6/6] board: mediatek: add Genio 360 EVK defconfig   David Lechner
• [PATCH 0/7] power: mediatek: add MT6366 PMIC support   David Lechner
• [PATCH 1/7] power: regulator: add MT6358 driver with MT6366 support   David Lechner
• [PATCH 2/7] power: pmic: mtk-pwrap: fix clock names   David Lechner
• [PATCH 3/7] power: pmic: mtk-pwrap: use mt8195 fallback for mt8188/9   David Lechner
• [PATCH 4/7] power: pmic: mtk-pwrap: add mt6358 PMIC   David Lechner
• [PATCH 5/7] arm: dts: add mt6366 PMIC include   David Lechner
• [PATCH 6/7] arm: dts: mt8366: enable PMIC   David Lechner
• [PATCH 7/7] configs: mediatek: enable PMIC on Genio 360 EVK   David Lechner
• [PATCH] phy: mtk-tphy: add v3 hardware support   David Lechner
• [PATCH] cmd: ufetch: fix compiling with no CONFIG_SYS_CONFIG_NAME   David Lechner
• [PATCH] arm: mediatek: use phase-aware PSCI reset on MT8188   David Lechner
• [PATCH] clk: mediatek: mt8188: fix top0 gate polarity   David Lechner
• [GIT PULL] Please pull mediatek-for-main-2026-08-05 into main   David Lechner
• [GIT PULL] Please pull mediatek-for-main-2026-08-05 into main   David Lechner
• [GIT PULL v2] Please pull mediatek-for-main-2026-08-05 into main   David Lechner
• [PATCH 0/3] net: mediatek: add mt8366 support   David Lechner
• [PATCH 1/3] net: dwc_eth_qos_mtk: support platform-specific PERI_ETH_BASE   David Lechner
• [PATCH 2/3] net: dwc_eth_qos_mtk: add mt8366 support   David Lechner
• [PATCH 3/3] net: dwc_eth_qos: add mt8366 support   David Lechner
• [PATCH] Makefile: fix dtbs_check target   David Lechner
• [PATCH] spi: mtk_snor: combine mt8188 and mt8189 into mediatek,mt8186-nor   David Lechner
• [PATCH 1/4] pinctrl: mediatek: select PINCONF   David Lechner
• [PATCH 0/6] arm: mediatek: Genio 360 EVK bringup   David Lechner
• [PATCH v2 0/5] power: mediatek: add MT6366 PMIC support   David Lechner
• [PATCH v2 1/5] power: regulator: add MT6358 driver with MT6366 support   David Lechner
• [PATCH v2 2/5] power: pmic: mtk-pwrap: fix clock names   David Lechner
• [PATCH v2 3/5] power: pmic: mtk-pwrap: use mt8195 fallback for mt8188/9   David Lechner
• [PATCH v2 4/5] power: pmic: mtk-pwrap: add mt6358 PMIC   David Lechner
• [PATCH v2 5/5] arm: dts: add mt6366 PMIC include   David Lechner
• [PATCH v2 0/4] arm: mediatek: Genio 360 EVK bringup   David Lechner
• [PATCH v2 1/4] arm: dts: add MT8366 application processor   David Lechner
• [PATCH v2 2/4] arm: mediatek: add MT8366 application processor   David Lechner
• [PATCH v2 3/4] arm: dts: mediatek: add Genio 360 EVK   David Lechner
• [PATCH v2 4/4] board: mediatek: add Genio 360 EVK defconfig   David Lechner
• [PATCH v2 0/2] pinctrl: mediatek: add mt8366 support   David Lechner
• [PATCH v2 1/2] pinctrl: mediatek: add new mt8366 driver   David Lechner
• [PATCH v2 2/2] dt-bindings: pinctrl: add MT8366 pin function header   David Lechner
• [PATCH v3 0/4] serial: mtk: clock rate fixes   David Lechner
• [PATCH v3 1/4] serial: mtk: use ulong for clk_rate   David Lechner
• [PATCH v3 2/4] serial: mtk: guard clk ops on clk.dev   David Lechner
• [PATCH v3 3/4] serial: mtk: return error value from clk_get_rate()   David Lechner
• [PATCH v3 4/4] serial: serial_mtk: drop check before clk_bus enable   David Lechner
• [PATCH v2 0/4] pinctrl: mediatek: Kconfig cleanup   David Lechner
• [PATCH v2 1/4] pinctrl: mediatek: select PINCONF   David Lechner
• [PATCH v2 2/4] pinctrl: mediatek: remove PINCONF conditional compilation   David Lechner
• [PATCH v2 3/4] pinctrl: mediatek: simplify Kconfig   David Lechner
• [PATCH v2 4/4] configs: mediatek: drop no longer needed PINCTRL options   David Lechner
• [PATCH v3 2/4] serial: mtk: guard clk ops on clk.dev   David Lechner
• [PATCH] Makefile: fix dtbs_check target   David Lechner
• [PATCH] clk: mediatek: fix reprobe regression   David Lechner
• [PATCH] clk: mediatek: fix reprobe regression   David Lechner
• [PATCH v2] clk: mediatek: fix using clocks before relocation   David Lechner
• [PATCH v2 0/2] i2c: add HDMI DDC driver for MT8188 and MT8195   David Lechner
• [PATCH v2] phy: phy-mtk-hdmi: add new driver   David Lechner
• [PATCH] arm: dts: mediatek: remove mt8188 tphy fallback   David Lechner
• [PATCH] clk: mediatek: mt8189: add missing qualifiers   David Lechner
• [PATCH 0/2] arm: mediatek: use phase-aware PSCI reset   David Lechner
• [PATCH v2 0/2] clk: mediatek: mt8366: add new clock driver   David Lechner
• [PATCH v2 1/2] dt-bindings: clock: add MT8366 clock header   David Lechner
• [PATCH v2 2/2] clk: mediatek: add support for MT8366   David Lechner
• [PATCH 0/4] power: domain: mtk: add mt8366 power domain   David Lechner
• [PATCH 1/4] power: domain: mtk: add bus_prot_sta_mask field   David Lechner
• [PATCH 2/4] power: domain: mtk: add BUS_PROT_WR_IGN() macros   David Lechner
• [PATCH 3/4] dt-bindings: power: add mediatek,mt8366-power.h   David Lechner
• [PATCH 4/4] power: domain: mtk: add mt8366 power domain   David Lechner
• [PATCH] video: pwm_backlight: support num-interpolated-steps   David Lechner
• [PATCH] pwm: add MediaTek display PWM driver   David Lechner
• [PATCH] video: panel-startek-kd070fhfid078: new driver   David Lechner
• [PATCH] configs: mediatek: remove UFS defconfigs   David Lechner
• [PATCH] arm: dts: mediatek: remove mt6357.dtsi   David Lechner
• [PATCH] power: domain: mtk: remove setting DCM_TOP_EN   David Lechner
• [PATCH] video: panel: Support for startek-kd070fhfid015 MIPI-DSI panel   David Lechner
• [PATCH] phy: mtk-tphy: add v3 hardware support   David Lechner
• [PATCH 0/3] net: mediatek: add mt8366 support   David Lechner
• [PATCH] spi: mtk_snor: combine mt8188 and mt8189 into mediatek,mt8186-nor   David Lechner
• [PATCH v2 0/5] power: mediatek: add MT6366 PMIC support   David Lechner
• [PATCH v2 0/4] pinctrl: mediatek: Kconfig cleanup   David Lechner
• [PATCH v2 0/2] pinctrl: mediatek: add mt8366 support   David Lechner
• [PATCH v3 0/4] serial: mtk: clock rate fixes   David Lechner
• [GIT PULL] Please pull mediatek-for-next-2026-08-24 into next   David Lechner
• [PATCH v4 2/6] configs: mt8188: enable eMMC FIT boot from SPL   David Lechner
• [PATCH v4 3/6] arm: mediatek: build Genio 510 and 700 boot images with binman   David Lechner
• [PATCH v3 0/4] arm: mediatek: Genio 360 EVK bringup   David Lechner
• [PATCH v3 1/4] arm: dts: add MT8366 application processor   David Lechner
• [PATCH v3 2/4] arm: mediatek: add MT8366 application processor   David Lechner
• [PATCH v3 3/4] arm: dts: mediatek: add Genio 360 EVK   David Lechner
• [PATCH v3 4/4] board: mediatek: add Genio 360 EVK defconfig   David Lechner
• [PATCH v2 01/14] video: mediatek: add display pipeline component helpers   David Lechner
• [PATCH v2 02/14] video: mediatek: add ethdr component   David Lechner
• [PATCH v2 03/14] video: mediatek: add merge component   David Lechner
• [PATCH v2 04/14] video: mediatek: add mutex component   David Lechner
• [PATCH v2 06/14] video: mediatek: add rdma component   David Lechner
• [PATCH v2 08/14] video: mediatek: add dpi1 component   David Lechner
• [PATCH v2 10/14] include: linux/hdmi.h: add HDMI colorspace and colorimetry enums   David Lechner
• [PATCH v2 11/14] video: mediatek: add new hdmi driver   David Lechner
• [PATCH v2 13/14] arm: dts: mt8390: add hdmi override node   David Lechner
• [PATCH v2 14/14] configs: mediatek: mt8188: enable hdmi pipeline   David Lechner
• [PATCH v2 00/14] mediatek: add HDMI pipeline support for MT8188 based boards   David Lechner
• [PATCH v2] video: panel-startek-kd070fhfid078: new driver   David Lechner
• U-Boot Fastboot TCP unchecked stream copy overwrites connection callback   Lee, Brian J
• U-Boot NFS READLINK basename overflows LOOKUP RPC stack request   Lee, Brian J
• U-Boot USB storage BBB CBW leaks uninitialized CDB tail bytes   Lee, Brian J
• [PATCH] LFU-1040 layerscape: optee: restore fdt headroom after applying overlay   Chunguang Li
• [PATCH] LFU-1040 layerscape: optee: restore fdt headroom after applying overlay   Chunguang Li
• [PATCH] layerscape: optee: remove fdt_pack() after applying overlay   Chunguang Li
• [PATCH v2 1/2] board: sophgo: move ethernet driver to common directory   Leo Liang
• [PATCH v2 2/2] board: sophgo: add support for Milk-V Duo 256M   Leo Liang
• [PATCH v2 0/2] board: sophgo: add support for Milk-V Duo 256M   Leo Liang
• [GIT PULL] u-boot-riscv/main   Leo Liang
• [PATCH] clk: spacemit: Fix empty PLL rate table handling   Junhui Liu
• [PATCH v3 3/7] riscv: licheerv_nano: Enable hardware system reset   Junhui Liu
• [PATCH v3 4/7] riscv: milkv_duo: Use upstream devicetree   Junhui Liu
• [PATCH 0/2] i2c/clk: spacemit: k1: fix bus configuration and clock handling   Junhui Liu
• [PATCH 1/2] i2c: k1: fix wrong bus speed setting   Junhui Liu
• [PATCH 2/2] i2c: k1: enable all clocks for I2C controllers   Junhui Liu
• [PATCH v2 0/4] i2c/clk: spacemit: k1: fix I2C bus configuration and clock handling   Junhui Liu
• [PATCH v2 1/4] i2c: k1: fix wrong bus speed setting   Junhui Liu
• [PATCH v2 2/4] clk: spacemit: k1: add TWSI bus clocks to SPL   Junhui Liu
• [PATCH v2 3/4] i2c: k1: enable both functional and bus clocks   Junhui Liu
• [PATCH v2 4/4] clk: spacemit: k1: remove bus gate from TWSI functional clocks   Junhui Liu
• [PATCH v2 1/4] i2c: k1: fix wrong bus speed setting   Junhui Liu
• [PATCH 0/2] tools: mkimage: add SpacemiT K3 AIHD image support   Junhui Liu
• [PATCH 1/2] tools: mkimage: add SpacemiT K3 AIHD image support   Junhui Liu
• [PATCH 2/2] doc: board: spacemit: document the AIHD image format   Junhui Liu
• [PATCH v2 0/4] i2c/clk: spacemit: k1: fix I2C bus configuration and clock handling   Junhui Liu
• [PATCH] boot: android: Add support for the bootflow of Android 13+   Valentin Liu
• [PATCH v2] boot: android: Add support for the bootflow of Android 13+   Valentin Liu
• [PATCH v3] boot: android: Add support for the bootflow of Android 13+   Valentin Liu
• [PATCH] arm: rockchip: spl: Add hotkey detection support.   Valentin Liu
• [PATCH v2] arm: rockchip: spl: Add hotkey detection support.   Valentin Liu
• [PATCH v2] arm: rockchip: spl: Add hotkey detection support.   Valentin Liu
• [PATCH v3] arm: rockchip: spl: Add hotkey detection support.   Valentin Liu
• [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth.   Valentin Liu
• [PATCH v1 2/2] boot: android: Add AVB verification support for different bootflow.   Valentin Liu
• [PATCH v4] arm: rockchip: spl: Add hotkey detection support.   Valentin Liu
• [PATCH v5] arm: rockchip: spl: Add hotkey detection support.   Valentin Liu
• [PATCH] ddr: altera: iossm: wait for mailbox ready before commands   Chen Huei Lok
• [PATCH] arm: socfpga: n5x: use common soc64 env settings   Chen Huei Lok
• [PATCH] arm: socfpga: spl: skip HPS SMMU secure config when node absent   Chen Huei Lok
• [PATCH] reset: socfpga: add legacy peripheral reset compatibility Kconfig   Chen Huei Lok
• [PATCH] mach-zynq: SPL Boot from QSPI in memory-mapped mode   Mike Looijmans
• [PATCH] zynq-topic-miami.dts: Use fixed-partitions binding for QSPI NOR   Mike Looijmans
• Trying to get MTD_BLOCK to actually work   Mike Looijmans
• Trying to get MTD_BLOCK to actually work   Mike Looijmans
• [PATCH] tools: fwumdata: fix redundant metadata buffer overlap   Kory Maincent
• [PATCH 1/1] tools: build mkeficapsule for CONFIG_EFI_HAVE_CAPSULE_SUPPORT=y   Kory Maincent
• [PATCH v4] video: add ChipWealth CH13726A AMOLED panel driver   Pratham Malaviya
• [PATCH v4] video: add ChipWealth CH13726A AMOLED panel driver   Pratham Malaviya
• [PATCH v2] watchdog: adi_wdt: get SEC fault source ID from DT   Greg Malysa
• [PATCH] arm: sc5xx: Enable BOOTSTD_DEFAULTS   Greg Malysa
• [PATCH 0/2] sc59x: Disable CONFIG_EFI_LOADER   Greg Malysa
• [PATCH] arm: sc5xx: Enable BOOTSTD_DEFAULTS   Greg Malysa
• [PATCH] configs: sc598-som-ezlite: select EV-SOMCRR-EZLITE carrier   Greg Malysa
• [PATCH] arm: dts: socfpga: Add Agilex5 E-Series 013B SoCDK variant   Maniyam, Dinesh
• perp work for submitting Draeger imx6-related patches   Petko Manolov
• prep work for submitting Draeger imx6-ralated patches   Petko Manolov
• [PATCH v1 0/1] arm: draeger: Add devicetrees for Draeger's M48 board.   Petko Manolov
• [PATCH v1 1/1] arm: draeger: Dräger M48 on NXP i.MX6(Q) and Intel/Altera SoCFPGA Cyclone V devicetree.   Petko Manolov
• [PATCH v1 1/1] arm: draeger: Dräger M48 on NXP i.MX6(Q) and Intel/Altera SoCFPGA Cyclone V devicetree.   Petko Manolov
• [PATCH v1 1/1] arm: draeger: Dräger M48 on NXP i.MX6(Q) and Intel/Altera SoCFPGA Cyclone V devicetree.   Petko Manolov
• [PATCH v2 1/2] lib/fdtdec.c: Disallow overriding BLOBLIST_PASSAGE_MANDATORY   Raymond Mao
• [PATCH v2] airoha: add support for Airoha AN7583 SoC   Christian Marangi
• [BUG] rockchip: v2026.07 fails to boot on GameForce Ace (RK3588S)   Daniel Martin
• [BUG] rockchip: v2026.07 fails to boot on GameForce Ace (RK3588S)   Daniel Martin
• [BUG] rockchip: v2026.07 fails to boot on GameForce Ace (RK3588S)   Daniel Martin
• [BUG] rockchip: v2026.07 fails to boot on GameForce Ace (RK3588S)   Daniel Martin
• [PATCH v3 0/4] arm: mach-snapdragon: Qualcomm pinctrl driver cleanup   Yasmin azucena Marroquin Martinez
• [PATCH v3] power: regulator: tps65219: Fix LDO selector boundaries   Kumara Bhimeswararao Matsa
• [PATCH v2] board: ti: j721e: Fix up eMMC OTAP delay for HS200 on SR2.0   Mendez, Judith
• [PATCH] include/env.h: use plain old #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG   Max Merchel
• [PATCH 0/3] Remove patches no longer needed with dts 7.2   Max Merchel
• [PATCH 1/3] Revert "ARM: dts: tqma6: add boot phase properties"   Max Merchel
• [PATCH 2/3] Revert "ARM: dts: tqma6ul: add boot phase properties"   Max Merchel
• [PATCH 3/3] Revert "arch: arm: dts: tqma7x: add boot phase properties"   Max Merchel
• VisionFive 2 eMMC boot issues.   Milad
• [PATCH v2 4/4] clk: spacemit: k1: remove bus gate from TWSI functional clocks   Troy Mitchell
• [PATCH v2 3/4] i2c: k1: enable both functional and bus clocks   Troy Mitchell
• [PATCH v2 1/4] i2c: k1: fix wrong bus speed setting   Troy Mitchell
• [PATCH v2 1/4] i2c: k1: fix wrong bus speed setting   Troy Mitchell
• [PATCH v2 3/4] i2c: k1: enable both functional and bus clocks   Troy Mitchell
• [PATCH 29/45] doc: board/tbs: update link to TRM   Soeren Moch
• [PATCH 1/9] ram: rockchip: rk3568: Simplify get_info() ops   Stefan Monnier
• [PATCH v4 0/5] Add fastboot to SPL   Stefan Monnier
• [PATCH v4 0/5] Add fastboot to SPL   Stefan Monnier
• [BUG] rockchip: v2026.07 fails to boot on GameForce Ace (RK3588S)   Chris Morgan
• [BUG] rockchip: v2026.07 fails to boot on GameForce Ace (RK3588S)   Chris Morgan
• [BUG] rockchip: v2026.07 fails to boot on GameForce Ace (RK3588S)   Chris Morgan
• [BUG] rockchip: v2026.07 fails to boot on GameForce Ace (RK3588S)   Christopher Morgan
• No subject   Scott Moser
• [PATCH] dm: pci: fix uninitialized fdt_pci_addr fall-through in pci_get_devfn   Scott Moser
• [PATCH v2] dm: pci: fix uninitialized fdt_pci_addr fall-through in pci_get_devfn   Scott Moser
• [PATCH v2] fs: btrfs: fix zstd decompression of compressed inline extents   Cole Munz
• [PATCH] fs: btrfs: report file sizes from readdir   Cole Munz
• [PATCH v2] fs: btrfs: report file sizes from readdir   Cole Munz
• [PATCH] fs: btrfs: report file sizes from readdir   Cole Munz
• [PATCH v3 0/3] fs: btrfs: report file sizes from readdir   Cole Munz
• [PATCH v3 1/3] fs: btrfs: report file sizes from readdir   Cole Munz
• [PATCH v3 2/3] fs: btrfs: release the path when btrfs_search_slot() fails   Cole Munz
• [PATCH v3 3/3] fs: btrfs: deduplicate the inode size lookup   Cole Munz
• [PATCH] lib: zstd: update to latest Linux zstd 1.5.7   Cole Munz
• [PATCH] lib: zstd: update to latest Linux zstd 1.5.7   Cole Munz
• [PATCH] lib: zstd: update to latest Linux zstd 1.5.7   Cole Munz
• [PATCH] lib: zstd: update to latest Linux zstd 1.5.7   Cole Munz
• [PATCH v2] lib: zstd: update to latest Linux zstd 1.5.7   Cole Munz
• [PATCH] spi: Handle spi-{tx,rx}-bus-width 0 as SPI_NO_TX/SPI_NO_RX   Cole Munz
• [PATCH] spi: rockchip: skip the unused FIFO direction on a one-wire device   Cole Munz
• [PATCH v2 0/2] spi: support devices with no wire in one direction   Cole Munz
• [PATCH v2 1/2] spi: Handle spi-{tx, rx}-bus-width 0 as SPI_NO_TX/SPI_NO_RX   Cole Munz
• [PATCH v2 2/2] spi: rockchip: skip the unused FIFO direction on a one-wire device   Cole Munz
• [PATCH v2 2/2] spi: rockchip: skip the unused FIFO direction on a one-wire device   Cole Munz
• [PATCH v3 0/2] spi: support devices with no wire in one direction   Cole Munz
• [PATCH v3 1/2] spi: Handle spi-{tx, rx}-bus-width 0 as SPI_NO_TX/SPI_NO_RX   Cole Munz
• [PATCH v3 2/2] spi: rockchip: skip the unused FIFO direction on a one-wire device   Cole Munz
• [PATCH v2 2/2] spi: rockchip: skip the unused FIFO direction on a one-wire device   Cole Munz
• [PATCH v4 0/2] spi: support devices with no wire in one direction   Cole Munz
• [PATCH v4 1/2] spi: Handle spi-{tx, rx}-bus-width 0 as SPI_NO_TX/SPI_NO_RX   Cole Munz
• [PATCH v4 2/2] spi: rockchip: skip the unused FIFO direction on a one-wire device   Cole Munz
• [PATCH v3] lib: zstd: update to latest Linux zstd 1.5.7   Cole Munz
• [PATCH 1/2] net: nfs: clean up bounds checks in nfs_readlink_reply()   Murtaza
• [PATCH 2/2] net: nfs: reject negative rlen in nfs_read_reply()   Murtaza
• [PATCH v2 00/10] arm64: qcom: Add initial support for Shikra SoC   Aswin Murugan
• [PATCH v2 01/10] arm64: dts: qcom: add initial Shikra device tree support   Aswin Murugan
• [PATCH v2 02/10] clk: qcom: add GCC clock driver support for shikra SoC   Aswin Murugan
• [PATCH v2 03/10] pinctrl: qcom: add driver for shikra SoC   Aswin Murugan
• [PATCH v2 04/10] qcom_defconfig: Enable Shikra clock driver   Aswin Murugan
• [PATCH v2 05/10] phy: qcom: qusb2: add Shikra PHY configuration   Aswin Murugan
• [PATCH v2 06/10] arm64: dts: qcom: shikra: enable USB device mode on IQS EVK   Aswin Murugan
• [PATCH v2 07/10] configs: qcom: add debug UART config fragment for shikra-iqs-evk   Aswin Murugan
• [PATCH v2 08/10] configs: add qcom_shikra_defconfig   Aswin Murugan
• [PATCH v2 09/10] qcom: smem: increase SMEM_HOST_COUNT for newer SMEM versions   Aswin Murugan
• [PATCH v2 10/10] board: qualcomm: add MAINTAINERS entries for Shikra platforms   Aswin Murugan
• [PATCH v3 00/13] arm64: qcom: Add initial support for Shikra SoC   Aswin Murugan
• [PATCH v3 01/13] arm64: dts: qcom: add initial Shikra device tree support   Aswin Murugan
• [PATCH v3 02/13] clk: qcom: add GCC clock driver support for shikra SoC   Aswin Murugan
• [PATCH v3 03/13] pinctrl: qcom: add driver for shikra SoC   Aswin Murugan
• [PATCH v3 04/13] qcom_defconfig: Enable Shikra clock driver   Aswin Murugan
• [PATCH v3 05/13] phy: qcom: qusb2: add Shikra PHY configuration   Aswin Murugan
• [PATCH v3 06/13] arm64: dts: qcom: shikra: enable USB device mode on CQS & IQS EVK   Aswin Murugan
• [PATCH v3 07/13] phy: qcom: add QMP USB3 PHY driver for Shikra   Aswin Murugan
• [PATCH v3 08/13] configs: qcom: enable PHY_QCOM_QMP_USB3_LEGACY   Aswin Murugan
• [PATCH v3 09/13] arm64: dts: shikra: enable USB QMP PHY   Aswin Murugan
• [PATCH v3 10/13] configs: qcom: add debug UART config fragment for shikra-evk   Aswin Murugan
• [PATCH v3 11/13] configs: add shikra defconfig for IQS & CQS boards   Aswin Murugan
• [PATCH v3 12/13] qcom: smem: increase SMEM_HOST_COUNT for newer SMEM versions   Aswin Murugan
• [PATCH v3 13/13] board: qualcomm: add MAINTAINERS entries for Shikra platforms   Aswin Murugan
• [PATCH v1 00/14] arm64: qcom: Add initial support for Nord SoC   Aswin Murugan
• [PATCH v1 01/14] arm64: dts: qcom: add nord SoC and board device trees   Aswin Murugan
• [PATCH v1 02/14] clk: qcom: add GCC driver for nord   Aswin Murugan
• [PATCH v1 03/14] clk: qcom: add NEGCC driver for nord   Aswin Murugan
• [PATCH v1 04/14] clk: qcom: add SEGCC driver for nord   Aswin Murugan
• [PATCH v1 05/14] clk: qcom: add NWGCC driver for nord   Aswin Murugan
• [PATCH v1 06/14] clk: qcom: add TCSRCC driver for nord   Aswin Murugan
• [PATCH v1 07/14] configs: qcom_defconfig: enable nord clock drivers   Aswin Murugan
• [PATCH v1 08/14] pinctrl: qcom: add TLMM driver for nord   Aswin Murugan
• [PATCH v1 09/14] arm: dts: qcom: add UFS overlay for nord-ride   Aswin Murugan
• [PATCH v1 10/14] arm64: dts: qcom: nord-ride: reserve and describe SMEM region   Aswin Murugan
• [PATCH v1 11/14] configs: qcom: add debug UART config fragment for Nord   Aswin Murugan
• [PATCH v1 12/14] configs: add nord defconfig   Aswin Murugan
• [PATCH v1 13/14] arm64: qcom: fix TME IMGAUTH 4K-alignment failure on u-boot.elf   Aswin Murugan
• [PATCH v1 14/14] arm64: qcom: define LDFLAGS_u-boot-elf for 4K ELF granules   Aswin Murugan
• [PATCH v2 0/2] efi: add generic Secure Boot config fragment and user guide   Aswin Murugan
• [PATCH v2 1/2] configs: add generic efi_secureboot.config fragment   Aswin Murugan
• [PATCH v2 2/2] doc: usage: add EFI Secure Boot guide   Aswin Murugan
• [PATCH v1 0/3] qcom: Reduce boot time by avoiding unnecessary initialization and probes   Aswin Murugan
• [PATCH v1 1/3] mach-snapdragon: skip redundant SCSI rescan for capsule updates   Aswin Murugan
• [PATCH v1 2/3] efi_loader: skip fs probe for non-ESP GPT partitions   Aswin Murugan
• [PATCH v1 3/3] configs: qcom: disable malloc pool zero-init on boot   Aswin Murugan
• [PATCH v1 0/3] qcom: Enable HS200/HS400 eMMC modes on Qualcomm platforms   Aswin Murugan
• [PATCH v1 1/3] mmc: msm_sdhci: fix max-frequency read into wrong-sized variable   Aswin Murugan
• [PATCH v1 2/3] mmc: msm_sdhci: add HS200/HS400 support   Aswin Murugan
• [PATCH v1 3/3] configs: qcom: enable CONFIG_MMC_HS400_SUPPORT   Aswin Murugan
• [PATCH v1 0/2] serial: msm_geni: Suppress UART TX when debug cable is disconnected   Aswin Murugan
• [PATCH v1 1/2] serial: msm_geni: Skip UART TX when no cable is connected   Aswin Murugan
• [PATCH v1 2/2] configs: qcom: enable CONFIG_MSM_GENI_SERIAL_CABLE_DETECT   Aswin Murugan
• [PATCH v1] usb: xhci-dwc3: Call xhci_deregister() before asserting reset   NG, BOON KHAI
• [PATCH v1] drivers: clk: agilex5: Setting correct counter frequency in boot mode   NG, BOON KHAI
• [PATCH v1] configs: agilex: enable FPGA Partial Reconfiguration command   NG, BOON KHAI
• [PATCH v1] include: configs: socfpga: Add environment variables for distro boot   NG, BOON KHAI
• [PATCH v1] configs: socfpga: Add QSPI support for Cyclone 5   NG, BOON KHAI
• [QUESTION] Architecture and roadmap for Synopsys XPCS driver with APB3 indirect access   Akash Nair
• [QUESTION] Architecture and roadmap for Synopsys XPCS driver with APB3 indirect access   Akash Nair
• [PATCH 0/5] Enable fastboot support for IPQ9574 based boards   Varadarajan Narayanan
• [PATCH 1/5] clk/qcom: Add USB related clocks for IPQ9574   Varadarajan Narayanan
• [PATCH 2/5] phy: Add IPQ9574 support to Qualcomm QUSB2 phy   Varadarajan Narayanan
• [PATCH 3/5] phy: qcom: Add QMP USB PHY driver   Varadarajan Narayanan
• [PATCH 4/5] configs: ipq9574: Enable fastboot support   Varadarajan Narayanan
• [PATCH 5/5] doc: board/qualcomm: Update RDP flashing instructions   Varadarajan Narayanan
• [PATCH v8 07/15] mach-snapdragon: Kconfig: Add rules to create SPL images   Varadarajan Narayanan
• [PATCH v1 1/2] drivers: fpga: Adding Freeze Bridge for PR console support   Boon Khai Ng
• [PATCH v1 2/2] configs: agilex: enable FPGA Partial Reconfiguration command   Boon Khai Ng
• [PATCH v2] include: configs: socfpga: Add environment variables for distro boot   Boon Khai Ng
• [PATCH v2] configs: socfpga: Add QSPI support for Cyclone 5   Boon Khai Ng
• [PATCH v8 0/8] Improve FIT signature handling   Ludwig Nussel
• [PATCH v8 1/8] test: include mapmem.h explicitly   Ludwig Nussel
• [PATCH v8 2/8] qemu-arm64: merge built-in DT   Ludwig Nussel
• [PATCH v8 3/8] mkimage: define log_err and log_info   Ludwig Nussel
• [PATCH v8 4/8] image-fit-sig: Optionally require signatures   Ludwig Nussel
• [PATCH v8 5/8] test: vboot: handle CONFIG_FIT_REQUIRE_CONFIG_SIGS in test_vboot   Ludwig Nussel
• [PATCH v8 6/8] iminfo: also verify signatures   Ludwig Nussel
• [PATCH v8 7/8] test: vboot: refactor run_bootm   Ludwig Nussel
• [PATCH v8 8/8] test: vboot: add iminfo checks   Ludwig Nussel
• [PATCH v8 4/8] image-fit-sig: Optionally require signatures   Ludwig Nussel
• [PATCH v8 4/8] image-fit-sig: Optionally require signatures   Ludwig Nussel
• [PATCH] stm32mp1: spl: support loading U-Boot proper from eMMC hardware partitions   Sean Nyekjaer
• [RFC PATCH 1/2] tcan4x5x: initial commit   Sean Nyekjaer
• [RFC PATCH 2/2] tcan4x5x: set nwkrq voltage   Sean Nyekjaer
• [PATCH 0/6] Fixes and usability improvements for Layerscape QDS   Vladimir Oltean
• [PATCH 1/6] configs: layerscape qds: disable ENV_RELOC_GD_ENV_ADDR for NOR boot   Vladimir Oltean
• [PATCH 2/6] configs: ls2088aqds_tfa: fix NOR flash write failure   Vladimir Oltean
• [PATCH 3/6] configs: layerscape qds: enable OF_LIBFDT_OVERLAY   Vladimir Oltean
• [PATCH 4/6] configs: layerscape: drop CONFIG_SYS_PBSIZE=532 override   Vladimir Oltean
• [PATCH 5/6] common: kconfig: raise SYS_CBSIZE default to 1024 for FSL_LSCH2/LSCH3   Vladimir Oltean
• [PATCH 6/6] configs: ls104{3,6}aqds_tfa: enable PCIe Ethernet   Vladimir Oltean
• [PATCH 5/6] common: kconfig: raise SYS_CBSIZE default to 1024 for FSL_LSCH2/LSCH3   Vladimir Oltean
• [PATCH] net: fsl_enetc: fix all interfaces getting named enetc-0 on LS1028A   Vladimir Oltean
• Coverity 652910 Uninitialized pointer read   Igor Opaniuk
• [PATCH] iommu: Add RISC-V IOMMU driver   Tim Ouyang
• [PATCH v2 0/1] arm: aspeed: Add ASRock Rack B650D4U BMC support   Prasanth Kumar Padarthi
• [PATCH v2 1/1] arm: aspeed: Add ASRock Rack B650D4U BMC support   Prasanth Kumar Padarthi
• [PATCH v6 0/7] Add support to boot TI K3 HSM M4 core   Beleswar Padhi
• [PATCH v6 1/7] arm: mach-k3: Add config options for packaging HSM firmware   Beleswar Padhi
• [PATCH v6 2/7] arm: dts: k3-{j721s2/j722s/j784s4}-binman: Add template for packing HSM firmware   Beleswar Padhi
• [PATCH v6 3/7] binman: openssl: Add boot and load extensions to x509 cert   Beleswar Padhi
• [PATCH v6 4/7] arm: dts: k3-{j721s2/j722s/j784s4}-r5.dtsi: Enable HSM core   Beleswar Padhi
• [PATCH v6 5/7] remoteproc: k3-hsm: Introduce a remoteproc driver for K3 HSM core   Beleswar Padhi
• [PATCH v6 6/7] arm: mach-k3: r5: common: Invoke boot of HSM M4 core   Beleswar Padhi
• [PATCH v6 7/7] doc: board: ti: k3: Add section for HSM M4F core loading   Beleswar Padhi
• [PATCH] mmc: add option to skip eMMC deinit on OS handoff   박민우 (MW Park)
• [PATCH] mmc: add option to skip eMMC deinit on OS handoff   박민우 (MW Park)
• [PATCH v2] mmc: add option to skip eMMC deinit on OS handoff   박민우 (MW Park)
• [PATCH] mmc: add option to skip eMMC deinit on OS handoff   박민우 (MW Park)
• [PATCH v9 00/19] spacemit mmc driver   Iker Pedrosa
• [PATCH v9 00/19] spacemit mmc driver   Iker Pedrosa
• [PATCH 0/2] Support multiple DDR configs in PX30 TPL   Massimo Pegorer
• [PATCH 1/2] ram: rockchip: improve ddr type configs selection   Massimo Pegorer
• [PATCH 2/2] ram: rockchip: px30: allow multiple DDR types selection   Massimo Pegorer
• [PATCH 0/7] Add support for the NXP MR-NAVQ95 board   Elena Popa
• [PATCH 1/7] arm64: dts: freescale: add the MR-NAVQ95 DTS   Elena Popa
• [PATCH 2/7] arm64: dts: imx95-navq: add nxp,ctrl-ids property   Elena Popa
• [PATCH 3/7] arm64: dts: imx95-navq: add lpi2c3 and subnodes   Elena Popa
• [PATCH 4/7] arm64: dts: imx95-navq: add ENETC 0 support   Elena Popa
• [PATCH 5/7] arm64: dts: imx95-navq: add PF09 and PF53 thermal zones   Elena Popa
• [PATCH 6/7] arm64: dts: imx95-navq: enable USB2/3 and add Type-C nodes   Elena Popa
• [PATCH 7/7] board: nxp: add MR-NAVQ95 board support   Elena Popa
• [EXT] Re: [PATCH 0/7] Add support for the NXP MR-NAVQ95 board   Elena Popa
• [PATCH v6 3/5] binman: ti_secure: drop the redundant keyfile re-read   Sergio Prado
• [PATCH v2 1/1] arm: aspeed: Add ASRock Rack B650D4U BMC support   Prasanth
• [PATCH] fw_env: allow detection of NVMEM device using layout node compatible string   Michael C. Pratt
• [PATCH 0/3] Semi-Falcon Boot Support   Gokul Praveen
• [PATCH 1/3] configs: add semi-falcon mode fragment for k3 devices   Gokul Praveen
• [PATCH 2/3] arm: k3-binman: add tisemifalcon.bin for semi-falcon mode   Gokul Praveen
• [PATCH 3/3] doc: ti: document semi-falcon mode for J784S4 EVM   Gokul Praveen
• [PATCH 0/3] Semi-Falcon Boot Support   Gokul Praveen
• [PATCH 0/3] Semi-Falcon Boot Support   Gokul Praveen
• [PATCH v2 0/3] No-SPL Boot Support   Gokul Praveen
• [PATCH v2 1/3] configs: add no-SPL mode fragment for k3 devices   Gokul Praveen
• [PATCH v2 2/3] arm: k3-binman: add tinospl.bin for direct U-Boot boot   Gokul Praveen
• [PATCH v2 3/3] doc: ti: document no-SPL boot mode for J784S4 EVM   Gokul Praveen
• [PATCH v2 0/3] No-SPL Boot Support   Gokul Praveen
• [PATCH v3 0/3] A-core no-SPL Boot Support   Gokul Praveen
• [PATCH v3 1/3] configs: add A-core no-SPL mode fragment for k3 devices   Gokul Praveen
• [PATCH v3 2/3] arm: k3-binman: add tinospl.bin for direct U-Boot boot   Gokul Praveen
• [PATCH v3 3/3] doc: ti: document A Core no-SPL boot mode for J784S4 EVM   Gokul Praveen
• [PATCH v3 0/3] A-core no-SPL Boot Support   Gokul Praveen
• [PATCH v1 00/12] mips: add EcoNet/Airoha EN75xx (EN7512/EN7528) SoC support   Matheus Sampaio Queiroga
• [SECURITY] Five vulnerabilities in FIT cipher, squashfs, and BOOTP/DHCP handling (mainline, VERSION 2026.07 dev)   Pranav R
• [PATCH v2 2/2] net: bootp: bound DHCP option parsing by the received packet length   Pranav R
• [RFC] disk/part: partition number parsed as hex in blk_get_device_part_str   Raj, Albin
• [PATCH v1 0/2] fs/squashfs: bounds checks on image-controlled offsets   Pranav Rajendran
• [PATCH v1 1/2] fs/squashfs: bound fragment table accesses in sqfs_frag_lookup()   Pranav Rajendran
• [PATCH v1 2/2] fs/squashfs: bound the offset returned by sqfs_dir_offset()   Pranav Rajendran
• [PATCH v1 0/3] fit: cipher: bounds checks on the ciphered image path   Pranav Rajendran
• [PATCH v1 1/3] lib: aes: reject a ciphertext length that is not a whole number of blocks   Pranav Rajendran
• [PATCH v1 2/3] image-fit: check the length of the data-size-unciphered property   Pranav Rajendran
• [PATCH v1 3/3] lib: aes: reject an unciphered size larger than the ciphertext   Pranav Rajendran
• [PATCH v1] net: bootp: bound DHCP option parsing by the received packet length   Pranav Rajendran
• [PATCH v2 0/2] net: bootp: bound DHCP option parsing by the received packet length   Pranav Rajendran
• [PATCH v2 1/2] net: bootp: validate DHCP option length before parsing it   Pranav Rajendran
• [PATCH v2 2/2] net: bootp: bound DHCP option parsing by the received packet length   Pranav Rajendran
• [PATCH v2 0/5] fit: cipher: bounds checks on the ciphered image path   Pranav Rajendran
• [PATCH v2 1/5] lib: aes: reject a ciphertext length that is not a whole number of blocks   Pranav Rajendran
• [PATCH v2 2/5] image-fit: check the length of the data-size-unciphered property   Pranav Rajendran
• [PATCH v2 3/5] lib: aes: reject an unciphered size larger than the ciphertext   Pranav Rajendran
• [PATCH v2 4/5] include: u-boot: aes: make disabled cipher stubs static inline   Pranav Rajendran
• [PATCH v2 5/5] test: boot: add regression tests for the FIT cipher bounds checks   Pranav Rajendran
• [PATCH v3 1/5] ufs: decode string descriptors as UTF-16 big-endian   Jorge Ramirez
• [PATCH v3 2/5] ufs: add RPMB transport over SCSI SECURITY PROTOCOL   Jorge Ramirez
• [PATCH v3 3/5] ufs: derive the per-region RPMB CID and size for OP-TEE   Jorge Ramirez
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v3 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v3 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez
• [PATCH v4 0/5] ufs: rpmb: route OP-TEE RPMB secure storage over UFS   Jorge Ramirez-Ortiz
• [PATCH v4 1/5] ufs: decode string descriptors as UTF-16 big-endian   Jorge Ramirez-Ortiz
• [PATCH v4 2/5] ufs: add RPMB transport over SCSI SECURITY PROTOCOL   Jorge Ramirez-Ortiz
• [PATCH v4 3/5] ufs: derive the per-region RPMB CID and size for OP-TEE   Jorge Ramirez-Ortiz
• [PATCH v4 4/5] optee: rename rpmb.c to rpmb_emmc.c   Jorge Ramirez-Ortiz
• [PATCH v4 5/5] optee: implement the RPMB subsystem interface for UFS   Jorge Ramirez-Ortiz
• [PATCH v3 0/7] riscv: sophgo: Use upstream devicetrees for CV18xx boards   Zhuxu Ran
• [PATCH v3 1/7] clk: sophgo: cv1800b: Add SoC-specific compatible strings   Zhuxu Ran
• [PATCH v3 2/7] mmc: cv1800b: Add SG2002 compatible string   Zhuxu Ran
• [PATCH v3 3/7] riscv: licheerv_nano: Enable hardware system reset   Zhuxu Ran
• [PATCH v3 4/7] riscv: milkv_duo: Use upstream devicetree   Zhuxu Ran
• [PATCH v3 5/7] riscv: licheerv_nano: Use upstream devicetree   Zhuxu Ran
• [PATCH v3 6/7] riscv: dts: sophgo: Drop local CV18xx devicetrees   Zhuxu Ran
• [PATCH v3 7/7] clk: sophgo: cv1800b: Drop legacy compatible string   Zhuxu Ran
• [PATCH v3 4/7] riscv: milkv_duo: Use upstream devicetree   Zhuxu Ran
• [PATCH v4 0/2] BeaglePlay: add ITE IT66121 HDMI bridge driver and enable splash   Shaurya Rane
• [PATCH v4 1/2] video: bridge: add ITE IT66121 DPI-to-HDMI bridge driver   Shaurya Rane
• [PATCH v4 2/2] BeaglePlay: enable IT66121 HDMI bridge and video stack   Shaurya Rane
• [PATCH v2] arm: mach-snapdragon: increase compat buffer size and warn on root compatible string truncation   Vivek Ray
• [PATCH v2] mtd: spinand: add support for Etron SPI-NAND flashes   Miquel Raynal
• [PATCH v3 4/6] mtd: rawnand: zynq: Do not fail the probe for no reason   Miquel Raynal
• [PATCH v3 0/6] mtd: rawnand: zynq: Fixes and software ECC support   Miquel Raynal
• [PATCH 02/11] usb: tcpm: avoid hard reset for sink-only ports on Source_Cap timeout   Sebastian Reichel
• [PATCH v2 01/10] usb: tcpm: avoid hard reset for sink-only ports on Source_Cap timeout   Sebastian Reichel
• [PATCH v2 02/10] usb: tcpm: continue polling after PD negotiation to handle source messages   Sebastian Reichel
• [PATCH v2 03/10] usb: tcpm: add lightweight PD negotiation tracing   Sebastian Reichel
• [PATCH v2 06/10] usb: tcpm: skip state machine for pd-disable ports   Sebastian Reichel
• [PATCH v2 05/10] usb: tcpm: add setup_host_mode/device_mode/disable_src_vbus APIs   Sebastian Reichel
• [PATCH v2 04/10] usb: tcpm: add TCPCI (Type-C Port Controller Interface) driver   Sebastian Reichel
• [PATCH 0/4] sdm845: Configure USB3/DP combo properly   David Heidelberg via B4 Relay
• [PATCH 1/4] phy: qcom: qmp-combo: select PCS register offsets per version   David Heidelberg via B4 Relay
• [PATCH 2/4] phy: qcom: qmp-combo: add SDM845 support   David Heidelberg via B4 Relay
• [PATCH 3/4] power: regulator: qcom-rpmh: add PM8998 support   David Heidelberg via B4 Relay
• [PATCH 4/4] configs: qcom: enable QMP USB3-DP combo PHY   David Heidelberg via B4 Relay
• [PATCH] net: net6: validate IPv6 payload and UDP length on receive   Esteban Alba via B4 Relay
• [PATCH v2] net: net6: validate IPv6 payload and transport lengths on receive   Esteban Alba via B4 Relay
• [PATCH] pci: pcie_dw_rockchip: add PCIe reset configuration delay   Oleg Kombarov via B4 Relay
• [PATCH v2 1/2] board: phycore_imx8mm: update RAM timings   Teresa Remmet
• [PATCH v2 2/2] board: phycore_imx8mm: add 1 and 4GB RAM timings   Teresa Remmet
• merge software ecdsa support   Philippe Reynes
• merge software ecdsa support   Philippe Reynes
• merge software ecdsa support   Tom Rini
• [PATCH 4/4] configs: mediatek: drop no longer needed PINCTRL options   Tom Rini
• [PATCH 2/3] qemu-x86: Wire support for applying capsule updates to pflash   Tom Rini
• [PATCH] arm: Backward compatibility to U-Boot v2020.04   Tom Rini
• [PATCH v2] CI: add Qualcomm requirements.txt for world build   Tom Rini
• [security] Report of possible arbitrary memory overwrite in U-Boot's EFI PE/COFF loader (ANT-2026-1K18JRMA)   Tom Rini
• [SECURITY] U-Boot: unvalidated IPv6 UDP length in net_ip6_handler() yields pre-auth OOB write / RCE via the DHCPv6 client (net/net6.c, net/dhcpv6.c)   Tom Rini
• Pull request: rpi-2026.10 rc1   Tom Rini
• [PULL] u-boot-usb/main   Tom Rini
• [PULL] u-boot-sh/main   Tom Rini
• Pull request for fwu-main-03082026   Tom Rini
• Please pull u-boot-watchdog/main   Tom Rini
• [GIT PULL] u-boot-riscv/main   Tom Rini
• [GIT PULL v2] Please pull mediatek-for-main-2026-08-05 into main   Tom Rini
• [PATCH] Gitlab CI: sage: Disable test_net_tftpboot_boot on Raspberry Pi 4 for now   Tom Rini
• [PATCH] toradex: select EVENT for TDX_CFG_BLOCK   Tom Rini
• [GIT PULL] Please pull u-boot-imx-main-20260807   Tom Rini
• [PATCH] pylibfdt: Grow the FdtSw buffer geometrically   Tom Rini
• [PATCH] pylibfdt: Grow the FdtSw buffer geometrically   Tom Rini
• [PATCH 11/11] spl: Use CONFIG_IS_ENABLED() for LIBCOMMON_SUPPORT checks   Tom Rini
• [PATCH] pylibfdt: Grow the FdtSw buffer geometrically   Tom Rini
• [PATCH] board_f: Make printing reset information optional   Tom Rini
• [PATCH 1/3] bootm: size the noload decompression buffer from the compressor header   Tom Rini
• [PATCH] board_f: Call initf_malloc() before fdtdec_setup()   Tom Rini
• [PULL] u-boot-sh/main   Tom Rini
• [PULL] u-boot-usb/main   Tom Rini
• [RFC] disk/part: partition number parsed as hex in blk_get_device_part_str   Tom Rini
• [PATCH 1/3] bootm: size the noload decompression buffer from the compressor header   Tom Rini
• [PATCH] boot: image-fdt: suppress spurious error on expected reservation failures   Tom Rini
• [PATCH] mtd: cfi: Replace env_get_f() with env_get_yesno()   Tom Rini
• [PATCH] mtd: cfi: Replace env_get_f() with env_get_yesno()   Tom Rini
• [PATCH] cmd: scsi: Drop duplicate leading scsi prefix   Tom Rini
• [PATCH v5] serial: coreboot: Accept DBG2 subtype 0x12   Tom Rini
• [PATCH v4 0/3] boot: fit: authenticate the dm-verity roothash   Tom Rini
• [PATCH] arm: mach-k3: j784s4: Add clk and power support for main_uart2 and main_uart3   Tom Rini
• [PATCH] bootretry: only reinitialize retry_time when bootretry env variable has been touched   Tom Rini
• [PATCH v3] Makefile: depend on OF_LIST dts sources for fit-dtb.blob   Tom Rini
• [PATCH] board_f: Call initf_malloc() before fdtdec_setup()   Tom Rini
• [PATCH v3 0/3] fs: btrfs: report file sizes from readdir   Tom Rini
• [PATCH v2] tools: fit: sign all config image references   Tom Rini
• [PATCH] global_data: Only include driver model fields when DM is enabled   Tom Rini
• [ANN] U-Boot v2026.10-rc2 released   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH v2 1/2] include: linux: Import hw_bitfield.h from Linux v6.18   Tom Rini
• [PULL] Please pull qcom-next   Tom Rini
• [PATCH] boot: image-fdt: suppress spurious error on expected reservation failures   Tom Rini
• [PULL] Please pull qcom-next   Tom Rini
• [GIT PULL] Please pull fsl-qoriq-for-2026.10-rc3 for main   Tom Rini
• [PATCH 0/8] HPE GXP: board information and dynamic DTB configuration   Tom Rini
• [PATCH 0/2] Fix negation on modern hush shell   Tom Rini
• [PATCH 0/5] lib: resync lib/div64.c and <linux/math64.h> with Linux v7.1   Tom Rini
• [PATCHv5 0/3] k3-am62-pocketbeagle2: add board and variant support   Tom Rini
• [RESEND PATCH v2 0/2] Add LoongArch support for CI image   Tom Rini
• [PATCH 0/4] Add eMMC support for Axiado SCM3005 board   Tom Rini
• [PATCH 1/3] bootm: size the noload decompression buffer from the compressor header   Tom Rini
• Problem with test/py/tests/test_fit_verity.py?   Tom Rini
• [GIT PULL] amd/xilinx patches for v2025.10-rc3   Tom Rini
• Please pull net-20260813   Tom Rini
• [GIT PULL] Please pull u-boot-rockchip-2026.10-20260813 into main   Tom Rini
• [PATCH main] arm: dts: k3-am625-beagleplay: add bootph tags to pmic regulators   Tom Rini
• [PATCH] pylibfdt: Replace removed SWIG Python 2 compatibility macros   Tom Rini
• [ANN] Further mailman updates   Tom Rini
• [GIT PULL] Please pull u-boot-rockchip-2027.01-20260813 into next   Tom Rini
• [PATCH] airoha: add support for Airoha AN7583 SoC   Tom Rini
• [PATCH] spl: Fix link when LZMA is enabled without legacy image format support   Tom Rini
• [PATCH] board_f: Make printing reset information optional   Tom Rini
• [PATCH] binman: Do not dedent docstrings twice on Python 3.13+   Tom Rini
• [PATCH] spl: fit: Fill in the image descriptor when skipping a zero-size image   Tom Rini
• [PATCH v2] arm: dts: Add SD dts for the sc598 EZKIT   Tom Rini
• [PATCH] configs: sc598-som-ezlite: select EV-SOMCRR-EZLITE carrier   Tom Rini
• [PATCH v2 1/1] arm: aspeed: Add ASRock Rack B650D4U BMC support   Tom Rini
• [PATCH v2] pytest: fix out of bounds access to bad_pattern_ids   Tom Rini
• [PATCH v3 01/13] arm64: dts: qcom: add initial Shikra device tree support   Tom Rini
• [PATCH 0/3] Semi-Falcon Boot Support   Tom Rini
• [PATCH v2 2/2] test: cmd: add a test for bootd   Tom Rini
• [PATCH] lib: zstd: update to latest Linux zstd 1.5.7   Tom Rini
• [PATCH] lib: zstd: update to latest Linux zstd 1.5.7   Tom Rini
• [PATCH v4 0/7] mkimage: detect FIT image load address overlaps   Tom Rini
• [PATCH] board: beagle: beagleplay: rm-cfg: resync with am62x   Tom Rini
• [PATCH] lib: zstd: update to latest Linux zstd 1.5.7   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20260807   Tom Rini
• [PATCH] arm: rockchip: spl: Add hotkey detection support.   Tom Rini
• [SECURITY] Five vulnerabilities in FIT cipher, squashfs, and BOOTP/DHCP handling (mainline, VERSION 2026.07 dev)   Tom Rini
• [GIT PULL] SoCFPGA updates for next (2026-08-17)   Tom Rini
• [PATCH v1 13/14] arm64: qcom: fix TME IMGAUTH 4K-alignment failure on u-boot.elf   Tom Rini
• [PATCH v1 14/14] arm64: qcom: define LDFLAGS_u-boot-elf for 4K ELF granules   Tom Rini
• [PATCH 1/3] bootm: size the noload decompression buffer from the compressor header   Tom Rini
• [PATCH v2 8/8] arm: u8500: Give Golden panel regulators unique names   Tom Rini
• [PATCH 0/3] Semi-Falcon Boot Support   Tom Rini
• [PATCH v2 1/4] x86: qemu: Describe pflash   Tom Rini
• [PATCH v2] buildman: Differentiate 32-bit and 64-bit LoongArch variants   Tom Rini
• [PATCH] global_data: Only include driver model fields when DM is enabled   Tom Rini
• [GIT PULL] SoCFPGA updates for next (2026-08-17)   Tom Rini
• [GIT PULL] SoCFPGA updates for next (2026-08-17)   Tom Rini
• [PATCH v2 0/3] No-SPL Boot Support   Tom Rini
• [PATCH v2 0/8] bootm: size the noload buffer from the compressor header   Tom Rini
• [PATCH v3 0/6] gpio: improve claim diagnostics and fix gpio-delay offset handling   Tom Rini
• [PATCH 0/3] test: dm: add sandbox coverage for gpio-delay   Tom Rini
• [ANN] Further mailman updates   Tom Rini
• [GIT PULL] SoCFPGA updates for next (2026-08-17)   Tom Rini
• [PATCH 1/1] tools: build mkeficapsule for CONFIG_EFI_HAVE_CAPSULE_SUPPORT=y   Tom Rini
• [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth.   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-20260819 into main   Tom Rini
• [PATCH v2 0/2] gunzip: Fix spurious Z_BUF_ERROR in chunked gzwrite decompression   Tom Rini
• [RESEND PATCH 0/2] sc59x: Disable CONFIG_EFI_LOADER   Tom Rini
• [PATCH] test: dm: hash: check digest size before memset   Tom Rini
• [PULL] u-boot-sh/main   Tom Rini
• [PATCH] rng: Fix build with SPL/TPL   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-next-20260819 into next   Tom Rini
• [PATCH v1] env: Fix compile error for envtools   Tom Rini
• [PATCH v3 03/19] image: Take entry point as an output of setup_booti   Tom Rini
• [PATCH v3 10/19] LoongArch: Boot Image bits   Tom Rini
• [PATCH v3 14/19] board: emulation: Add qemu-loongarch   Tom Rini
• [PATCH v3 19/19] CI: Wire up qemu-loongarch64   Tom Rini
• [PATCH v2 0/8] bootm: size the noload buffer from the compressor header   Tom Rini
• [PATCH v6 01/87] usb: host: re-import xhci-ext-caps.h from kernel v6.16   Tom Rini
• [PATCH 0/2] MAINTAINERS: Cleanup non existing files   Tom Rini
• [PATCH] MAINTAINERS: Drop reference to non-existent drivers/sysinfo/gxp.h   Tom Rini
• [PATCH 0/2] MAINTAINERS: Cleanup non existing files   Tom Rini
• [PATCH] CI: Run scripts/check_maintainers_files.sh in the existing MAINTAINERS job   Tom Rini
• [PATCH 0/2] MAINTAINERS: Cleanup non existing files   Tom Rini
• [PATCH] MAINTAINERS: Drop reference to non-existent drivers/sysinfo/gxp.h   Tom Rini
• [PATCH v1 0/7] bootstd: Fix crashes and memory leaks on scan/boot error paths   Tom Rini
• [PATCH 0/8] toradex: Decouple from Toradex product ID table   Tom Rini
• [PATCH v3 1/2] cmd: allow bootd without bootm   Tom Rini
• [PATCH v3 10/19] LoongArch: Boot Image bits   Tom Rini
• [PATCH v3 10/19] LoongArch: Boot Image bits   Tom Rini
• [PATCH v3 14/19] board: emulation: Add qemu-loongarch   Tom Rini
• [PATCH v2] fs: btrfs: fix zstd decompression of compressed inline extents   Tom Rini
• [PATCH] Makefile: fix dtbs_check target   Tom Rini
• [PATCH] doc: ti: k3: Fix pseudo DTS syntax   Tom Rini
• [PATCH] pinctrl: airoha: sync with linux-7.3 driver   Tom Rini
• [PATCH 1/1] disk: drop Amiga partition table support   Tom Rini
• [PATCH] MAINTAINERS: mmc: Add myself as a reviewer   Tom Rini
• [PATCH v6 01/87] usb: host: re-import xhci-ext-caps.h from kernel v6.16   Tom Rini
• [PATCH v6 01/87] usb: host: re-import xhci-ext-caps.h from kernel v6.16   Tom Rini
• [PATCH RFC] scripts: pass dtc cpp flags via a GCC response file   Tom Rini
• [PATCH] MAINTAINERS: Remove unused emails   Tom Rini
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Tom Rini
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Tom Rini
• [PATCH 2/2] Clean up emails from non-existing domains   Tom Rini
• [PATCH RFC] scripts: pass dtc cpp flags via a GCC response file   Tom Rini
• [PATCH 2/6] rockchip: rk3506: Update ENV_MEM_LAYOUT_SETTINGS   Tom Rini
• [PATCH] pinctrl: airoha: sync with linux-7.3 driver   Tom Rini
• [PATCH 00/17] pylibfdt: Update the U-Boot version with changes from upstream dtc   Tom Rini
• [PATCH 0/6] disk: Fix the GPT layout on media with large logical blocks   Tom Rini
• [PATCH v2 0/2] Correct behavior of BLOBLIST_PASSAGE_MANDATORY   Tom Rini
• [PATCH v2 1/2] lib/fdtdec.c: Disallow overriding BLOBLIST_PASSAGE_MANDATORY   Tom Rini
• [PATCH v2 2/2] vexpress64: Correct CONFIG symbol logic around device tree passage   Tom Rini
• [PATCH v2 0/5] Fix logic of OF_OMIT_DTB and remove useless dts files   Tom Rini
• [PATCH v2 1/5] dts: Correct behavior of OF_OMIT_DTB   Tom Rini
• [PATCH v2 2/5] dts: Make DEFAULT_DEVICE_TREE depend on !OF_OMIT_DTB   Tom Rini
• [PATCH v2 3/5] dts: Correct entry for OF_OMIT_DTB   Tom Rini
• [PATCH v2 4/5] powerpc: drop qemu-ppce500 dts   Tom Rini
• [PATCH v2 5/5] arm: Drop unused dts files   Tom Rini
• [PATCH v3 3/4] spl: fit: Harden external-data offset and size arithmetic   Tom Rini
• [PATCH 5/9] boot: add imagemap on-demand loading from storage   Tom Rini
• [PATCH 0/9] boot: add imagemap on-demand image loading from storage   Tom Rini
• [PATCH] disk: ubi: use a format string when copying the volume name   Tom Rini
• [PATCH v2 0/3] boot: image-fdt: Restore suppression of irrelevant ERROR message   Tom Rini
• [ANN] U-Boot v2026.10-rc3 released   Tom Rini
• [PATCH RFC] scripts: pass dtc cpp flags via a GCC response file   Tom Rini
• [PATCH 2/2] Clean up emails from non-existing domains   Tom Rini
• [PATCH 5/6] common: kconfig: raise SYS_CBSIZE default to 1024 for FSL_LSCH2/LSCH3   Tom Rini
• [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth.   Tom Rini
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Tom Rini
• [PATCH next 00/45] doc: fix some issues reported by linkcheck   Tom Rini
• Updated next branch to v7.2-dts tag   Tom Rini
• [PATCH] arm64: dts: renesas: Drop bootph-all from PRR node on R-Car Gen5 R8A78000 X5H   Tom Rini
• [PATCH v3 1/2] dm: core: read the device tree into plat data after pinctrl   Tom Rini
• [PATCH v1] env: Fix compile error for envtools   Tom Rini
• [PATCH] cmd: CMD_PCI depends on PCI   Tom Rini
• [PATCH] CI: Sage: Enable CMD_PCI on Raspberry Pi 3 builds   Tom Rini
• [PATCH 3/6] disk: part_mac: Fix stack corruption on devices with large blocks   Tom Rini
• [GIT PULL] Please pull mediatek-for-next-2026-08-24 into next   Tom Rini
• Please pull u-boot-i2c   Tom Rini
• [PATCH v1 02/12] mips: en75xx: add TPL and SPL early boot stages   Tom Rini
• [PATCH v1 09/12] mips: dts: add EcoNet EN75xx device trees   Tom Rini
• [PATCH v1 11/12] board: econet: add EN7528 board support   Tom Rini
• [PATCH v1 05/12] mtd: spi-nand: add EN75 BMT bad-block management support   Tom Rini
• [PATCH v1 11/12] board: econet: add EN7528 board support   Tom Rini
• [PATCH v1 00/12] mips: add EcoNet/Airoha EN75xx (EN7512/EN7528) SoC support   Tom Rini
• [PATCH v1 08/12] boot: image: add weak hooks for the decompression buffer and flush   Tom Rini
• [PATCH v1 07/12] mtd: env, cmd: add EN75 NAND remap handling   Tom Rini
• [PATCH v1 00/12] mips: add EcoNet/Airoha EN75xx (EN7512/EN7528) SoC support   Tom Rini
• [PATCH v3] tools: fit: sign all config image references   Tom Rini
• [PATCH v1 00/12] mips: add EcoNet/Airoha EN75xx (EN7512/EN7528) SoC support   Tom Rini
• [PATCH v1 1/6] usb: dwc3: core: only provide legacy gadget IRQ handler when USB_DWC3_GADGET   Tom Rini
• [SPL] ELF loader support - design discussion   Tom Rini
• [PATCH] u-boot: fix error check in eth init   Tom Rini
• [PATCH] u-boot: fix error check in eth init   Tom Rini
• [PATCH v2 0/2] fs/squashfs: fix directory table integer overflow   Tom Rini
• [PATCH] blkcache: include the hardware partition in the cache key   Tom Rini
• [PATCH v3 0/2] video: bmp: fix out-of-bounds write in the RLE8 decoder   Tom Rini
• [PATCH] disk: part_mac: Remove the Apple Partition Map driver   Tom Rini
• [PATCH 2/2] Makefile: drop GNU Make < 4.0 compatibility code   Tom Rini
• merge software ecdsa support   Tom Rini
• [SPL] ELF loader support - design discussion   Tom Rini
• [PATCH v1 0/2] fs/squashfs: bounds checks on image-controlled offsets   Tom Rini
• [PATCH v2 0/2] fs/squashfs: fix directory table integer overflow   Tom Rini
• [PATCH 0/3] Add RITY devicetree preparation support   Tom Rini
• [PATCH] include/env.h: use plain old #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG   Tom Rini
• [PATCH] scripts: fix CONFIG_ARM64 conditional in upstream_dtsi_include   Tom Rini
• [PATCH v3] fdt: Fix phandles not copying when using templates   Tom Rini
• [PATCH v2 0/2] Refactor binman nodes for boot binaries for TI AM625 into templates   Tom Rini
• [PATCH 0/2] fs/squashfs: fix two out-of-bounds reads on crafted images   Tom Rini
• [PATCH] fix non-existing sysam.it domain   Tom Rini
• (subset) [PATCH 1/2] MAINTAINERS: Use proper Orphan status marking   Tom Rini
• [PATCH] test: boot: measurement: Fix compilation for non-sandbox builds   Tom Rini
• [PATCH] rng: Fix build with SPL/TPL   Tom Rini
• [PATCH v2 0/7] Cleanup MAINTAINERS entries   Tom Rini
• [PATCH v2 1/7] scripts: Check F: entries in all MAINTAINERS files   Tom Rini
• [PATCH v2 2/7] MAINTAINERS: tegra: Update and correct entries   Tom Rini
• [PATCH v2 3/7] MAINTAINERS: rockchip: Use N for rk3576-nanopi-r76s   Tom Rini
• [PATCH v2 4/7] MAINTAINERS: Fix "typo" and similar incorrect entries   Tom Rini
• [PATCH v2 5/7] MAINTAINERS: Correct entries missed during renames   Tom Rini
• [PATCH v2 6/7] MAINTAINERS: Removed files   Tom Rini
• [PATCH v2 7/7] CI: Run scripts/check_maintainers_files.sh in the existing MAINTAINERS job   Tom Rini
• [PATCH 00/14] board: ti: update and correct files MAINTAINERS entries   Tom Rini
• [PATCH v2 2/7] MAINTAINERS: tegra: Update and correct entries   Tom Rini
• [PATCH v2 2/7] MAINTAINERS: tegra: Update and correct entries   Tom Rini
• [PATCH v4] test/py: nand: Add tests for NAND flash device   Tom Rini
• [GIT PULL] Please pull u-boot-rockchip-2027.01-20260828 into next   Tom Rini
• Pull request efi-2026-10-rc4   Tom Rini
• [PATCH v2 6/7] MAINTAINERS: Removed files   Tom Rini
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Tom Rini
• [PATCH v3] lib: zstd: update to latest Linux zstd 1.5.7   Tom Rini
• [PATCH 1/1] disk: drop Amiga partition table support   Tom Rini
• [PATCH] disk: part_mac: Remove the Apple Partition Map driver   Tom Rini
• [PATCH] u-boot: fix error check in eth init   Tom Rini
• [PATCH RESEND v2 0/5] watchdog: report effective timeout   Juuso Rinta
• [PATCH RESEND v2 1/5] watchdog: wdt-uclass: report effective timeout in start print   Juuso Rinta
• [PATCH RESEND v2 2/5] watchdog: sbsa_gwdt: set max_timeout_ms in probe   Juuso Rinta
• [PATCH RESEND v2 3/5] watchdog: octeontx_wdt: set max_timeout_ms in probe   Juuso Rinta
• [PATCH RESEND v2 4/5] watchdog: sandbox_wdt: set max_timeout_ms in probe   Juuso Rinta
• [PATCH RESEND v2 5/5] test: wdt: add a test for max_timeout_ms   Juuso Rinta
• [PATCH v3 0/6] watchdog: report effective timeout   Juuso Rinta
• [PATCH v3 1/6] watchdog: wdt-uclass: rename str to svc_str in wdt_start()   Juuso Rinta
• [PATCH v3 2/6] watchdog: wdt-uclass: report effective timeout in start print   Juuso Rinta
• [PATCH v3 3/6] watchdog: sbsa_gwdt: set max_timeout_ms in probe   Juuso Rinta
• [PATCH v3 4/6] watchdog: octeontx_wdt: set max_timeout_ms in probe   Juuso Rinta
• [PATCH v3 5/6] watchdog: sandbox_wdt: set max_timeout_ms in probe   Juuso Rinta
• [PATCH v3 6/6] test: wdt: add a test for max_timeout_ms   Juuso Rinta
• Pull request: rpi-2026.10 rc1   Peter Robinson
• [PATCH v2] rpi: copy /chosen/bootloader partition and set boot_partition   Peter Robinson
• [PATCH 2/6] disk: part_efi: Add missing endianness conversions   Peter Robinson
• [PATCH v3] rpi: copy /chosen/bootloader partition and set boot_partition   Peter Robinson
• [PATCH] pylibfdt: Replace removed SWIG Python 2 compatibility macros   Peter Robinson
• [PATCH v1 00/23] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A)   Peter Robinson
• [PATCH 0/8] net: mrmac: Fix Rx packet loss on back-to-back frames   Peter Robinson
• [PATCH v1 00/23] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A)   Peter Robinson
• [PATCH v1 00/23] board: nxp: add the Free Mobile Nodebox v3 CPU Module (LX2160A)   Peter Robinson
• [PATCH v2 5/5] arm: Drop unused dts files   Peter Robinson
• [PATCH] net: lwip: support syslog   Peter Robinson
• [PATCH 2/2] Clean up emails from non-existing domains   Peter Robinson
• [PATCH v2 0/6] fs: Add 9P filesystem support over virtio   Peter Robinson
• [PATCH v2 0/3] Add RITY devicetree preparation support   Peter Robinson
• [PATCH v2 0/3] Add RITY devicetree preparation support   Peter Robinson
• [PATCH] arm: imx: initialize the system counter earlier on i.MX7   Stefan Roese
• [PATCH 1/2] cyclic: get rid of cyclic_get_list() helper   Stefan Roese
• [PATCH 2/2] cyclic: return early from cyclic_run() if the list is empty   Stefan Roese
• [PATCH 1/2] cyclic: get rid of cyclic_get_list() helper   Stefan Roese
• [PATCH 2/2] cyclic: return early from cyclic_run() if the list is empty   Stefan Roese
• [PATCH] watchdog: ast2600: add AST2700 support   Stefan Roese
• Please pull u-boot-watchdog/main   Stefan Roese
• [PATCH] mtd: cfi: Replace env_get_f() with env_get_yesno()   Stefan Roese
• [PATCH v3 0/6] watchdog: report effective timeout   Stefan Roese
• [PATCH v5 00/75] usb: dwc3: sync code with Linux v6.16   Anders Roxell
• [PATCH v5 00/75] usb: dwc3: sync code with Linux v6.16   Anders Roxell
• [PATCH v6 00/87] usb: dwc3: sync code with Linux v6.16   Anders Roxell
• [PATCH v6 01/87] usb: host: re-import xhci-ext-caps.h from kernel v6.16   Anders Roxell
• [PATCH v6 02/87] usb: dwc3: restore to original v3.19-rc1 kernel import   Anders Roxell
• [PATCH v6 03/87] usb: dwc3: import from kernel v3.19   Anders Roxell
• [PATCH v6 04/87] usb: dwc3: import from kernel v4.0   Anders Roxell
• [PATCH v6 05/87] usb: dwc3: import from kernel v4.1   Anders Roxell
• [PATCH v6 06/87] usb: dwc3: import from kernel v4.2   Anders Roxell
• [PATCH v6 07/87] usb: dwc3: import from kernel v4.3   Anders Roxell
• [PATCH v6 08/87] usb: dwc3: import from kernel v4.4   Anders Roxell
• [PATCH v6 09/87] usb: dwc3: import from kernel v4.5   Anders Roxell
• [PATCH v6 10/87] usb: dwc3: import from kernel v4.6   Anders Roxell
• [PATCH v6 11/87] usb: dwc3: import from kernel v4.7   Anders Roxell
• [PATCH v6 12/87] usb: dwc3: import from kernel v4.8   Anders Roxell
• [PATCH v6 13/87] usb: dwc3: import from kernel v4.9   Anders Roxell
• [PATCH v6 14/87] usb: dwc3: import from kernel v4.10   Anders Roxell
• [PATCH v6 15/87] usb: dwc3: import from kernel v4.11   Anders Roxell
• [PATCH v6 16/87] usb: dwc3: import from kernel v4.12   Anders Roxell
• [PATCH v6 17/87] usb: dwc3: import from kernel v4.13   Anders Roxell
• [PATCH v6 18/87] usb: dwc3: import from kernel v4.14   Anders Roxell
• [PATCH v6 19/87] usb: dwc3: import from kernel v4.15   Anders Roxell
• [PATCH v6 20/87] usb: dwc3: import from kernel v4.16   Anders Roxell
• [PATCH v6 21/87] usb: dwc3: import from kernel v4.17   Anders Roxell
• [PATCH v6 22/87] usb: dwc3: import from kernel v4.18   Anders Roxell
• [PATCH v6 23/87] usb: dwc3: import from kernel v4.19   Anders Roxell
• [PATCH v6 24/87] usb: dwc3: import from kernel v4.20   Anders Roxell
• [PATCH v6 25/87] usb: dwc3: import from kernel v5.0   Anders Roxell
• [PATCH v6 26/87] usb: dwc3: import from kernel v5.1   Anders Roxell
• [PATCH v6 27/87] usb: dwc3: import from kernel v5.2   Anders Roxell
• [PATCH v6 28/87] usb: dwc3: import from kernel v5.3   Anders Roxell
• [PATCH v6 29/87] usb: dwc3: import from kernel v5.4   Anders Roxell
• [PATCH v6 30/87] usb: dwc3: import from kernel v5.5   Anders Roxell
• [PATCH v6 31/87] usb: dwc3: import from kernel v5.6   Anders Roxell
• [PATCH v6 32/87] usb: dwc3: import from kernel v5.7   Anders Roxell
• [PATCH v6 33/87] usb: dwc3: import from kernel v5.8   Anders Roxell
• [PATCH v6 34/87] usb: dwc3: import from kernel v5.9   Anders Roxell
• [PATCH v6 35/87] usb: dwc3: import from kernel v5.10   Anders Roxell
• [PATCH v6 36/87] usb: dwc3: import from kernel v5.11   Anders Roxell
• [PATCH v6 37/87] usb: dwc3: import from kernel v5.12   Anders Roxell
• [PATCH v6 38/87] usb: dwc3: import from kernel v5.13   Anders Roxell
• [PATCH v6 39/87] usb: dwc3: import from kernel v5.14   Anders Roxell
• [PATCH v6 40/87] usb: dwc3: import from kernel v5.15   Anders Roxell
• [PATCH v6 41/87] usb: dwc3: import from kernel v5.16   Anders Roxell
• [PATCH v6 42/87] usb: dwc3: import from kernel v5.17   Anders Roxell
• [PATCH v6 43/87] usb: dwc3: import from kernel v5.18   Anders Roxell
• [PATCH v6 44/87] usb: dwc3: import from kernel v5.19   Anders Roxell
• [PATCH v6 45/87] usb: dwc3: import from kernel v6.0   Anders Roxell
• [PATCH v6 46/87] usb: dwc3: import from kernel v6.1   Anders Roxell
• [PATCH v6 47/87] usb: dwc3: import from kernel v6.2   Anders Roxell
• [PATCH v6 48/87] usb: dwc3: import from kernel v6.3   Anders Roxell
• [PATCH v6 49/87] usb: dwc3: import from kernel v6.4   Anders Roxell
• [PATCH v6 50/87] usb: dwc3: import from kernel v6.5   Anders Roxell
• [PATCH v6 51/87] usb: dwc3: import from kernel v6.6   Anders Roxell
• [PATCH v6 52/87] usb: dwc3: import from kernel v6.7   Anders Roxell
• [PATCH v6 53/87] usb: dwc3: import from kernel v6.8   Anders Roxell
• [PATCH v6 54/87] usb: dwc3: import from kernel v6.9   Anders Roxell
• [PATCH v6 55/87] usb: dwc3: import from kernel v6.10   Anders Roxell
• [PATCH v6 56/87] usb: dwc3: import from kernel v6.11   Anders Roxell
• [PATCH v6 57/87] usb: dwc3: import from kernel v6.12   Anders Roxell
• [PATCH v6 58/87] usb: dwc3: import from kernel v6.13   Anders Roxell
• [PATCH v6 59/87] usb: dwc3: import from kernel v6.14   Anders Roxell
• [PATCH v6 60/87] usb: dwc3: import from kernel v6.15   Anders Roxell
• [PATCH v6 61/87] usb: dwc3: import from kernel v6.16   Anders Roxell
• [PATCH v6 62/87] usb: gadget: re-import epautoconf.c from kernel v6.16   Anders Roxell
• [PATCH v6 63/87] usb: udc: re-import udc-core.c from kernel v6.16   Anders Roxell
• [PATCH v6 64/87] dm: add helpers needed by the resynced DWC3 code   Anders Roxell
• [PATCH v6 65/87] usb: phy: add the usb_phy helpers needed by the resynced DWC3 code   Anders Roxell
• [PATCH v6 66/87] usb: gadget: adapt the gadget API after the resync   Anders Roxell
• [PATCH v6 67/87] usb: gadget: udc: make udc-core build in u-boot   Anders Roxell
• [PATCH v6 68/87] usb: dwc3: make the core driver build in u-boot   Anders Roxell
• [PATCH v6 69/87] usb: dwc3: bring back the samsung usb phy driver   Anders Roxell
• [PATCH v6 70/87] usb: dwc3: make gadget and ep0 build in u-boot   Anders Roxell
• [PATCH v6 71/87] usb: gadget: udc: enable async callbacks on bind   Anders Roxell
• [PATCH v6 72/87] usb: dwc3: ep0: flush and invalidate cache around ep0 transfers   Anders Roxell
• [PATCH v6 73/87] usb: dwc3: make the am62 glue build in u-boot   Anders Roxell
• [PATCH v6 74/87] usb: gadget: ci_udc: move to the udc-core registration   Anders Roxell
• [PATCH v6 75/87] usb: gadget: ci_udc: set endpoint capabilities   Anders Roxell
• [PATCH v6 76/87] usb: gadget: dwc2_udc_otg: fix up after the resync   Anders Roxell
• [PATCH v6 77/87] usb: gadget: fix up the function drivers after the resync   Anders Roxell
• [PATCH v6 78/87] usb: gadget: fix up the last UDC drivers after the resync   Anders Roxell
• [PATCH v6 79/87] usb: gadget: atmel_usba_udc: set endpoint capabilities   Anders Roxell
• [PATCH v6 80/87] usb: gadget: at91_udc: register with udc-core   Anders Roxell
• [PATCH v6 81/87] usb: gadget: at91_udc: set endpoint capabilities   Anders Roxell
• [PATCH v6 82/87] usb: musb-new: fix up after the resync   Anders Roxell
• [PATCH v6 83/87] usb: musb-new: set endpoint capabilities   Anders Roxell
• [PATCH v6 84/87] usb: mtu3: fix up after the resync   Anders Roxell
• [PATCH v6 01/87] usb: host: re-import xhci-ext-caps.h from kernel v6.16   Anders Roxell
• [PATCH v6 01/87] usb: host: re-import xhci-ext-caps.h from kernel v6.16   Anders Roxell
• [PATCH v7 00/63] usb: dwc3: part 1, reset and import from Linux v6.16   Anders Roxell
• [PATCH v7 01/63] usb: host: re-import xhci-ext-caps.h from kernel v6.16   Anders Roxell
• [PATCH v7 02/63] usb: dwc3: restore to original v3.19-rc1 kernel import   Anders Roxell
• [PATCH v7 03/63] usb: dwc3: import from kernel v3.19   Anders Roxell
• [PATCH v7 04/63] usb: dwc3: import from kernel v4.0   Anders Roxell
• [PATCH v7 05/63] usb: dwc3: import from kernel v4.1   Anders Roxell
• [PATCH v7 06/63] usb: dwc3: import from kernel v4.2   Anders Roxell
• [PATCH v7 07/63] usb: dwc3: import from kernel v4.3   Anders Roxell
• [PATCH v7 08/63] usb: dwc3: import from kernel v4.4   Anders Roxell
• [PATCH v7 09/63] usb: dwc3: import from kernel v4.5   Anders Roxell
• [PATCH v7 10/63] usb: dwc3: import from kernel v4.6   Anders Roxell
• [PATCH v7 11/63] usb: dwc3: import from kernel v4.7   Anders Roxell
• [PATCH v7 12/63] usb: dwc3: import from kernel v4.8   Anders Roxell
• [PATCH v7 13/63] usb: dwc3: import from kernel v4.9   Anders Roxell
• [PATCH v7 14/63] usb: dwc3: import from kernel v4.10   Anders Roxell
• [PATCH v7 15/63] usb: dwc3: import from kernel v4.11   Anders Roxell
• [PATCH v7 16/63] usb: dwc3: import from kernel v4.12   Anders Roxell
• [PATCH v7 17/63] usb: dwc3: import from kernel v4.13   Anders Roxell
• [PATCH v7 18/63] usb: dwc3: import from kernel v4.14   Anders Roxell
• [PATCH v7 19/63] usb: dwc3: import from kernel v4.15   Anders Roxell
• [PATCH v7 20/63] usb: dwc3: import from kernel v4.16   Anders Roxell
• [PATCH v7 21/63] usb: dwc3: import from kernel v4.17   Anders Roxell
• [PATCH v7 22/63] usb: dwc3: import from kernel v4.18   Anders Roxell
• [PATCH v7 23/63] usb: dwc3: import from kernel v4.19   Anders Roxell
• [PATCH v7 24/63] usb: dwc3: import from kernel v4.20   Anders Roxell
• [PATCH v7 25/63] usb: dwc3: import from kernel v5.0   Anders Roxell
• [PATCH v7 26/63] usb: dwc3: import from kernel v5.1   Anders Roxell
• [PATCH v7 27/63] usb: dwc3: import from kernel v5.2   Anders Roxell
• [PATCH v7 28/63] usb: dwc3: import from kernel v5.3   Anders Roxell
• [PATCH v7 29/63] usb: dwc3: import from kernel v5.4   Anders Roxell
• [PATCH v7 30/63] usb: dwc3: import from kernel v5.5   Anders Roxell
• [PATCH v7 31/63] usb: dwc3: import from kernel v5.6   Anders Roxell
• [PATCH v7 32/63] usb: dwc3: import from kernel v5.7   Anders Roxell
• [PATCH v7 33/63] usb: dwc3: import from kernel v5.8   Anders Roxell
• [PATCH v7 34/63] usb: dwc3: import from kernel v5.9   Anders Roxell
• [PATCH v7 35/63] usb: dwc3: import from kernel v5.10   Anders Roxell
• [PATCH v7 36/63] usb: dwc3: import from kernel v5.11   Anders Roxell
• [PATCH v7 37/63] usb: dwc3: import from kernel v5.12   Anders Roxell
• [PATCH v7 38/63] usb: dwc3: import from kernel v5.13   Anders Roxell
• [PATCH v7 39/63] usb: dwc3: import from kernel v5.14   Anders Roxell
• [PATCH v7 40/63] usb: dwc3: import from kernel v5.15   Anders Roxell
• [PATCH v7 41/63] usb: dwc3: import from kernel v5.16   Anders Roxell
• [PATCH v7 42/63] usb: dwc3: import from kernel v5.17   Anders Roxell
• [PATCH v7 43/63] usb: dwc3: import from kernel v5.18   Anders Roxell
• [PATCH v7 44/63] usb: dwc3: import from kernel v5.19   Anders Roxell
• [PATCH v7 45/63] usb: dwc3: import from kernel v6.0   Anders Roxell
• [PATCH v7 46/63] usb: dwc3: import from kernel v6.1   Anders Roxell
• [PATCH v7 47/63] usb: dwc3: import from kernel v6.2   Anders Roxell
• [PATCH v7 48/63] usb: dwc3: import from kernel v6.3   Anders Roxell
• [PATCH v7 49/63] usb: dwc3: import from kernel v6.4   Anders Roxell
• [PATCH v7 50/63] usb: dwc3: import from kernel v6.5   Anders Roxell
• [PATCH v7 51/63] usb: dwc3: import from kernel v6.6   Anders Roxell
• [PATCH v7 52/63] usb: dwc3: import from kernel v6.7   Anders Roxell
• [PATCH v7 53/63] usb: dwc3: import from kernel v6.8   Anders Roxell
• [PATCH v7 54/63] usb: dwc3: import from kernel v6.9   Anders Roxell
• [PATCH v7 55/63] usb: dwc3: import from kernel v6.10   Anders Roxell
• [PATCH v7 56/63] usb: dwc3: import from kernel v6.11   Anders Roxell
• [PATCH v7 57/63] usb: dwc3: import from kernel v6.12   Anders Roxell
• [PATCH v7 58/63] usb: dwc3: import from kernel v6.13   Anders Roxell
• [PATCH v7 59/63] usb: dwc3: import from kernel v6.14   Anders Roxell
• [PATCH v7 60/63] usb: dwc3: import from kernel v6.15   Anders Roxell
• [PATCH v7 61/63] usb: dwc3: import from kernel v6.16   Anders Roxell
• [PATCH v7 62/63] usb: gadget: re-import epautoconf.c from kernel v6.16   Anders Roxell
• [PATCH v7 63/63] usb: udc: re-import udc-core.c from kernel v6.16   Anders Roxell
• [PATCH v7 00/24] usb: dwc3: part 2, make the resynced code work   Anders Roxell
• [PATCH v7 01/24] dm: add helpers needed by the resynced DWC3 code   Anders Roxell
• [PATCH v7 02/24] usb: phy: add the usb_phy helpers needed by the resynced DWC3 code   Anders Roxell
• [PATCH v7 03/24] usb: gadget: adapt the gadget API after the resync   Anders Roxell
• [PATCH v7 04/24] usb: gadget: udc: make udc-core build in u-boot   Anders Roxell
• [PATCH v7 05/24] usb: dwc3: make the core driver build in u-boot   Anders Roxell
• [PATCH v7 06/24] usb: dwc3: bring back the samsung usb phy driver   Anders Roxell
• [PATCH v7 07/24] usb: dwc3: make gadget and ep0 build in u-boot   Anders Roxell
• [PATCH v7 08/24] usb: gadget: udc: enable async callbacks on bind   Anders Roxell
• [PATCH v7 09/24] usb: dwc3: ep0: flush and invalidate cache around ep0 transfers   Anders Roxell
• [PATCH v7 10/24] usb: dwc3: make the am62 glue build in u-boot   Anders Roxell
• [PATCH v7 11/24] usb: gadget: ci_udc: move to the udc-core registration   Anders Roxell
• [PATCH v7 12/24] usb: gadget: ci_udc: set endpoint capabilities   Anders Roxell
• [PATCH v7 13/24] usb: gadget: dwc2_udc_otg: fix up after the resync   Anders Roxell
• [PATCH v7 14/24] usb: gadget: fix up the function drivers after the resync   Anders Roxell
• [PATCH v7 15/24] usb: gadget: fix up the last UDC drivers after the resync   Anders Roxell
• [PATCH v7 16/24] usb: gadget: atmel_usba_udc: set endpoint capabilities   Anders Roxell
• [PATCH v7 17/24] usb: gadget: at91_udc: register with udc-core   Anders Roxell
• [PATCH v7 18/24] usb: gadget: at91_udc: set endpoint capabilities   Anders Roxell
• [PATCH v7 19/24] usb: musb-new: fix up after the resync   Anders Roxell
• [PATCH v7 20/24] usb: musb-new: set endpoint capabilities   Anders Roxell
• [PATCH v7 21/24] usb: mtu3: fix up after the resync   Anders Roxell
• [PATCH v7 22/24] usb: mtu3: set endpoint capabilities   Anders Roxell
• [PATCH v7 23/24] usb: host: xhci: fix up after the resync   Anders Roxell
• [PATCH v7 24/24] usb: cdns3: fix up after the resync   Anders Roxell
• [PATCH v7 00/24] usb: dwc3: part 2, make the resynced code work   Anders Roxell
• [PATCH v7 00/24] usb: dwc3: part 2, make the resynced code work   Anders Roxell
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Svyatoslav Ryhel
• [PATCH v2 2/7] MAINTAINERS: tegra: Update and correct entries   Svyatoslav Ryhel
• [PATCH v2 2/7] MAINTAINERS: tegra: Update and correct entries   Svyatoslav Ryhel
• [PATCH 0/3] fixes three OOB handling issues in the OMAP GPMC   Wagner Popov dos Santos
• [PATCH 1/3] mtd: nand: omap_gpmc: report available OOB bytes   Wagner Popov dos Santos
• [PATCH 2/3] mtd: nand: omap_gpmc: fix BCH16 OOB free length   Wagner Popov dos Santos
• [PATCH 3/3] mtd: nand: omap_gpmc: preserve OOB data during BCH reads   Wagner Popov dos Santos
• [PATCH] jffs2: initialize datacrc for inode/dirent entries built from scan   Wagner Popov dos Santos
• [v2,0/5] gpio: improve claim diagnostics and fix gpio-delay offset handling   Sanwal, Pranav
• [PATCH v3 0/6] gpio: improve claim diagnostics and fix gpio-delay offset handling   Pranav Sanwal
• [PATCH v3 1/6] gpio: uclass: log when a gpio offset is already claimed   Pranav Sanwal
• [PATCH v3 2/6] gpio: cmd: warn when a gpio offset is already claimed   Pranav Sanwal
• [PATCH v3 3/6] gpio: delay: set gpio_count and validate index against it   Pranav Sanwal
• [PATCH v3 4/6] gpio: delay: fix offset propagation in gpio_delay_xlate()   Pranav Sanwal
• [PATCH v3 5/6] gpio: delay: free wrapped real GPIOs on remove   Pranav Sanwal
• [PATCH v3 6/6] gpio: delay: free already-requested GPIOs on probe failure   Pranav Sanwal
• [PATCH 0/5] Add AMD Versal CPM/QDMA PCIe support   Pranav Sanwal
• [PATCH 1/5] pci: Add pci_generic_mmap_write_config32() helper   Pranav Sanwal
• [PATCH 2/5] pci: Add support for AMD QDMA PL PCIe root port   Pranav Sanwal
• [PATCH 3/5] pci: Add support for CPM4 and CPM5 PCIe controllers   Pranav Sanwal
• [PATCH 4/5] arm64: versal: Add MMU mappings for CPM5 ECAM config space   Pranav Sanwal
• [PATCH 5/5] arm64: versal: Enable PCIe/NVMe support and add NVMe boot target   Pranav Sanwal
• [PATCH] configs: versal: Add amd_versal_premium_2 config fragment   Pranav Sanwal
• [PATCH 0/2] pci: versal: Enable AMD DW PCIe controller for Versal Premium Gen 2   Pranav Sanwal
• [PATCH 1/2] pci: Enable AMD DW PCIe (MDB) controller support on Versal Premium Gen 2   Pranav Sanwal
• [PATCH 2/2] configs: versal: Enable AMD DW PCIe controller for Versal Premium Gen 2   Pranav Sanwal
• Bogus error messages on Apple Silicon   Randolph Sapp
• [PATCH v2 1/3] lmb: Return -EFAULT when requested region is not part of memory map   Randolph Sapp
• [PATCH v2 2/3] lmb: Return -EFAULT when freeing unallocated memory regions   Randolph Sapp
• [PATCH v2 3/3] boot: image-fdt: Restore suppression of irrelevant ERROR message   Randolph Sapp
• [PATCH 1/3] bootm: size the noload decompression buffer from the compressor header   Nora Schiffer
• [PATCH] clk: clk-uclass: Ignore -ENOSYS in clk_set_default_rates()   Markus Schneider-Pargmann
• [PATCH] toradex: apalis-imx8: select QP/QM device tree from OTP fuse   Franz Schnyder
• [PATCH 0/8] toradex: Decouple from Toradex product ID table   Franz Schnyder
• [PATCH 1/8] toradex: verdin-am62: Set WiFI DTB as default for new PIDs   Franz Schnyder
• [PATCH 2/8] toradex: verdin-am62p: Set WiFi DTB as default for new PIDs   Franz Schnyder
• [PATCH 3/8] toradex: verdin-imx95: Set WiFi DTB as default for new PIDs   Franz Schnyder
• [PATCH 4/8] toradex: verdin-imx8mp: Set WiFi DTB as default for new PIDs   Franz Schnyder
• [PATCH 5/8] toradex: verdin-imx8mm: Set WiFi DTB as default for new PIDs   Franz Schnyder
• [PATCH 6/8] toradex: common: Decouple board sysinfo from the product ID table   Franz Schnyder
• [PATCH 7/8] toradex: tdx-cfg-block: Remove validation against PID table   Franz Schnyder
• [PATCH 8/8] toradex: tdx-cfg-block: Remove product ID limitation   Franz Schnyder
• [PATCH 1/2] i2c: k1: fix wrong bus speed setting   Heiko Schocher
• [PATCH v2 3/4] i2c: k1: enable both functional and bus clocks   Heiko Schocher
• [PATCH] disk: ubi: use a format string when copying the volume name   Heiko Schocher
• [PATCH v2 0/4] i2c/clk: spacemit: k1: fix I2C bus configuration and clock handling   Heiko Schocher
• [PATCH v2 0/4] i2c/clk: spacemit: k1: fix I2C bus configuration and clock handling   Heiko Schocher
• Please pull u-boot-i2c   Heiko Schocher
• Please pull u-boot-i2c   Heiko Schocher
• [PATCH 1/3] ARM: imx: Support detection of ECSPI recovery mode on i.MX6   Frieder Schrempf
• [PATCH 2/3] board: imx6dl-sielaff: Remove board_boot_order() workaround   Frieder Schrempf
• [PATCH 3/3] board: imx6dl-sielaff: Enable environment on SD card   Frieder Schrempf
• [PATCH 1/4] ddr: imx: Reload the training firmware for every PHY configuration   Frieder Schrempf
• [PATCH 2/4] ddr: imx: Move error message for failed training to calling side   Frieder Schrempf
• [PATCH 3/4] ddr: imx: Allow to call ddr init without logging failure   Frieder Schrempf
• [PATCH 4/4] imx: kontron-sl-mx8mm: Stop printing error message on first DDR init   Frieder Schrempf
• [PATCH v2 1/4] ddr: imx: Reload the training firmware for every PHY configuration   Frieder Schrempf
• [PATCH v2 2/4] ddr: imx: Move error message for failed training to calling side   Frieder Schrempf
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Frieder Schrempf
• [PATCH v2 4/4] imx: kontron-sl-mx8mm: Stop printing error message on first DDR init   Frieder Schrempf
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Frieder Schrempf
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Frieder Schrempf
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Frieder Schrempf
• [PATCH v3] ddr: imx: Reload the training firmware for every PHY configuration   Frieder Schrempf
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Frieder Schrempf
• [PATCH v4 00/11] arm: mach-k3: introduce basic support for the AM62L   Frieder Schrempf
• [PATCH v1 05/12] mtd: spi-nand: add EN75 BMT bad-block management support   Frieder Schrempf
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Frieder Schrempf
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Frieder Schrempf
• [PATCH 1/1] efi: avoid video ghosting in EFI app   Heinrich Schuchardt
• Re: [PATCH 1/4] efi_loader: firmware: track last attempt status for ESRT reporting   Heinrich Schuchardt
• Re: [PATCH 2/4] efi_loader: firmware: add last attempt tracking for RAW capsules   Heinrich Schuchardt
• Re: [PATCH 4/4] efidebug: capsule: add a command to list updatable firmware images   Heinrich Schuchardt
• [PATCH 1/2] usb: gadget: f_mass_storage: Remove useless rc variable   Heinrich Schuchardt
• Trying to get MTD_BLOCK to actually work   Heinrich Schuchardt
• [security] Report of possible heap overflow in U-Boot EFI TCG2 boot loader (ANT-2026-CBSBSFG8)   Heinrich Schuchardt
• [security] Report of possible heap buffer overflow in U-Boot EFI image verification under Secure Boot (ANT-2026-R09Q9YM0)   Heinrich Schuchardt
• [PATCH 1/1] mtd: QEMU uses 32-bit port width for ARM and RISC-V   Heinrich Schuchardt
• [PATCH 1/1] tools: build mkeficapsule for CONFIG_EFI_HAVE_CAPSULE_SUPPORT=y   Heinrich Schuchardt
• Coverity 652910 Uninitialized pointer read   Heinrich Schuchardt
• [PATCH 0/2] efi_loader: fix GetRng() implementation   Heinrich Schuchardt
• [PATCH 1/2] efi_loader: in platform_get_rng_device() use EFI_PRINT()   Heinrich Schuchardt
• [PATCH 2/2] efi_loader: consider type of platform_get_rng_device() return value   Heinrich Schuchardt
• [PATCH 1/1] disk: drop Amiga partition table support   Heinrich Schuchardt
• [PATCH v2] disk: update partition type reporting   Heinrich Schuchardt
• [PATCH v2 1/1] efi: avoid video ghosting in EFI app   Heinrich Schuchardt
• [PATCH 1/6] disk: part_efi: Size the partition entry array from the block size   Heinrich Schuchardt
• [PATCH 2/6] disk: part_efi: Add missing endianness conversions   Heinrich Schuchardt
• [PATCH 3/6] disk: part_mac: Fix stack corruption on devices with large blocks   Heinrich Schuchardt
• [PATCH 4/6] test: dm: part: Check the GPT layout for large sector sizes   Heinrich Schuchardt
• [PATCH 1/1] cmd/host: allow to retrieve sequence number for label   Heinrich Schuchardt
• [PATCH 5/6] test: py: gpt: Bind the disk image in test_gpt_write_part_type()   Heinrich Schuchardt
• [PATCH 6/6] test: py: gpt: Test the GPT layout on a device with 4096-byte blocks   Heinrich Schuchardt
• [PATCH next 09/45] doc: arch/x86: update link to ACPI   Heinrich Schuchardt
• [PATCH next 11/45] doc: develop: uefi: update link to ipxe git repo   Heinrich Schuchardt
• [PATCH next 15/45] doc: develop: sending_patches: update link to GPL license   Heinrich Schuchardt
• [PATCH v1 2/2] test: boot: Check that efi_mgr boot failures are reported   Heinrich Schuchardt
• [PATCH 1/1] cmd/efidebug: do not allow invalid boot order   Heinrich Schuchardt
• [PATCH] disk: part_mac: Remove the Apple Partition Map driver   Heinrich Schuchardt
• [PATCH 3/6] disk: part_mac: Fix stack corruption on devices with large blocks   Heinrich Schuchardt
• [PATCH next 00/45] doc: fix some issues reported by linkcheck   Heinrich Schuchardt
• [PATCH] clk: clk-uclass: Ignore -ENOSYS in clk_set_default_rates()   Heinrich Schuchardt
• [PATCH] mmc: omap_hsmmc: Add "ti,am437-sdhci" compatible   Heinrich Schuchardt
• [PATCH] test: lib/uuid: Fix endianness for dynamic GUIDs   Heinrich Schuchardt
• [PATCH] test: lib/uuid: Fix endianness for dynamic GUIDs   Heinrich Schuchardt
• [PATCH next 19/45] doc: develop/coccinelle: update links   Heinrich Schuchardt
• Pull request efi-2026-10-rc4   Heinrich Schuchardt
• [PATCH 1/1] lib: rsa: reject oversized public exponent in rsa_gen_key_prop()   Heinrich Schuchardt
• [PATCH 1/2] efi_loader: in platform_get_rng_device() use EFI_PRINT()   Heinrich Schuchardt
• [PATCH v2 0/2] efi_loader: consider type of platform_get_rng_device() return value   Heinrich Schuchardt
• [PATCH v2 1/2] efi_loader: remove debug in platform_get_rng_device   Heinrich Schuchardt
• [PATCH v2 2/2] efi_loader: consider type of platform_get_rng_device() return value   Heinrich Schuchardt
• [PATCH 1/7] rockchip: mkimage: Split size_and_off and size_and_nimage   Quentin Schulz
• [PATCH 2/7] rockchip: mkimage: Print image information for all embedded images   Quentin Schulz
• [PATCH 3/7] rockchip: mkimage: Print boot0 and boot1 parameters   Quentin Schulz
• [PATCH 4/7] rockchip: mkimage: Add option to change image offset alignment   Quentin Schulz
• [PATCH 1/7] rockchip: mkimage: Split size_and_off and size_and_nimage   Quentin Schulz
• [PATCH v1] rockchip: spl: replace ifdef by IS_ENABLED for timer_init() call condition   Quentin Schulz
• [PATCH v2 1/2] include: linux: Import hw_bitfield.h from Linux v6.18   Quentin Schulz
• [PATCH v2 1/2] include: linux: Import hw_bitfield.h from Linux v6.18   Quentin Schulz
• [PATCH v2 3/5] clk: rockchip: pll: fix RK3588 frac PLL result for k=-32768   Quentin Schulz
• [PATCH v2 4/5] clk: rockchip: pll: let rockchip_rk3588_pll_k_get update m directly   Quentin Schulz
• [PATCH v2 0/5] clk: rockchip: pll: fixes and simplification of maths in RK3588 frac PLL   Quentin Schulz
• [PATCH 01/15] clk: rockchip: pll: Fix double use of postdiv1   Quentin Schulz
• [PATCH 01/15] clk: rockchip: pll: Fix double use of postdiv1   Quentin Schulz
• [PATCH 02/15] clk: rockchip: pll: Always write the dsmpd flag   Quentin Schulz
• [PATCH 03/15] clk: rockchip: pll: Always write the k param   Quentin Schulz
• [PATCH 04/15] clk: rockchip: pll: Use PLL_FIXED_MODE flag on rk3588/rk3576 plls   Quentin Schulz
• [PATCH 05/15] clk: rockchip: pll: Limit special rk3588_pll handling to RK3588   Quentin Schulz
• [PATCH 06/15] clk: rockchip: rk3568: Fix trivial clock configuration errors   Quentin Schulz
• [PATCH 07/15] clk: rockchip: rk3588: Fix trivial clock configuration errors   Quentin Schulz
• [PATCH 08/15] clk: rockchip: rk3588: Fix possible divide by zero   Quentin Schulz
• [PATCH 09/15] clk: rockchip: rk3588: Fix ACLK_BUS_ROOT rate set during probe   Quentin Schulz
• [PATCH 10/15] clk: rockchip: rk3588: Use SPLL_HZ constant   Quentin Schulz
• [PATCH 11/15] clk: rockchip: rk3576: Fix trivial clock configuration errors   Quentin Schulz
• [PATCH 12/15] clk: rockchip: rk3528: Fix trivial clock configuration errors   Quentin Schulz
• [PATCH 13/15] clk: rockchip: rk3506: Fix trivial clock configuration errors   Quentin Schulz
• [PATCH 14/15] clk: rockchip: rk3568: Drop unused GRF syscon lookup   Quentin Schulz
• [PATCH 15/15] clk: rockchip: rk3588: Drop unused GRF syscon lookup   Quentin Schulz
• [PATCH 01/15] clk: rockchip: pll: Fix double use of postdiv1   Quentin Schulz
• [PATCH 1/6] rockchip: rk3506: Imply OF_UPSTREAM   Quentin Schulz
• [PATCH v2 3/4] pinctrl: mediatek: simplify Kconfig   Quentin Schulz
• [PATCH] rockchip: rk3576-rock-4d: Enable XMC SPI chip   Quentin Schulz
• [RFC] disk/part: partition number parsed as hex in blk_get_device_part_str   Quentin Schulz
• [RESEND PATCH V2] CI: add Qualcomm requirements.txt for world build   Quentin Schulz
• [RFC] disk/part: partition number parsed as hex in blk_get_device_part_str   Quentin Schulz
• [PATCH 0/7] rockchip: Enable USB support for RK3528   Quentin Schulz
• [PATCH RFC v3 0/2] Modern pinctrl for Exynos5250 devices   Quentin Schulz
• [PATCH v4 3/4] rockchip: rk3399: Add ROC-PC-PLUS board detection   Quentin Schulz
• [PATCH v4 3/4] rockchip: rk3399: Add ROC-PC-PLUS board detection   Quentin Schulz
• [PATCH v2] rockchip: rk3576-rock-4d: Enable XMC SPI chip   Quentin Schulz
• [PATCH 2/6] rockchip: rk3506: Update ENV_MEM_LAYOUT_SETTINGS   Quentin Schulz
• [PATCH 3/6] adc: rockchip-saradc: Add driver data for RK3506   Quentin Schulz
• [PATCH 4/6] clk: rockchip: rk3506: Fix CLK_SARADC set rate issues   Quentin Schulz
• [PATCH 5/6] clk: rockchip: rk3506: Use FIELD_PREP_WM16 macro   Quentin Schulz
• [PATCH 4/6] clk: rockchip: rk3506: Fix CLK_SARADC set rate issues   Quentin Schulz
• [PATCH 6/6] rockchip: rk3506: Use FIELD_PREP_WM16 macro   Quentin Schulz
• [PATCH v5 2/9] rockchip: doc: add mask ROM mode text   Quentin Schulz
• [PATCH v5 3/9] rockchip: doc: remove TODO   Quentin Schulz
• [PATCH v5 4/9] rockchip: doc: add more building instructions   Quentin Schulz
• [PATCH v5 7/9] rockchip: tools: add comment section to rkimage.c   Quentin Schulz
• [PATCH v5 9/9] rockchip: doc: remove README.rockchip   Quentin Schulz
• [PATCH v5 4/9] rockchip: doc: add more building instructions   Quentin Schulz
• [BUG] rockchip: v2026.07 fails to boot on GameForce Ace (RK3588S)   Quentin Schulz
• [PATCH 3/6] adc: rockchip-saradc: Add driver data for RK3506   Quentin Schulz
• [PATCH v4 3/4] rockchip: rk3399: Add ROC-PC-PLUS board detection   Quentin Schulz
• [PATCH 3/6] adc: rockchip-saradc: Add driver data for RK3506   Quentin Schulz
• [PATCH v5 3/4] rockchip: rk3399: Add ROC-PC-PLUS board detection   Quentin Schulz
• [PATCH v2 0/2] rockchip: rk3576: Disable force_jtag by default   Quentin Schulz
• [GIT PULL] Please pull u-boot-rockchip-2026.10-20260813 into main   Quentin Schulz
• [PATCH 2/2] test: dm: nfs: add a regression test for an oversized NFS read length   Quentin Schulz
• [PATCH] arm: dts: rockchip: Drop OTP nodes from u-boot.dtsi on RK3528/RK356x   Quentin Schulz
• [PATCH 0/7] rockchip: Enable USB support for RK3528   Quentin Schulz
• [PATCH v2] rockchip: rk3576-rock-4d: Enable XMC SPI chip   Quentin Schulz
• [PATCH v2 0/5] clk: rockchip: pll: fixes and simplification of maths in RK3588 frac PLL   Quentin Schulz
• [GIT PULL] Please pull u-boot-rockchip-2027.01-20260813 into next   Quentin Schulz
• [GIT PULL] Please pull u-boot-rockchip-2027.01-20260813 into next   Quentin Schulz
• [PATCH v7 2/6] rockchip: doc: add mask ROM mode text   Quentin Schulz
• [PATCH v7 5/6] rockchip: doc: add back to ROM section   Quentin Schulz
• [PATCH v7 6/6] rockchip: doc: add notes section   Quentin Schulz
• [PATCH v7 5/6] rockchip: doc: add back to ROM section   Quentin Schulz
• [PATCH] spi: rockchip: skip the unused FIFO direction on a one-wire device   Quentin Schulz
• [PATCH] spi: Handle spi-{tx,rx}-bus-width 0 as SPI_NO_TX/SPI_NO_RX   Quentin Schulz
• [PATCH v3] arm: rockchip: spl: Add hotkey detection support.   Quentin Schulz
• [PATCH v2 1/2] spi: Handle spi-{tx,rx}-bus-width 0 as SPI_NO_TX/SPI_NO_RX   Quentin Schulz
• [PATCH v2 2/2] spi: rockchip: skip the unused FIFO direction on a one-wire device   Quentin Schulz
• [PATCH v2 2/2] spi: rockchip: skip the unused FIFO direction on a one-wire device   Quentin Schulz
• [PATCH v4 2/2] spi: rockchip: skip the unused FIFO direction on a one-wire device   Quentin Schulz
• [PATCH v3 0/6] watchdog: report effective timeout   Quentin Schulz
• VisionFive 2 eMMC boot issues.   Quentin Schulz
• [PATCH v3] fdt: Fix phandles not copying when using templates   Quentin Schulz
• [PATCH] pci: pcie_dw_rockchip: add PCIe reset configuration delay   Quentin Schulz
• [PATCH v2] lib: zstd: update to latest Linux zstd 1.5.7   Quentin Schulz
• VisionFive 2 eMMC boot issues.   Quentin Schulz
• [PATCH 1/2] MAINTAINERS: Use proper Orphan status marking   Quentin Schulz
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Quentin Schulz
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Quentin Schulz
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Quentin Schulz
• [PATCH 1/2] fdt_support: Add /chosen/bootsource fixup   Quentin Schulz
• [PATCH v2] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Quentin Schulz
• [PATCH 2/6] rockchip: rk3506: Update ENV_MEM_LAYOUT_SETTINGS   Quentin Schulz
• [PATCH 5/6] clk: rockchip: rk3506: Use FIELD_PREP_WM16 macro   Quentin Schulz
• [PATCH next 00/45] doc: fix some issues reported by linkcheck   Quentin Schulz
• [PATCH next 01/45] doc: arch/mips: update link for Buildroot toolchain   Quentin Schulz
• [PATCH next 02/45] doc: arch/x86: fix "link" to IRQ router DT binding   Quentin Schulz
• [PATCH next 03/45] doc: develop: sending_patches: fix links to pw-am.sh   Quentin Schulz
• [PATCH next 04/45] doc: arch/x86: fix URL to em100   Quentin Schulz
• [PATCH next 05/45] doc: arch/x86: update link to DediProg SO8 Testclip   Quentin Schulz
• [PATCH next 06/45] doc: arch/x86: update SFI link   Quentin Schulz
• [PATCH next 07/45] doc: arch/x86: update MP link   Quentin Schulz
• [PATCH next 08/45] doc: arch/x86: update link to SeaBIOS   Quentin Schulz
• [PATCH next 09/45] doc: arch/x86: update link to ACPI   Quentin Schulz
• [PATCH next 10/45] doc: arch/x86: manual_boot: update links to slides   Quentin Schulz
• [PATCH next 11/45] doc: develop: uefi: update link to ipxe git repo   Quentin Schulz
• [PATCH next 12/45] doc: board/amlogic: jethub-j100: update product page   Quentin Schulz
• [PATCH next 13/45] doc: board/amlogic: jethub-j80: use redirect link directly   Quentin Schulz
• [PATCH next 14/45] doc: develop: sending_patches: update link to Email Clients and Patches   Quentin Schulz
• [PATCH next 15/45] doc: develop: sending_patches: update link to GPL license   Quentin Schulz
• [PATCH next 16/45] doc: usage/pxe: use redirect link   Quentin Schulz
• [PATCH next 17/45] doc: board/google: chromebook_link: update link to blobs   Quentin Schulz
• [PATCH next 18/45] doc: arch/sh: remove squatted URL   Quentin Schulz
• [PATCH next 19/45] doc: develop/coccinelle: update links   Quentin Schulz
• [PATCH next 20/45] doc: develop/coccinelle: remove dead link in supplemental documentation   Quentin Schulz
• [PATCH next 21/45] doc: board/nxp: mx6ullevk: replace broken link   Quentin Schulz
• [PATCH next 00/45] doc: fix some issues reported by linkcheck   Quentin Schulz
• [PATCH v2] rockchip: px30: Fix TPL_STACK overflow into BootROM reserved region   Quentin Schulz
• [PATCH v3] fdt: Fix phandles not copying when using templates   Quentin Schulz
• [PATCH 22/45] doc: arch/arc: update link   Quentin Schulz
• [PATCH 23/45] doc: develop/uefi: stop tripping linkcheck   Quentin Schulz
• [PATCH 24/45] doc: board/allwinner: update link to MTD utils   Quentin Schulz
• [PATCH 25/45] doc: chromium: update link to Developer Mode   Quentin Schulz
• [PATCH 26/45] doc: chromium: update Firmware porting guide link   Quentin Schulz
• [PATCH 27/45] doc: chromium: update links to slides   Quentin Schulz
• [PATCH 28/45] doc: develop/driver-model: fs_firmware_loader: update link   Quentin Schulz
• [PATCH 29/45] doc: board/tbs: update link to TRM   Quentin Schulz
• [PATCH 30/45] doc: bootstd: update link to BSL   Quentin Schulz
• [PATCH 31/45] doc: learn/talks: remove dead links to slides   Quentin Schulz
• [PATCH 32/45] doc: build/gen_compile_commands: update link to point to the right page   Quentin Schulz
• [PATCH 33/45] doc: board/highbank: update links to cxmanage and ipmitool tools   Quentin Schulz
• [PATCH 34/45] doc: board/siemens: iot2050: update links to files on GitHub   Quentin Schulz
• [PATCH 35/45] doc: develop/tests_writing: update links to new GitLab   Quentin Schulz
• [PATCH 36/45] doc: board/renesas: update clone instructions to use new GitLab   Quentin Schulz
• [PATCH 37/45] doc: fix broken links to mailing lists   Quentin Schulz
• [PATCH 38/45] doc: index: update link to mailing list info   Quentin Schulz
• [PATCH 39/45] doc: develop/bootstd: fix link to distro_boot   Quentin Schulz
• [PATCH 40/45] doc: develop/sending_patches: remove mention to the test mailing list   Quentin Schulz
• [PATCH 41/45] doc: chromium/chainload: update instructions on booting on Snow   Quentin Schulz
• [PATCH 42/45] doc: develop/sending_patches: use link from ozlabs.org mailman archive   Quentin Schulz
• [PATCH 43/45] doc: switch to HTTPS for a few links   Quentin Schulz
• [PATCH next 00/45] doc: fix some issues reported by linkcheck   Quentin Schulz
• [PATCH v4] Add support for OpenSSL Provider API   Quentin Schulz
• [PATCH next 44/45] binman: btool: bootgen: update link to user guide   Quentin Schulz
• [PATCH next 45/45] binman: gbb: update link   Quentin Schulz
• [PATCH v6 1/4] mtd: spi-nor-ids: Add XMC XM25QH128C   Quentin Schulz
• [PATCH v4 0/2] spi: support devices with no wire in one direction   Quentin Schulz
• [GIT PULL] Please pull u-boot-rockchip-2027.01-20260828 into next   Quentin Schulz
• [PATCH] pinctrl: airoha: sync with linux-7.3 driver   Daniel Schwierzeck
• [PATCH 1/7] qcom: capsule: add FIT capsule support with multi-partition   Balaji Selvanathan
• [PATCH 0/8] mkeficapsule: Support multi-payload capsules   Balaji Selvanathan
• [PATCH v5 0/8] (no cover subject)   Balaji Selvanathan
• [PATCH v5 1/8] arm: snapdragon: Make SYSRESET_PSCI optional   Balaji Selvanathan
• [PATCH v5 2/8] arm: snapdragon: Guard PSCI functions with CONFIG_ARM_SMCCC   Balaji Selvanathan
• [PATCH v5 3/8] arm: snapdragon: Disable MMU early before U-Boot reset vector   Balaji Selvanathan
• [PATCH v5 4/8] arm: snapdragon: Add CONFIG_QCOM_SNAGBOOT_MODE option   Balaji Selvanathan
• [PATCH v5 5/8] soc: qcom: cmd-db: Allow boot without CMD DB data   Balaji Selvanathan
• [PATCH v5 6/8] arch: arm: dts: remove Lemans EVK override DTS   Balaji Selvanathan
• [PATCH v5 7/8] configs: add qcom_lemans_snagboot_defconfig for Lemans-EVK   Balaji Selvanathan
• [PATCH v5 8/8] doc: qualcomm: Add snagboot mode documentation   Balaji Selvanathan
• [PATCH v6 0/8] arm: snapdragon: Add snagboot support for Lemans-EVK   Balaji Selvanathan
• [PATCH v6 1/8] arm: snapdragon: Make SYSRESET_PSCI optional   Balaji Selvanathan
• [PATCH v6 2/8] arm: snapdragon: Guard PSCI functions with CONFIG_ARM_SMCCC   Balaji Selvanathan
• [PATCH v6 3/8] arm: snapdragon: Disable MMU early before U-Boot reset vector   Balaji Selvanathan
• [PATCH v6 4/8] arm: snapdragon: Add CONFIG_QCOM_SNAGBOOT_MODE option   Balaji Selvanathan
• [PATCH v6 5/8] soc: qcom: cmd-db: Allow boot without CMD DB data   Balaji Selvanathan
• [PATCH v6 6/8] arch: arm: dts: remove Lemans EVK override DTS   Balaji Selvanathan
• [PATCH v6 7/8] configs: add qcom_lemans_snagboot_defconfig for Lemans-EVK   Balaji Selvanathan
• [PATCH v6 8/8] doc: qualcomm: Add snagboot mode documentation   Balaji Selvanathan
• [PATCH v2 1/4] clk: qcom: Add driver for SC7180 GCC   Balaji Selvanathan
• [PATCH 0/7] qcom: qcs8300/monaco-evk: pinctrl, interconnect, RPMH clock and reboot-mode support   Balaji Selvanathan
• [PATCH 1/7] clk: qcom: Add dedicated sa8775p RPMH clock driver   Balaji Selvanathan
• [PATCH 2/7] clk: qcom: qcs8300: Extend GCC clock driver to full gate/RCG coverage   Balaji Selvanathan
• [PATCH 3/7] pinctrl: qcom: Add QCS8300 pinctrl driver   Balaji Selvanathan
• [PATCH 4/7] interconnect: qcom: Add QCS8300 interconnect driver   Balaji Selvanathan
• [PATCH 5/7] arm64: dts: monaco-evk: Add reboot-mode support via PON/SDAM   Balaji Selvanathan
• [PATCH 6/7] arm64: dts: monaco-evk: Force vreg_l8a always-on to protect UFS VCC   Balaji Selvanathan
• [PATCH 7/7] configs: qcom_qcs8300: Switch to monaco-evk DT and enable new drivers   Balaji Selvanathan
• [PATCH] boot: image-fdt: suppress spurious error on expected reservation failures   Balaji Selvanathan
• [PATCH] boot: image-fdt: suppress spurious error on expected reservation failures   Balaji Selvanathan
• [PATCH 0/8] reset: dispatch DT-declared reset modes via the reboot-mode framework   Balaji Selvanathan
• [PATCH 1/8] reboot-mode: parse up to 3 magic cells per mode   Balaji Selvanathan
• [PATCH 2/8] reboot-mode: add trigger op and request/list helpers   Balaji Selvanathan
• [PATCH 3/8] reboot-mode: add PSCI reboot-mode driver   Balaji Selvanathan
• [PATCH 4/8] cmd: reset: dispatch named reset modes via the reboot-mode framework   Balaji Selvanathan
• [PATCH 5/8] arm64: dts: qcom: add psci reboot-mode edl node for lemans/qcs6490-rb3gen2   Balaji Selvanathan
• [PATCH 6/8] configs: qcom: enable PSCI reboot-mode framework   Balaji Selvanathan
• [PATCH 7/8] test: dm: reboot-mode: test trigger dispatch and mode enumeration   Balaji Selvanathan
• [PATCH 8/8] doc: usage: reset: document device-tree-driven reset modes   Balaji Selvanathan
• [PATCH 0/6] drivers: sysreset: revert support for args   Balaji Selvanathan
• [PATCH v2 0/7] qcom: qcs8300/monaco-evk: pinctrl, interconnect, RPMH clock and reboot-mode support   Balaji Selvanathan
• [PATCH v2 1/7] clk: qcom: Add shared RPMH clock driver for SM8550/SM8650/SA8775P   Balaji Selvanathan
• [PATCH v2 2/7] clk: qcom: qcs8300: Extend GCC clock driver to full gate/RCG coverage   Balaji Selvanathan
• [PATCH v2 3/7] pinctrl: qcom: Add QCS8300 pinctrl driver   Balaji Selvanathan
• [PATCH v2 4/7] interconnect: qcom: Add QCS8300 interconnect driver   Balaji Selvanathan
• [PATCH v2 5/7] arm64: dts: monaco-evk: Add reboot-mode support via PON/SDAM   Balaji Selvanathan
• [PATCH v2 6/7] arm64: dts: monaco-evk: Force vreg_l8a always-on to protect UFS VCC   Balaji Selvanathan
• [PATCH v2 7/7] configs: qcom_qcs8300: Switch to monaco-evk DT and enable new drivers   Balaji Selvanathan
• [PATCH 0/4] efi_loader: track capsule last attempt status for ESRT, add efidebug capsule images   Balaji Selvanathan
• [PATCH 1/4] efi_loader: firmware: track last attempt status for ESRT reporting   Balaji Selvanathan
• [PATCH 2/4] efi_loader: firmware: add last attempt tracking for RAW capsules   Balaji Selvanathan
• [PATCH 3/4] efi_loader: Extract FW version even on authentication failure   Balaji Selvanathan
• [PATCH 4/4] efidebug: capsule: add a command to list updatable firmware images   Balaji Selvanathan
• [PATCH 0/2] efi_loader: firmware: decouple dfu_alt_num from image_index   Balaji Selvanathan
• [PATCH 1/2] efi_loader: firmware: decouple dfu_alt_num from image_index   Balaji Selvanathan
• [PATCH 2/2] test: efi_capsule: add sandbox coverage for dfu_alt_num override   Balaji Selvanathan
• [PATCH 0/2] qcom: capsule: build fw_images[] dynamically from the partition table   Balaji Selvanathan
• [PATCH 1/2] qcom: capsule: build fw_images[] dynamically from the partition table   Balaji Selvanathan
• [PATCH 2/2] configs: qcom: ignore OsIndications for capsule-on-disk   Balaji Selvanathan
• [PATCH 1/7] qcom: capsule: add FIT capsule support with multi-partition   Balaji Selvanathan
• [PATCH] clk: qcom: sc7280: add SDCC2 apps clock support   Balaji Selvanathan
• [PATCH v2 0/3] clk: qcom: use GATE_CLK_POLLED for CBCR-backed gate clocks   Balaji Selvanathan
• [PATCH v2 1/3] clk: qcom: sa8775p: use GATE_CLK_POLLED for CBCR-backed gate clocks   Balaji Selvanathan
• [PATCH v2 2/3] clk: qcom: sc7280: use GATE_CLK_POLLED for CBCR-backed gate clocks   Balaji Selvanathan
• [PATCH v2 3/3] clk: qcom: qcs615: use GATE_CLK_POLLED for CBCR-backed gate clocks   Balaji Selvanathan
• [PATCH] clk: qcom: sc7280: enable shared RPMH clock driver   Balaji Selvanathan
• [PATCH] interconnect: qcom: add SC7280 interconnect driver   Balaji Selvanathan
• [PATCH] misc: qcom_geni: fix RX_RFR_WATERMARK to use RX FIFO depth, not width   Balaji Selvanathan
• [PATCH v2] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Balaji Selvanathan
• [PATCH 0/2] qcom: capsule: build fw_images[] dynamically from the partition table   Balaji Selvanathan
• [PATCH 0/2] efi_loader: firmware: decouple dfu_alt_num from image_index   Balaji Selvanathan
• [PATCH v3] spi: Add Qualcomm GENI QUPv3 SPI controller driver   Balaji Selvanathan
• [PATCH v1 00/12] mips: add EcoNet/Airoha EN75xx (EN7512/EN7528) SoC support   AK Sharma
• [PATCH v1 01/12] mips: en75xx: add EcoNet/Airoha EN75xx SoC support   AK Sharma
• [PATCH v1 02/12] mips: en75xx: add TPL and SPL early boot stages   AK Sharma
• [PATCH v1 03/12] serial: en75xx: add EcoNet/Airoha EN75xx UART driver   AK Sharma
• [PATCH v1 04/12] spi: airoha-snfi: add EN7528 SPI-NAND controller support   AK Sharma
• [PATCH v1 05/12] mtd: spi-nand: add EN75 BMT bad-block management support   AK Sharma
• [PATCH v1 06/12] net: airoha-eth: add EN7528 Ethernet support   AK Sharma
• [PATCH v1 07/12] mtd: env, cmd: add EN75 NAND remap handling   AK Sharma
• [PATCH v1 08/12] boot: image: add weak hooks for the decompression buffer and flush   AK Sharma
• [PATCH v1 09/12] mips: dts: add EcoNet EN75xx device trees   AK Sharma
• [PATCH v1 10/12] board: econet: add EN7512 reference board   AK Sharma
• [PATCH v1 11/12] board: econet: add EN7528 board support   AK Sharma
• [PATCH v1 12/12] doc: board: econet: add EN75xx documentation   AK Sharma
• [PATCH v1 00/12] mips: add EcoNet/Airoha EN75xx (EN7512/EN7528) SoC support   AK Sharma
• [PATCH v1 01/12] mips: en75xx: add EcoNet/Airoha EN75xx SoC support   AK Sharma
• [PATCH v1 02/12] mips: en75xx: add TPL and SPL early boot stages   AK Sharma
• [PATCH v1 03/12] serial: en75xx: add EcoNet/Airoha EN75xx UART driver   AK Sharma
• [PATCH v1 04/12] spi: airoha-snfi: add EN7528 SPI-NAND controller support   AK Sharma
• [PATCH v1 05/12] mtd: spi-nand: add EN75 BMT bad-block management support   AK Sharma
• [PATCH v1 06/12] net: airoha-eth: add EN7528 Ethernet support   AK Sharma
• [PATCH v1 07/12] mtd: env, cmd: add EN75 NAND remap handling   AK Sharma
• [PATCH v1 08/12] boot: image: add weak hooks for the decompression buffer and flush   AK Sharma
• [PATCH v1 09/12] mips: dts: add EcoNet EN75xx device trees   AK Sharma
• [PATCH v1 10/12] board: econet: add EN7512 reference board   AK Sharma
• [PATCH v1 11/12] board: econet: add EN7528 board support   AK Sharma
• [PATCH v1 12/12] doc: board: econet: add EN75xx documentation   AK Sharma
• [PATCH v2 0/9] mips: add EcoNet/Airoha EN75xx (EN7512/EN7528) SoC support   AK Sharma
• [PATCH v2 1/9] mips: en75xx: add EcoNet/Airoha EN75xx SoC support   AK Sharma
• [PATCH v2 2/9] mips: en75xx: add TPL and SPL early boot stages   AK Sharma
• [PATCH v2 3/9] serial: en75xx: add EcoNet/Airoha EN75xx UART driver   AK Sharma
• [PATCH v2 4/9] spi: airoha-snfi: add EN75xx SPI-NAND controller support   AK Sharma
• [PATCH v2 5/9] net: airoha-eth: add EN7528 Ethernet support   AK Sharma
• [PATCH v2 6/9] mips: dts: add EcoNet EN75xx device trees   AK Sharma
• [PATCH v2 7/9] board: econet: add EN7512 reference board   AK Sharma
• [PATCH v2 8/9] board: econet: add EN7528 board support   AK Sharma
• [PATCH v2 9/9] doc: board: econet: add EN75xx documentation   AK Sharma
• [PATCH v1 00/12] mips: add EcoNet/Airoha EN75xx (EN7512/EN7528) SoC support   AK Sharma
• [SPL] ELF loader support - design discussion   Urvashi Sharma
• [SPL] ELF loader support - design discussion   Urvashi Sharma
• [PATCH v4 0/5] Add fastboot to SPL   E Shattow
• VisionFive 2 eMMC boot issues.   E Shattow
• VisionFive 2 eMMC boot issues.   E Shattow
• [PATCH 0/2] tools: mkimage: add SpacemiT K3 AIHD image support   E Shattow
• [PATCH v3 4/5] CI: Add an sjg-lab job for the Intel Edison   Andy Shevchenko
• [PATCH v3 4/5] CI: Add an sjg-lab job for the Intel Edison   Andy Shevchenko
• [PATCH 0/5] RISC-V SPL: fix OpenSBI FULL FIT loading   Nikita Shubin
• [PATCH 1/5] image: fit: allow IH_OS_OPENSBI in fit_image_load()   Nikita Shubin
• [PATCH 2/5] common: spl: ram: Add LOAD_FIT_FULL support   Nikita Shubin
• [PATCH 3/5] spl: fit: Use map_sysmem() with buffers for fdt address   Nikita Shubin
• [PATCH 4/5] spl: fit: Record loadables to spl_image->fdt_addr   Nikita Shubin
• [PATCH 5/5] spl: fit: Add test to check loadables   Nikita Shubin
• [0/5] RISC-V SPL: fix OpenSBI FULL FIT loading   Nikita Shubin
• [PATCH 02/17] spi: cadence_qspi: enable clock   Ralph Siemsen
• [PATCH 03/17] spi: cadence_qspi: Use APB write protection   Ralph Siemsen
• [PATCH 03/17] spi: cadence_qspi: Use APB write protection   Ralph Siemsen
• [PATCH v2] pinctrl: renesas: r906g032: handle pin subgroups   Ralph Siemsen
• [PATCH v2 0/3] spi: cadence_qspi: clock enable, compatible, write protect   Ralph Siemsen
• [PATCH v2 1/3] spi: cadence_qspi: enable all clocks   Ralph Siemsen
• [PATCH v2 2/3] spi: cadence_qspi: add RZ/N1 compatible   Ralph Siemsen
• [PATCH v2 3/3] spi: cadence_qspi: Use APB write protection   Ralph Siemsen
• [PATCH v2] gpio: dwapb_gpio: Enable all clocks   Ralph Siemsen
• [PATCH v2 0/3] net: add RZ/N1 ethernet drivers   Ralph Siemsen
• [PATCH v2 1/3] net: add r9a06g032 A5PSW switch driver   Ralph Siemsen
• [PATCH v2 2/3] net: add r9a06g032 MIIC driver   Ralph Siemsen
• [PATCH v2 3/3] net: designware: add r9a06g032 compatible   Ralph Siemsen
• [PATCH v2] mmc: zynq_sdhci: support Renesas RZ/N1   Ralph Siemsen
• [PATCH v2] mtd: nand: add Cadence/Evatronix NAND flash driver   Ralph Siemsen
• [PATCH v2 0/8] Renesas RZ/N1 additional drivers   Ralph Siemsen
• [PATCH v2 1/8] board: schneider: rzn1-snarc: set serial number   Ralph Siemsen
• [PATCH v2 2/8] board: schneider: rzn1-snarc: add rzn1.env   Ralph Siemsen
• [PATCH v2 3/8] board: schneider: rzn1-snarc: update MAINTAINERS   Ralph Siemsen
• [PATCH v2 4/8] ARM: renesas: RZ/N1 QSPI controller features   Ralph Siemsen
• [PATCH v2 5/8] ARM: dts: r9a06g032: sync with upstream   Ralph Siemsen
• [PATCH v2 6/8] ARM: dts: r9a06g032: add QSPI controller   Ralph Siemsen
• [PATCH v2 7/8] ARM: dts: r9a06g032-rzn1-snarc: enable new drivers   Ralph Siemsen
• [PATCH v2 8/8] configs: rzn1_snarc_defconfig: enable new drivers   Ralph Siemsen
• [PATCH v2 5/8] ARM: dts: r9a06g032: sync with upstream   Ralph Siemsen
• [PATCH v2] mtd: nand: add Cadence/Evatronix NAND flash driver   Ralph Siemsen
• [PATCH v2] pinctrl: renesas: r906g032: handle pin subgroups   Ralph Siemsen
• [PATCH v2] gpio: dwapb_gpio: Enable all clocks   Ralph Siemsen
• [PATCH v2 1/3] spi: cadence_qspi: enable all clocks   Ralph Siemsen
• [PATCH v2] mmc: zynq_sdhci: support Renesas RZ/N1   Ralph Siemsen
• [PATCH v2] mmc: zynq_sdhci: support Renesas RZ/N1   Ralph Siemsen
• [PATCH v2 4/8] ARM: renesas: RZ/N1 QSPI controller features   Ralph Siemsen
• [PATCH v2 5/8] ARM: dts: r9a06g032: sync with upstream   Ralph Siemsen
• [PATCH] firmware: zynqmp: Remove duplicated sys_proto.h header   Michal Simek
• [PATCH 1/2] xilinx: zynqmp: Setup BOARD_SIZE_LIMIT for mini configurations   Michal Simek
• [PATCH v2] xilinx: versal2: Add PM UFS firmware interface   Michal Simek
• [PATCH] MAINTAINERS: Add missing fragment for Versal Gen 2   Michal Simek
• [PATCH 0/3] ufs: amd-versal2: Cleanup firmware interface   Michal Simek
• [PATCH] MAINTAINERS: Add missing fragment for Versal Gen 2   Michal Simek
• [GIT PULL] amd/xilinx patches for v2025.10-rc3   Michal Simek
• [PATCH] MAINTAINERS: Add missing fragment for Versal Gen 2   Michal Simek
• [PATCH] MAINTAINERS: Add missing fragment for Versal Gen 2   Michal Simek
• [PATCH] MAINTAINERS: Add missing fragment for Versal Gen 2   Michal Simek
• [PATCH 0/2] MAINTAINERS: Cleanup non existing files   Michal Simek
• [PATCH 1/2] scripts: Add MAINTAINERS F: file existence checker   Michal Simek
• [PATCH 2/2] MAINTAINERS: Remove references to not existing files   Michal Simek
• [PATCH 0/2] MAINTAINERS: Clean up AMD/Xilinx fragments   Michal Simek
• [PATCH 1/2] MAINTAINERS: Move u-boot-microblaze to u-boot-amd   Michal Simek
• [PATCH 2/2] MAINTAINERS: Put together AMD/XILINX platforms to one fragment   Michal Simek
• [PATCH 0/3] MAINTAINERS: Cleanup non existing files arch/board   Michal Simek
• [PATCH 1/3] xilinx: Correct zynqmp_r5 MAINTAINERS fragment   Michal Simek
• [PATCH 2/3] scripts: Check F: entries in all MAINTAINERS files   Michal Simek
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Michal Simek
• [PATCH] xilinx: Move u-boot-microblaze to u-boot-amd   Michal Simek
• [PATCH] MAINTAINERS: Remove unused emails   Michal Simek
• [PATCH] MAINTAINERS: Remove unused emails   Michal Simek
• [PATCH 1/2] MAINTAINERS: Use proper Orphan status marking   Michal Simek
• [PATCH 2/2] Clean up emails from non-existing domains   Michal Simek
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Michal Simek
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Michal Simek
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Michal Simek
• [PATCH 2/2] Clean up emails from non-existing domains   Michal Simek
• [PATCH 2/2] Clean up emails from non-existing domains   Michal Simek
• [PATCH] fix non-existing sysam.it domain   Michal Simek
• [PATCH 0/2] MAINTAINERS: Clean up AMD/Xilinx fragments   Michal Simek
• [PATCH] arm64: versal2: Initialize num_banks variable in dram_init()   Michal Simek
• [PATCH RFC] scripts: pass dtc cpp flags via a GCC response file   Michal Simek
• [PATCH] MAINTAINERS: Remove unused emails   Michal Simek
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Michal Simek
• [PATCH 2/2] Clean up emails from non-existing domains   Michal Simek
• [PATCH RFC] scripts: pass dtc cpp flags via a GCC response file   Michal Simek
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Michal Simek
• [PATCH 3/3] MAINTAINERS: Remove references to not existing files   Michal Simek
• [PATCH 1/2] board: amd: versal2: move platform_id/platform_version to .data   Michal Simek
• [PATCH 2/2] board: xilinx: versal-net: move platform_id/platform_version to .data   Michal Simek
• [PATCH v3 4/6] mtd: rawnand: zynq: Do not fail the probe for no reason   Michal Simek
• [PATCH v3 0/6] mtd: rawnand: zynq: Fixes and software ECC support   Michal Simek
• [PATCH v2 6/7] MAINTAINERS: Removed files   Michal Simek
• [PATCH v2 6/7] MAINTAINERS: Removed files   Michal Simek
• [PATCH] net: srand_mac(): fix -ENODEV crash with CONFIG_DM_RNG   Graeme Smecher
• [PATCH] net: srand_mac(): fix -ENODEV crash with CONFIG_DM_RNG   Graeme Smecher
• [PATCH 1/2] net: zynq_gem: plug resource leaks in .probe and .remove   Graeme Smecher
• [PATCH 2/2] net: eth-phy: release the reset GPIO on device removal   Graeme Smecher
• [PATCH] rng: Fix build with SPL/TPL   Jörg Sommer
• [PATCH] nfs: Handle NFSERR_IO as symlink   Jörg Sommer
• [PATCH 0/2] SPI/NOR Flash Fixes   Anirudh Srinivasan
• [PATCH 1/2] mtd: spi-nor-ids: Add variant of mt25qu256a chip   Anirudh Srinivasan
• [PATCH 2/2] spi: dw: Add supports_op function to reject unsupported transfer modes   Anirudh Srinivasan
• [PATCH] iommu: Add RISC-V IOMMU driver   Anirudh Srinivasan
• [PATCH] iommu: Add RISC-V IOMMU driver   Anirudh Srinivasan
• [PATCH] iommu: Add RISC-V IOMMU driver   Anirudh Srinivasan
• [PATCH 2/2] spi: dw: Add supports_op function to reject unsupported transfer modes   Anirudh Srinivasan
• [PATCH v2] iommu: Add RISC-V IOMMU driver   Anirudh Srinivasan
• [PATCH 0/6] video: mipi_dsi: add common {generic,dcs}_write_seq helper macros   Julien Stephan
• [PATCH 1/6] mipi_dsi: add mipi_dsi_{generic/dcs}_write_seq helper macros   Julien Stephan
• [PATCH 2/6] video: panel: hitachi-tx10d07vm0baa: use common mipi_dsi_dcs_write_seq macro   Julien Stephan
• [PATCH 3/6] video: panel: lg-lh400wv3-sd04: use common mipi_dsi_dcs_write_seq macro   Julien Stephan
• [PATCH 4/6] video: panel: mot-panel: use common mipi_dsi_dcs_write_seq macro   Julien Stephan
• [PATCH 5/6] video: panel: renesas-r69328: use common mipi_dsi_dcs_write_seq macro   Julien Stephan
• [PATCH 6/6] video: panel: himax-hx8394: use common mipi_dsi_dcs_write_seq macro   Julien Stephan
• [PATCH] video: panel: Support for startek-kd070fhfid015 MIPI-DSI panel   Julien Stephan
• [PATCH 0/2] Improve logging on missing uclass   Julien Stephan
• [PATCH 1/2] dm: improve logging for missing uclass   Julien Stephan
• [PATCH 2/2] initcall: display error code on error   Julien Stephan
• [PATCH] clk: mediatek: mt8189: add missing qualifiers   Julien Stephan
• [PATCH v2 1/3] serial: mtk: use ulong for clk_rate   Julien Stephan
• [PATCH v2 2/3] serial: mtk: guard clk ops on clk.dev   Julien Stephan
• [PATCH v2 3/3] serial: mtk: return error value from clk_get_rate()   Julien Stephan
• [PATCH 0/2] arm: mediatek: use phase-aware PSCI reset   Julien Stephan
• [PATCH 3/4] pinctrl: mediatek: simplify Kconfig   Julien Stephan
• [PATCH 2/4] pinctrl: mediatek: remove PINCONF conditional compilation   Julien Stephan
• [PATCH 1/4] pinctrl: mediatek: select PINCONF   Julien Stephan
• [PATCH] pinctrl: mediatek: add new mt8366 driver   Julien Stephan
• [PATCH] clk: mediatek: add support for MT8366   Julien Stephan
• [PATCH 0/6] arm: mediatek: Genio 360 EVK bringup   Julien Stephan
• [PATCH 4/6] arm: mediatek: add MT8366 application processor   Julien Stephan
• [PATCH 0/3] net: mediatek: add mt8366 support   Julien Stephan
• [PATCH] spi: mtk_snor: combine mt8188 and mt8189 into mediatek, mt8186-nor   Julien Stephan
• [PATCH 0/7] power: mediatek: add MT6366 PMIC support   Julien Stephan
• [PATCH] phy: mtk-tphy: add v3 hardware support   Julien Stephan
• [PATCH 1/2] dm: improve logging for missing uclass   Julien Stephan
• [PATCH 1/2] dm: improve logging for missing uclass   Julien Stephan
• [PATCH] arm: dts: mediatek: remove mt8188 tphy fallback   Julien Stephan
• [PATCH] arm: dts: mediatek: remove mt6357.dtsi   Julien Stephan
• [PATCH v2] video: panel: Support for startek-kd070fhfid015 MIPI-DSI panel   Julien Stephan
• [PATCH v2 0/3] Improve logging on missing uclass   Julien Stephan
• [PATCH v2 1/3] dm: add dm_err() and a driver model log verbosity choice   Julien Stephan
• [PATCH v2 2/3] dm: uclass: use dm_err() for a missing uclass   Julien Stephan
• [PATCH v2 3/3] initcall: initcall_evt: display error code on error   Julien Stephan
• [PATCH v2 00/14] mediatek: add HDMI pipeline support for MT8188 based boards   Julien Stephan
• [PATCH v2 01/14] video: mediatek: add display pipeline component helpers   Julien Stephan
• [PATCH v2 02/14] video: mediatek: add ethdr component   Julien Stephan
• [PATCH v2 03/14] video: mediatek: add merge component   Julien Stephan
• [PATCH v2 04/14] video: mediatek: add mutex component   Julien Stephan
• [PATCH v2 05/14] video: mediatek: add padding component   Julien Stephan
• [PATCH v2 06/14] video: mediatek: add rdma component   Julien Stephan
• [PATCH v2 07/14] video: mediatek: add smi larb driver   Julien Stephan
• [PATCH v2 08/14] video: mediatek: add dpi1 component   Julien Stephan
• [PATCH v2 09/14] asm-generic: unaligned: add get_unaligned_le24()   Julien Stephan
• [PATCH v2 10/14] include: linux/hdmi.h: add HDMI colorspace and colorimetry enums   Julien Stephan
• [PATCH v2 11/14] video: mediatek: add new hdmi driver   Julien Stephan
• [PATCH v2 12/14] arm: dts: mt8390: add framebuffer and splash reserved-memory   Julien Stephan
• [PATCH v2 13/14] arm: dts: mt8390: add hdmi override node   Julien Stephan
• [PATCH v2 14/14] configs: mediatek: mt8188: enable hdmi pipeline   Julien Stephan
• [PATCH v2 11/14] video: mediatek: add new hdmi driver   Julien Stephan
• [PATCH] mtd: spinand: fmsh: add support for FM25G01B and FM25G02B   Aleksei Sviridkin
• [PATCH 0/4] Add Amlogic T7 (A311D2) and Khadas VIM4 support   Lucas Tanure
• [PATCH 1/4] serial: meson: add Amlogic S4 UART support   Lucas Tanure
• [PATCH 2/4] arm: meson: add Amlogic T7 SoC family support   Lucas Tanure
• [PATCH 3/4] board: amlogic: add Khadas VIM4 support   Lucas Tanure
• [PATCH 4/4] doc: board: amlogic: add Khadas VIM4 documentation   Lucas Tanure
• [PATCH 1/4] serial: meson: add Amlogic S4 UART support   Lucas Tanure
• [PATCH 1/4] serial: meson: add Amlogic S4 UART support   Lucas Tanure
• [PATCH v2 0/4] Add Amlogic T7 (A311D2) and Khadas VIM4 support   Lucas Tanure
• [PATCH v2 1/4] serial: meson: add Amlogic S4 UART support   Lucas Tanure
• [PATCH v2 2/4] arm: meson: add Amlogic T7 SoC family support   Lucas Tanure
• [PATCH v2 3/4] board: amlogic: add Khadas VIM4 support   Lucas Tanure
• [PATCH v2 4/4] doc: board: amlogic: add Khadas VIM4 documentation   Lucas Tanure
• [PATCH] arm64: versal2: Initialize num_banks variable in dram_init()   Pranav Tilak
• [PATCH] fpga: xilinx: Check bitstream length against the supplied buffer   Pranav Tilak
• [PATCH RFC v3 0/2] Modern pinctrl for Exynos5250 devices   Lukas Timmermann
• [PATCH 5/7] arm: dts: add mt6366 PMIC include   Chen-Yu Tsai
• [PATCH v3] usb: mtu3: wait for TX FIFO to drain before disconnect   Marek Vasut
• [PATCH v3] usb: mtu3: wait for TX FIFO to drain before disconnect   Marek Vasut
• [PATCH 01/17] pinctrl: renesas: r906g032: handle pin subgroups   Marek Vasut
• [PATCH 02/17] spi: cadence_qspi: enable clock   Marek Vasut
• [PATCH 03/17] spi: cadence_qspi: Use APB write protection   Marek Vasut
• [PATCH 04/17] gpio: dwapb_gpio: Enable all clocks   Marek Vasut
• [PATCH v3] usb: mtu3: wait for TX FIFO to drain before disconnect   Marek Vasut
• [PATCH v3] usb: mtu3: wait for TX FIFO to drain before disconnect   Marek Vasut
• [PATCH v4 1/2] usb: mtu3: support the upstream devicetree binding   Marek Vasut
• [PATCH 1/2] board_f: Add verbose DRAM layout print option   Marek Vasut
• [PATCH 2/2] arm64: renesas: Enable verbose DRAM layout print on Renesas R-Car X5H R8A78000   Marek Vasut
• [PATCH 1/2] arm64: dts: renesas: ironhide: Describe all reserved memory   Marek Vasut
• [PATCH 2/2] arm64: dts: renesas: ironhide: Describe inline ECC carveouts   Marek Vasut
• [PULL] u-boot-usb/main   Marek Vasut
• [PATCH] cmd: scsi: Drop duplicate leading scsi prefix   Marek Vasut
• [PATCH] ufs: rcar-gen5: Switch from FASTAUTO mode to FAST mode   Marek Vasut
• [PULL] u-boot-sh/main   Marek Vasut
• [PATCH v3] usb: mtu3: wait for TX FIFO to drain before disconnect   Marek Vasut
• [PATCH] mtd: spi: renesas: Align macro prefixes   Marek Vasut
• [PATCH] mtd: spi: renesas: Add R-Car Gen5 DT compatible   Marek Vasut
• [PATCH] mtd: rpc: renesas: Switch to dev_read_addr_name()   Marek Vasut
• [PATCH] mtd: rpc: renesas: Add R-Car Gen5 DT compatible   Marek Vasut
• [PATCH] mtd: cfi: Replace env_get_f() with env_get_yesno()   Marek Vasut
• [PATCH] arm: renesas: Disable MMC support on R-Car R8A78000 X5H Cortex-M33 RSIP port   Marek Vasut
• [PATCH 1/3] arm: renesas: Bind RPC on R-Car R8A78000 X5H Cortex-M33 RSIP port   Marek Vasut
• [PATCH 2/3] arm: renesas: Enable RPC on R-Car R8A78000 X5H Cortex-M33 RSIP port   Marek Vasut
• [PATCH 3/3] arm: renesas: Store env in HF on R-Car R8A78000 X5H Cortex-M33 RSIP port   Marek Vasut
• [PATCH v3] usb: mtu3: wait for TX FIFO to drain before disconnect   Marek Vasut
• [PATCH] ARM: socfpga: fix dead guard on board_spl_mmc_get_uboot_raw_sector()   Marek Vasut
• [PATCH v5] usb: mtu3: support the upstream devicetree binding   Marek Vasut
• [PATCH v5] usb: mtu3: support the upstream devicetree binding   Marek Vasut
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Marek Vasut
• [PATCH v6 1/3] doc: usb: remove obsolete MediaTek MTU3 bindings   Marek Vasut
• [PATCH v6 3/3] usb: mtu3: add SPL gadget support   Marek Vasut
• [PATCH v6 2/3] usb: mtu3: support the upstream devicetree binding   Marek Vasut
• [PATCH v6 3/3] usb: mtu3: add SPL gadget support   Marek Vasut
• [PULL] u-boot-sh/main   Marek Vasut
• [PATCH] board_f: Call initf_malloc() before fdtdec_setup()   Marek Vasut
• [PATCH] doc: ti: k3: Fix pseudo DTS syntax   Marek Vasut
• [PATCH 1/3] arm64: dts: renesas: r8a779g3: Drop generic SPI NOR support on Retronix R-Car V4H Sparrow Hawk board   Marek Vasut
• [PATCH 2/3] arm64: dts: renesas: r8a779g3: Drop invert microSD voltage selector on Retronix R-Car V4H Sparrow Hawk EVTB1   Marek Vasut
• [PATCH 3/3] arm64: dts: renesas: r8a779g3: Drop set VDDQ18_25_AVB voltage on Retronix R-Car V4H Sparrow Hawk EVTB1   Marek Vasut
• [PATCH] pci: Iterate over busses using uclass_foreach_dev_probe   Marek Vasut
• [PATCH 1/3] pci: pcie-rcar-gen4: Switch to generic firmware loader   Marek Vasut
• [PATCH 2/3] pci: pcie-rcar-gen4: Avoid repeated link attempts   Marek Vasut
• [PATCH 3/3] pci: pcie-rcar-gen4: Switch to devm_*() GPIO and reset   Marek Vasut
• [PATCH] doc: board: renesas: Document Retronix R-Car Gen4 V4H Sparrow Hawk SPI NOR layout   Marek Vasut
• [PATCH 1/3] arm64: renesas: r8a779g3: Add PCIe firmware environment on Retronix R-Car V4H Sparrow Hawk   Marek Vasut
• [PATCH 2/3] arm64: renesas: r8a779g3: Add bootloader update environment on Retronix R-Car V4H Sparrow Hawk   Marek Vasut
• [PATCH 3/3] arm64: renesas: r8a779g3: Switch to distro boot command on Retronix R-Car V4H Sparrow Hawk   Marek Vasut
• [PATCH v7 3/3] usb: mtu3: add SPL support   Marek Vasut
• [PULL] u-boot-usb/main   Marek Vasut
• [PATCH] board_f: Call initf_malloc() before fdtdec_setup()   Marek Vasut
• [PATCH] mtd: cfi: Replace env_get_f() with env_get_yesno()   Marek Vasut
• [PATCH 1/6] remoteproc: renesas: rsip: Clear SCMI transport flags   Marek Vasut
• [PATCH 2/6] remoteproc: renesas: rsip: Improve error print   Marek Vasut
• [PATCH 3/6] remoteproc: renesas: rsip: Extract SCP initialization from board file   Marek Vasut
• [PATCH 4/6] remoteproc: renesas: rsip: Reset SCP core on stop   Marek Vasut
• [PATCH 5/6] remoteproc: renesas: rsip: Implement SCMI core stop   Marek Vasut
• [PATCH 6/6] remoteproc: renesas: rsip: Implement core status   Marek Vasut
• [PATCH] MAINTAINERS: Add missing fragment for Versal Gen 2   Marek Vasut
• [PATCH] MAINTAINERS: Add missing fragment for Versal Gen 2   Marek Vasut
• [PATCH] MAINTAINERS: Add missing fragment for Versal Gen 2   Marek Vasut
• [PATCH 2/2] MAINTAINERS: Put together AMD/XILINX platforms to one fragment   Marek Vasut
• [ANN] Further mailman updates   Marek Vasut
• [PATCH v2] pinctrl: renesas: r906g032: handle pin subgroups   Marek Vasut
• [PATCH v2 1/3] spi: cadence_qspi: enable all clocks   Marek Vasut
• [PATCH v2 3/3] spi: cadence_qspi: Use APB write protection   Marek Vasut
• [PATCH v2] gpio: dwapb_gpio: Enable all clocks   Marek Vasut
• [PATCH v2 1/3] net: add r9a06g032 A5PSW switch driver   Marek Vasut
• [PATCH v2 2/3] net: add r9a06g032 MIIC driver   Marek Vasut
• [PATCH v2 3/3] net: designware: add r9a06g032 compatible   Marek Vasut
• [PATCH v2] mmc: zynq_sdhci: support Renesas RZ/N1   Marek Vasut
• [PATCH v2 1/8] board: schneider: rzn1-snarc: set serial number   Marek Vasut
• [PATCH v2 2/8] board: schneider: rzn1-snarc: add rzn1.env   Marek Vasut
• [PATCH v2 3/8] board: schneider: rzn1-snarc: update MAINTAINERS   Marek Vasut
• [PATCH v2 4/8] ARM: renesas: RZ/N1 QSPI controller features   Marek Vasut
• [PATCH v2 5/8] ARM: dts: r9a06g032: sync with upstream   Marek Vasut
• [PATCH v2] mtd: nand: add Cadence/Evatronix NAND flash driver   Marek Vasut
• [PATCH v2 5/8] ARM: dts: r9a06g032: sync with upstream   Marek Vasut
• [PATCH v2 1/3] spi: cadence_qspi: enable all clocks   Marek Vasut
• [PATCH v2] gpio: dwapb_gpio: Enable all clocks   Marek Vasut
• [PATCH v2] pinctrl: renesas: r906g032: handle pin subgroups   Marek Vasut
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Marek Vasut
• [PATCH] arm64: dts: imx: Fix EEPROM address on Data Modul i.MX8M Plus eDM SBC   Marek Vasut
• [PATCH] arm64: dts: imx: Fix EEPROM address on Data Modul i.MX8M Plus eDM SBC   Marek Vasut
• [PATCH 1/2] usb: gadget: f_mass_storage: Remove useless rc variable   Marek Vasut
• [PATCH v2] usb: gadget: f_mass_storage: Move schedule() in sleep_thread()   Marek Vasut
• [PATCH v4 1/3] net: fsl_enetc_xpcs_phy: Extract common PMA MMD init sequence into helper function   Marek Vasut
• [PATCH v4 2/3] net: fsl_enetc_xpcs_phy: Add SGMII 1G support for i.MX95 Ethernet PHY Wrapper   Marek Vasut
• [PATCH v4 3/3] net: fsl_enetc: Add 1G SGMII mode support for i.MX95   Marek Vasut
• [PATCH] usb: ehci-vf: take the controller index from the device tree   Marek Vasut
• [PATCH 3/4] ddr: imx: Allow to call ddr init without logging failure   Marek Vasut
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Marek Vasut
• [PATCH 1/3] usb: ehci-vf: remove the code path for a build without DM_USB   Marek Vasut
• [PATCH 2/3] usb: ehci-vf: drop the empty bind hook   Marek Vasut
• [PULL] u-boot-sh/main   Marek Vasut
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Marek Vasut
• [PATCH 3/3] usb: ehci-vf: take the register bases from the device tree   Marek Vasut
• [PATCH 2/2] usb: ehci-vf: enable the vbus supply of the port   Marek Vasut
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Marek Vasut
• [PATCH v2 2/2] usb: ehci-vf: enable the vbus supply of the port   Marek Vasut
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Marek Vasut
• [PATCH] usb: xhci-mvebu: use regulator_set_enable_if_allowed()   Marek Vasut
• [PATCH v2 0/4] usb: ehci-vf: take the register bases from the device tree   Marek Vasut
• [PATCH v7 3/3] usb: mtu3: add SPL support   Marek Vasut
• [PATCH] usb: xhci-mvebu: use regulator_set_enable_if_allowed()   Marek Vasut
• [PATCH] arm64: dts: renesas: Drop bootph-all from PRR node on R-Car Gen5 R8A78000 X5H   Marek Vasut
• [PATCH v6 01/87] usb: host: re-import xhci-ext-caps.h from kernel v6.16   Marek Vasut
• [PATCH v2] usb: xhci-mvebu: use regulator_set_enable_if_allowed()   Marek Vasut
• [PATCH] usb: xhci-mvebu: use dev_err() instead of printf()   Marek Vasut
• [PATCH v1 1/6] usb: dwc3: core: only provide legacy gadget IRQ handler when USB_DWC3_GADGET   Marek Vasut
• [PATCH v1 2/6] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Marek Vasut
• [PATCH v1 3/6] usb: skip host-only devices when picking the ehci gadget controller   Marek Vasut
• [PATCH v2] mmc: zynq_sdhci: support Renesas RZ/N1   Marek Vasut
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Marek Vasut
• [PATCH v1 1/6] usb: dwc3: core: only provide legacy gadget IRQ handler when USB_DWC3_GADGET   Marek Vasut
• [PATCH v1 2/6] usb: dwc3-generic: fix ref clock lookup indexing wrong clk_bulk array   Marek Vasut
• [PATCH v1 3/6] usb: skip host-only devices when picking the ehci gadget controller   Marek Vasut
• [PATCH v2] mmc: zynq_sdhci: support Renesas RZ/N1   Marek Vasut
• [PATCH v2 3/4] ddr: imx: Allow to call ddr init without logging failure   Marek Vasut
• [PATCH v2 5/8] ARM: dts: r9a06g032: sync with upstream   Marek Vasut
• [QUESTION] Architecture and roadmap for Synopsys XPCS driver with APB3 indirect access   Marek Vasut
• [PATCH v2 4/8] ARM: renesas: RZ/N1 QSPI controller features   Marek Vasut
• [PATCH v2 0/3] Add RITY devicetree preparation support   Marek Vasut
• [PATCH v2 0/3] Add RITY devicetree preparation support   Marek Vasut
• [PATCH v5 2/3] net: fsl_enetc_xpcs_phy: Add SGMII 1G support for i.MX95 Ethernet PHY Wrapper   Marek Vasut
• [PATCH v5 3/3] net: fsl_enetc: Add 1G SGMII mode support for i.MX95   Marek Vasut
• [PATCH next 12/45] doc: board/amlogic: jethub-j100: update product page   Viacheslav
• [PATCH next 13/45] doc: board/amlogic: jethub-j80: use redirect link directly   Viacheslav
• [PATCH v1] env: Fix compile error for envtools   Rasmus Villemoes
• [PATCH 0/3] avb: start handling too small buffer for reading persistent values   Rasmus Villemoes
• [PATCH 1/3] cmd: optee_rpmb: sanitize TEE_ERROR -> E* translations   Rasmus Villemoes
• [PATCH 2/3] cmd: optee_rpmb: try to allocate large enough buffer when reading persistent value   Rasmus Villemoes
• [PATCH 3/3] avb_verify: read_persistent_value: honour contract regarding too small buffer   Rasmus Villemoes
• [PATCH v1] env: Fix compile error for envtools   Rasmus Villemoes
• [PATCH] include/env.h: use plain old #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG   Rasmus Villemoes
• [PATCH v4] Add support for OpenSSL Provider API   Rasmus Villemoes
• [PATCH 0/8] arm: u8500: Enable upstream DT based SD card boot   Linus Walleij
• [PATCH 1/8] pinctrl: Add compact Nomadik pin controller   Linus Walleij
• [PATCH 2/8] mmc: arm_pl180: Configure Ux500 signal direction   Linus Walleij
• [PATCH 3/8] mmc: arm_pl180: Set initial supply voltages   Linus Walleij
• [PATCH 4/8] power: regulator: Add AB8500 AUX3 support   Linus Walleij
• [PATCH 5/8] configs: stemmy: Enable SD card regulators   Linus Walleij
• [PATCH 6/8] configs: stemmy: Boot EFI from external SD card   Linus Walleij
• [PATCH 7/8] arm: u8500: Switch Stemmy to upstream Janice device tree   Linus Walleij
• [PATCH 8/8] arm: u8500: Give Golden panel regulators unique names   Linus Walleij
• [PATCH v2 0/8] arm: u8500: Enable upstream DT based SD card boot   Linus Walleij
• [PATCH v2 1/8] pinctrl: Add compact Nomadik pin controller   Linus Walleij
• [PATCH v2 2/8] mmc: arm_pl180: Configure Ux500 signal direction   Linus Walleij
• [PATCH v2 3/8] mmc: arm_pl180: Set initial supply voltages   Linus Walleij
• [PATCH v2 4/8] power: regulator: Add AB8500 AUX3 support   Linus Walleij
• [PATCH v2 5/8] configs: stemmy: Enable SD card regulators   Linus Walleij
• [PATCH v2 6/8] configs: stemmy: Boot EFI from external SD card   Linus Walleij
• [PATCH v2 7/8] arm: u8500: Switch Stemmy to upstream Janice device tree   Linus Walleij
• [PATCH v2 8/8] arm: u8500: Give Golden panel regulators unique names   Linus Walleij
• [PATCH v2 8/8] arm: u8500: Give Golden panel regulators unique names   Linus Walleij
• [PATCH v2 7/8] arm: u8500: Switch Stemmy to upstream Janice device tree   Linus Walleij
• [PATCH v3 00/11] arm: u8500: Enable upstream DT based SD card boot   Linus Walleij
• [PATCH v3 01/11] pinctrl: Add compact Nomadik pin controller   Linus Walleij
• [PATCH v3 02/11] mmc: arm_pl180: Configure Ux500 signal direction   Linus Walleij
• [PATCH v3 03/11] mmc: arm_pl180: Gate idle card clocks   Linus Walleij
• [PATCH v3 04/11] mmc: arm_pl180: Set initial supply voltages   Linus Walleij
• [PATCH v3 05/11] mmc: arm_pl180: Power down card supplies at OS handoff   Linus Walleij
• [PATCH v3 06/11] power: regulator: Add AB8500 AUX3 support   Linus Walleij
• [PATCH v3 07/11] arm: u8500: Enable SD card regulators   Linus Walleij
• [PATCH v3 08/11] configs: stemmy: Boot EFI from external SD card   Linus Walleij
• [PATCH v3 09/11] arm: u8500: Switch Stemmy to upstream Janice device tree   Linus Walleij
• [PATCH v3 10/11] arm: u8500: Give Golden panel regulators unique names   Linus Walleij
• [PATCH v3 11/11] arm: u8500: Enter fastboot with volume-down button   Linus Walleij
• [PATCH v2 7/8] arm: u8500: Switch Stemmy to upstream Janice device tree   Linus Walleij
• [PATCH v2 7/8] arm: u8500: Switch Stemmy to upstream Janice device tree   Linus Walleij
• [PATCH v4 00/12] arm: u8500: Enable upstream DT based SD card boot   Linus Walleij
• [PATCH v4 01/12] pinctrl: Add compact Nomadik pin controller   Linus Walleij
• [PATCH v4 02/12] mmc: arm_pl180: Configure Ux500 signal direction   Linus Walleij
• [PATCH v4 03/12] mmc: arm_pl180: Gate idle card clocks   Linus Walleij
• [PATCH v4 04/12] mmc: arm_pl180: Set initial supply voltages   Linus Walleij
• [PATCH v4 05/12] mmc: arm_pl180: Power down card supplies at OS handoff   Linus Walleij
• [PATCH v4 06/12] power: regulator: Add AB8500 AUX3 support   Linus Walleij
• [PATCH v4 07/12] arm: u8500: Enable SD card regulators   Linus Walleij
• [PATCH v4 08/12] configs: stemmy: Boot EFI from external SD card   Linus Walleij
• [PATCH v4 09/12] arm: u8500: Switch Stemmy to upstream Janice device tree   Linus Walleij
• [PATCH v4 10/12] arm: u8500: Give Golden panel regulators unique names   Linus Walleij
• [PATCH v4 11/12] arm: u8500: Enter fastboot with volume-down button   Linus Walleij
• [PATCH v4 12/12] arm: u8500: Package Stemmy device trees in FIT   Linus Walleij
• [PATCH 1/1] tools: build mkeficapsule for CONFIG_EFI_HAVE_CAPSULE_SUPPORT=y   Linus Walleij
• [PATCH v5 00/13] arm: u8500: Enable upstream DT based SD card boot   Linus Walleij
• [PATCH v5 01/13] pinctrl: Add compact Nomadik pin controller   Linus Walleij
• [PATCH v5 02/13] mmc: arm_pl180: Configure Ux500 signal direction   Linus Walleij
• [PATCH v5 03/13] mmc: arm_pl180: Gate idle card clocks   Linus Walleij
• [PATCH v5 04/13] power: regulator: Add driver voltage clamp callback   Linus Walleij
• [PATCH v5 05/13] mmc: arm_pl180: Set initial supply voltages   Linus Walleij
• [PATCH v5 06/13] mmc: arm_pl180: Power down card supplies at OS handoff   Linus Walleij
• [PATCH v5 07/13] power: regulator: Add AB8500 AUX3 support   Linus Walleij
• [PATCH v5 08/13] arm: u8500: Enable SD card regulators   Linus Walleij
• [PATCH v5 09/13] configs: stemmy: Boot EFI from external SD card   Linus Walleij
• [PATCH v5 10/13] arm: u8500: Switch Stemmy to upstream Janice device tree   Linus Walleij
• [PATCH v5 11/13] ARM: dts: ux500: Make panel regulators have unique names   Linus Walleij
• [PATCH v5 12/13] ARM: dts: ux500: Harmonize GPIO key names   Linus Walleij
• [PATCH v5 13/13] arm: u8500: Package Stemmy device trees in FIT   Linus Walleij
• [PATCH v5 03/13] mmc: arm_pl180: Gate idle card clocks   Linus Walleij
• [PATCH v5 06/13] mmc: arm_pl180: Power down card supplies at OS handoff   Linus Walleij
• [PATCH v5 07/13] power: regulator: Add AB8500 AUX3 support   Linus Walleij
• [PATCH v5 10/13] arm: u8500: Switch Stemmy to upstream Janice device tree   Linus Walleij
• [PATCH v2 2/2] vexpress64: Correct CONFIG symbol logic around device tree passage   Linus Walleij
• [PATCH v6 00/13] arm: u8500: Enable upstream DT based SD card boot   Linus Walleij
• [PATCH v6 01/13] pinctrl: Add compact Nomadik pin controller   Linus Walleij
• [PATCH v6 02/13] mmc: arm_pl180: Configure Ux500 signal direction   Linus Walleij
• [PATCH v6 03/13] mmc: arm_pl180: Gate idle card clocks   Linus Walleij
• [PATCH v6 04/13] power: regulator: Add driver voltage clamp callback   Linus Walleij
• [PATCH v6 05/13] mmc: arm_pl180: Set initial supply voltages   Linus Walleij
• [PATCH v6 06/13] mmc: arm_pl180: Power down card supplies at OS handoff   Linus Walleij
• [PATCH v6 07/13] power: regulator: Add AB8500 AUX3 support   Linus Walleij
• [PATCH v6 08/13] arm: u8500: Enable SD card regulators   Linus Walleij
• [PATCH v6 09/13] configs: stemmy: Boot EFI from external SD card   Linus Walleij
• [PATCH v6 10/13] arm: u8500: Switch Stemmy to upstream Janice device tree   Linus Walleij
• [PATCH v6 11/13] ARM: dts: ux500: Make panel regulators have unique names   Linus Walleij
• [PATCH v6 12/13] ARM: dts: ux500: Harmonize GPIO key names   Linus Walleij
• [PATCH v6 13/13] arm: u8500: Package Stemmy device trees in FIT   Linus Walleij
• [PATCH v6 04/13] power: regulator: Add driver voltage clamp callback   Linus Walleij
• [PATCH v6 07/13] power: regulator: Add AB8500 AUX3 support   Linus Walleij
• [PATCH v6 02/13] mmc: arm_pl180: Configure Ux500 signal direction   Linus Walleij
• [PATCH v6 03/13] mmc: arm_pl180: Gate idle card clocks   Linus Walleij
• [PATCH v6 05/13] mmc: arm_pl180: Set initial supply voltages   Linus Walleij
• [PATCH v6 06/13] mmc: arm_pl180: Power down card supplies at OS handoff   Linus Walleij
• [PATCH v2] fs: btrfs: fix zstd decompression of compressed inline extents   Qu Wenruo
• [PATCH] fs: btrfs: report file sizes from readdir   Qu Wenruo
• [PATCH] fs: btrfs: report file sizes from readdir   Qu Wenruo
• [PATCH v3 0/3] fs: btrfs: report file sizes from readdir   Qu Wenruo
• [PATCH] riscv: mpfs: Read and store FPGA design information on MPFS hardware.   Nathan Whitehorn
• [PATCH] riscv: mpfs: Read and store FPGA design information on MPFS hardware.   Nathan Whitehorn
• [PATCH] riscv: mpfs: Read and store FPGA design information on MPFS hardware.   Nathan Whitehorn
• [PATCH v2] riscv: mpfs: Read and store FPGA design information on MPFS hardware.   Nathan Whitehorn
• [PATCH v2] riscv: mpfs: Read and store FPGA design information on MPFS hardware.   Nathan Whitehorn
• [PATCH v3] riscv: mpfs: Read and store FPGA design information on MPFS hardware.   Nathan Whitehorn
• [PATCH] net: airoha: fix PCS calibration retry limit   Li Xiao
• [PATCH] wdt: unregister the cyclic when the device is removed   Yuri Zaporozhets
• [PATCH] dhcpv6: support rapid commit dhcp6 option   Yuxiao Zhang
• [PATCH v2] dhcpv6: support rapid commit dhcp6 option   Yuxiao Zhang
• [PATCH] dhcpv6: support rapid commit dhcp6 option   Yuxiao Zhang
• [PATCH] u-boot: fix error check in eth init   Yuxiao Zhang
• [PATCH] u-boot: fix error check in eth init   Yuxiao Zhang
• [PATCH] u-boot: fix error check in eth init   Yuxiao Zhang
• VisionFive 2 eMMC boot issues.   Yao Zi
• [PATCH] clk: spacemit: Fix empty PLL rate table handling   Yao Zi
• [PATCH v2 16/16] efi: LoongArch: Implement everything   Yao Zi
• [PATCH v2] buildman: Differentiate 32-bit and 64-bit LoongArch variants   Yao Zi
• [PATCH v2 3/4] i2c: k1: enable both functional and bus clocks   Yao Zi
• [PATCH v2 3/4] i2c: k1: enable both functional and bus clocks   Yao Zi
• [PATCH v2 0/4] i2c/clk: spacemit: k1: fix I2C bus configuration and clock handling   Yao Zi
• [PATCH v2 14/16] board: emulation: Add qemu-loongarch   Yao Zi
• [PATCH v3 00/19] LoongArch initial support   Yao Zi
• [PATCH v3 01/19] lib: fdtdec: Handle multiple memory nodes   Yao Zi
• [PATCH v3 02/19] linux/io.h: Use map_physmem to implement ioremap   Yao Zi
• [PATCH v3 03/19] image: Take entry point as an output of setup_booti   Yao Zi
• [PATCH v3 04/19] elf: Define LoongArch bits   Yao Zi
• [PATCH v3 05/19] image: Define IH_ARCH_LOONGARCH   Yao Zi
• [PATCH v3 06/19] LoongArch: skeleton and headers   Yao Zi
• [PATCH v3 07/19] LoongArch: lib: General routines   Yao Zi
• [PATCH v3 08/19] LoongArch: CPU assembly routines   Yao Zi
• [PATCH v3 09/19] LoongArch: Exception handling   Yao Zi
• [PATCH v3 10/19] LoongArch: Boot Image bits   Yao Zi
• [PATCH v3 11/19] LoongArch: Generic platform type   Yao Zi
• [PATCH v3 12/19] cpu: Add loongarch_cpu driver   Yao Zi
• [PATCH v3 13/19] timer: Add loongarch_timer driver   Yao Zi
• [PATCH v3 14/19] board: emulation: Add qemu-loongarch   Yao Zi
• [PATCH v3 15/19] efi: LoongArch: Define LoongArch bits everywhere   Yao Zi
• [PATCH v3 16/19] efi: LoongArch: Implement everything   Yao Zi
• [PATCH v3 17/19] doc: arch: Add documentation for LoongArch   Yao Zi
• [PATCH v3 18/19] MAINTAINERS: Add entry for LoongArch   Yao Zi
• [PATCH v3 19/19] CI: Wire up qemu-loongarch64   Yao Zi
• [PATCH v3 10/19] LoongArch: Boot Image bits   Yao Zi
• [PATCH v3 14/19] board: emulation: Add qemu-loongarch   Yao Zi
• [PATCH v3 10/19] LoongArch: Boot Image bits   Yao Zi
• [PATCH v2 0/5] Fix logic of OF_OMIT_DTB and remove useless dts files   Yao Zi
• [PATCH 0/1] arm: socfpga: n5x: Enable system manager driver for N5X   alif.zakuan.yuslaimi at altera.com
• [PATCH 1/1] arm: socfpga: n5x: Enable system manager driver for N5X   alif.zakuan.yuslaimi at altera.com
• [PATCH 0/2] mmc: sdhci-cadence6: fix PHY programming reliability   tze.yee.ng at altera.com
• [PATCH 1/2] mmc: sdhci-cadence6: flush posted writes to PHY registers   tze.yee.ng at altera.com
• [PATCH 2/2] mmc: sdhci-cadence6: wait for the PHY to settle after adjustment   tze.yee.ng at altera.com
• [RESEND PATCH 0/2] mmc: sdhci-cadence6: fix PHY programming reliability   tze.yee.ng at altera.com
• [RESEND PATCH 1/2] mmc: sdhci-cadence6: flush posted writes to PHY registers   tze.yee.ng at altera.com
• [RESEND PATCH 2/2] mmc: sdhci-cadence6: wait for the PHY to settle after adjustment   tze.yee.ng at altera.com
• [PATCH 0/4] mmc: sdhci-cadence6: harden PHY config tables and enable Agilex5 UHS modes   tze.yee.ng at altera.com
• [PATCH 1/4] mmc: sdhci-cadence6: use const PHY config tables with per-call overrides   tze.yee.ng at altera.com
• [PATCH 2/4] mmc: sdhci-cadence6: name PHY and controller config table slots   tze.yee.ng at altera.com
• [PATCH 3/4] mmc: sdhci-cadence6: configure PHY control register per speed mode   tze.yee.ng at altera.com
• [PATCH 4/4] arm: dts: socfpga: agilex5: add SD/eMMC UHS PHY timing   tze.yee.ng at altera.com
• [PATCH v1] part: efi: use BOOT_PART_TYPE symbol   dmukhin at ford.com
• [PATCH v2] pytest: fix out of bounds access to bad_pattern_ids   dmukhin at ford.com
• [PATCH v2] disk: update partition type reporting   dmukhin at ford.com
• [PATCH v1 0/2] reset: small cleanups for x86   dmukhin at ford.com
• [PATCH 0/2] efi_loader: fix GetRng() implementation   dmukhin at ford.com
• [PATCH] configs: sc5xx: set default FDT file   ozndrgt at gmail.com
• [PATCH 1/2] mtd: spi-nor-ids: Add variant of mt25qu256a chip   Takahiro.Kuwano at infineon.com
• [PATCH] cmd: scsi: Drop duplicate leading scsi prefix   neil.armstrong at linaro.org
• [PATCH 0/4] Add Amlogic T7 (A311D2) and Khadas VIM4 support   neil.armstrong at linaro.org
• [PATCH v1 1/1] spi: Add Qualcomm GENI QUPv3 SPI controller driver   neil.armstrong at linaro.org
• [PATCH v1 0/1] spi: Add Qualcomm GENI QUPv3 SPI controller driver   neil.armstrong at linaro.org
• [PATCH v1 1/2] serial: msm_geni: Skip UART TX when no cable is connected   neil.armstrong at linaro.org
• [PATCH] serial: msm_geni: remove unreachable dead code in pending()   neil.armstrong at linaro.org
• [PATCH] riscv: mpfs: Read and store FPGA design information on MPFS hardware.   Conor.Dooley at microchip.com
• [PATCH v2] riscv: mpfs: Read and store FPGA design information on MPFS hardware.   Jamie.Gibbons at microchip.com
• [PATCH] arm: imx: hab: validate HAB M4 event length before memcpy()   ngotra2710
• [PATCH] ram: stm32mp1: bound the invalid-argument message in stm32mp1_ddr_subcmd()   ngotra2710
• [PATCH 1/6] watchdog: wdt-uclass: add get_timeout operation and helper   juuso.rinta at nokia.com
• [PATCH v2 0/5] watchdog: report effective timeout   juuso.rinta at nokia.com
• [PATCH RESEND v2 1/5] watchdog: wdt-uclass: report effective timeout in start print   juuso.rinta at nokia.com
• [PATCH RESEND v2 5/5] test: wdt: add a test for max_timeout_ms   juuso.rinta at nokia.com
• [PATCH v3 0/6] watchdog: report effective timeout   juuso.rinta at nokia.com
• [PATCH v4 0/3] net: fsl_enetc: Add SGMII 1G for i.MX95   alice.guo at oss.nxp.com
• [PATCH v4 1/3] net: fsl_enetc_xpcs_phy: Extract common PMA MMD init sequence into helper function   alice.guo at oss.nxp.com
• [PATCH v4 2/3] net: fsl_enetc_xpcs_phy: Add SGMII 1G support for i.MX95 Ethernet PHY Wrapper   alice.guo at oss.nxp.com
• [PATCH v4 3/3] net: fsl_enetc: Add 1G SGMII mode support for i.MX95   alice.guo at oss.nxp.com
• [PATCH v2 0/4] board: imx93_evk: add i.MX93W EVK support   alice.guo at oss.nxp.com
• [PATCH v2 1/4] imx93: clock: add 900MHz entry to fractional PLL rate table   alice.guo at oss.nxp.com
• [PATCH v2 2/4] imx93: clock: add 450MHz DDR PLL rate   alice.guo at oss.nxp.com
• [PATCH v2 3/4] board: imx93_evk: add LPDDR4X 3600MTS timing tables   alice.guo at oss.nxp.com
• [PATCH v2 4/4] board: imx93w_evk: add board support for i.MX93W EVK   alice.guo at oss.nxp.com
• [PATCH v5 0/3] net: fsl_enetc: Add SGMII 1G for i.MX95   alice.guo at oss.nxp.com
• [PATCH v5 1/3] net: fsl_enetc_xpcs_phy: Extract common PMA MMD init sequence into helper function   alice.guo at oss.nxp.com
• [PATCH v5 2/3] net: fsl_enetc_xpcs_phy: Add SGMII 1G support for i.MX95 Ethernet PHY Wrapper   alice.guo at oss.nxp.com
• [PATCH v5 3/3] net: fsl_enetc: Add 1G SGMII mode support for i.MX95   alice.guo at oss.nxp.com
• [PATCH 11/15] clk: rockchip: rk3576: Fix trivial clock configuration errors   pcb
• [PATCH] clk: mediatek: fix reprobe regression   sam.shih
• [PATCH 2/2] test: dm: nfs: add a regression test for an oversized NFS read length   shj
• [PATCH 2/2] test: dm: nfs: add a regression test for an oversized NFS read length   shj
• [PATCH v2 2/3] net: lwip: wget: free the transfer context after an aborted request   shj
• Re：Re: [PATCH v3] arm: rockchip: spl: Add hotkey detection support.   刘垣辰
• Re：Re: [PATCH v1 1/2] boot: android: Add Android 13+ bootflow support to bootmeth.   刘垣辰
• Re：Re: [PATCH v4] arm: rockchip: spl: Add hotkey detection support.   刘垣辰
• [PATCH v4] arm: rockchip: spl: Add hotkey detection support.   刘垣辰